the installation after downloading

Similar Questions

• How do I start the installation after downloading

  Recently, I downloaded the following files in Production Premium CS5 (shown here in alphabetical order):

  • AdobeCS4InternationalEnglishSpeechAnalysisModels.exe
  • AfterEffects_10_Content_LS7.7z
  • AfterEffects_10_Content_LS7.exe
  • AfterEffects_PremierePro_CS4_ALL.7z
  • AfterEffects_PremierePro_CS4_ALL.exe
  • Illustrator_15_Content_LS1.exe
  • Install_Instruct_AE_PP_CS4.PDF
  • Install_Instructions.PDF
  • PremierePro_5_Content_LS7.7z
  • PremierePro_5_Content_LS7.exe
  • ProductionPremium_CS5_LS7.7z
  • ProductionPremium_CS5_LS7.exe
  • ProductionPremium_MasterCollection_CS5_Content_ALL.exe
  • SpeechAnalysisModelsInternationalEnglish_2_LS7.exe

  Said of the installation instruction to start the installation by double-clicking setup.exe, but there is no file.

  Questions

  1. What file should I double-click on the installation?
  2. What is the correct order to install the above files?
     

  Note

  I have Windows 7 32 bit and you need to install first as well!

  Hello-

  My apologies for confusing experience! To get started with your Production Premium, you must run:

  ProductionPremium_CS5_LS7.exe

  Please make sure the file is in the same directory as ProductionPremium_CS5_LS7.7z.

  This will extract your download and start the installation of the product Premium CS5.

  The other files are templates and additional content and can be installed one at a time. If you have the same names of files and .exe and .7z, simply run the .exe and the installation of this component (AfterEffects_10_Content, PremierePro_5_Content, etc. will start).

• Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3

  Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3. What I have to do.

  Assuming you meant WinXP SP3...

  Why the SP3 was not installed for over a year?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install WinXP SP3?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Bought Adobe DC after the trial, after download receive: you have Adobe Acrobat DC (continuous) is already installed.  Please uninstall this product before proceeding with this installation.  Perhaps because the trial was under different Adobe ID?

  Bought Adobe DC after the trial, after download receive: you have Adobe Acrobat DC (continuous) is already installed.  Please uninstall this product before proceeding with this installation.  Perhaps because the trial was under different Adobe ID?

  Sign out of your account 'other '... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account "nine"... Reinstall

• iPhone 6s more stuck in the mode of the brick after downloading ios10. Cannot restore via iTunes. error 3014

  iPhone 6s more stuck in the mode of the brick after downloading ios10. Cannot restore via iTunes. error 3014

  After the update to ios10, my 5s iPhone seems to work very well. I reconnected it to iTunes and then it bricked, and I panicked.

  iTunes synced a couple of times, it took about an hour and a half for me. After that it stopped its cycle of synchronization, I unplugged my iPhone - it still bricked. I then did a hard reset and it worked.

  Maybe I got lucky, maybe my iPhone and iTunes need a kick in their buttocks.

• I downloaded pictures from my unicameral. I decided to delete the photos after download, which means the camera, can't find photos on system

  I downloaded pictures from my unicameral. I agree delete the photos after download, which means of unicameral. I saw the slideshow of the pictures. Now, the folder is empty. Did the pictures are removed from the computer and the camera

  Always remove files with the characteristics of the cameras after you log out of your computer,

  Whereas when you confirm them files were imported successfully.

  This free tool needs to restore the files on the camera,

  http://www.Piriform.com/Recuva

• Where can I open the CS6 after download?

  Where can I open the CS6 after download?

  It doesn't have a button 'open '. Thank you ~.

  Folder C:\Program Files\Adobe\Adobe Premiere Pro CS6

  Of course, this is only if you have the required version of 64-bit Windows

• where can I find the installation after that I bought

  where can I find the installation after that I bought

  Hi James Bennington,

  There is no need to install anything.

  You can just connect to "https://cloud.acrobat.com/convertpdf" using your Adobe ID credentials and try to create PDF or combing different files into a single PDF file.

  Kind regards

  Ana Maria

• LV 2011: How to load drivers during the installation of downloads (not disks)?

  Hello-

  I tried to install LV 2011 and the RT and FPGA modules in the files to download on the Web site of NOR.  At the end of install it the two LV and real-time Module development system, I get the following message:

  

  I don't have a CD of drivers available.  I have the Drivers\Aug11\Products of device OR downloaded from OR or folders, but cannot get the prompt above to recognize anything in this hierarchy as a legitimate target.  What is the right way to proceed here?

  By context, I hope that that this issue will shed light on a problem I had simulating a cRIO chassis, as I've described here:

  http://forums.NI.com/T5/LabVIEW/no-option-to-simulate-cRIO-device-after-installing-LabVIEW-and/m-p/1...

  Thank you guys a lot.

  Simply choose "later." When you start the installation, just choose the option not to install device drivers (there is an option there).

  Then, download and install the drivers concerned. For modules FPGA and RT, which will be the OR-RIO driver you can download.

• 5510 printer/Mac 10.7 fail to complete the installation after said to unplug the USB.

