Try using the Vista upgrade disc supplied with the system displays error Windows version is not authentic

Similar Questions

• Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?

  Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?  There is a lot of argument about deplacerb help pages the correct process and commands to use I don't want to do more damage.

  Thank you

  Hello

  I suggest you to visit these links and check if it helps:

  How to install and use the Recovery Console in Windows XP:
  http://support.Microsoft.com/kb/307654

  Description of the Windows XP Recovery Console for advanced users:
  http://support.Microsoft.com/kb/314058

  How to perform an upgrade on the spot (reinstallation) of Windows XP:
  http://support.Microsoft.com/kb/978788

  Check if that helps.

• can I use the same product key once I formatted my hard drive using a vista upgrade disc?

  can I reuse the same product code already used on one computer on another that I put that hard drive and is no longer using vista on this computer, but want to update another?

  If your computer is pre-installed with Vista, it is classified as an OEM license and is not transferable.

  The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  If a license of Vista at retail, you can transfer it to another computer/laptop.
  But it can only be installed on one computer at a time.

  A single license is a single Installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How to use the chkdsk command in windows 7 its not working not not his poster error access denied

  Please help me about the chkdsk command to remove the windows command prompt 7...

  If you try to use chkdsk for C:\ partition, you cannot run that the disc must be disassembled for the operation, which is not possible with the C:\ partition (or the partition where Windows is installed).

  Instead, go on-> do work right click on the partition-> click Properties-> in the Properties dialog box, go to the Tools tab-> under error-checking, click check now... This will automatically set a check the next time you start Windows.

• [TRE] I tried to use the system of TAR utility (compress does not)

  As above, I use system() to call the "TAR" command, it works with - cf, I tried to add compression using - z and the archive has not been created, I use test.tar as the example of name of archive and the file has been created, but it seems to be empty, use it without work - z if.

  zip is there but in/usr/bin, so you can compress in a separate step.

• Failure of the synchronization of the system - protocol error: handheld file could not be opened. (4004)

  
  
  1. download and install to get out of here
  http://nosleepsoftware.sourceforge.NET/index.php?page=FileZ
  2. start get paid and press display and editing files
  3. open the internal folder and type pmtracedatabase and place a check next to him
  4. press details
  5. click on the tab "uploading".
  6. uncheck the box next to backup
  7. click on save
  8 sync

• Error "Windows Media could not find a certificate to connect to the network" when connecting to a secure wireless network with WPA2.

  Original title: I'm having a problem trying to connect to a Windows XP SP2 to a wireless secure with WPA2, had this error "Windows Media could not find a certificate to connect to the network.

  Not Applicable

  Hi StheveOses,

  As Cameron O have rightly said, you must have Service Pack 3 and other important updates installed. If you continue to experience problems with the connection to the wireless network, you will have a quick glance at this article.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  (Works for Windows XP SP3 as well)

  I hope this helps.

• Vista upgrade discs

  Hello.

  My wife and I bought a

  HP Pavilion computer dv6113, which was supposed to happen with a free upgrade to windows vista.  We sent all the documents, including registration, rebates, etc.  We received our rebate, but we never have our Vista Upgrade discs.  Is not not big computer tech that we thought that the XP operating system was just fine and have used it since then.  But now that XP is no longer supported, we are afraid to use our computer for banking, etc., until we have upgraded to Vista.  Is it possible to download the free HP Vista Upgrade we were promised when you purchase the computer?

  Thank you.

  This is NOT official HP customer service and I, like most other people on this forum do not work for HP. It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  Sorry, but the Vista upgrade program ended a few months after Windows Vista came out. The upgrade program was not valid since April 2007 and there is no way to acquire Vista, short purchase. However, I recommend to buy Windows 7 Edition Home Premium instead. Windows 7 is more stable than Vista and will have a longer life of the support.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• When I try to use the Dell reinstallation DVD Windows 7 Home premium SP1 64-bit, it crashes when is about to display the windows logo.

  Re-installing Dell inspiron 19 has windows 7

  People,

  I have a Dell Inspiron 19. The Dell of Dell diagnostics disk utilities & drivers say all right. It is a Seagate 320 GB drive. I installed the drive on another computer and used sea tools to erase the disc.  Then I created a partition and marked as "bootable".

  When I try to use the Dell reinstallation DVD Windows 7 Home premium SP1 64-bit, it crashes when is about to display the windows logo.  A few pixels logo show and then it's there.  Any ideas?  I worked on it for several days.  Really a "stumper" for me and I did something like that for years!

  Original problem seems to be a massive viral infection (owner had no active antivirus software installation!) which led to the non-bootable computer.  After working on this for a while, I decided to just do again it.

