the keyboard keyboard microsoft natural ergonomic 4000 answers sometimes

Hi I have a problem with my keyboard, microsoft natural ergonomic 4000 USB, the beginning of the problem when I install windows 8, so I couldn't take Windows 8, so I decide to remove the copy and re - install my original copy of windows 7 ultimate 32 Bit. The problem is with the letter m n, these 3 letters sometimes that they work perfectly and sometimes they stop for a few minutes. I format the computer, delete the partition and installing new windows, but the problem still exist, I updated my drivers and installed the last itype, but the problem remains the same, I disassembled the keyboard and clean it up, I check the key looks all perfect, but still facing the same problem, now its works perfectly, but after he can stop. For sure the best way is to throw it away and buy a new one, but what a cost of $ 150 and I'm not going to throw anywhere. Please I need a solution thanks.

Formatting
updated drivers
software update
I've tried different usb
I tried the former Council of keyboard using a mixer or something like that
I have to disassemble the keyboard and clean it very good
Always the same.

Hello

I suggest you refer to these links to contact Microsoft Hardware support team for assistance with the question.

Natural Ergonomic Keyboard 4000

http://www.Microsoft.com/hardware/en-us/d/natural-ergonomic-keyboard-4000

How to contact Microsoft if you have questions about your hardware device.

http://www.Microsoft.com/hardware/en-us/support/contact-us

Hope the information is useful.

Tags: Windows

Similar Questions

  • Microsoft Natural ergonomic 4000 keyboard don't work via KVM / port replicator

    I currently have a keyboard, mouse, two monitors and speakers attached to a KVM / port replicator that allows me to easily switch between a desktop and laptop.  I recently bought a Microsoft Natural ergonomic 4000 keyboard.  When it is plugged directly into the office, the keyboard works fine, but when connected by the KVM / Replicator port, it is not recognized and does not work.  I did bother to try it with the laptop but, given that I don't keep it if it won't work with my desktop configuration.

    All the drivers for the keyboard are loaded on the PC (Win7).

    What gives?  Any ideas?  I don't want to trash, but will be in the blink of an eye (more will probably say something not nice about material that is not work and play well with-the others on a review).

    Thanks in advance for your suggestions.

    Hello

    Please keep us informed of the issue and I appreciate your efforts to resolve the issue.

    I suggest you to update the latest drivers for the KVM.

    Click on the links below and download the latest drivers.

    http://www.IOGEAR.com/product/GCS932U/

    http://www.IOGEAR.com/support/DM/driver/GCS932UB

    Steps to download drivers.

    1. Select the model number (GCS932UB) of the KVW
    2. Select the driver for the GCS932UB
    3. click on download

    Try to download the latest drivers and check if that helps. Let us know the results, we will be happy to help you further.

    Thank you

  • Mistypes keyboard: Microsoft Natural Ergonomic Desktop 7000

    Microsoft Natural Ergonomic Desktop 7000 bought on Amazon.com, made on 11 April.
    Hello
    I use Windows 7 Enterprise Edition on a Dell laptop. I recently bought a "Microsoft Natural Ergonomic Desktop 7000" from a dealer online. When I used it first, it worked perfectly.
    I had some problems with the software on my computer that I did research and corrected. After that the keyboard worked perfectly, but to halfway through the next morning it started to be very weird. For example, the key 'a' type 'gy '. This leads me to believe that the key mapping does not work somehow. The keyboard of the laptop works fine, and a USB keyboard that I have works correctly with this laptop. In addition, the mouse that came with the wireless keyboard continues to operate correctly. I tried on another computer. After downloading the software, I had the same result as on my computer.
    In Microsoft Keyboard diagnostics, when I quand je tape type 'a' it slap 'gy' and said:
    Legend: G (do) - 0 x 22
    Key: (Do) - 0 x 15
    Legend: G (break) - 0 x 22
    Key: Y (break) - 0 x 15
    Unknown key - HID Input
    Unknown key - HID Input
    STOP SCROLL: OFF
    CAP LOCK: OFF
    NUMLOCK: WE
    F LOCK: UNKNOWN
    This makes me wonder if the language of the keyboard has been changed somehow a language which has the double-byte characters.
    I have uninstalled/reinstalled drivers keyboard, cleaned the registry, compared the keys to register Keyboard Layout against another computer, removed the device in the Device Manager etc etc, without success.
    Can you help me?
    Cindy

    Hi Cindy,.

