Questions of Microsoft Natural ergonomic 4000

Similar Questions

• the keyboard keyboard microsoft natural ergonomic 4000 answers sometimes

  Hi I have a problem with my keyboard, microsoft natural ergonomic 4000 USB, the beginning of the problem when I install windows 8, so I couldn't take Windows 8, so I decide to remove the copy and re - install my original copy of windows 7 ultimate 32 Bit. The problem is with the letter m n, these 3 letters sometimes that they work perfectly and sometimes they stop for a few minutes. I format the computer, delete the partition and installing new windows, but the problem still exist, I updated my drivers and installed the last itype, but the problem remains the same, I disassembled the keyboard and clean it up, I check the key looks all perfect, but still facing the same problem, now its works perfectly, but after he can stop. For sure the best way is to throw it away and buy a new one, but what a cost of $ 150 and I'm not going to throw anywhere. Please I need a solution thanks.

  Formatting
  updated drivers
  software update
  I've tried different usb
  I tried the former Council of keyboard using a mixer or something like that
  I have to disassemble the keyboard and clean it very good
  Always the same.

  Hello

  I suggest you refer to these links to contact Microsoft Hardware support team for assistance with the question.

  Natural Ergonomic Keyboard 4000

  http://www.Microsoft.com/hardware/en-us/d/natural-ergonomic-keyboard-4000

  How to contact Microsoft if you have questions about your hardware device.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Hope the information is useful.

• Microsoft Natural ergonomic 4000 keyboard don't work via KVM / port replicator

  I currently have a keyboard, mouse, two monitors and speakers attached to a KVM / port replicator that allows me to easily switch between a desktop and laptop.  I recently bought a Microsoft Natural ergonomic 4000 keyboard.  When it is plugged directly into the office, the keyboard works fine, but when connected by the KVM / Replicator port, it is not recognized and does not work.  I did bother to try it with the laptop but, given that I don't keep it if it won't work with my desktop configuration.

  All the drivers for the keyboard are loaded on the PC (Win7).

  What gives?  Any ideas?  I don't want to trash, but will be in the blink of an eye (more will probably say something not nice about material that is not work and play well with-the others on a review).

  Thanks in advance for your suggestions.

  Hello

  Please keep us informed of the issue and I appreciate your efforts to resolve the issue.

  I suggest you to update the latest drivers for the KVM.

  Click on the links below and download the latest drivers.

  http://www.IOGEAR.com/product/GCS932U/

  http://www.IOGEAR.com/support/DM/driver/GCS932UB

  Steps to download drivers.

  1. Select the model number (GCS932UB) of the KVW
  2. Select the driver for the GCS932UB
  3. click on download

  Try to download the latest drivers and check if that helps. Let us know the results, we will be happy to help you further.

  Thank you

• keys not working on Microsoft Natural ergonomic keyboard 4000 v1.0

  Suddenly, sixteen key doesn't work on my keyboard (Microsoft Natural ergonomic keyboard 4000 v1.0). No mechanical rigidity without bumps or moisture & maintain clean and dusted. It happened during a long session of Mozilla Firefox, type in the search bar. Same thing happened a few days ago still type in the search bar, but he corrected himself. Tried disconnect & reconnect the keyboard (USB), restart the computer, etc.. Using Windows 7 64 bit OS. To the help of OSK to write. Non-functioning of the buttons are "1 2 3 4 5 6 - = Backspace j k l; / Anyone got any ideas, or it's time to get rid of my favorite ergonomic keyboard?

  Using the keyboard to the screen until what the colon and semicolon keys can be restored. Following this stream.

• receiver broken on Microsoft Natural Ergonomic Desktop 7000 - Wireless 2.4 Ghz Laser mouse

  I have a Microsoft Natural Ergonomic Desktop 7000 - 2.4 Ghz Wireless Laser mouse but I broke the USB receiver.  It was broken in two and certainly does not work yet.  Is there a way to replace the receiver without having to buy a new set?

  Hello

  See the following article for information.

