The miniature display of the image in the list of results?

Similar Questions

• The list of results in TS2013

  I want to get the list of results of TS2013 Custom report in labview vi, but it error for the purpose of property 'MainSequenceResult-> TS', please help me, thanks

  Change the '-> 'to'.'

  Search strings do not include "->". Who is allowed in expressions (I'm agree it is strange that lookupstrings do not support-> them then I'll submit a suggestion they do.)

  Another way to handle this is:

  mainresults = GetValInterface ("TestSocket.MainSequenceResult", 0);

  then

  mainresults. GetPropertyObject ("TS. (SequenceCall.ResultList', 0);

  but using a '. ' instead of '->' also works.

  -Doug

• Include as the value of the clause in the list of results

  I have several similar terms on the same column in my query. Is it possible to include the value of the clause type in the result set?

  For example

  SELECT * ADDR ADDRESS WHERE

  addr. Line LIKE '% 1% '.

  OR addr.line LIKE '% 2 '.

  OR addr.line LIKE '% 3% '.

  OR addr.line LIKE '% 4% ';

  The result set contains all the addresses including ONE, TWO, THREE, FOUR. Now, I would like to see the result defined as

  Address1ONE | ONE

  Address2TWO | TWO

  THREEaddr | THREE

  any clue?

  R

  Use CASE:

  SELECT addr.line,

  CASE

  WHEN addr.line LIKE '% 1% ' THEN 'ONE '.

  WHEN addr.line LIKE '% 2% ', THEN 'TWO '.

  WHEN addr.line LIKE '% 3% ' THEN 'THREE '.

  ELSE 'FOUR '.

  END

  The ADDRESS ADDR

  WHERE addr.line LIKE '% 1% '.

  OR addr.line LIKE '% 2 '.

  OR addr.line LIKE '% 3% '.

  OR addr.line LIKE '% 4% '.

  /

  SY.

• Go to the list of the results of the main sequence in my plugin...

  Hi guys,.

  OK, first post here, but I'm a little stuck. I am writing a plugin model to generate a custom HTML report (my requirement has a very specific layout for the report, which is not at all compatible with the html reports generated by teststand normally). Anyway. I generated all labview code, I want to make the report in the format I need, but I'm really bad at actually get information of teststand in a way that is easier.

  What I want to do is browse through the list of the results of the main sequence in the callback sequence DUT-Done of the sequence of pluging, which is stored in

  Parameters.MainSequenceResult.TS.SequenceCall.ResultList according to the documentation, but how can I really access it as a table I can go? All I have in my list of parameter is a reference to the parameters. MainSequenceResult, and for the life of me I can't work out what to call this knowledge actually just get it into a format that I can then use to browse in a loop "foreach" to get out of these settings.

  I'm on a windows machine and teststand 2014 7.

  Any help you could give would be really appreciated!

  J

  The list of top level result is: Parameters.MainSequenceResult.TS.SequenceCall.ResultList

  To find it, I dragged Parameters.MainSequenceResult in the Watch window to a breakpoint and developed it until I found the list of results.

  The ResultList is a PropertyObject which is an array of containers, so as the methods GetPropertyObjectByOffset and GetNumElements are going to work on that.

• XML format for the export of result set by the user

  Hello

  I would like to export my entire test sequence results in a new XML file. The format of the XML file is given and fixed.

  My first attempt was to create a LabView VI to export data in XML format.

  I read that there is no way to set the format with the standard version of LabView. But I have a suspicion that there is an upgrade so I can set the XML format by myself.

  Does anyone know what update I need?

  Or did someone knows how to export XML in a different way?

  Thanks for your help!

  You're right that the current implementation does not do.

  You have two options:

  1. create your own plugin that analyzes your resultlist and generates the XML file

  2. create something late MainSequence which analyses the resultlist and generates the XML file

  It depends on the scope of your project.  If there is one thing to type 1 and then option 2 would be easier.  If it's something, you use through multiple tests and then I'd go with Option 1.

  In both cases, you must go to analyze thorugh the results list and generate code for XML.  I recommend keeping the algorithm in TestStand to browse the resultlist.  It is much easier and simpler.  Simply create a sous-suite that does and pass the list of results.

  Kind regards

• How to remove images or themes from the list of display properties for selected wallpapers?