  Have installed the relevant software & drivers such as advised by Apple/HP as disc not suitable for my Mac 10.7. After going through the installation process complete Mac fails to find the printer wirelessly after saying to unplug the USB cable. The printer indicates that there is a wireless connection to my router wireless of AOL, but still I get the message "select devices below" but having contracted the USB cable, there is no display device.

  ... Hello again.

  It seems now that HP Support have found the problem so let me give you some information.

  I called the Apple Technical Support on the advice of the staff of the local Apple store but it told me that it is acknowledged as a problem as Apple have already tried to solve the problem and failed he spent on HP.

  I spent 50 odd minutes on phone to the call center of Newcastle (which was fantastic) and now upward and the operation.

  We have downloaded 2 updates of for Mac and printer 5510 (firmware).  In the preferences system (Print & Scan) the file sharing box has been checked (and also ensured that the sharing printers, file sharing and the sharing of scan have been checked).  This has allowed to get up and running with print but then had a problem with scanning.  We then cut to reset (in that order)-router, Mac and printer, then turn it back on in reverse.  Then we have the source of installation of scan in the menu of applications under Hewlett Packard/HP Scan 3.

  I hope this helps.

  John

• BROWSER DOES NOT CONNECT TO THE INTERNET AFTER DOWNLOADING THE REALTEK HD AUDIO DRIVER

  PC: Hewlett-Packard Pavilion Slimline model: s3307C

  Operating system: 32-bit Vista Edition Home Premium

  I wanted to update my sound driver and downloaded the Realtek HD Audio 32 bits for Vista2013 that I saw that I already had the 2009 version.  the one I downloaded is the version of the file R-271 2.11.15.0

  Can no longer use my browsers, they keep loading and after a certain number minutes, (20) and then I get a message saying that Web pages are not displayed and the option to wait or kill the pages, it's on the Chrome browser.  Internet Explorer behaves in a similar way.  My computer says I am connected to the internet.

  I called my internet provider and they had me reset the modem to factory reset, no results.

  They asked me to ping google.com, computer failed.

  I tried two restores system without result, he will not restore

  I tried to uninstall this 'thing', and the computer re-installed.

  Running out of options here, can someone please help me? or if my computer is ruined?

  Thank God I have a second, a laptop computer to ask for help on.

  Welcome to the forum.

  I don't see why the browsers do not work due to a change to the Audio.  I can imagine that the Audio does not, but I do not see the link between an update to the Audio and network failure.

  I do not recognize the patch / update installed.

  • Do you have the new driver Audio HP's?  If Yes: so, what's the name of the sp package *?

  The following come to mind...

  ======================================================================================

  System restore

  • "Back in time" to a point where everything worked.

  Using Microsoft System Restore - Vista

  NOTE:

  • Restaurant sometimes works best if you first remove the system in Safe Mode.
  • If restore works, but the system will not back-track, there may be something weird going or system has not created a Point of restoration for the necessary period of time.

  ======================================================================================

  Recovery Manager - Vista

   

  • Restore and reinstall the original comes from driver tjhat on operating system

  HP and Compaq Desktop PCs - performing a software Application or recovery Driver (Windows Vista)

  ======================================================================================

  Install the driver from the website of your computer

   

  The Audio driver for your Vista system is presented as an 'Update' instead of a 'pilot', or 'original '.  You might be able to use it as a stand-alone facility - which means that the wording of the document is misleading - or the packaging may actually be dependent on the original driver that is not available on the website for Vista 32 bit OS.

  HP Pavilion Slimline s3307c Desktop PC drivers & downloads - Audio

  NOTES

  • To REMOVE the driver in Device Manager, you must uninstall, AND check the box to remove the driver. -Restart the system to complete the uninstallation.
  • This opens the system up to the old driver installation / original / correct, but this means that you must have something available to replace the removed driver.
  • If you use the Recovery Manager, you may not be everything first remove the existing driver - you can try just saying the system to restore the original and see if it works.  Restart the computer after installation.

  =====================================================================================

  The driver can be very well and it's the cache driver and instructions in memory which is trashed.  Power reset drain all the old instructions and forces the system to go on the drive to read the drivers and software on the computer.

  Resetting the forced feeding

  Execution of a coercive power reset or forced Reset

  Power reset cannot tell the difference between drivers - it does not analyze a driver before applying.  It assumes that all the drivers on your computer belong there.

  EXAMPLE:

  • If the driver on the disk is the wrong driver before rebooting, it's always the wrong driver after the reset.
  • If the INSTRUCTIONS of the driver are tangled, messed up, or there are missing pieces of these instructions, the reset can solve the problem.

   

  Why a power reset works to solve some problems:

  The power reset does not install anything on your computer, it does not remove the programs on your computer and Reset does not change the settings on your computer.  Your data and programs remain as they were before the reset has been applied.  Reset runs old program of the memory instructions and forces the computer go to disk operating system for new instructions.

  Why a power reset does not work:

  If the problem is more than a simple tangle, if 'good job' on the computer is not good enough - in other words, you need an update, a new driver, or there is a problem that can not be "unraveled", then reset won't work.