  How to replace Microsoft software or hardware, order service packs and replace product manuals: http://support.microsoft.com/kb/326246

  Concerning

• Mistypes keyboard: Microsoft Natural Ergonomic Desktop 7000

  Microsoft Natural Ergonomic Desktop 7000 bought on Amazon.com, made on 11 April.
  Hello
  I use Windows 7 Enterprise Edition on a Dell laptop. I recently bought a "Microsoft Natural Ergonomic Desktop 7000" from a dealer online. When I used it first, it worked perfectly.
  I had some problems with the software on my computer that I did research and corrected. After that the keyboard worked perfectly, but to halfway through the next morning it started to be very weird. For example, the key 'a' type 'gy '. This leads me to believe that the key mapping does not work somehow. The keyboard of the laptop works fine, and a USB keyboard that I have works correctly with this laptop. In addition, the mouse that came with the wireless keyboard continues to operate correctly. I tried on another computer. After downloading the software, I had the same result as on my computer.
  In Microsoft Keyboard diagnostics, when I quand je tape type 'a' it slap 'gy' and said:
  Legend: G (do) - 0 x 22
  Key: (Do) - 0 x 15
  Legend: G (break) - 0 x 22
  Key: Y (break) - 0 x 15
  Unknown key - HID Input
  Unknown key - HID Input
  STOP SCROLL: OFF
  CAP LOCK: OFF
  NUMLOCK: WE
  F LOCK: UNKNOWN
  This makes me wonder if the language of the keyboard has been changed somehow a language which has the double-byte characters.
  I have uninstalled/reinstalled drivers keyboard, cleaned the registry, compared the keys to register Keyboard Layout against another computer, removed the device in the Device Manager etc etc, without success.
  Can you help me?
  Cindy

  Hi Cindy,.

  Because the keyboard does not work with any computer, it seems that this is a unwanted material. I suggest you to contact the assistance material support team. They should be able to help you.

  See the link.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

• Function keys not working not not in Microsoft "Natural Ergonomic Keyboard 4000. -SOLVED

  RESOLVED: the choice KVM does NOT relay commands. [Yes, I spoke with the KVM hardware manufacturing] - if someone does know of a KVM FACT support Pass-thru orders?

  Original title: F keys intellitype keyboard does not not on XP.

  We have several Microsoft installed "Natural Ergonomic Keyboard 4000" and discovered one day we are experiencing problems with the function keys.  In our software provider, we are supposed to use SHIFT + F11 to access a specific function.  However this keyboard shortcut does not work.

  I installed the latest drivers of "http://www.microsoft.com/hardware/en-us/d/natural-ergonomic-keyboard-4000" for Windows XP (32-bit) and Windows 7 (64-bit) and installed on the right machines.  Yet this problem persists and I can't find a way to deliver a new command outside provider software to test if it of a hardware problem of keyboard or not.

  Any suggestions?

  BTW, the seller says "contact Microsoft", SOP answer because "it is not our fault for your choice in hardware.

  The application is developed for Windows XP and later versions, each system is at least a dual core Athlon + 4gigs of memory, with the latest OS updates.

  Thank you
  Will be

  Did you do the "F-Lock" is on? -Side of the Print button.

• Microsoft Natural Ergonomic - keys does not not in MS Applications

  I Erg Keyboard 4000, v1.0. During the upgrade to Windows 8:

  1 tab no longer works in any application. (It is the tab key itself, not Alt + Tab, WinSplat + Tab, etc. There is no error; It's just nothing.
  2. Similarly, the tab in a table used to advance to the next cell, or if, in the last cell, add a new line. Now, it does nothing.

  3. the Caps Lock key does not work in any application.

  4 alt - Tab, Ctrl + Tab, Shift + Tab to not work in any context in any product Office, at least as much Office365 is concerned.

  It's extremely frustrating. I uninstalled and reinstalled; restarted; cold start; pilots; files system activated with SFC, without result; any other suggestions?

  Hey Loren,

  -Have you verified the functionality of the keyboard on different computers with Windows 8?