    Because the keyboard does not work with any computer, it seems that this is a unwanted material. I suggest you to contact the assistance material support team. They should be able to help you.

    See the link.

    http://www.Microsoft.com/hardware/en-us/support/contact-us

  • keyboard freezes natural ergonomic 4000

    Regularly my whole keyboard will not work. When this happens, unplug and re - plug will not solve issue.  After that I restart my computer, the keyboard works again.

    Hello

     
    I suggest you perform the steps:
     
    Method 1:
    Step 1: safe mode

    Start your computer in safe mode and check the number.

    To start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

     

     
    Step 2: clean boot

    If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

     
    Method 2:
     
     
    You can uninstall the drivers from Device Manager and reinstall the same thing again.

    1. click on Start, type Device Manager in the start search box and press enter.

    2 look for the device for which you need to uninstall the driver.
    3 right-click and select Uninstall and follow the on-screen instructions.
    4. restart the computer, if prompted.

    Install the latest driver again and check if that makes things better.

    See the links below for more details on the update of drivers:
     
     
    Let us know the results.
     
     
  • Questions of Microsoft Natural ergonomic 4000

    When I use excel 2007 and try to edit a cell with works by F2 function does ' t, I'm trying to configure, change or disable the default function on the keyboard but I can't use this feature correctly in excel. all suggest? I have change the keyboard of my old keyboard comercial and I Don t I have this problem.  I bought the keyboard natural Microsoft 4000 ergonomic for comfort, but I need to use the excel program.
    Concerning
    jaumesanz

    Have you tried lock key for the purpose of the function keys?

  • keys not working on Microsoft Natural ergonomic keyboard 4000 v1.0

    Suddenly, sixteen key doesn't work on my keyboard (Microsoft Natural ergonomic keyboard 4000 v1.0). No mechanical rigidity without bumps or moisture & maintain clean and dusted. It happened during a long session of Mozilla Firefox, type in the search bar. Same thing happened a few days ago still type in the search bar, but he corrected himself. Tried disconnect & reconnect the keyboard (USB), restart the computer, etc.. Using Windows 7 64 bit OS. To the help of OSK to write. Non-functioning of the buttons are "1 2 3 4 5 6 - = Backspace j k l; / Anyone got any ideas, or it's time to get rid of my favorite ergonomic keyboard?

    Using the keyboard to the screen until what the colon and semicolon keys can be restored. Following this stream.

  • Keyboard Microsoft Natural 4000: it's been abandoned?

    I want to know if Microsoft Natural 4000 Keybaord will be interrupted? I can't find it in stores. I had to look in many places to buy it. Looks like a shortage on the market. Are there any new product range to replace NK4000?

    Microsoft: http://www.microsoft.com/hardware/en-us/p/natural-ergonomic-keyboard-4000

    Amazon: http://www.amazon.com/Microsoft-Natural-Ergonomic-Keyboard-4000/dp/B000A6PPOK

    NewEgg: http://www.newegg.com/Product/Product.aspx?Item=N82E16823109148

    Amazon UK: http://www.amazon.co.uk/Microsoft-Natural-Ergonomic-Keyboard-4000/dp/B000B9RYG8

    J W Stuart: http://www.pagestart.com

  • I can't find instructions on setting up or using the keyboard Microsoft Wireless Comfort 1. 0a.

