The keyboard mapping during the remote to the W2K8 Server Desktop session is messed up.

Similar Questions

• Lock shift out of synchronization with the 2008 Server RDP session

  Hello

  A few of our users have problems with their caps lock being out of sync with their RDP session, that is to say if their keyboard displays light as being off, they type and get capital letters when they press the SHIFT key on their keyboard to stop the caps lock lights up and they then type in lowercase.  I can't find any resolution on the web about what is happening in a 2008 R2 server environment.

  Can anyone help?

  Thanks in advance.

  The gurus server hangs in the TechNet forums, here, we are dealing with consumers having problems with Windows or system performance.

  http://social.technet.Microsoft.com/forums/en-us/categories

• iPad Pro. The keyboard can be used remotely (not physically attached) or you can use a standard apple wireless keyboard

  iPad Pro. The keyboard can be used remotely (not physically attached) or you can use a standard apple wireless keyboard

  I assume that you mean the keyboard built into the 'smart cover' - it must be in contact with the iPad.

  A wireless keyboard Apple has been reported as working with an iPad Pro. Plug Apple for the new State of "magic keyboard" that it requires a Mac with os x 10.11 or later - he does not mention the iPads. Third-party Bluetooth keyboard should work.

• Keyboard mapping problem caused by the virus.

  Recent activity of the virus, an exe PC Tools, which followed without his knowledge, was opened and loaded. The removal of virus has been resolved by Norton but left the PC with keyboard problems. Some keys on the keyboard will power off the computer, restart in safe mode. As 'f' keys, ctrl, entry etc... but not all the time.  PC works fine, but having trouble isolating the way to replace the keyboard map and see if it cures the problem. After that a complete scrub and the download of the original with better security software! Thanks for help

  Hello

  1. What is the serial number and model of the keyboard?

  2. is it wireless or wired?

  3. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the article mentioned below and check if the problem persists.

  http://support.Microsoft.com/kb/258826

  Hope this information helps.

• Losing keyboard focus when the remote desktop session

  Hello

  I have several computers Win7 it remote to the server of a hosting company. Our users will register in the servers of the hosting via remote desktop. The question that arises is that the keyboard stops working after a locking of the user, the computer, then returns after a short period of time to continue working. The remote desktop session will remain functional when the computer is locked. After unlocking the computer, the keyboard does not work in the remote session. The mouse is not affected by this and minimizing the session, the keyboard works fine on the local session. Sometimes, you need to restore down and then restore back or minimize the RDP session several times to get the keyboard works within the remote session. A few times, close the RDP session will cause the keyboard work again. Someone at - he lived it and have a resolution of this problem? This issue seems to occur more frequently and we have already created on the remote server user profiles, but nothing helped. Thank you for your help.
  Jon
  Hi Jon,
   

  Thanks for posting your question in the Microsoft Community Forums.

   
  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:
  TechNet forums various Windows 7

• The evil in the guest OS keyboard mapping

  Hi all

  I ", running fusion 4.1.1 on Lion.

  I built a virtual machine with Lion too as a guest operating system.

  I realized that my keybord in my virtual machine is not well mapped.

  In fact, I have a couple of keys which, if you press on, do not correspond to the correct character.

  The keyboard, which is a wireless apple with Italian layout keyboard, works very well in the host environment.

  How can I solve this problem?

  Thank you

  Concerning

  After a few quick tests, here are two methods that certainly seem to work:

  1 copy (the vertical bar, etc etc) and paste directly between the host and guest: for example, for |, an initial cmd-C in the host and then, if necessary, a cmd-V in the comments and you're done.

  2. connect to the guest from the host with screen sharing (after you have enabled in the comments, of course): in this case, the keyboard mapping is that right from the beginning (he uses the host); and no doubt, you also need network bridged in the comments: no solution ideal, but might be better than the first, if you don't mind the drop in performance possible.

  Other possible solutions? Who knows...

• Remote access VPN with ASA 5510 by using the DHCP server

  Hello

  Can someone please share your knowledge to help me find out why I'm not able to receive an IP address on the remote access VPN connection so that I can get an IP local pool DHCP?

  I'm trying to set up remote access VPN with ASA 5510. It works with dhcp local pool but does not seem to work when I tried to use an existing DHCP server. It is tested in an internal network as follows:

  !

  ASA Version 8.2 (5)

  !

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP 10.6.0.12 255.255.254.0

  !

  IP local pool testpool 10.6.240.150 - 10.6.240.159 a mask of 255.255.248.0. (worked with it)

  !

