Firewall Windows with advanced security rules do not take effect immediately?

Similar Questions

• Firewall Windows with advanced security and mmc microsoft management console

  I want to know how to run the MMC snap-in. You load them in the tree of the Console at all times? The center column takes them and then what? This thing is huge and I can't find any questions about it on the community boards. I mean, REALLY, it is complex, and I'm sure that most people do not know how it works. Microsoft Management Console. Snap ins someone explain this - start with - that is meant by the snap ins all about and how to use them. Microsoft has a video to watch? Explain the purposes and uses. And how it relates to Windows Firewall with advanced security?
  I just had a "Nerd" pro retrieves a hacker to my machine. The pirate had resumed MMC and Windows Firewall. I want to learn this now.

  Hello

  Thanks for the display of the query to the Microsoft Community. If I understand correctly, you want to learn more about the Microsoft Management Console.

  You can go through the article and check. Here is another article on the Microsoft Management Console. You can navigate on the article for more information about MMC. Here is some additional information on the addition of the software component Certificates snap-in to an MMC.

  You can also view the request here.

  Hope this information was helpful and let us know if you need help in the future about Windows. We will be happy to help you.

• Firewall Windows with advanced security on Windows 8, lack of predefined rules

  I only noticed the problem initially because the network discovery is disabled, and no matter what I did I could not turn it back on. The necessary services were already running and I could navigate manually to other computers on the network, but they could not see or have access to the mines. I went and checked the Windows Firewall and found that there are no rules, at all. Disable Windows Firewall allows me to turn on discovery network without any problems. Well, I like to keep my operational firewall. After searching online, run the SFC system (with no results), I read that I could use "netsh advfirewall reset" to restore the predefined rules, but I am welcomed the error "a WF (0x3) fatal error has occurred." If it is a virus, I can't find it. Any help is greatly appreciated!

  I found a solution.  Thank you Google.  Sorta scary things hard like that, unknown people but I backed up and it worked:

  http://MajorGeeks.com/tweaking.com_-_Repair_Windows_Firewall_d7237.html
  "After running it (and the boy he gets busy), I could leave"Advanced settings"in the firewall configuration panel 'Restore default policy' and ' import policy" to load one that I could get by exporting it from my backup kicked.  At least now it seems OK and I was able to get us back on the network and turn on sharing.
  This demonstrates a real problem with services like these that you can export only the information an initialized backup and running and not some kind of configuration file that could be found from a mounted backup.  Windows is full of that kind of stuff.

• set_item_property does not take effect immediately

  Hi all
  I use oracle forms 10 g 2. I have a CHANGE after tripping on a text field and under certain conditions, I want to make a button in the same block to be visible. Initially, the visibility of the button is set to 'NO '. So this is my code in the trigger after CHANGE:
  

  begin
            if :XXBG_CE_STATEMENT_LINES_NEW.DOC_TYPE = 'Invoice'   
                then
                   set_item_property('XXBG_CE_STATEMENT_LINES_NEW.INV_DET_BTN',VISIBLE,PROPERTY_TRUE);
                   set_item_property('XXBG_CE_STATEMENT_LINES_NEW.INV_DET_BTN',ENABLED,PROPERTY_TRUE);
            else
                  set_item_property('XXBG_CE_STATEMENT_LINES_NEW.INV_DET_BTN',VISIBLE,PROPERTY_FALSE);
                  set_item_property('XXBG_CE_STATEMENT_LINES_NEW.INV_DET_BTN',ENABLED,PROPERTY_FALSE);
            end if;
  end;

  The 'DOC_TYPE' field is populated through LoV. When I choose "Invoice" button for this field does not appear... I have to open a LoV randomly and then the button appears... Any ideas?
  
  
  
  Thanks in advance,
  Bahchevanov.

  You can try when-validate-item trigger instead of change after and use the same code.

