The loan time CPU and reservations

Similar Questions

• What is the difference between the time cpu and cpu in AWR db?

  Hi, experts:

  What is the difference between the time cpu and cpu in AWR db?

  As a general rule, 'DC CPU', 'CPU Time' (and 'DB CPU of "TIME") are references to the same (i.e., a measure of the amount of time the instance of Oracle on the CPU), but to avoid any risk of misunderstanding, it is best to give us a little background labels - i.e. lines 6 or 7 containing an example of every use of one of your AWR reports

  Concerning

  Jonathan Lewis

• How to get the loan from CPU percentage?

  Hi people,

  When I read this blog of Mr. Epping http://www.yellow-bricks.com/ESXTOP/ it seems that CPU ready is indicated as a percentage %, while in the vsphere Performace console | The Advanced tab, it shows you only in milliseconds per 20 seconds.

  If someone here can help me in the creation or modification of the script (created by Luc D) to calculate the loan of CPU percentage?

  $metrics = "cpu.usage.average", "cpu.ready.summation", "cpu.swapwait.summation", "mem.active.average".
  $entities = get-VM-name
  $start = (get-Date). AddDays(-5)
  $report = get-Stat-entity $entities - Stat $metrics - Realtime-start $start |
  Group-object - property EntityId, Timestamp | %{
  New-object PSObject-property @ {}
  Name = $_. Group [0]. @entity.name
  Time = $_. Group [0]. Timestamp
  CpuAvg = ($_.) Group | where {$_.} MetricId - eq "cpu.usage.average"}). Value
  CpuRdy = ($_.) Group | where {$_.} MetricId - eq "cpu.ready.summation" - and $_. ({Instance - eq ' '}). Value
  CpuSwpWait = ($_.) Group | where {$_.} MetricId - eq "cpu.swapwait.summation" - and $_. ({Instance - eq ' '}). Value
  MemActAvg = ($_.) Group | where {$_.} MetricId - eq "mem.active.average"}). Value
  }
  }
  $report | Sort-Object Name, time | Export-Csv "C:\VMstats.csv" - NoTypeInformation - UseCulture

  Any kind of help would be greatly appreciated.

  Thank you.

  It depends on the interval you are looking at.

  The 20000 is valid if you get real-time statistics, where the length of the interval is 20 seconds.

  In the example above, the script gets its Historical interval 1stats, which has a range of 300 seconds.

  That's what I do with $_. Interval * 1000 which is 300 * 1000 = 300000

• I bought standard Adobe acrobat 8, I have the chance to cpu and know that I must download the support software

  I bought standard Adobe acrobat 8, I have the chance to cpu and know that I must download the support software

  Hey juanb52695155,

  Here is the link to download Acrobat 8 standard: https://files.acrobat.com/a/preview/80aa8c58-2951-494e-808a-fb61a6b4aa29

  Please keep a copy of it scared you need it later.

  The legacy version of the software are no longer provided by Adobe.

  Kind regards

  Nicos

• How to slow down the sound from a video clip to the exact time (keyframes) and values?

  How to slow down the sound from a video clip to the exact time (keyframes) and values?

  I used the timewarp, but the sound is not affected.

  It is to be expected. Only the native time remapping affects sound, but given that EI is not an audio processing application, the quality is terrible. You must use the hearing or a similar program.

  Mylenium

• at the same time production and measuring the pulse

  Hello everyone,

  I'm generates a pulse for specific time. Now, I want to measure within the same daq card. I've done Vi for him but he has an error. I have USB daq-6343. I enclose my Vi here.

  The problem is I am able to get pulses generated at PIN 6 PFI but reading Vi watch time-out error.

  I plugged the wire between PFI 1 pin and PFI 6 pins on the DAQ card.

  So please suggest me what to do to eliminate this error.

  Thanks & best regards,

  I just looked at your original vi, I had looked only at the most distant (corrected) a previously.  I don't see a good reason to read timeout error you have immediately.  Record of an error timeout on your attempt reading suggests that the code was executed without error so far, including the beginning of the generation of pulses.  That would leave wondering on physical cable connection or possibly some undesirable side effects caused by your cleanup code when you three States a PFI lines.

