The infamous battery HP Mini saga continues...

Similar Questions

• Satellite on Mini L9W - B - the Tablet battery is empty

  I have my mini click for a day and my Tablet battery is empty, while the keyborddock battery is always 100%.
  Click mini says I need to load. Why can I not use the keyboarddock battery?

  Please check your BIOS version.
  There is a new BIOS v1.7, which solves the problem with the keyboard dock charger status which was not recognized by the system of window correctly.

  You should also know that the battery
  #1 refers inside the Tablet and the battery
  #2 refers to the battery in the keyboard docking station.
  The battery status can be checked in the Windows Mobility Center window.

  When you use the tablet with the keyboard dock, the second battery (battery inside the keyboard docking station) is the first source to power! It also happens that the battery could offload deeply
  In such cases, it of needed to keep the dock Tablet and keyboard to recharge for at least 24 hours.
  The tablet should be connected to the power adapter and moored at the keyboard docking station.

• Repair Windows installation will not continue beyond the mark of 26 min during fill the stage of installation

  Hi there all your PC gurus

  PC fails to complete a repair of Windows XP installation. It does not go beyond the mark of 26 min during the installation phase ends. You can still move the mouse around, however installation is not continue beyond this point.

  The 2 following errors are received:
  Error installing com +.
  "of the subcomponent com + threw an exception during the processing of the OC_complete_installation Setup message.
  d:/xpsp/com/com1x/src/complussetup/Comsetup/csetuputil.cpp (line 3429)
  Error code = 0x8000ffff
  Castastrophic failure
  Cannot run the function ' DllRegisterserverc)' in
  c:/Windows/System32/clbcatq.dll ".

  Corrupted file Unregmp2.exe
  The file or the directory c:/documents and settings by default/user/start menu/programs/windows Media.lnk is damaged and unreadable. Please run the chkdsk utility. »

  PC is a Dell Vostro 1510, it is only a couple of years.

  Can someone please?

  The initial problem was that the PC did not go beyond the page of Windows to start upward. So I had to do an installation of the Dell windows XP disk repair. But I couldn't boot from the CD, (even after changing in the system BIOS boot order) to work around this problem, so I had to disable the boot on the other upward options being - HDD, USB etc. so only if it start from the disc.

  After completing the first part of the repair facility, the PC restarted to complete the second part of the installation, however I got an error message "the Kernel32.dll file is possibly corrupt. The header checksum does not match the checksum calculated.

  After some research, I solved this problem by using the windows recovery console to extract a new copy of the kernel32.dll from the windows XP disc. It seemed to work. The second part of the window repair facility restarted successfully, but now the problem is it will not complete installation, it gets stuck/not will not go beyond the 26 minute mark during the phase of "complete installation."

  It has been full of hiccups. I'm not a person of computer tech at all, but have managed to get so far at this stage.  Can someone please please help, very much appreciated.
  Thanks :)

  Hello

  Follow the steps from the link: you receive the error message "UNREGMP2." EXE - Entry Point not found"when you upgrade or repair Windows XP: http://support.microsoft.com/kb/889288

  You can also try the steps from the link which is very useful for troubleshooting Windows XP startup problems:

  How do I recover from a corrupted registry that prevents http://support.microsoft.com/kb/307545 of Windows XP startup

• Having a computer, HP mini 110-11 that I had to reset the cmos battery,

  I had to reset the cmos battery, now it asks for password. Need help to find one that suits. After that 3 trys happens with password check failed, fatal error... the system shut down CNU946C2FB

  Hello

  Please try (all lower case):

  e9lovge78p (3rd tank is a tiny l).

  Kind regards.

• Battery problems with the new Satellite click Mini

  Hi guys,.

  my camera is completely discharged which was quite annoying. So I rebooted the tablet to 100% and the keyboard battery was at the time, reading 100% load. Applied bios update 1.70, after startup, the keyboard battery showing 0%. Now it will not charge, the Tablet is 100% and Windows reports battery 2 loads but it remains at 0%.

  There is a sharp screeching electric from the keyboard dock? Would it be a bad battery? Or is it so deeply discharged it will not charge?

  Thanks in advance

  If the battery is deeply discharged, you must hold the power adapter plugged in for at least 24 hours...

  But the sharp wail of electric from the keyboard docking station seems really strange...
  I can imagine that there is some lose connection or a hardware problem...

  In any case, Tablet must be connected to the power adapter and docked to the docking keyboard while loading... Please also make sure that the Tablet is TURNED off (press and hold the button to turn off the Tablet 10-15 sec)

• Rest of the BIOS for HP Mini 1020LA password

  Hello world

  Today I received a used HP MINI from one of my friends and it has locked BIOS I took the laptop goes to remove the CMOS battery and I was still unable to issue ressolved. I will paste the screen that I continue to see below

  Any information would be great! Thanks for the help!

  http://imgur.com/5O9Vjqc

  Hello

  Please try (all lower case):

  e9luvvq05g (3rd tank is less than L and 8 char is a zero).

