The initialization of the root of records

Similar Questions

• Get file metadata or the record broken for the root directory

  I used this method to get the metadata from the a site's root directory, it worked last week and now it has stopped working access to the root directory only, other directories are very good.

  http://docs.BusinessCatalyst.com/dev-assets/reference#! / api-settings/system/get-file - folder - info.html

  Navigate to the root directory

  "/ api/v2/admin/sites/current/storage /? meta' - used to work (now get a 403 Forbidden error)

  "/ api/v2/admin/sites/current/storage/images /? meta'-(par exemple) works very well.

  Please fix it as soon as POSSIBLE.

  Hot-patch has been deployed successfully, the problem should now be resolved.

  Cristinel

• How to share the root of a hard disk in Win7?

  I am able to share a folder, but cannot share the root of a hard disk. Homegroup is off.  In addition, even if I have the password to 'OFF' I always get invited to do since the XP computers on the network, but not Vista computers. Weird?

  Win7 computers have full access to the C:\ root on Vista and XP in network of machines. But on computers Win7 the C:\ root is blocked. How to open readers for full access. I worked with permissions in fsmgmt.msc without a bit of luck. What is going on. It is not that difficult.

  I have several hardrives with hundreds of directories and must share each individually. There must be a way around this?

  Why everyone does not assume that the implications of the root of a drive of sharing are unknown. I get it. I Armi it. But, Yes... I want to share the root of my records. It's like a big giant microsoft diaclaimer whenever I hear it.

  So I thought to it. Finally!

  OK, that's the problem with Windows 7: I had possession of the disk on the local computer (by default), but this is not enough. I had to give "everyone" the drive to another computer to access property. That means logging in inspired by the network from another machine to Win7 computer, you property as "everyone" and therefore, the authorization to access the drive.

  So, here is what I did. Right-click on the hard drive from windows Explorer. Go to properties. Click Security. Click on change. "Everyone" add to the Group and the permissions you want. Then, go to sharing and share the drive as you normally would. The root of the drive will be accessible on the network.

  I understand it now, but it is poorly explained in documents I've read. I spent hours of research on this and cannot understand why MS makes it so hard to share a drive on a network. Totally absurd.

  I hope this helps others trying to do the same thing. In a small home network, it is very common need to share multiple disks in the root of c:\.

• Is it possible NOT to include the name of the document as the root of a peoplesoft JSON document tag?

  I'm consuming a REST service (from documentum) in peopletools 8.53. I have set up my document, message, service and security and can connect to and receive a response from the REST service. I can't fill the response document, however, for two reasons - the peoplesoft document begins with the name of the document that the tag root has no the REST service. In addition, the service REMAINS returns tables brackets and the peoplesoft document seems to accept only braces. What I've read, hooks can be supported in peopletools 8.54 but we will not upgraded our tools of press at the moment.

  Is it possible not to provide or ignore the root of a document of peopelsoft tag? Also, is there a way to structure a document to tables? I can see the whole of the response from the REST service using the GetContentString method message - is the best option to analyze manually through the answer and do not use the document object at all?

  I have the same frustration. One solution is to use a separate library to parse the JSON (something like json.simple). Another solution, I think it's easier, is to use JavaScript, which is included in Java 7 with 8.53 PeopleTools. Here is an example of JavaScript:

  /* Sample JSON data
  [
      {"emplid": "KU0001", "oprid": "HCRUSA_KU0001"},
      {"emplid": "KU0002", "oprid": "HCRUSA_KU0002"},
      {"emplid": "KU0003", "oprid": "HCRUSA_KU0003"}
  ];*/
  
  var result = (function() {
      var CreateRecord = Packages.PeopleSoft.PeopleCode.Func.CreateRecord;
      var Name = Packages.PeopleSoft.PeopleCode.Name;
      var SQLExec = Packages.PeopleSoft.PeopleCode.Func.SQLExec;
  
      var rec = CreateRecord(new Name('RECORD', 'NAA_SCRIPT_TBL'));
  
      var count = 0;
      var json_string;
      var json;
  
      var guid = 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(/[xy]/g, function(c) {
          var r = Math.random()*16|0, v = c == 'x' ? r : (r&0x3|0x8);
          return v.toString(16);
      });
  
      rec.GetField(new Name('FIELD', 'PM_SCRIPT_NAME')).setValue('JSON_TEST_DATA');
      rec.SelectByKey();
      json_string = rec.GetField(new Name('FIELD', 'HTMLAREA')).getValue();
      json = JSON.parse(json_string);
  