  Hope this helps

• Gether statistical does not take effect immediately

  Queries vary sometimes slow due to no updated statistics. This is usually solved by statistical gether using DBMS_STATS. GATHER_SCHEMA_STATS.
  However, I noticed that I have to run this time or I may have to wait a few moments see queries to a normal return.
  
  Is this happen because of the query plan has been cached? or any other reason? How can I make statistics updates take effect immediately.
  
  Thank you

  Yes, by default, the table statistics regarded as expired if it has 10% or more DML last time statistics run.

  In Oracle 11 g you define the individual threshold on the table plan according to the nature of the tables
  DBA_TAB_STAT_prefs stores the values for each table, and it can be defined by this procedure
  DBMS_STATS. SET_TABLE_PREFS ('OWNER', 'TABLENAME', STALE_PERCENT, value);

  Hope that answers all your questions.

• System refresh actualisations Microsoft Windows Firewall software with advanced opions not found

  Good evening

  When I ask the firewall with advanced fire windows I get the following response: failed to load the snap-snap-in windows firewall with advanced security code error 0xd9 options.

  Thanks for your insights.

  Best regards

  Guy PASCAL

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

  Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below: (en)

  http://support.Microsoft.com/common/international.aspx

• For Windows XP (KB2686509) security update will not install

  I've got 5 responses within 24 hours with the same question - after download from Microsoft Update for Windows XP (KB2686509) security update will not install - be what I need to do? Microsoft will pay attention and come up with a solution?  Anyone know how to reach and motivate the MS to help?

  See:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115C-419D-AC37-03ff8927b79c

• For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

  For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

  Hello

  1. this problem occurs only with this particular update?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 2

  You can read the article.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  When you are prompted, click restart to restart the computer.

  
  Step 2:

  Download and install the update from the link.

  Update security for Windows XP (KB2719985)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

• For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. Operating system MS Windows Vista Home Basic 32-bit SP2

  For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. MS Windows Vista Home Basic 32-bit SP2 operating system.

  Help, please

  Thank you

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Editing audio first in Audition, when the marquee tool, the changes do not take effect or I would like to export.

  Editing audio first in Audition, when you use the marquee tool to get rid of unwanted 'knocking' noise audio, the changes do not take effect or I would export after changes in the spectral display.

  No indication on how to save the changes to the marquee selection tool would be great.

  Hmm.  You did something for the audio in the selection?  It looks not to the file has been modified at all, and the registration option is not enabled, unless a change has occurred.  I suppose you try to remove or reduce the volume of the sound inside the selection rectangle, is that correct?  With this selection, you can press DELETE to remove it completely, or set the volume floating just above the selection of lower button.

  It also seems that you stopped reading, and while that save the selection under will be activated pause, of many other commands will not.

  So, try in the following order:

  1 stop playback.  Is File > Save now activated?

  2. otherwise, do some edit to this file.  You will know that the file is considered 'dirty' when an asterisk * appears next to the name of the file in the files Panel and the top of the editor Panel.

  3. There is no number 3.  I feel confident, one of the first two options will work.  Once the file is saved and overwritten, go back to the first and you should hear the content updated the.

• Firewall Windows with /Microsoft Advanced security management controls

  someone knows any good links for info on this program?  Nothing in the connection security rules, but there are already a lot of incoming/outgoing rules.

  http://articles.TechRepublic.com.com/5100-10878_11-6098592.html

  Link above is using 2-way firewall Vista; If that's what you mean.

  See you soon.

  Mick Murphy - Microsoft partner

• Firewall Windows with Google Chrome problem

  Hello. Earlier today, I open Google Chrome and received one of these guests of firewall Windows that says "Google Chrome" tent of... I accidentally hit always block, instead of always accept and now I can't use Chrome. I get this message:

  NS lookup failed. DNS is the web service that translates the name of a Web site to its internet address. This error is most often caused by the presence of no connection to the internet or a misconfigured network. It can also be caused by a DNS server does not respond or a firewall preventing access to the network of Google Chrome.