  I suggest you install the latest version of the software for the mouse and check if it helps.

  http://www.Microsoft.com/hardware/en-in/p/natural-ergonomic-keyboard-4000#support

  You can also check with the hardware support and check.

  How to contact Microsoft if you have questions about your hardware device.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Let us know the results. We will be happy to help you further.

• I'm about to buy the Microsoft Natural Ergonomic Desktop 7000. There are two model numbers?

  Hello.

  Ive used the natural Ergo 4000 for a while now.  But now that I have a new office, I would like to get the wireless model.  I looked around and I see a WTA-00001 and version 4TQ-00001.
  Anyone know the difference between the two?
  Thank you very much in advance.
  Khameleon808

  Hello

  Some web, research suggests that the 4TQ-00001 is black and the WTA-00001 is grey/silver in color, but you must check these results yourself.

  http://www.bing.com/search?q=WTA-00001

  http://www.bing.com/search?q=4TQ-00001

  Don

• Natural ergonomic 4000 keyboard worn

  I have 2 of them, both purchased at Staples last year.  No, I don't have the Bill.  We're still new in the box.  My wife used his for several months.  The keys are dispelled.  I read here and all over the internet, it's very common.  Apparently, Microsoft's answer to this is to 'buy stickers to put on the buttons '.   This is a totally unacceptable solution.  I am currently using a Microsoft Natural MultiMedia Keyboard, which is light gray or white with black letters on the keys.  I used it everyday for years, and there is no wear at all on the keys.  New keyboards are black with white lettering.  They are the model number 1048, manufactured in China.  Serial numbers:
  7687603673143 and
  7687603378803
  Because it is clearly a quality production editing, specifically the choice of the ink used, Microsoft going to do to fix this?  Although one of them is still new in the box, my wife wants connect me it for her because she is worn out.  Clearly he too will have been key in a few months, and then I'll have two keyboards bad, news and a former, which seems fine.  Also, I bought the original Microsoft Natural Keyboard when they came first for years.  It's on a shelf in the basement.  No wear on its buttons or the other.  I replaced it only because the most recent have a smaller footprint, and the plastic had yellowed.
  Thank you.

  Hello

  I would say contact Microsoft hardware support team. Consult the following link:

  http://www.Microsoft.com/hardware/en-in/support/contact-us

  For more information:

  http://www.Microsoft.com/hardware/en-in/reseller

  It will be useful.

• Microsoft Natural ergonomic keyboard 4000 is incompatible with Windows 7

  When I type a letter, I receive a letter and a number (ex: I type "s", the computer prints "s7"). I tried redownloading drivers, but I get an error message that this keyboard is incompatible with Windows 7 and it wont let me start the CD.  I looked on the MS site for a fix, which is there, and I downloaded it, but it did not work.  I am always told the keypad and the software are incompatible.  I went through this process 3 times and now I'm frustrated that I spent $80.00 on a MS product that says that the site of MS is compatible with Windows 7, but it doesn't help with this computer.

  64-bit IntelliType Pro 8.0 download page is available here .  IntelliType Pro 8.0 32-bit is available here .  Is that what you have already installed?

  Vote if you find it useful.  Click on brand or propose as answer if that answers your question.  It will help others find the answer in the future.

• In Win 7 keys on the Microsoft Natural ergonomic Keyboard 4000, Firefox & Thunderbird quick launch only throw in the toolbar, without opening the program, then blurred

  Although these keys to quick launch on this keyboard worked fine on this computer Windows XP, when I switched to Windows 7 64 bit, they started having this problem, but only with Firefox and Thunderbird. If I program these keys to open other programs, they do not have the problem. Therefore, something Firefox/Thunderbird, Win7 64-bit compatibility and software of this keyboard (latest version).

  When I press one of the keys to quick launch on this programmed keyboard for Firefox/Thunderbird, they display a rectangle of program in the taskbar only, but no program opens on the screen. When I move the mouse over this rectangle in the taskbar, the program opens immediately, but to focus.