  Well they are. When I go into the Control Panel, click or select the display icon, I come to the display properties.  Kind of dumb pictures obtained in the list of display properties.  I want to remove them from the list.  I n my ending is never trying to clean my computer, I want to delete these images and selected icons.  I really don't remember adding photos to the list of display properties for desktop. But they are there

  You must move the image files where they are now (probably in my pictures). Windows XP retrieves files image from the following paths:

  C:\WINDOWS BMP files

  The files BMP, JPG, GIF, JPE, DIB, PNG, HTM from the following locations:

  C:\Windows\Web\Wallpaper
  C:\Documents and Settings\photos \My Documents\My [& ALL THE sub FOLDERS]
  C:\Documents and Settings\\Application Data\Microsoft\Internet explore
  C:\Program Files\Plus! \Themes [* & ALL subfolders *]

  So for example, if the 'silent pictures' are in your My Documents\My Pictures folder (or a folder in my pictures) and you want to keep them, just move them to the folder My Documents of parent instead. If you don't want to keep them, just delete the files.

  MS - MVP - Elephant Boy computers - don't panic!

• Problems to display the image in the region from the list

  Hello everyone

  I problems to View an image not to come de the worksapce in one list

  Create one region type list using le vertical image list model et j’ai want to le image only is displayed in each entry de la list come du web Server, do this easily in a report in following way:

  "< img src="/apps_resources/APP121/glyphicons_halflings_080_circle_plus.png "alt =" ">

  But it does not work work on one list, I tried different ways and No work

  Anyone not know How do this correctly?

  Best regards

  Apex 4.2.0

  Oracle 11 g R2

  Apexlistener 2.6 deployed in tomcat

  The problem is that the image prefix is hardcoded in the src URL in the model of vertical image list. Make a copy of the template, edit to remove the chain of substitution #IMAGE_PREFIX # amongst the current list template definitions and model list associated with and use the new model to the region of your list.

• I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I had created a slideshow of practice and the background image was not displayed as an image in itself. How to

  I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I have created a slideshow of practice and the background image was not displayed as an image in itself. How to make it behave?

  Another approach, perhaps a little more elegant (?). Create a collection that includes images for the slideshow. Include the background image in the collection. Drag the background image in the Panel to designate. Then, remove this image from the collection and create the slide show. I just tried and it works, too.

• Display a random image whenever the page is refreshed...

  Hello

  I am creating a website using MUSE. Everything is ready, but there is a prob... I have 200 different images to display on my site. How can I set up to display a random image whenever the page is refreshed?

  You can use the slideshow widget "full screen" on your master page with the following parameters:

  

• Press the button to display a random image

  Hello

  I'm used to working with the timeline and don't often go into the side of the things actionscript.

  I created a second animation 60 an hourglass timer countdown, and next to him, is a map showing a Word. I need this whole animation to play when you press a button 'start game' and also I need the word on the card to be a word at random. All the words are saved as separate vector files for now.

  What is the best way to handle this in the timeline, and what would be the code to display a random image?

  The only discussion I found on these are memory games and they are more complex for what I need!

  I just thought I would put the answer incase anyone needs help with that.

  In the end, I added each image as a picture on the same layer in a clip and added a stop(); action to each image.

  I added this line of code for the keyframe with the movieclip on the timeline:

  This. MovieClipName.gotoAndPlay (Math.round (Math.random () * 4));   4 set up the number of images that you have in the movieclip

  Works great so far - I'll let know you if he throws up additional problems

• Display a default Image in the case of the Image src attribute points to null

  Hello

  I am display pictures on DataGrid by reading an XML file.
  This works very well if the src of the Image is present.
  Now my question is that sometimes the src of the Image can be null, so in this case, I need to
  display some default Image.

  < mx:HBox id = "hBox" >
  < mx:Image source="{rep.currentItem.@src}"/ >
  < / mx:HBox >

  
  < images >
  < image src = "images/One.png" / > "
  < src="images/Two.png"/ image >
  < image src = "" / >
  < / images >

  Please tell me how to show a default Image in case of Image src attribute is null.

  Please share your ideas on this.

  Thanks in advance.

  bind the source of the image to a function

  then write a function to detect if an image is present

  private void getImage (): String
  {

  If ( rep.currentItem.@src == null)

  {
  return "default.png";

  }

  on the other

  {

  Return rep.currentItem.@src;

  }
  }

• Image display all dragging in the list

  Hi all
  
  Am using list controls to display the data and VBox is my itemRenderer. As we know, by default, the list/DataGrid provides the features drag-and - déposer. In the itemrenderer displays the controls CheckBox and a few others as well as the dataFields and when I try to move an item that it is displayed as an immense territory.
  
  I want to replace the item with an Image (icon) while dragging. How do I do that? I tried with the implementation of the the Dragmanager doDrag but I am unable to see an icon of the image by dragging. can someone solve my problem?
  
  No matter what help can be appreciated and thanks in advance.
  