    I can't find instructions on setting up or using the keyboard Microsoft Wireless Comfort 1. 0a.  I GOOGLED it but the only reference I find tells me to go to the download page on the Microsoft Web site for this product.  I went to this site and the only thing it is limited warranty info and Product Guide.  I downloaded the Product Guide, but it only covers the basic information like it do not immerse in water, do not take part and the various regulations of the FCC about the product.  There is no info in this guide on how to configure or use the keyboard AT ALL.  Guidance on how to use this product is probably somewhere?

    The dongle is not plug it into the keyboard, it plugs into the USB port on the computer.  Wireless keyboards is not related to them - think of that.  :-)

    If you are missing parts to the keyboard, I would just buy a new one.  You can buy wired keyboards for as little as $4 these days, wireless are a little more expensive of course.  Personally, I find the wireless keyboards to be a pain because the batteries always come out in one in-opportune times.  YMMV

    Good luck.

  • receiver broken on Microsoft Natural Ergonomic Desktop 7000 - Wireless 2.4 Ghz Laser mouse

    I have a Microsoft Natural Ergonomic Desktop 7000 - 2.4 Ghz Wireless Laser mouse but I broke the USB receiver.  It was broken in two and certainly does not work yet.  Is there a way to replace the receiver without having to buy a new set?

    Hello

    See the following article for information.

    How to replace Microsoft software or hardware, order service packs and replace product manuals: http://support.microsoft.com/kb/326246

    Concerning

  • Function keys not working not not in Microsoft "Natural Ergonomic Keyboard 4000. -SOLVED

    RESOLVED: the choice KVM does NOT relay commands. [Yes, I spoke with the KVM hardware manufacturing] - if someone does know of a KVM FACT support Pass-thru orders?

    Original title: F keys intellitype keyboard does not not on XP.

    We have several Microsoft installed "Natural Ergonomic Keyboard 4000" and discovered one day we are experiencing problems with the function keys.  In our software provider, we are supposed to use SHIFT + F11 to access a specific function.  However this keyboard shortcut does not work.

    I installed the latest drivers of "http://www.microsoft.com/hardware/en-us/d/natural-ergonomic-keyboard-4000" for Windows XP (32-bit) and Windows 7 (64-bit) and installed on the right machines.  Yet this problem persists and I can't find a way to deliver a new command outside provider software to test if it of a hardware problem of keyboard or not.

    Any suggestions?

    BTW, the seller says "contact Microsoft", SOP answer because "it is not our fault for your choice in hardware.

    The application is developed for Windows XP and later versions, each system is at least a dual core Athlon + 4gigs of memory, with the latest OS updates.

    Thank you
    Will be

    Did you do the "F-Lock" is on? -Side of the Print button.

  • Natural ergonomic 4000 keyboard worn

    I have 2 of them, both purchased at Staples last year.  No, I don't have the Bill.  We're still new in the box.  My wife used his for several months.  The keys are dispelled.  I read here and all over the internet, it's very common.  Apparently, Microsoft's answer to this is to 'buy stickers to put on the buttons '.   This is a totally unacceptable solution.  I am currently using a Microsoft Natural MultiMedia Keyboard, which is light gray or white with black letters on the keys.  I used it everyday for years, and there is no wear at all on the keys.  New keyboards are black with white lettering.  They are the model number 1048, manufactured in China.  Serial numbers:
    7687603673143 and
    7687603378803
    Because it is clearly a quality production editing, specifically the choice of the ink used, Microsoft going to do to fix this?  Although one of them is still new in the box, my wife wants connect me it for her because she is worn out.  Clearly he too will have been key in a few months, and then I'll have two keyboards bad, news and a former, which seems fine.  Also, I bought the original Microsoft Natural Keyboard when they came first for years.  It's on a shelf in the basement.  No wear on its buttons or the other.  I replaced it only because the most recent have a smaller footprint, and the plastic had yellowed.
    Thank you.

    Hello

    I would say contact Microsoft hardware support team. Consult the following link:

    http://www.Microsoft.com/hardware/en-in/support/contact-us

    For more information:

    http://www.Microsoft.com/hardware/en-in/reseller

    It will be useful.

