The headset port sometimes works

Similar Questions

• Satellite U200 - cannot get the LAN port to work

  Hello

  I hope someone can help. I reloaded a new version of windows on my laptop, I don't have the recovery disk but downloaded all the drivers from this site. However, I can not the LAN port to work. I tried several times to install the driver but no luck. In the Device Manager, it says device cannot start for the Intel 82559 fast Ethernet LAN on motherboard.

  Can someone please offer some advice? I am a person of correct PC then understand the concepts and can get around the windows.
  Thank you

  Satellite U200 what model do you have? The number of other Sat U200-xxx would be very useful to know which LAN chip was equipped with your laptop.

  But generally, you can find all the drivers on the European driver Toshiba page.
  Check the model number and serial (bottom) and choose the correct LAn driver Toshiba page.

  Notes; Win XP should be updated to the last State. I mean that you need SP2 and the additional fixes to ensure that everything would be fine.

  Good luck

• SQosmio G50 - 10 H - one of the usb ports stopped working

  Hello forum,.

  I have a BOUNCING problem with usb ports on my qosmio g50-10 h.
  There are two ports on the right side of the machine and I have 2 self-powered 7 centers of port (usb 2) attached to these.

  Every now and then to stop it from ports and of course all the parts a unregcognised, not found.
  I get error messages saying unregognised device or usb device stopped working or windows stopped device etc.

  Unplug the hub and repluging it ususally actually come back to life.

  any ideas?

  Stafford

  Hello

  Have you tried to connect devices directly to the USB port?
  Try this and see if the USB device is disconnected, as you mentioned that using the external USB hub.

  Generally speaking, it is difficult to say what might cause this
  You could try updating the chipset driver.
  Of course, you should also check the USB port settings, and power management options for economy.

  In device manager-> USB root & hub-> properties you could disable for unique energy saving USB ports.
  This also on Win 7 power management.

• Could not get the HDMI port to work on the HP touchsmart.

  I have a HP Touchsmart 600-1265 with an HDMI port. I have connected the computer to the TV but can not get any audio/video to display. I don't know if you need to activate the port or what you need to do to make it work.

  When I push the A / V button above the HDMI port it shows the computer displays and below, it is then them a VGA and HDMI boxes but when I scroll down and select HDMI the screen just empties for a few seconds and then back on the computer screen.

  What should I do to make this work?

  Yes, the entry also. This is what the switch you mentioned.

  See you soon,.

• Cannot get the USB port to work after re-installation of SP2 on Satellite Pro L20

  After re - install XP Home SP2 and download all updates & drivers from here, I can't get my USB port works correctly, if I have more than one connected device it says "bandwidth exceeded".

  I have a Behringer BCD2000 which is a souncard/midi controller for DJ, mixer, he has worked before I reinstalled windows, now that it snaps and POPs playing tunes, ASIO does not work when I start Traktor (Dj software) and the program crashes. Any other external sound card does not work. I've been through the Device Manager, no conflicts outside! during the series under the devices hidden.

  I am lost, my only option, buying a card PCMCIA sound card, it worked fine before as surely as it is a software solution for this?

  If anyone can help I would be very grateful.

  And what model of laptop you have exactly? As far as I know Toshiba has produced many different Satellites in the last ten years.

• Microsoft headset - I installed Microsoft LifeChat 1.4 but when I play music the headset does not work

  I installed my microsoft lifechat 1.4 I can receive my microphone, but when I play my music, it does not work

  Hello

  ·         Never work earlier?

  Check to see if this article helps you.

  Activate the sounds in the LifeChat headset

• How can I fix the USB ports on work for Vista?

  I have Windows Vista basic and USB does not work for all devices when they are plugged in. I get the message "devices connected to the computer USB has malfuctioned and Windows does not. "I also noticed that in the pilot do message"No driver for this device"Port_ #001.Hub_0007 ' if plug all devices including a USB key or a mouse, goed by single power. Any ideas how hard to pull of this problem.  Thanks in advance

  You can try to go to Device Manager and uninstall all the drivers remove all listed (only the hubs and not others) cos of your terminal and restart your computer. After restarting plug your rear hub.

• ENVY Audio m6 on the headset does not work

  Hello, I have a problem with my laptop HP ENVY (running Windows 8) m6 about her on my helmet. Just as recent as today, when I plugged my headset no sound came through. I tried another pair, but got the same result. This laptop is only about 4 months and a half old (he got to mid-January), and it is a real disappointment. Any help would be very nice, and I am very well with several suggestions. Thank you in advance!

  I had the same problem. Just now solved by following the steps in

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/no-sound-from-headphone-jack/8a152305-bbb4-42E4-8030-bfdf31216758

• all characters replaced by square with two zeros on the top and a number below, works ok when uninstall it, reload and start the first time, after that the problem reappears. sometimes works first time to reboot. IE and Chrome ok, light running. v 7, wind

  Set up of fonts etc seems to be ok, still had problems with plug-ins disabled

  Try to set the pref gfx.font_rendering.directwrite.use_gdi_table_loading false on the topic: config page.