  Here is the code example
  
  
  <? XML version = "1.0" encoding = "utf-8"? >
  "" < mx:Application xmlns:mx = ' http://www.adobe.com/2006/mxml ' verticalAlign = "middle" >
  < mx:Script >
  <! [CDATA]
  Import mx.collections.ArrayCollection;
  Import mx.managers.DragManager;
  Import mx.core.DragSource;
  Import mx.controls.Image;
  Import mx.events.DragEvent;
  Import mx.controls.Alert;
  
  [Bindable]
  private var initData:ArrayCollection = new ArrayCollection([)
  {Book: 'DBMS', author: 'Sudarshan'},
  {Book: 'C', author: "Kanethkar Yaswanth" ""},
  {Book: 'C++', author: 'JBalaguruswamy'},
  ([{Book: "Software engineering", author: "Pressman"}]) ;
  
  private void onDragOver(event:MouseEvent):void {}
  var dragInitiator:List = List (event.currentTarget);
  var dragSource:DragSource = new DragSource();
  dragSource.addData (dragInitiator, "list");
  
  var displayIcon:Image = new Image();
  displayIcon.source = "resources/images/todo.png";
  DragManager.doDrag (dragInitiator, dragSource, event, displayIcon);
  
  }
  []] >
  < / mx:Script >
  
  < mx:List width = "50%" height = "50%" dragEnabled = "true" dropEnabled = "true" dragMoveEnabled = "true".
  dragOver = "onDragOver (event)" dataProvider = "{initData}" > "
  
  < mx:itemRenderer >
  < mx:Component >
  < mx:VBox width = '100 percent"height ="100% ">
  < mx:HBox >
  < mx:CheckBox / >
  < mx:Label text = "Book: {data.book}" / >
  < / mx:HBox >
  < mx:Label text = "Author: {data.author}" paddingLeft = "25" / > ""
  < / mx:VBox >
  < / mx:Component >
  < / mx:itemRenderer >
  < / mx:List >
  < / mx:Application >

  Hi all

  Find me the solution for this problem simply by changing the mouseMove event dragOver event . Now you can test this and can use both if you want.

  Here is the final code

• System Image recovery files Windows displays is not in the list of files in recovery

  Windows 7 Professional - to date from Windows update.

  I just create a backup system on a USB hard drive external image. Looking at the USB directory for the backup watch directory that it - there is a folder with the name of the current computer.

  If I then try to restore the backup on the same disk, from the control panel GUI or from a Windows recovery disk recent backup does not appear in the list of available to restore images.  Other backups of different machines that have been recorded on this disk image appear in the list!

  Any ideas?

  Problem solved.

  The external USB hard drive had a backup failed on it.  If you have made a list of directories to BACK of all the backup files to image the external hard drive, you'll see all the backups but system restore image didn't show those until the backup has failed/corrupt.

  Remove the backup directory tree failed then permit restoration System Image list all available external hard disk backups.

  Thanks to all who watched this and helped.

• Why the title bar on Firefox and the Windows 7 taskbar let distorted image when a list of folders crosses one or the other?

  I use a lot of folders in my bookmarks list. I noticed that with AMD and Nvidia cards based on video, that if I use a folder in my bookmarks list that a lot, a lot of bookmarks, the bookmark list will cross the box title bar of Firefox and the taskbar in Windows 7 and down. When this happens, the title bar on Firefox versions 8-10 and the taskbar at the bottom let images from the list of bookmarks which do not disappear (at least that I have use F11 mode full screen to clear away from the image and bring it back to normal). If I use a Matrox video card, it doesn't. Why is this?

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers

• my 500 vacation photos are now on the lists section of the control panel-display wallpaper how to make their return to which they belong?

  Downloaded the camera vacation photos and sorted by them by putting each location days in it is a separate file. I also received a disc of NASA just with scenes of wallpaper on it and downloaded it.  These points of view, NASA, to another disc I changed once a week. I keep them in a separate folder named desktop wallpaper photos, in my position of photos. I went to change this view for weeks and not only discovered that all these photos have been in the display list folder / in Control Panel, but also all the pictures in the files of our holiday, which should have been in the image file in my documents. There are also pictures of my family photos files that are in the selection of wallpaper from the 'view' file in the documents.  I will return to my pictures folder and there not a file here for them, which means that it is not a copy of the file, but the actual file. I did not do in the lists of display/control panels. How can I remove or cut pictures that came the wallpaper display lists and put them in the my documents/images files where they should be. Tried to cut and paste functionality, but nothing of this nature appears.

  Hello

  Navigate to the folder where the photos are and then right-click on the image and click on copy and then open the folder My Documents/photo then right-click and press on paste.  Since you have a lot of picctures you can hold CTRL and left click each photo in this way they need only hit copy once.

   
  I hope this helps.