  I tried the following, and none of them worked.

  (1) I added Google Chrome to the list of programs supported in Windows Firewall.

  (2) I restored the default settings of the firewall.

  (3) I did a system restore to yesterday.

  (4) I ran my anti-virus software.

  (5) I cleaned my dns cache.

  (6) I unchecked the "use DNS prefetch to improve page load performance" in Chrome.

  Nothing has worked. I know this has something to do with the fact that I told the firewall to block anything that Chrome was trying to do, but I can't seem to unlock!

  Can anyone help?

  Hello

  Because the problem is with Google Chrome I suggest you to post your query in the Google forum to improve assistance:

  http://www.Google.com/support/forum/p/chrome

• Windows 8.1 - secure boot is not configured properly

  Hello everyone. Since I installed Windows RTM 8.1, I kept making a watermark "secure startup is not configured properly" on my machine. The problem is that the secure startup option is enabled in the BIOS (and cannot be changed).

  The problem is that Windows 8 detects that it is not. Any ideas what could be the problem?

  It does not affect my work, but the watermark is very annoying.

  Thanks for the info,

  --

  Robert Iagar

  
  

• Error code: 0xf0f4 and the Windows XP KB2686509 security patch will not install.

  Original title: my PC won't install Windows XP Security patch KB2686509.

  My PC trying to install Windows XP Security patch KB2686509 daily from May 12, 2012 at each time get a 0xf0f4 error message. A lot of very complicated solutions offered on the keyboard files but nothing that a fan of the computer can understand.

  Please can you provide a simple solution to this problem!

  Here is the log:

  8.906: 19/08/2012 19:08:49.125 (local)
  8.906: C:\WINDOWS\SoftwareDistribution\Download\3438087687b5dd8accc81e44f72f02e7\update\update.exe (version 6.3.13.0)
  8.953: DoInstallation: GetProcAddress (InitializeCustomizationDLL) returned: 0x7f
  8.953: impossible to activate SE_SHUTDOWN_PRIVILEGE
  8.968: hotfix started with following command line: - q - z - er /ParentInfo:dfb5f7df1a6cfc4ab8379c8f32fdcb80
  9.093: in function GetReleaseSet, line 1211, RegOpenKeyEx failed with error 0x2
  9.093: in function GetReleaseSet, line 1240, RegOpenKeyEx failed with error 0x2
  12.093: Returns the value of IsMachineSafe = 0
  12.093: IsMachineSafe return 441092
  12.093: condition in Prereq.IsMachineSafe.Section failed with the fist
  12.109: Check condition for 1 line of prerequisite returned FALSE
  12.140: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  12.140: KB2686509 Setup has encountered an error: Setup cannot continue because one or more prerequisites required for the installation of KB2686509 failed. For more details, check the c:\windows\KB2686509.log log file
  12,156: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  12,156: Setup cannot continue because one or more prerequisites required for the installation of KB2686509 failed. For more details, check the c:\windows\KB2686509.log log file
  12,156: Update.exe extended error code = 0xf0f4

  Hi JohnWickenden

  You can read the following article and try the steps to correct known issues with this security update:

  http://support.Microsoft.com/kb/2686509

  Important: The above link contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information, you can view the article:

  How to back up and restore the registry in Windows XP

• Allowing an extension of the application if the firewall of windows 7 - Advanced Security

  Hello

  In the firewall, I block everything out. I'm trying to create a rule to allow "reliability monitor" for internet access. I know I can create a rule that allows the Explorer to access the internet, but I think that allows all windows access to the net. I tested the services with explore when a rule, but none of the obvious services seem to work.

  So I hope that someone knows the appropriate service or can explain how I could grant access to the application extension werconcpl.dll. I'm sure this is the extension that tries to access the web.

  Thank you in advance.

  Wayne

  Hi Wayne,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  It will be useful.