  Kind regards.

• Satellite L500-1KK - how to the maximum battery time?

  Hello

  1. it is indicated on the product specifications L500-1kk expected autonomy is about 03:20 Hrs use mobile brand! However, I was using my laptop for almost a year now, the maximum battery time I get is 02:15 Hrs, whenever I load my mobile suit, the battery still bar program shows me this maximum time remaining! I use the default power settings!

  2. most intriguing, is that my sister used another laptop, its battery is approximately the same capacity that mine, around 43200 mWh, us both using Windows 7 Ultimate (she 32bits, I, 64-bit version), but its battery time is at least 4.5 Hrs. Why is this, and how I would maximize my battery time!

  3. Finally, her laptop is new (4 months, yet battery pro program shows that the battery wear rate is 7%, my laptop is almost a year and it shows a wear rate of 1.3%, I use mostly my laptop while the power is plugged in, unplugged rarely!) Is their an explanation to the different rates of wear?

  Thank you

  Hello

  To be honest, I think a battery about 02:15 hours is good and I think that everything is ok with your laptop. My new Satellite A500 I also only 2.5 hours if I running on battery, sometimes less than 2 hours or less. That s always according to the applications you run.

  > 2. More intriguing, is that my sister used another laptop, its battery is approximately the same capacity as mine, around 43200 mWh, we're both using Windows 7 Ultimate (she 32bits, I, 64-bit version), but its battery time is at least 4.5 Hrs. Why is this, and how I would maximize my battery time!
  Well, it s the same you compare two cars with the same ch from different manufactures a car's fuel consumption higher than the other car, even it have the same hp. Why? Well, the different manufacturers using different parts: other tires, gears, weight, dray of air, etc.

  You can compare two identical notebooks or cars from the manufacturing even to find a problem, but * not * from different manufacturers. ;)

  Last but not least, this could be an interesting document:
  http://APS2.toshiba-tro.de/KB0/HTD9401AZ0001R01.htm

• Smart battery business effects on the phone battery?

  Hello

  What is your contribution regarding the effects of the case continually recharges the phone?

  First of all, I'm confused that the case feeds the case when the phone is 100% or if it is just trickle charge the phone and keep it 100%. I read a few articles such as (http://fortune.com/2015/12/14/apple-iphone-battery-case-review/) saying that the case battery fully powers the phone. However, I have reason to believe that the case is simply trickle charge the phone.

  If the case was simply charging the phone on charge of compensation, he would have no adverse effects on the long-term phone battery? As (http://www.powerstream.com/li.htm) and (http://batteryuniversity.com/learn/article/charging_lithium_ion_batteries) does point out that trickle charge a Li-ion battery can have negative effects on the battery. I much prefer fresh case of how Mophie battery, I can turn it on when I want to and end it before 100%, but I prefer by far holding the handle of the smart case in my hands.

  The management of the battery of the phone is very smart. When the battery reaches 100%, it stops to load. Completely. When the phone is 100% power is connected powering the phone, and the battery is ignored. If you could leave it plugged into the wall for weeks without interruption, and it wouldn't hurt anything. In fact, you SHOULD leave plugged in overnight, every night and allow automatic backups iTunes via WiFi or iCloud. In this way the most you can lose is a day data.

  As a result, the case feeds the phone up to exhausts its battery, then the battery takes over. If the battery is not fully charged when you connect the case he will first charge the battery.

• Pavilion dv6 2170 clock problem after replacing the CMOS battery

  Hello world. Sorry for my bad likely English

  OK, so the problem started since I changed my laptop CMOS battery. and to be honest it wasn't whit any problem the clock when I replaced it but I if this may be the cause of another problem that later I figuered what the problem was because of the RAM.

  in any case, I changed the Rams and this problem has been resolved. I just set the clock of the BIOS and rebooted the system. After awhile I figuered that windows clock is not fair. I restarted again and saw the BIOS clock. It has been reset for 2009! even when the laptop battery and power supply are attached the BIOS and windows continues to change clock! I even changed my windows and I replaced the CMOS battery with the former, but nothing helped. It seems really strange, but I don't think it's maybe a hardware problem there a driver or something for the CMOS battery... need your help! Thank you!

  You mentioned that the BIOS has been reset for 2009? This means that there is a problem with the current or any leak and the BIOS has been "reset" back at the root of the plant. I'm afraid you have shorted something when you changed the battery not be grounded.

  Worst case is that there is physical damage to your motherboard and there is nothing you can do about it, probably broken a capacitor - who cannot hold a charge to prevent the reset of the BIOS clock.

  However, you can try this.

  Completely, unplug your computer, remove the laptop battery, etc... Then browse 'Guide' your computer for the "hard physical reset" for your CMOS. I don't know what it's like on a laptop, I only did it on desktop with riders. Be sure to follow the directions precisely.

  -Make sure you are properly grounded. touch the metal parts that is grouned before touching anything on your computer.
  -the hard reset should be done for at least 30 seconds, this ensures that the power is completely served the system. Then you can set this back.