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed also show "BOLD" (user set).
  • Preferences can be reset to the default value using the context menu if they are set of users
  • Preferences can be changed via the context menu: Edit (string or integer) or toggle (Boolean)

• The LAN on an Express port still works as a LAN port when in mode "extend the Wi - Fi network"?

  Assuming that the current versions of all units in the airport:

  If you have an extreme as your primary access point, and you have an Express "extend a Wi - Fi network" mode, the LAN on the Express port still works as a LAN port?

  Yes. You can connect any Ethernet device to that port.

• my microphone has stoped working on the headset once I plugged the camera.

  Original title: helmet does not

  My headset was working fine, after I pluged in my cam stoped working microphone. I unplugged the cam, but I cannot get my microphone to work. Any idea?

  Hello

  Thanks for choosing Microsoft Community!

  If I understand correctly, the microphone of the headset does not work.

  Please answer these questions to better understand the issue:

  1. What is the brand and model of computer headset?

  2 - does it not work on a particular application like Skype?

  We defer the following methods:

  Method 1: Run the following fix - it:

  Automatically diagnose and fix problems of Windows audio recording:

  http://support.Microsoft.com/mats/AudioRecording/

  Method 2: See the steps mentioned below and verify that the default audio device is properly set:

  a. Open Sound by clicking on the Start button, then Control Panel. In the search box, type sound, and then click sound.

  b. click on the recording tab, click on Microphone and then click Properties.

  c. click the levels tab and make sure the mute button is off, so now to click on it to activate the sound for this connection and then click on apply.

  d. to listen to the sounds of the microphone through your speakers or headset, click the listen tab; Click on listen to them this peripheral box.

  e. also click on the Advanced tab, click to clear applications to allow him to take exclusive control of this peripheral box and then click OK.

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• The mouse no longer works on Satellite Pro A200-1F9 (on Windows and Linux)

  Hello. Suddenly, my USB mouse doesn't work on my satellite pro A200-1F9 laptop. I had this same problem on my Linux (Ubuntu Feisty) for the last week or two, but today was the first time that the mouse no longer works in Windows. Ideas for what's gone wrong? (If I boot Linux with the attached mouse, I get an error message when loading upward.) The mouse does not work it is logged at startup or I plug it later).

  Under Windows and Linux, the laptop still recognizes my external HD which also has a USB connection...

  Thanks, Shoko.

  In my opinion, you should test the USB feature. If you are 100% sure that the USB ports are working well check your mouse or try to use the other.

  Laptop mouse pad still works?

• Equium A60 - 692 USB Ports not working not

  Hi all - new to the forum and what a good place to find info on Toshiba laptops. Anyway - after a recent storm, I lost connection to my ISP broadband - contacted the helpline who advised me to Exchange my ADSL modem to an Ethernet - made and corrected the connection problem - however - only after having it done I realize has none of my devices (printer, camera, Web Cam etc.) worked via the USB ports. I've uninstalled and reinstalled the system and drivers for devices without result. The device displays 500ma of power manager is available for each of the 3 ports but watch 0ma used. The Device Manager also shows that the USB ports are working properly. Can someone help or advise if these ports on a separate card or they are part of the motherboard. If Yes, where can I get a. Congratulations to all - Andy

  A lighting strike is not good news, if she gets hit by a kind something can go wrong. My guess is that your laptop USB ports has taken suddenly by a massive power surge that probably damaged the chips inside. It could be a Windows problem, or not the only thing I could suggest is to use a bootable Linux such as Knoppix CD and run a command called usbview with some USB devices.
  If the USB has been confirmed dead then your only option is to use an adapter CardBus USB 2.0 providing your CardBus slot is not damaged too.

  Richard S.

• 8.1 Windows 64 - bit 3 USB ports not working not

  I have a model computer T430s 2352CTO, running Windows 8.1, 64-bit version. Before upgrading Windows 8.0 all drivers have been updated. The USB ports 3 worked properly, in particular an external hard drive of 1 GB running. After the 8.1 update, 3 USB ports work always, but only for about 30 seconds, then the hard drive stops. The power led remains on the hard drive, but it no longer displays in windows Explorer.

  In Device Manager, I'm gone to Bus USB-> USB controllers Root Hub-> properties-> (under general it says "this device does not work correctly)-> Power Management-> unchecked the box"allow the computer to turn off this device to save energy. Unfortunately, it doesn't seem to stop the problem. Any ideas?

  Please try this:

  http://blogs.msdn.com/b/usbcoreblog/archive/2013/11/01/help-after-installing-Windows-8-1-my-USB-DRIV...

  Thank you!

  Houman

• HP Pavilion G6-2146sl: HP Pavilion G6-2146sl left USB ports not working not

  Hi, I have a HP Pavilion G6-2146sl with Windows 7 Ultimate x 64... my problem is that the two left USB ports stopped working properly: for example, when I insert a USB flash drive lights up but it is not recognized by Windows. Is the only port that works on the right side of the laptop. I tried to do a search of driver, but Windows cannot find driver. Here is a screen of my Windows device management:

  

  Thank you in advance for your help and sorry for my bad English, I'm Italian.

  Hello

  AMD AHCI, USB 3.0 chipset and RAID drivers