  Route inside 0.0.0.0 0.0.0.0 10.6.0.1 1

  !

  Crypto ipsec transform-set esp-3des esp-md5-hmac FirstSet

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  Crypto-map dynamic dyn1 1jeu transform-set FirstSet

  dynamic mymap 1 dyn1 ipsec-isakmp crypto map

  mymap map crypto inside interface

  crypto ISAKMP allow inside

  crypto ISAKMP policy 1

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 43200

  !

  VPN-addr-assign aaa

  VPN-addr-assign dhcp

  !

  internal group testgroup strategy

  testgroup group policy attributes

  DHCP-network-scope 10.6.192.1

  enable IPSec-udp

  IPSec-udp-port 10000

  !

  username testlay password * encrypted

  !

  tunnel-group testgroup type remote access

  tunnel-group testgroup General attributes

  strategy-group-by default testgroup

  DHCP-server 10.6.20.3

  testgroup group tunnel ipsec-attributes

  pre-shared key *.

  !

  I got following output when I test connect to the ASA with Cisco VPN client 5.0

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: (4) SA (1) + KE + NUNCIO (10) + ID (5), HDR + VENDO

  4024 bytesR copied in 3,41 0 seconds (1341 by(tes/sec) 13) of the SELLER (13) seller (13) + the SELLER (13), as well as the SELLER (13) ++ (0) NONE total length: 853

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, SA payload processing

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ke payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ISA_KE

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, nonce payload processing

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received xauth V6 VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, DPD received VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received Fragmentation VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received NAT-Traversal worm 02 VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, the customer has received Cisco Unity VID

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, connection landed on tunnel_group testgroup

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA payload processing

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA proposal # 1, turn # 9 entry overall IKE acceptable matches # 1

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build the payloads of ISAKMP security

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building ke payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building nonce payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Generating keys for answering machine...

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of payload ID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of Cisco Unity VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing payload V6 VID xauth

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building dpd vid payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing the payload of the NAT-Traversal VID ver 02

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of Fragmentation VID + load useful functionality

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, send Altiga/Cisco VPN3000/Cisco ASA GW VID

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR SA (1) KE (4) NUNCIO (10) + ID (5) + HASH (8) + SELLER (13) + the SELLER (13) + the SELLER (13) + the SELLER (13) NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) total length: 440

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: HDR + HASH (8) + NOTIFY (11) + NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) overall length: 168

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing hash payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing notify payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, useful treatment IOS/PIX Vendor ID (version: 1.0.0 capabilities: 00000408)

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, the customer has received Cisco Unity VID

  Jan 16 15:39:21 [IKEv1]: Group = testgroup, I

  [OK]

  KenS-mgmt-012 # P = 10.15.200.108, status of automatic NAT detection: remote end is NOT behind a NAT device this end is NOT behind a NAT device

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, empty building hash payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash qm

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 72

  Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 87

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, process_attr(): enter!

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, transformation MODE_CFG response attributes.

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary DNS = authorized

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary DNS = authorized

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized primary WINS

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized secondary WINS

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Compression IP = disabled

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Split Tunneling political = disabled

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: setting Proxy browser = no - modify

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: browser Local Proxy bypass = disable

  Jan 16 15:39:26 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, (testlay) the authenticated user.

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

  Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 64

  Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + NONE (0) overall length: 60

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cfg ACK processing attributes

  Jan 16 15:39:27 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 49ae1bb8) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 182

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, treatment cfg request attributes

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 address!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 network mask!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for DNS server address.

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the address of the WINS server.

  Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, transaction mode attribute unhandled received: 5

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the banner!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting save PW!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: receipt of request for default domain name!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for Split-Tunnel list!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for split DNS!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for PFS setting!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Proxy Client browser setting!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the list of backup peer ip - sec!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting disconnect from the Client Smartcard Removal!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Version of the Application.

  Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Type of Client: Windows NT Client Application Version: 5.0.07.0440

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for FWTYPE!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: request received for the DHCP for DDNS hostname is: DEC20128!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the UDP Port!

  Jan 16 15:39:32 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets.  No last packet retransmit.

  Jan 16 15:39:37 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = b04e830f) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84

  Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing hash payload

  Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing notify payload

  Jan 16 15:39:37 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets.  No last packet retransmit.