  I also tried to reset Firefox, but this does not change the behavior at all.

  There are a few users of Thunderbird here, but you could probably get better press here dedicated support site: https://support.mozillamessaging.com/

• Microsoft Natural Keyboard 4000 keyboard shortcuts accidentally mapped on arrow keys and ordinary letter

  My natural 4000 keyboard started acting yesterday: C key starts my web browser, the left arrow button toggles the current window and exit mode full-screen, the down arrow key opens the console of "developer tools" on my browser (both for Chrome as Firefox), and the right arrow key opens the context menu for the active window (i.e. the window that opens when I right click on the window). These all correspond to the functions in the shortcut bar upper keyboard of my keyboard, which still works as usual.

  I don't know how it happened - running Win7 Pro 64-bit and the problem occurred after that I have spammed the letter keys while running an emulator (Mednafen - http://mednafen.sourceforge.net/) to find out how to open a menu.

  I managed to turn off most of my shortcut keys, after that some of the problems have been resolved (for example, I disabled the Web/Home hot key and now my C key opens is no longer the web browser either), but I can't to remap the arrow keys, which makes the text written in a quite heavy browser (I now use the mouse instead of the arrows).

  More information on my system: I use a Logitech Anywhere MX mouse with Logitech Unifying receiver plugged on one of the USB ports on my PC.

  I tried to uninstall my device keyboard drivers reinstall and uninstall my mouse device drivers and restart my PC with the system detached Logitech receiver. Had no effect.

  Any advice as to how I might solve this problem? I'm a bit puzzled and considering retirement finally my Natural Keyboard keyboard (although I'd rather sad having to do) if I can't find a solution.

  Hi, Ahmed.

  This problem may occur if there is a problem with the USB connection on your computer. This problem can also occur if a third-party keyboard control utility is running on your computer. This problem occurs because the analysis codes issued by the keyboard are interpreted differently by each keyboard control utility. It can also be due to having default unexpected or redefined for keys program assignments. Many of the default assignments require that you have installed a program in particular, or you are using an e-mail program supported, Internet browser or media player.

  You can consult the following Microsoft articles and check if it helps.

  Assign the macro or function to your keyboard

  http://support.Microsoft.com/kb/237179

  Fix shortcuts or Volume control keys not working not not on Microsoft keyboards

  http://support.Microsoft.com/kb/932875

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  You can also see the following for more information Microsoft article.

  Troubleshoot wired keyboards that do not or only the erroneous characters category

  http://support.Microsoft.com/kb/258826

  If the problem persists, contact Microsoft Hardware Support.

  http://www.Microsoft.com/hardware/en-us/support

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• keyboard freezes natural ergonomic 4000

  Regularly my whole keyboard will not work. When this happens, unplug and re - plug will not solve issue.  After that I restart my computer, the keyboard works again.

  Hello

   
  I suggest you perform the steps:
   
  Method 1:
  Step 1: safe mode

  Start your computer in safe mode and check the number.

  To start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   
  
   
  Step 2: clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

   
  Method 2:
   
   
  You can uninstall the drivers from Device Manager and reinstall the same thing again.

  1. click on Start, type Device Manager in the start search box and press enter.

  2 look for the device for which you need to uninstall the driver.
  3 right-click and select Uninstall and follow the on-screen instructions.
  4. restart the computer, if prompted.

  Install the latest driver again and check if that makes things better.

  See the links below for more details on the update of drivers:
   
  
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links
  Let us know the results.
   
   

• Microsoft Natural Ergonomic Keyboard wireless 7000

  I just bought and installed this keyboard, which seems to have a major shortcoming on the keyboards of MS proevious - there is no indicator light indicating when num, caps lock, shift, and lock are on - is there a way around this?

  Thank you very much.

  Hi Walter,

  See the link that help you solve the problem below: Troubleshoot the State of Numlock, SCROLLLOCK, lock and CAPS LOCK keys: http://support.microsoft.com/kb/894037

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.