  If there is a hardware problem power reset will not work.

  ===============================================================================

• CS6 upgrade crashes when the installer unpacks download

  Recently bought cs6 upgrade of cs5 for windows 7 online and was sent the link to download, which in itself is confusing because there are links to files at least 5 and I don't know which one to use and for what.

  I have download (twice) the large with the extension z7 photoshop file and the much smaller photoshop.exe file. This happens to a fresh install on a new system. no other product Adobe have been installed

  next to the free version of the reader. I have 55 GB of free space on the ssd drive that houses all the operating system files. I also have a standard sata drive with 935 GB free. I have all permissions on both. I run the exe with

  "Run as administrator" checked. I tried living on both drives and tried to install the drive resident or the other disk all with the same results.

  The error message after about 5% of unpacking of the download and then a quick jump to 98% is displayed (such as a 1/10th of a second or less, just long enough to read) and then the message

  appears that States [this is a problem when extracting the files. Check the available space on your computer and write the destination folder]

  I am logged in as admin. and having all the privileges on both drives.

  I downloaded the file always thinking that somehow he has been altered somehow. more than a gigabyte I don't want to do any more I have on my connection is slow.

  I'm lost as to the next step.

  Have to do with it being an upgrade? I have installed first cs5? I suppose that if that was the case, the error message which would have suggested, and I guess

  that I have not encountered this problem until he went to the step to install not only the unpacking of the stage of the compressed file.

  I hope someone can help. I can answer any questions I can.

  Thanks again for any help in advance.

  Ron

  Thanks for the info Jeff, have not taken the time to post what worked again because I just got the installation through this morning.

  I was getting the correct version of windows, I bought from a vendor online who sent me the link that takes me to the Adobe Volume Licensing.

  There are no instructions was just a list of files. Anyway after reading the compression utility reported broken files I did some research and found on the Adobe site.

  the place where I could download software, since everything is now creative cloud. I found the link for photoshop cs6 and took a chance and downloaded.

  It matched what I had downloaded from the link sent by e-mail. same name and same size of the file so this time when I clicked on setup it open

  and unpacked all the files in a few minutes and I was off and running. So my assumption that the link points to a version that is corrupt seems to be true.

  I note now that I have some problems after installation, indicating that the 32-bit version and 64-bit Microsoft C++ 2010 redist. version has not installed correctly

  and some other questions like this. I got the program to register, but in all honesty, I'm not even sure if it still works because I have not yet tried to open it.

  I downloaded the latest version of Microsoft and he tells me that it can not install because there is a newer version already installed.

  Then the big hurdle disappeared, but the smaller still.

  Oh and just in case where it helps here is the link that brings me to the designated downloads. I'm sure that you get to it because I had to connect to my accoount, but it will give you and idea

  where to find the troubled file that should be checked.

  Adobe licenses worldwide - error!

  Thank you much for the help.

  Ron

• Unable to Scan to the computer after downloading macOS Sierra. Is this a software problem?

  How can I scan from HP Envy 4500 to computer after downloading macOS Sierra?

  Hello wdemetris,

  Thanks for asking for scanning helps here in the Apple Support communities. I understand how it is important to have access to your scanner and am happy to offer help for this.

  As a precaution, we always recommend that you have backups to make sure that all your data is safe. You can perform a backup using Time Machine and an external hard drive. Use this article to help make a backup of your Mac: use Time Machine to back up or restore your Mac.

  Then, in accordance with article help: printer and scanner for Sierra, El Capitan, Yosemite, and the Mavericks macOS software, the HP Envy 4500 e-all-in-one is supported for printing and scanning. The drivers must be installed, but if not, if it please go to the App Store and check the updates tab to see if there are updates for HP. If there is, please install.

  If you have only general questions about how to get your updated scanner in place or how to scan pictures, please check out these two articles: macOS Sierra: implement a scanner & macOS Sierra: scan images or documents. If everything is configured correctly and you still have problems scanning, please visit this help article: macOS Sierra: scanning troubleshooting.

  Thanks again and have a great rest of your day.

• I can't find it on the desktop after downloading firefox

  I downloaded firefox. Later when I tried to find Firefox I couldn't find the symbol on my desktop

  If you downloaded the installer of Firefox, you must run it on your computer to install Firefox on your computer before you can use it.

  If you have already run the Setup program, it could not have created a shortcut to Firefox on your desktop. Try Firefox by typing in the search box on the start menu screen / and see if something happens.

• can't burn the CD after downloading Windows 10

  After downloading 10 Windows on my HP computer, I can no longer burn my playlist iTunes on a CD.  How can I fix this problem?

  The upgrade of Windows 7 to 10 (which is what I assume you did) can be very tricky.  From what I hear, Microsoft did a pretty good job except perhaps to update the drivers.  (In fairness to Microsoft, there are a lot of flavors to them and they can be very tricky).  Try to go to Device Manager and see if you can update your drivers, especially the Apple Mobile Support & CD drivers (for your particular brand).  This can help:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support