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE has received the response from type [] at the request of the utility of IP address

  Jan 16 15:39:39 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cannot get an IP address for the remote peer

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE TM V6 WSF (struct & 0xd8030048) , : TM_DONE, EV_ERROR--> TM_BLD_REPLY, EV_IP_FAIL--> TM_BLD_REPLY NullEvent--> TM_BLD_REPLY, EV_GET_IP--> TM_BLD_REPLY, EV_NEED_IP--> TM_WAIT_REQ, EV_PROC_MSG--> TM_WAIT_REQ, EV_HASH_OK--> TM_WAIT_REQ, NullEvent

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE AM Responder WSF (struct & 0xd82b6740) , : AM_DONE, EV_ERROR--> AM_TM_INIT_MODECFG_V6H, EV_TM_FAIL--> AM_TM_INIT_MODECFG_V6H NullEvent--> AM_TM_INIT_MODECFG, EV_WAIT--> AM_TM_INIT_XAUTH_V6H, EV_CHECK_QM_MSG--> AM_TM_INIT_XAUTH_V6H, EV_TM_XAUTH_OK--> AM_TM_INIT_XAUTH_V6H NullEvent--> AM_TM_INIT_XAUTH_V6H, EV_ACTIVATE_NEW_SA

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE SA AM:bd3a9a4b ending: 0x0945c001, refcnt flags 0, tuncnt 0

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, sending clear/delete with the message of reason

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing the payload to delete IKE

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

  Jan 16 15:39:39 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 9de30522) with payloads: HDR HASH (8) + DELETE (12) + (0) NONE total length: 80

  Kind regards

  Lay

  For the RADIUS, you need a definition of server-aaa:

  Protocol AAA - NPS RADIUS server RADIUS

  AAA-server RADIUS NPS (inside) host 10.10.18.12

  key *.

  authentication port 1812

  accounting-port 1813

  and tell your tunnel-group for this server:

  General-attributes of VPN Tunnel-group

  Group-NPS LOCAL RADIUS authentication server

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Remote Desktop sessions fail with the error of data encryption

  All my remote desktop sessions attempts fail with an error of bull data encryption *. It seems that half of the world has this error and no one can provide an answer. Before binding you to an answer without value, it is all my clients servers with Windows Server 2003-2011 everything, cannot RDP to any of them.

  Most suggested answers a problem of router or server specific problem or suggest disabling large unloading on the network card.  Well, this problem hooked 30 + servers I've tried lately.  I tried with unloading defined on deactivate and activate.  I tried ethernet and wifi.  I tried to do different internet connect, work, home to various customer sites.

  In other words, I can no longer use RDP to connect to servers on ANY connection.  It simply doesn't work anymore.

  I run Windows 7 32 bit and this couple suddenly some days ago.  Before you start, no virus, no updated drivers... blah blah blah.

  The first day, he started, he wouldn't let me RDP via VPN but if I went through the external IP (mapped ports).  Then, it only works if I was on ethernet, not the wireless.  Then he just decided it wouldn't work at all.  Today, that I even tried to get back into the work remotely via RWW and the RDP ActiveX... did not work.  Tried both servers a SBS 2003 to 2008.  Nope.

  XP has a ten years more of life.  Win7 has done roughly three years, now it starts to fall apart.

  If you can fix this before moving on to Windows 8, and without having to wipe my whole PC, it would be much appreciated.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

• Cannot run VI on the Remote Machine using VI Server

  Hello!

  I'm trying to run a VI on a remote machine using VI server, but not luck. I used the 'remote execution VI' off the coast of LV inter II. I have check and follow up of the VI server configuration. I also tried to turn firewall on the PC but still nothing. Can't think of anything whatsoever that judgment of the VI to run on the remote PC. Any help will be appreciated. Thank you!

  Hi KowdTek,

  You do something like that?

  

  Thanks for choosing National instruments.

  Aaron Peña

  National Instruments

  Technical sales engineer

  http://www.NI.com/support

• Error message from DPM 2010 and an unexpected error has occurred on the DPM server during a VSS operation.

  Hello

  I have a server running on a Windows 2008 R2 server DPM 2010

  Currently save a mix of virtual and physical machines, these are a mix of Windows Server 2003 SP2, 2008 & 2008 R2.

  The DPM was previously a bit crumbly, but it was supposed to be caused by lack of disk space. A QNAP server was introduced and configured as an iSCSI target. After the initial problems, it works now.

  EXCEPT

  Three volumes of backup not. They were part of the protection group but they had no point of recovery at all. I deleted their protection groups and have tried to add them to their original groups. These 3 volumes all fail with the following error message:

  An unexpected error occurred on the DPM server machine during a VSS operation.