  • Microsoft Natural Ergonomic Keyboard wireless 7000

    I just bought and installed this keyboard, which seems to have a major shortcoming on the keyboards of MS proevious - there is no indicator light indicating when num, caps lock, shift, and lock are on - is there a way around this?

    Thank you very much.

    Hi Walter,

    See the link that help you solve the problem below: Troubleshoot the State of Numlock, SCROLLLOCK, lock and CAPS LOCK keys: http://support.microsoft.com/kb/894037

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I'm about to buy the Microsoft Natural Ergonomic Desktop 7000. There are two model numbers?

    Hello.

    Ive used the natural Ergo 4000 for a while now.  But now that I have a new office, I would like to get the wireless model.  I looked around and I see a WTA-00001 and version 4TQ-00001.
    Anyone know the difference between the two?
    Thank you very much in advance.
    Khameleon808

    Hello

    Some web, research suggests that the 4TQ-00001 is black and the WTA-00001 is grey/silver in color, but you must check these results yourself.

    http://www.bing.com/search?q=WTA-00001

    http://www.bing.com/search?q=4TQ-00001

    Don

  • How to start my pc remotely with the keyboard microsoft wireless 7000

    I have a motherboard ga-ma785gmt-ud2h. When I try to set up in the bios, it does not work. what Miss me... thanxz...

    Hello

    Unfortunately there is no option of turning the computer off by using the keyboard

  • Microsoft Natural Ergonomic - keys does not not in MS Applications

    I Erg Keyboard 4000, v1.0. During the upgrade to Windows 8:

    1 tab no longer works in any application. (It is the tab key itself, not Alt + Tab, WinSplat + Tab, etc. There is no error; It's just nothing.
    2. Similarly, the tab in a table used to advance to the next cell, or if, in the last cell, add a new line. Now, it does nothing.

    3. the Caps Lock key does not work in any application.

    4 alt - Tab, Ctrl + Tab, Shift + Tab to not work in any context in any product Office, at least as much Office365 is concerned.

    It's extremely frustrating. I uninstalled and reinstalled; restarted; cold start; pilots; files system activated with SFC, without result; any other suggestions?

    Hey Loren,

    -Have you verified the functionality of the keyboard on different computers with Windows 8?

    I suggest you install the latest version of the software for the mouse and check if it helps.

    http://www.Microsoft.com/hardware/en-in/p/natural-ergonomic-keyboard-4000#support

    You can also check with the hardware support and check.

    How to contact Microsoft if you have questions about your hardware device.

    http://www.Microsoft.com/hardware/en-us/support/contact-us

    Let us know the results. We will be happy to help you further.

Maybe you are looking for

  • My Mac is hacked! Encryption help please!

    My Mac Pro is hacked, and this is confirmed by the engineers. Because the Mail app and even online ISP mail did not work if good PSI hunted hackers. I found files fragmented on 240 and 480 GB Intel SSD drives into the slots of the T2 drive: files nam

  • Satellite L30-134 does support dual channel DDR2 memory

    Does anyone know Satellite L30 does support two mode because I've got 2x256MB and a 512 MB all Micron MT modules? Wojtek cordially

  • at the start of XP Professional I get error messages 2 application error

    1.) 008371-(tilde) 1.exe application error instr at "0x0042a8ea referenced memory at"0x00000008"memory could not be read. 2.) error Application MCP.exe to: Ref 0x7c90100b to '0 x 00000018' mem the memory could not be read This happens right after boo

  • HP officejet 7610 will not print paper 13 x 19

    When I put in place to print edge to edge, it prints only 8.5 x 11 paper of th.  This printer has been replaced recently and the other print 13 x 19 documents without any problems.  There must be a simple solution.

  • Numbering of 7960 - speed dial works, manual numbering fails

    Hi, I have a problem with a component a number of 7960 phones. When I compose a configuration with the number 9121000 speed dial I touched the correct routing model and the 9 is stripped and an external call is placed at 121000 via my gateway. If I d