  The other issue was my suggestion to leave DAQmx Timing.vi outside of the configuration string entirely for cases like this where you only want to build a single pulse.  To be honest, it's a habit & practice I adopted a long time ago.  I thought one of the reasons was that the finished pulse trains required a minimum of 2 samples.  A bit of test code showed me that it isn't true, if my memory tells me there was a time when it * used * to be true.  I don't remember if I have errors or if the task has chosen to generate 2 pulses with just a warning, or something.  I just remember that, while he was working on a module that was supposed to be able to produce any number of pulses from 1 to N, I found that I wasn't actually able to support the case of 1 pulse by asking just 1 sample over sample mode.

  * Anyway *, the other reason to avoid sampling over for a single pulse mode is that in the past, this would consume actually 2 counters on DAQ cards.  Generated the pulse (s) while the other was a help that triggered the first to control the number of generated pulses.  It was unnecessary as you could * also * generate a single pulse leaving the DAQmx Timing.vi out of the config, a method that used only 1 meter.

  X-series cards (like yours) don't consume over 2 programmable counters of the user to generate finite pulse trains, so the lesson I learned a long time ago and was trying to convey is perhaps not so important in your case.  I recommend it even if you know that you will always generate a single pulse, simply because he considered the standard way to generate a single pulse (as seen in examples of navigation).

  -Kevin P

• difference between the real time module and module fpga

  Hi experts,

  I was wondering if someone could tell me the difference between the FPGA and the module in real time (in short).

  My understanding is that the FPGA module facilitates code LV that can then be designed for the specific advice of RIO, I have used this a bit in the past.

  The real time module, I'm a little more unsure about, all I know is that it allows the creation of a 'real time' i.e. deterministic environment.

  My request is this: I wish I had several control loops running on two tables of RIO, with the host PC mainly used for recording data and user interface. I see that I have no need of RT on the host (Win XP should be good).

  Do I need the RT module?

  You are right.  In the scenario you describe, you won't need to LabVIEW RT. LabVIEW RT is used to create a deterministic execution on specific targets for intel such as the PXI-8106 and PXI-8108.  You can still use strings and floating point on RT.

• I have problems with my computer with the time remaining after I reset the clock and made sure it was on the correct time zone and summer time has been check the battery has also been replaced

  and it will not keep the exact time it will keep accelerate at least 5 minutes or more.

  I don't know what else to do about it. You can someone help me?

  I still find myself make too many assumptions.
  First of all, I guess your derivative of clock occurs during the time when the computer is running and not during the period where it is off (or immediately early)?
  Second, I'm assuming that when you run the command "w32tm/Resync" above, the clock made it back to the correct time and no errors were reported?
  Third, you say that your clock drift 5 minutes or more, but you do not tell us how long this gain occurs.  It is two times more win if you wait twice as long to check?  Is the gain gradual or sudden?  Keep he wins or if he stops wins once it arrives before?

  Conditions of default for a computer connected non-member of the field, the time will be updated network-time only at the start and then once a week.  If you are winning too much too quickly, you can adjust how many times your computer asks for time.  Computers in the domain must be more precise and one every hour for a default time synchronization.  You can set your W32tm to that of a computer in the domain to resynchronize your computer more often (SpecialPollInterval).  Here are two articles that describe the clock settings:

  "How to synchronize the time with the time service Windows in Windows XP"
    <>http://support.Microsoft.com/kb/307897 >
  "Time Windows Services tools and settings.
    <>http://TechNet.Microsoft.com/en-us/library/cc773263%28V=WS.10%29.aspx >

  HTH,
  JW

• the clients VMware CPU and CPU cores

  Hello

  I'm looking a bit and I know that for the physical esx host you can get information about the cpu and carrots.

  When I check the same for vmware customers, I only get the info from the cpu. For License audit of needs and so on it would be useful that this info could be separated as follows:

  Get - VM | Select Name, NumvCPUs

  Does anyone have a suggestion?

  Pegasjus

  Try this

  Get-VM | Select Name,  @{N="CPU Sockets";E={$_.ExtensionData.Config.Hardware.NumCPU}},  @{N="Cores per Socket";E={$_.ExtensionData.Config.Hardware.NumCoresPerSocket}} 
  

• Ask about the limitation of the use of the adjustment of CPU and RAM essbase

  Hello Experts,
  
  Is there a setting that limits the high use of essbase application on the server CPU and RAM in Essbase? If so, what are they?
  