  Try this a couple of times, first without removing the CMOS battery and 2nd time after remove CMOS battery and placing it in.

  Good luck.

  BTW, you can also try running without your new memories (if there is more than 1 stick, try them separately). In fact, I would probably try first before doing a hard reset CMOS. The reason why I didn't say earlier, it's because I have assumed that you already tried this.

• Cannot install "island extreme Stunts." game error an another Version of this program is already installed program is already installed. The installation of this version cannot continue.

  Original title: another Version of this program is already installed

  I decided to install an old game of mine - island of extreme aerial stunts.

  While trying to install it, I get the error that another Version of this program is already installed. The installation of this version cannot continue.
  It is not in my program list, and I can't get rid of the error.
  I have used before and uninstalled fine.
  Specifications of the PC:
  OS: Windows XP SP3
  Type: Home Edition
  Graphics card: NVidia GeForce FX 5500
  In any case to fix / install?

  Hello

  1. is the issue limited to this program?

  2 are you able to install other programs on the computer?

  You can try the steps in the link below to fix the problem.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

• I get an error message: The Nvidia OpenGL driver lost connection with the display driver and can not continue. Error code 8

  When I play the virtual Interactiver - Second Life Community. The screen turns white and windows tells me the display adapter stopped responding and has recovered. While the second life Viewer is still Virgin (white). I get the error in a box: The Nvidia OpenGL driver lost connection with the display driver and can not continue. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code 8. Now, I worked with Nvidia to do a clean install of the latest version of the driver. a driver in safe mode installation. They suggested to try an earlier version of the driver. Nothing that they worked me and told me to see Microsoft. The pilot hangs every 30 min or so, all online in the second game of life. Can someone help me?

  Information System
  ------------------
  Time of this report: 13/06/2011, 19:40:20
  Machine name: BEN - PC
  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
  Language: English (regional setting: English)
  System manufacturer: HP-Pavilion
  System model: GC670AA-ABA a6120n
  BIOS: Phoenix - AwardBIOS v6.00PG
  Processor: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz (2 CPUs), ~2.0GHz
  Memory: 4096 MB RAM
  Available OS memory: 3582MB RAM
  Page file: 1690MB used, 5472 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  User DPI setting: 96 DPI (100%)
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  Two monitors

  Display devices
  ---------------
  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1600 x 900 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: G205H (Acer)

  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1280 x 1024 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: NEC LCD7V

  Hello

  I suggest that you have watch the following link below:

  http://forums.developer.nvidia.com/index.php?showtopic=5331

  I hope this helps.

• There's the iPhone battery chargers 5 that use no electricity.  For use in a power failure.

  There's the iPhone battery chargers 5 that use no electricity.  For use during a power failure.

  Your best bet is an accumulator.  I have one I got on Amazon by EC Tech.  It is a brick, but it will charge my iPhone and the iPad, if the current is cut off.  You just need to load the brick and keep it in an emergency.

• I get no picture on the TV when using mini ipad with the Digital AV adapter.

  I get a white on my TV screen when I connect my mini ipad digital AV adapter except HDMI 1 showing in the upper left corner of the TV screen. My mini2 ipad works great with the same son and TV.  I tried two ipads with different TV but get the same result. The ipad mini works OK if not connected to the TV. Two minis are working on the same operating system setting.

  The Digital AV adapter can be finnicky.

  Have you tried simply unplug and plug the adapter with the HDMI cable connected with it?

  With the adapter always plugged into your iPad, have you tried a hard reset of your iPad by pressing the sleep/wake and Home buttons simultaneously until your iPad goes to the dark and restarts with the Apple logo, then release them buttons?

  Good luck!

• iPhone 7 more draining the extreme battery

  I got my iphone 7 more for 5 days and have all of a sudden severe battery drain issues. I'm talking to death in 4 hours with no use.

  -All liquid apps

  -Battery screen indicates the drain comes from "home & lock screen.

  -The phone will not auto lock on any time setting

  -Disabled "raise to wake up" and not change

  -When I manually lock the phone, battery drain happening again

  -My phone is getting really hot during the evacuation with the screen off

  -My watch empties as soon

  -J' I restarted my phone and look twice

  -Phone is struggling to load faster than battery drain

  Anyone else having these issues? What can I do else?

  You're not alone: Re: iOS 10 battery draining / overheating

• How to upgrade my Quicktime 7 Player Quicktime 7 Pro? I am trying to upgrade the application Quicktime 7 and he continues to send me to this information page unrelated to an upgrade or buy and download option.

  I'm trying to upgrade to Quicktime Pro in the Quicktime 7 application and he continues to send me to this information page unrelated to an upgrade or buy and download option. How to upgrade my Quicktime 7 Player Quicktime 7 Pro?

  Unless you already have a QuickTime Pro key, you can't. Apple stopped selling them.

  If you do open it, choose recording in QuickTime Player 7 menu and put your key.

  (143612)