      // TODO: iterate over json data and
      json.forEach(function(item, idx) {
          SQLExec("INSERT INTO PS_NAA_TEST_TBL VALUES(:1, :2, :3, SYSTIMESTAMP)", [guid, item.emplid, item.oprid]);
          count += 1;
      });
  
      return "Inserted " + count + " rows";
  
  }());
  

  Here is the JavaScript:

  1. Declares variables that point to PeopleCode functions
  2. Selects JSON data in a database table. You could alternatively fill a JavaScript variable before executing the JavaScript (code below)
  3. Analysis the JSON using JSON JavaScript Analyzer
  4. Traverses the JSON
  5. Using SQLExec in JavaScript to insert some values of the JSON data into PeopleSoft tables
  6. Returns a message describing what happened

  Here are the PeopleCode required to run this JavaScript:

  Local JavaObject & Manager = CreateJavaObject ("javax.script.ScriptEngineManager");

  Engine & local JavaObject = & manager .getEngineByName ("JavaScript");

  Local station &script;

  SQLExec ("SELECT HTMLAREA FROM PS_MY_SCRIPT_TBL WHERE MY_SCRIPT_ID =: 1", "THE_SCRIPT_ID", & script);

  & engine.eval(&script);

  Local chain & result_text = & engine .get ("result") m:System.NET.SocketAddress.ToString ();

• Can hyperic agents collect metrics from a server where the 'root' FS went to ' read-only '?

  Hello

  Can agent hyperic able to collect measures from a server where the 'root' FS went to ' read-only '?

  IE will be hyperic monitoring work if 'root' FS managed server went to fashion 'read only '?

  Thank you

  The agent record metric data in the local server in the data directory.

  These data will be sent to the Hyperic server.

  As a result, the agent must write permissions on local storage.

• Creative Cloud Desktop only works in the root account

  10.10.3 Mac

  Cannot open the VAC Office. nothing happened to the screen after clicking on the icon. only a CAC logo (in gray) appeared in the status bar at the top, but it disappeared quickly. Have you tried:

  1. creation of cloud cleanser

  2. safe Mode

  3. clean the OOBE, AAMUpdater records

  4. connect with the administered user another

  Installed and opened successfully to the root account, but don't always works is not in my account (which is an administrator).

  Please help me solve the problem. Thank you!

  I fixed this problem in my environment (Yosemite 10.10.3) after a day and a half, tinker with it.

  Open launchpad / look for the disk utility / click on verify disk permissions / repair disk permissions.

  It worked for me. Adobe CC now works again and the applications are broken no longer.

• parents and children of the same table records

  I want to create a query that is a union such that 2nd resultset is based on the game of results 1. I have a table that has parent and child records in the same table.
  
  Table: EVENTS
  EVENT_ID
  PARENT_EVENT_ID
  CREATED_DATE
  (other columns)
  
  If PARENT_EVENT_ID is null, then this is a parent record, otherwise it is a book of the child. I want to select all parent records then union them with all the related child records... something like this:
  
  Select * from EVENTS where CREATED_DATE < sysdate - 90 and PARENT_EVENT_ID is null - all parents
  Union
  Select * event where PARENT_EVENT_ID in (select EVENT_ID of EVENTS where CREATED_DATE < sysdate - 90 and PARENT_EVENT_ID is null)-include all children selected from the top parent
  
  It works but it of kind of ugly, I want to avoid using the subselect in the 2nd because it is a repeat of the 1st statement, is there a way to alias the first statement and only refer to him in the 2nd query?

  Hello

  CONNECTION is very similar to a UNION on the same table. How is this:

  SELECT     *
  FROM     events
  WHERE     created_date     < SYSDATE - 90
  START WITH     parent_event_id     IS NULL
  CONNECT BY     parent_event_id     = PRIOR event_id
       AND     LEVEL          <= 2    -- Maybe
  ;
  

  ?

  To answer your question: Yes, you can still keep the result set of a query and the Treaty as if it were a table or vew, like this:

  WITH     roots     AS
  (
       SELECT     *
       FROM     events
       WHERE     created_date     < SYSDATE - 90
       AND     parent_event_id     IS NULL
  )
  SELECT     *
  FROM     roots
       --
  UNION ALL
          --
  SELECT     *
  FROM     events
  WHERE     created_date     < SYSDATE - 90
  AND     parent_event_id     IN (
                        SELECT  event_id
                        FROM    roots
                    )
  ;
  

  It's always a bit ugly, however. I would use CONNECT BY or from Oracle 11.2, a recursive WITH clause (which is explicitly a UNION), or, in any version, a self-join, like this:

  SELECT     c.*
  FROM          events  c
  LEFT OUTER JOIN     events     p  ON   p.event_id  = c.parent_event_id
  WHERE   p.parent_event_id  IS NULL
  ;
  

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the results desired from these data.
  Report where the queriy above (the one you decide to use) is producingthe bad results and explain, using specific examples, how you get the right results from these data in these places.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).
  See the FAQ forum {message identifier: = 9360002}

• Helps the management of records in the "VM and Templates view" as well as the view of data warehouses

  All,

  I have 2 questions.

