the kerning setting

Similar Questions

• Cannot set the kerning value

  Hello guys,.

  I'm on a script that updates the value of the kerning between characters in a textframe.

  The following does not work (it gives me error - "the property is not applicable to the current state")

  newTextFrame.words [0] .insertionPoints [f] .kerningValue = 10;

  However, I don't get error when you use the property kerningValue of characters: -.

  newTextFrame.characters [f] .kerningValue = 10;

  On alert, it is even send me the '10', as defined in advance, but on my indesign document, kerning all values of the remains (0)

  Does anyone have an idea on how to fix this?

  Thanking you in advance

  What happens if you do this:

  newTextFrame.words.everyItem (). insertionPoints.everyItem () .kerningValue = 10;

  What version of InDesign are you using?

• I changed the value of the increment in the kerning by default preferences, but it had no effect

  InDesign CS5 using on an iMac. The default increment when you use the arrows the kerning and tracking on the control is +/-20 bar. I just found out that you can change it in preferences (units and increments - keyboard increments - kerning/tracking) so I set it to +/-5, but it has no effect. I left the program and he revived, but it still does not work. Anyone have any ideas? Thank you.

  This feedback only affects the value when you use the keyboard shortcuts, not push buttons.

• My iPhone6 has convinced himself that he has a helmet connected - how can I convince otherwise and return to the normal setting?

  My iPhone6 has convinced himself that he has a helmet connected - how can I convince otherwise and return to the normal setting?  I tried turning it off and back on after awhile, but did not.

  Double check with a magnifying glass and a good lighting that nothing has been slain. Then, try insertion and withdrawal of your headphones a couple of times. If this does not work, it may be while the shooting went wrong. In this case, make an appointment at the Genius Bar at your local Apple store for the assessment.

• Reverse the factory setting

  I have a phone that was given to me from my father-in-law, it's a phone of one of his former employees that was great in the office. We had no password information, so we tried to reset the phone to wipe and start over. This just finished sending us to a factory setting that requires an Apple ID and password that we don't have. How do I reverse the factory setting, so I'm back to the regular functions of the phone?

  Sorry, but you can't. This device is locked to the previous owners iCloud account and password activation.  Without their password or their active assistance to disable locking activation, will you not be able to use this device.

  See disable find my iPhone Activation Lock - Apple Support

• I can't restore the default set of buttons on the message pane when I try to customize.

  I use Thunderbird 24.4.0 Lion mountain on a MacBook. I have three e-mail accounts - about to drop one having switched provider. Each account has different message pane buttons, not by intention, none has the complete set and could not restore all by doing a right-click to customize and selecting 'restore the game by default'.
  Thank you. Tanya

  Has followed this idea me and disabled the Gmail add-on buttons and have now all the buttons back. Thank you for pointing me in the right direction.

• What is the default setting for the homepage of the new tab in firefox?

  My browser has been hijacked, I need to reset and I don't know which is the default setting. I would use the new firefox tab layout.

  See:

  • https://support.Mozilla.org/KB/new-tab-page-show-hide-and-customize-top-sites

  The URL of the new tab page is on: newtab

  The build-in home page URL is on: home.

  If there is a problem with the build-in on: home page and then try to reset the search engine used on the subject: homepage.

  Reset the pref browser.startup.homepage_override.mstone through the context menu by default on the topic: config page and close and restart Firefox to restore the on: default home page.

  • http://KB.mozillazine.org/about:config
  1. Open the topic: config page through the address bar
  2. Type in the filter bar: mstone
  3. Right-click on the browser.startup.homepage_override.mstone line, and then select: Reset
  4. Close and restart Firefox

  If this did not help, then remove the button Delete the chromeappsstore.sqlite file in the Firefox profile folder and repeat the foregoing.

• Frustrated by the strange behavior of the command SET up FIRST HP!

  I tried to define a function using the command SET the. The function is F = G * M * m / r ^ 2. No matter what I try, I still get the same generic error: INVALID INPUT. I went to the guess, user manual, half a page of information about the command SET. Better nothing, but far from what you would expect if the manual is YOUR main source of information on how to use the calculator. In the first instance, an error, here's what I discovered:
  
  (1) name of the function cannot be long 1 letter. They can combine the capital letters, small letters and numbers...
  (2) variable must be UPPERCASE
  (3) variables can start with a letter and followed by a unique number. ONLY THAT, nothing more
  
  Can someone, confirm please?
  
  It is quite limited. So now, instead of the calculator not work for me I have to work for it. This is the formula I: F = G * M * m / r ^ 2 and that's what the calculator would accept in the screen SET: F12 = G * M1 * M2/R ^ 2, see figure 1. Quite annoying, but I can leave with it.
  
  As you know, G is the gravitational constant: 6.67384 x 10 ^-11.  The calculator is supposed to to remember, so why type it again?  I went to CASE view, called my function, putting fake numbers, just to try it, had G of MAJ > units > Const > physics.  This is how my edit line looks like: F12(6.67384E-11,100,300,25)... See figure 2. Guess what? An ERROR GENERIC, no idea of what the calculator don't like on this subject. After a while, I discovered he does not like the E in 6.67384E - 11, she she likes 6.67384e - 11, and then it throws another error (Bad arguments number) see figure 3. I check everything, it looks all right.
  
  I decided to try my LUCK in the main screen. Everything works perfectly. He doesn't get complaint even the 'E' in G, and I get the result expected (figure 4).