  Error details: VssError:Shadow copy the specified volume only is not supported. (0x8004230C)

  3 volumes are on 3 different servers.

  All 3 servers are running Windows 2003 SP2

  3 servers have other volumes that are save successfully and consistantly

  There are an additional 3 servers Windows 2003 SP2 that all volumes save successfully and consistantly.

  I can run shadow copies on these three volumes on servers

  All servers run the latest DPM Agents

  3 volumes have unused production capacities, Gig instead of Mb

  The pool of storage on the DPM server has two disks in the storage pool, the local disk has 10 TB of capacity and 45% free, the iSCSI target has capacity to 55 and 78% free.

  There are no. VSS errors in system or application logs (or I've noticed in just about any other log file) on the DPM server or the customer Server

  I have tried to add in the protection group, 3 volumes at once, one at a time or a small directory, or create a new protection group and still get the same errors.

  I ran the Windows updates on these servers

  So far all I can say the disk permissions look OK and match those of the other volumes of work.

  I know that having two drives in the storage pool is not ideal, and it will be changed but not up to what I have fixed the problems on the three volumes.

  Hello

  I suggest you to report this issue in support for Windows Server 2008 R2: http://technet.microsoft.com/en-us/windowsserver/bb512923

  Thank you.

• Unable to take remote because of the error in the window Server 2000

  Hello
  I am confronted with the question in Windows server 2000

  The terminal server server has exceeded the maximum number of allowed connections.
  - and -
  The system cannot open session (1B8E). Try again or contact your system administrator.
  
  I've tried (run the Services Terminal Server Administration tool from another computer. By using the domain administrator account, click Start, click Run, type \\terminalservername\c$ and then click OK. Open the Winnt\System32 folder, and then double-click Tsadmin.exe. In Terminal Services Manager, click your server, then click the right-click on the disconnected session Sessions tab and then click Reset.) but in the present, I got a message "you are not authentication."

  In the window 2008 R2 if we had the same problem of terminal server server we can use mstsc/Admin to connect to the server, but while I use mstsc/Admin in window 2000 I am faced with an error even that above. I want to solve this error remotly. How can I take distance Please help

  Hello arshkumanR,

  Microsoft Communities is for consumer issues in Windows 8, Windows 7, Windows Vista and Windows XP. Your problem is with Windows Server 2000 and would be better treated in TechNet for ITPros.
  Click here to transfer your question in the forums of Windows 2000 server on TechNet.

  They can help with your problem on there.

  Sincerely,

  Marilyn

• Can I use the Wireless Comfort Desktop 5000 keyboard and receiver with a Mobile 4000 mouse?

  Hi, as the title says: can I use the Wireless Comfort Desktop 5000 keyboard and receiver with a Mobile 4000 mouse? I have the kit, but the mouse is to bulky for me and I would use a mouse Microsoft Mobile 4000 but with the same receiver as the keyboard of the kit, is it possible? Thank you

  Hello

  looks at it's not going to work. Wireless products are programmed to be used with a specific key, so they won't work on another dongle.

  B Eddie

• Games on the Internet give the error "a network error occurred during communication with the game server. "Error code: 0 x 80041006.

  I ran the System File Checker tool analysis. Response has been no problem with the configurations. Also, I did uninstall and reinstall. I keep getting the message: "a network error occurred during communication with the game server. "Error code: 0 x 80041006 ' this error message occurs on all the computers I own.

  Actually, no, the answer in the links were also less than helpful... suggested this, that.  Things that I had already done b4 posting my question.
  More funny: after that I posted my comment about the fault is not not in my machine and those of thousands of others, but in MS, spades servers suddenly started working again.  Coincidence? No doubt, but still...

• How to maximize the number of RDP session for Remote Desktop connections in windows 2008 server?

  1. How to maximize the number of RDP session for Remote Desktop connections in windows 2008 server?
  2. By default, the system says 2. and to not change/increase.
  3. is everything permissible special necessary to buy?
  Hello
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is related to maximize the number of RDP session for Office remote connections to the server. Appropriate in instances of Windows Server.

  Please post your question in the Forums of Windows Server.

• Home folders mapping on the old server and do not synchronize

  Original title: problem individuals file

  Hello world!

  We recently changed files private from the old server to a new users but the problem is that offline files are always mapping on the old server, therefore the synchronization failed.

  Best regards.

  Hello

  The question you have posted will be well suited in the TechNet forums. Click on the link below.

  http://social.technet.Microsoft.com/forums/en-us/winserverGP/threads