  Miles

  Located in the beautiful valley of the Shenandoah in Virginia

  Hello

  Here's how to use the Dell Windows 7 disc according to Dell:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_362048&isLegacy=true

  If you have problems with it, try to Support Dell because it's their software:

  http://support.Dell.com/support/index.aspx?c=us&CS=19&l=en&s=DHS& ~ CK = mn

  Or try the Dell Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  And these are some Vista Forums you are in.

  In Forum Windows 7 install:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

  See you soon.

• No recovery disc supplied with my Satellite P300

  I recently bought a new laptop from Toshiba, Satellite P300. It has Vista installed out of the box, but there is no recovery media supplied with the package. I'm afraid that if something can go wrong in the future, I will not be able to repair my operating system.

  Two questions:
  (1) is this normal that there is no restore disk provided with the Satellite P300? In other words, other customers who bought the same laptop doesn't have that either. Or is it an exception and an error in my local provider. In the manual on the "included in this package" list is any mention of a recovery disc supplied with the package.

  (2) can I get a Toshiba Recovery disk if something is wrong?

  Hello

  > Is it normal that there is no restore disk provided with the Satellite P300?
  Yes, because the laptop was equipped with HARD drive recovery option that allows to recover the laptop from the HARD drive.

  > Can I get a Toshiba Recovery disk if something is wrong?
  There are some pre-installed Toshiba Recovery disc creator software.
  This software creates a Toshiba Recovery DVD. I think that this info was published in the user manual which must be preinstalled on your laptop.

  So, I strongly recommend reading the user manual and to create this DVD of recovery before you change anything on the laptop.

  Cheers mate

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• When I try to use the paint on my computer it says not enough memory or resources

  computer is not enough memory or resources when trying to use paint

  Hello

  1. when it last work very well?

  2 recent changes on your computer?
  3. is this problem only with paint?

  4. what service pack is installed on your computer?

  Method 1:
  If you receive the error message above when opening a bitmap in Microsoft Paint, the only resolution at this time is to open the bitmap file in another program. I suggest you perform the steps to fix:
  a. open an existing bitmap.
  b. in the Image menu, click attributes.
  c. click on default and then click OK.
  d. on the file menu, click Save as and save the bitmap with a new name.
  e. close and restart Paint.

  Method 2:
  If this step does not help then you can perform a System File Checker on your computer and check if it works.

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.  You can check the link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Once the SFC scan is complete, you can also try running these two commands at the elevated command prompt.
  a. right click on command prompt and open it as administrator
  b. run the two commands regsvr32 /u zipfldr.dll and regsvr32 /i zipfldr.dll

• Error when you try to use the system restore: 0x8004230f

  whenever I try to open system restore, I get the error code 0 x 8004230f, I did the SCF scan to see the number of files that could not be fixed what should I do now?

  I installed Norton utilities 2011 & Norton anti virus

  Hello

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• try to join vista 64 bit Busines with w2k3 Server domain

  try to join vista Business 64-bit with w2k3 Server domain after that I use/computer/attached properties to a domain, the connection is up, I used the administrator and the password of the domain error appears:
  The following error occurred attempt of joining to the domain "PA10:
  The specified server cannot perform the requested operation.

  He has worked on 3 of my xp pro version only on my vista can't go the same problem on my case mandriva samba samba share find vista Server it list all other sysdems in my network research all the ports are open in my firewall for samba (UDP 137/138 TCP 139/445

  Hello

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question here: http://social.technet.microsoft.com/Forums/en-US/category/windowsserver

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error 'System restore running system' starts with a black cursor screen while trying to use the system restore

  Original title: unit hanging in the middle of the restoration of the system

  Message "System restore running system" starts with a black screen with cursor, but does not move forward.  Windows Vista question

  Have you tried F8 solutions and when I select the system restore it gives me the message above and goes to the black screen even ugly.

  How did I break the loop so I can start a new system restore?

  Hello

  Are you trying to restore your computer or you try to create a restore point?

  Step 1 or 2 can help you to restore your computer.

  Step 1: Try the steps in the section below, if you haven't tried it.

  Start the restore of the system from a command prompt
  http://Windows.Microsoft.com/en-us/Windows-Vista/Start-System-Restore-from-a-command-prompt

  Step 2: Try restoring the system from the recovery console.
  Reference: http://windows.microsoft.com/en-US/windows-vista/What-are-the-system-recovery-options-in-Windows-Vista

  Step 3: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Similar problem: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/system-restore-wizard-is-already-running/c797baf7-c069-4e3a-894a-e9644cc6df0b