  (1) in the 'view of VM and models', we have organized our virtual center of demand for the two years.  However, there are still many persistent VM in the folder root from this point of view.  How can I export the virtual machine from this point of view only and exclude the virtual machine already in a subfolder.

  For example, I have VM in APP1 and APP2 APP3 records.  However, there are still hundreds of virtual machines to the root.  When I try to view the virtual machine in the root folder, I get a list of everything, including the virtual machine in APP1 and APP2 APP3 records.

  (2) according to the data center, I have hundreds of data stores.  How can I make a list of people (about 200) and move them to a folder in this point of view.

  For example, I have 100 stores of data that are specific to the exchange environment.  I would like to move all of those in an Exchange_LUN folder so that I can set different alarm setpoints.

  All your data warehouses and folders have names unqiue, try the following

  $currentDir = pwd
  cd vmstores:
  Import-Csv -Path "C:\MyFile.csv" | %{
      $tgtFolder = Get-Folder -Name $_.Folder
      $ds = Get-Datastore -Name $_.Datastore
      $dsMoRef = @($ds.extensiondata.MoRef)
      $tgtFolder.ExtensionData.MoveIntoFolder($dsMoRef)
  }
  cd $currentDir
  

• A loop in the Variable XML records!

  Hello

  I get no way how to do this. I get the XML below from a custom component of DSC. Now, I need to treat it.

  <root>
      <records total_records="4">
          <record>
              <jobno>1122</jobno>
              <cust_name>Abhinav</cust_name>
              <email>[email protected]</email>
              <stat>1</stat>
          </record>
          <record>
              <jobno>2233</jobno>
              <cust_name>Doctor Dhober</cust_name>
              <email>[email protected]</email>
              <stat>0</stat>
          </record>
          <record>
              <jobno>4666</jobno>
              <cust_name>Vinau Dubey</cust_name>
              <email>[email protected]</email>
              <stat>1</stat>
          </record>
          <record>
              <jobno>7677</jobno>
              <cust_name>Nelesh Poda</cust_name>
              <email>[email protected]</email>
              <stat>0</stat>
          </record>
      </records>
  </root>
  
  

  Now, I have to loop through each record & to do something for each of them. In my approach, I must send a mail to each user in the XML file. I tried using the Set selector to SET the node VALUE, but without success. Any help.

  Thank you.

  
  -

  Afonso

  Your xpath does not match your XML code - you're missing the root node in your xpath expression:

  Expression: /process_data/myXML/records/record[1]/email
  

  must be:

  / process_data/myXML/root/records/plug [1] / email

  When you build your loop there is another thing to be careful.  If you evaluate a variable xpath within another xpath expression, it gets inserted string.  This happens even if the variable is an integer.  For example: if I have a whole variable counter that is equal to 3 and evaluate:

  / process_data/myXML/root/Records/record [/process_data/@counter] / email the xpath expression will insert "3" (a string) and not an integer, as you can imagine.  The result will not be the third node. This can be a source of frustration, and it's difficult to debug.

  Instead, use the number inside the expression:

  / process_data/myXML/root/Records/record [number (/process_data/@counter)] / email

  I've attached an example of process that shows this.

• problem of interpolation with clip on the stage of the root

  The basic gist: I have a swf loaded into a movieclip on the stage. He plays well, I can refer to it without any problems. When I the holder clip on the stage of the root motion tween, however, it seems to unload the film loaded... I checked with a variable that I loaded in the film loaded; as soon as the thing is interpolated, this variable is zero. Don't want .swf to disappear.
  
  I can't find any unfortunate place with unloadMovie() action, there is nothing obvious that would be unloading the film... I am doing something stupid? I know something I should? I'm authoring in Flash 8, Flash 6 export, for the record.
  
  Thanks for any help.

  -Yes, he has the same instance at the end of the Tween (and all the other keyframes) name she has when charged.

  We mask applied to it also. Then, who turns out be the question I just thought of now. When I took that out it worked fine. It is a problem with the mask.