  I went back to the screen set and passed under the name of the F12 function to Forc, put the numbers again, MAGIC, now this market (see figure 5).  So, after all, it seems to be the calculator do not like the numbers the function name, but he didn't complain. Come on guys, you do not buy a top of the calculator online to go through this torment.
  
  Can someone tell me what is the reason for the bizarre behavior?

  Hello

  DEFINE functions MUST respect the rules of the home screen in every way shape and form. For example, the variables must be valid system variables...

  DEFINE function names cannot collide with existing variables/functions names, which is why you cannot use single past uppercase to name...

  If you want to use the names of other variables that the pre sets, you will first need to create them. Betai you can create them in CASES, it is best to create in the House because, as a general rule, it is best NOT to mix things ca and home (it is much slower and is more likely to cause disorders). To create a new variable home user, just assign a value to a variable as in abc: = 5 (or 5-> abc-> where is the arrow of the sto)... You will be asked if you want to create the variable. answer Yes and you're...

  Cyrille

• After that you increase the size of the page with Ctrl plus, is there a way to keep the new setting?

  My new laptop has great features but a much smaller screen. Change the screen resolution in Windows makes it all look terrible. Using ctrl / + in Firefox to increase the page size solves the problem, but only until you go to a new page. Is there a way to keep the new setting until what reverse you it with ctrl/less?

  There are some add-ons that can be used to change the zoom level on all sites, for example:

  • NoSquint - https://addons.mozilla.org/firefox/addon/nosquint
  • Default FullZoom Level - https://addons.mozilla.org/firefox/addon/default-fullzoom-level

• What is the best setting for streaming audio DAC output?

  Entire CD to 44.1 k production, other audio files can be defined above, according to the recording.  What streaming audio, for example KCSM jazz, or any other music station?  What is the best setting of the output of this situation?

  Check the flow rate of flow for the station (you can often check online). It is not anywhere near CD or higher.

• in the menu toolbar customization, ALL the small icons in the last set (home, reload the page, stop downloadig page, etc.) are dishes on MISSING. What can I do?

  in the menu toolbar customization, ALL the small icons in the last set (home, reload the page, page download stop, etc.) are dishes on MISSING, and therefore I can not add the Firefox.What can I do?

  These buttons are not in the drop-down to 'Add' Palette, they are on the Navigation toolbar and must be "moved".
  The buttons Stop and reload should appear between the address bar and the search bar when customize is open, and the home button should appear to the right of the search bar.

• Every time I load improved Firfox 3.6.6 I get an error message saying that the new version does not have the proxy setting.

  Whenever I load the latest version of Firefox 3.6.6 he says that he does not accept the proxy setting. Given that I've never had a problem like that, I don't know how to correct it.

  This has happened

  Each time Firefox opened

  I upgraded to 3.6.6 today. After installation, I am unable to open a Web page with the exception of the locally saved files. How can I solve this problem?

• I have Sony Dsc - hx1 and not good mountain photos so I want the best setting for photography

  I have Sony Dsc - hx1 and photos in wrong mountain in which side of the photo is great and the other does not appear with better view

  so I want the best setting for photography

  http://www.Sony-MEA.com/support/product/DSC-HX1

• Apple "final cut pro 7", high res Pro 422lt 1920 x 1080 (odd) clips, is this gradual?, no 1080 progressive setting sequence, how can I ensure that I have the best setting of the timeline for my clips

  Apple "final cut pro 7", high res Pro 422lt 1920 x 1080 (odd) clips, is this gradual?, no sequence definition 1080 progressive

  How can I make sure that I have the best setting of the timeline for my clips. I did all the settings of Mount clips but there is no progressive setting for 1080 p. Images originally dslr Nikon that I used mpeg streamclip to convert to prores. Thanks for your help!

  The frame for you size source of material is HDTV 1080i (16:9). That only sets the size of the image, not the domination of the field, it's what makes progressive or interlaced. The reason it's labels with the 'i' is that when FCP7 was abandoned by Apple, they have never updated the software in order to take account of 1080 p contents.

  To make your progressive sequence, set the dominant field to None.

  gerforce wrote:

  Images originally dslr Nikon that I used mpeg streamclip to convert to prores.

  In your screenshot of the properties of the element for your clip to the source, the material is interlaced. At the original camera file interlaced or progressive?

  Also, the fps footage was actually 30 original and 29.97 not standard?  30 images/s is very limited its use.

  MtD

• Yosemite clean install hangs on the screen 'set up '.

  I recently had some problems with my iMac intel in 2009. I had to change the HD as it was damaged and the battery and the power source. I Yosemite on a USB bootable and have gone through all the pages together (picking countries, logging into my account, accepting the TOS, etc.) and am now stuck on the screen "Setting up your Mac. It has been 9 hours now with spinning lines. I thought I was a USB2 connection and a new 2 TB drive (for some reason, it appears in the as 3 TB disc utilities) is to take the time. But I'm curious as this time seems excessive. Seems locked up to me but a friend who was in IT, and runs on Linux based machines say configuration it faces at work (huge machines - 20-40TBs) takes a long time because it must map the available space (which I probably described it wrong, but that's the idea).

  Does not seem normal to me but if it is I'll let it run until it's done. Or am I missing something here?

  Thanks in advance for any ideas and help you can offer.

  OK, something must be wrong. It runs 14 hours now.