  Thanks in advance for your suggestions.
  
  Kind regards
  Sudhir
  
  Published by: 637223 on December 23, 2009 16:40

  Usually I wish I could put more resources behind Essbase, not less. Why would you do?

  Are you thinking of something like SQL Server Resource Governor?

  If you are in a virtual machine environment, high-level products VMWare don't allow guys IT fairly accurately the range up to a server/server farm and governed how much CPU/DASD Gets a virtual machine.

  Kind regards

  Cameron Lackpour

• How to get notifications on both devices at the same time, iphone and watch

  Are we able to get opinions on both devices at the same time?

  Yes, if they are connected using the same Apple-ID
  (1161)

• Is it possible to rotate the 2 versions of Firefox on a machine at the same time? and how?

  I run a workstation
  Lubuntu, 12.04
  I ask this because Firefox is unable to upload photos on ebay when new versions are available.
  This was true of the versions 22 and 23.
  So I manually set and use Firefox 21 because it works.

  You need to add the - No.-line switch remote control to start the (second) version of Firefox that you only want to use occasionally.
  
  The - No.-switch cache of the browser, so it cannot be detected and you can not open an external link in a browser has started this way, don't use only not this switch to start the default browser or profile.
  
  This switch work from the same version of Firefox with a separate profile and begin another version of Firefox with its own profile.
  
  Without this switch, the startup code Firefox detects that an instance of Firefox is already open end opens a new window in this forum, and you will not be able to start another version of Firefox.

• Satellite L10-104 - the upgrade of CPU and RAM

  Hello

  does anyone have a Toshiba Satellite L10-104 with more than 1 GB of RAM installed? I'm one of these laptops for upgrade and reinstall the operating system and other software. Toshiba says that it only supports 1 GB (2 x 512 MB) of RAM but Intel says techdocs this Notebpook (i855GM) chipset will support 2 GB RAM Max.

  The other question is, is the CPUupgradeable? The laptop has more no guarantee and I am an experienced user and I see no problem to install a new processor in a laptop.

  Thank you

  StefanV3

  Hello

  > someone at - it a Toshiba Satellite L10-104 with more than 1 GB of ram installed? I had one of the theses Npotebooks for upgrade and reinstall the operating system and other software.
  > Toshiba said that it supports only 1 GB (2 x 512 MB) ram Intel techdocs said that this Notebpook (i855GM) chipset will support max 2 GB of ram.

  According to the specifications of l 10:

  standard: 256 MB
  maximum extension: 1 024 MB
  technology: DDR RAM

  So, I don't think that it can support up to 2 Gb

  > So the other question is, is the scalable processor?

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=13

• Need help to modify the Script to find the number of vCPU and reservation of memory in VC

  Hello

  Need help to modify the script so that his can person report to the vc all focus level instead of each level of the Cluster.

  Thank you

  KR

  Try this instead:

  $vmsInfo = Get-VM
  #Creating array to place new object
  
  $reportdata = @()
  
  Foreach ($vm in $vmsInfo)
  {
  #Creating new object
  $vmInfo = "" | Select Name, CPUReservationMHz, MemoryReservationGB
  $vmInfo.Name = $vm.Name
  $vmInfo.CPUReservationMHz = $vm.ExtensionData.ResourceConfig.CpuAllocation.Reservation
  $vmInfo.MemoryReservationGB = $vm.ExtensionData.ResourceConfig.MemoryAllocation.Reservation / 1024;
  #Inserting data into new object.
  $reportdata += $vminfo
  }
  $reportdata
  

• AWR: Time CPU = 0, % of time Total DB &gt; 0

  Hello!
  
  I use * 10.2.0.5 *, AWR I see next statistical operation in one of my report:
  

  SQL ordered by Elapsed Time
  CPU Time   ... % Total DB Time
   0                            12.21

  Please explain, how is it possible
  DB-time does not time CPU here?
  
  Thank you and best regards,
  Pavel
  
  Published by: Pavel on April 18, 2012 04:17

  Hello

  for explanation of time CPU and DB, please visit http://savvinov.com/2012/04/06/awr-reports-interpreting-cpu-usage/.

  In your case, I think that the numbers is not reliable due to errors of instrumentation (for example, I saw 0 time processor in an extremely overloaded system).

  Best regards
  Nikolai