  Thanks for responding.

• Managed server starts once the root directory specified.

  Friends,
  
  I am facing a problem when you start the managed server. I've specified the directory root as/var/opt/bea / < DomainName > / < servername > tab to start server in the administration console. I kept running node Manager.
  
  My env details are as below:
  
  BEA HOME page: / opt/bea
  
  AREAS of DIRECTORY: / opt/bea/areas / < DomainName >
  
  
  
  Once I start the server managed from the administration console, the node Manager log becomes with the message as below:
  
  < 04/08/2010 01:00 > < WARNING > < error e/s while reading the directory in the domain: java.io.FileNotFoundException: domain directory "/ var/opt/bea/wl_da_ma_b/wl_ma_mab_0101 ' invalid (field not found salt file) >
  java.io.FileNotFoundException: domain directory "/ var/opt/bea/wl_da_ma_b/wl_ma_mab_0101 ' invalid (file not found salt field)
  at weblogic.nodemanager.server.DomainManager.initialize(DomainManager.java:81)
  to weblogic.nodemanager.server.DomainManager. < init > (DomainManager.java:53)
  at weblogic.nodemanager.server.NMServer.getDomainManager(NMServer.java:252)
  at weblogic.nodemanager.server.Handler.handleDomain(Handler.java:218)
  at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:109)
  at weblogic.nodemanager.server.Handler.run(Handler.java:66)
  at java.lang.Thread.run(Thread.java:619)
  
  
  Please help me on this issue. Am I'm missing anything here.
  
  
  
  Thanks in advance

  In fact up to 7,0 WLS wls always used to create the domain within the BEA dir install dir only.
  but we can specify the directory of area outside the facility of dir BEA WLS 8.1.
  It's the only relevance for the different directory for a domain you can specify the domain root dir anywhere on the file system.

  Now the root directory server the only relevance to the root directory of the server is different from the root dir field is when you have your domain distributed on different machines.
  For example: If you have a domain with a server and administrator on a Machine and a server run on the B Machine.
  Then you can't have root directory of the managed server, the directory of the domain as the root directory of the domain will reside on computer A and Managed Server Root Dir will reside on the Machine B.

  And if you start the managed using the node Manager server and that you have not specified that the directory root of the Managed Server through the java_option then by default the root directory of the managed server will be created with in the nodemanager/common/WLS_HOME directory on computer B.

  And if you managed servers in different domains on the same Machine B therefore all managed servers by default their directories root within the nodemanager dir which will make it difficult to recognize what managed server belongs to what field.

  Therefore, it is always recommended to have specific server root directories if the field is distributed on several machines.

  Hopefully this will clear your queries.
  Thank you
  Sandeep

• Can Notes show the number of records with each folder?

  Can Notes show the number of records with each folder?

  No it can't. It would be nice tho.

• Glitch/Question of the root user

  All other encountered an error of password for the root user that uses a user admin instead account?

  Recently, I had to reinstall 10.11 on an iMac and went to create a startup disk. When I run sudo it asked for the root password (which is enabled) and kept saying "sorry, try again." I was sure I knew the password, but didn't so I reset the password of the root user. After the Reset Terminal still does not accept. I decided to user, my admin password and it worked.

  This is how it is supposed to behave or am I missing something? (Err is human but to REALLY screw up, run sudo)

  My Root user and the admin have the same password.

• Display the Inbox when you click on the root of the mailbox?

  I want the contents of the Inbox to display in the pane on the right, whenever I click on the root of an account/mailbox. (without showing the email accounts, advanced - never splash screen.) Is there a way to configure Thunderbird to behave like that? I noticed that the mailbox should behave as I want by default.

  I suggest that you use the mailbox. Thunderbird will not replace the settings with the Inbox screen. He will be having a set display to date on this screen with much more detailed and useful information. But he will not be replaced.

  This module is the proposed amendment. https://addons.Mozilla.org/en-us/Thunderbird/addon/mail-summaries/?src=SS

• How to reset the root password

  I forgot the root password of my iMac that I dedicated to my children, for a long time, now, I came to use it and found it very slow and unresponsive, and I need to log in using the terminal and write unix commands to find out the real problem, but could not remember the password to root probably I created seven years ago.

  as I remember that I needed to have the CD and reboot the system with the recovery disk, but I couldn't get there, shut up always back to the default disk.

  Any help is appreciated?

  Thank you

  Hello. This information can help you http://www.macworld.co.uk/how-to/mac/what-do-if-you I-forgot-your-mac-passwor d-3594395 /