the clients VMware CPU and CPU cores

Similar Questions

• The host VMware workstation and multi-core CPU

  Apologies if this has already been answered, but all my research to turn questions about processors how can specify in a virtual machine. It's not what I'm after here.

  I want to know is the use of VMware workstation (v6 and v7) is available on a multi-core worksation host physical cores.

  I have a scenario where we have several virtual machines containing sensitive coding environments. The material that they are on is a little old and we don't have the time or the knowledge to recreate systems (a combination of Matlab, DSpace and some custom coding). Our only option (and we did it for a couple with success so far) is to create virtual machines of these workstations.

  Which is absolutely essential for us is the material we choose VMs on host. Virtual machines will use simple/double/processors virtual.

  In order to choose the correct hardware platform, I need to know if VMware workstation is running an instance of the virtual computer within a single processor (in this case is the reduced performace?), or if there are multithreaded and make the most of the hardware it will run on.

  (We are not welcome, never more 2 virtual machines at the same time)

  Any suggestions on material would be appreciated also. I think of something based around a core of Xeon 4-6 with 12-16 GB of RAM.

  Thank you very much

  Nick

  Correct, for laboratory/debugging and interaction VM Workstation is pretty good.

• possible to install the client tools OBIEE and OBIEE server in the same machine

  Hello
  
  possible to install the client tools OBIEE and OBIEE server in the same machine.
  
  Ex:
  
  Last week I've updated Patch BP1 in my local system, in the process, we got the update also oracle Client tool
  
  But in my Administration tool in the built-in tool automatically updated, we need to install the client tool in my system?
  
  My doubt:
  Please check this screenshot
  http://ScrnSht.com/sskbjb
  Please help me,
  
  Thank you

  You should not install client tools because they will be automatically installed w install the server. The 11g installation guide says "do not install client tools on the same computers that host your server instances Oracle Business Intelligence, client tools are already installed on these computers (as part of the installation of Oracle Business Intelligence)."

  so useful, mark it as good or useful.

• The Vcenter VMware Server and vmware work station do?

  The Vcenter VMware Server and vmware work station do?

  No, only the infrastructure products

• Certificate expired on a server that has only the client VMware and VMware workstation

  Our scanners detected security certificate expired vmware on a server. The only products currently running on this server are VMware workstation and the vSphere client. I looked in all the installed certificates and their lack of vmware. When I open a web browser and go to the IP address of servers using port 443 I get a message of invalid certificate and look a certificate it shows expired recently, and was published by VMware. Where can I find this certificate and what is used to indicated the products installed on this system?

  The certificate was for workstation server configurations (connection sharing VMs/Remote). Just disabled the sharing feature because it is not used.

  Find the certificate in the program data-file VMware. Could not find information on renewal, only how to replace it.

• Installation of the Client VMware Update Manager 6.0 not in the installation menu

  I played a bit with a VMware 6.0 default installation and everything has been installed. After I finished I could not find a way to configure the Update Manager. It was available in the webclient service, but still there is no way (AFAIK) to go to "Admin View" here.

  So I installed the client vSphere 6.0 via the menu autorun and worked well. I found a few screenshots to another installation of VUM and there was a separate button "VUM Client" installation in the automatic menu which I did not.

  After reviewing the DVD, I found the Setup file Z:\updateManager\VMware-UpdateManager.msi, after installing it the VUM Client is available.

  I used VMware-VIMSetup-all - 6.0.0 - 2562643.ISO as an installation source.

  It is normal to do it like that or if the option "VUM customer" is somehow forgotten in the automatic menu? I wonder if you guys probably noticed the same thing.

  Just a plug in c# if I not mistaken, just need him.  Believe me, c# is where you can actually get stuff done unless its something that is deliberately omitted in order to make this horrible thing

• Error connecting to the server by using the Client VMware vCenter

  When you attempt to connect to vCenter server using vSphere client, I get this message:

  "a general error has occurred: authorize the exception."

  However, if I log on the vCenter server locally and use a local Windows account in vSphere Client to connect to vCenter Server on the same computer - it works OK.

  There is obviously a problem with what happens when you use active directory to authenticate a user who connects with the VMware vCenter server client.

  Someone has seen this before or have any ideas?

  Thank you

  I had a similar problem on two different sites

  1. It was my firewall local windows on my Windows 7 desktop that it has prevented from work
  2. Another situation was DNS was not working properly and once I had a static entry, it worked

• scalable design vcs-e for the clients of MPLS and internet

  Hi all

  I think of an evolutionary design of VCS-highway in a service provider architecture.

  Some clients reach vcs-e across one MPLS network, another customer over the internet (each client with its own vcs - c).

  I have a vcs-e with dual NICs and nat enabled.

  VCS - e is a private network.

  In this architecture, if I nat vcs-e in one public ip address, I can't inject the public IP address in the VPN client (clients use the address private, and anyway, they will not receive a public IP, MPLS and the internet). And I can't inject a private Internet ip address. In addition, every customer wants to use an ip address of vcs - e compatible with their plan ip... then maybe customer wants to use an address of 172.31.x.y and a B client an IP address of 192.168.x.y.

  Best solution would be to nat vcs-e address in different ip address for each client / internet through the firewall, for example vcs-e 10.1.1.1 in 172.31.24.1 for the customer has, in 192.168.24.1 for client B and 80.x.y.z for the internet, according to the firewall context... but I'm not sure that I can do (I can? I think I can only the ip address of nat vcs-e statically 1 to 1).

  I am attaching a figure illustrating the design of the network.

  Any suggestion?

  Hello

  In your design, it is allowed to do NAT between VCS - C and VCS-E if you configure using links/box of course, which I think is what you plan to do. A nearby area will fail in this design.

  If your customer can have a VCS - C on their private network and that you connect to your VCS-E through a NAT firewall as you describe as the "best solution".  There is no need to NAT any return to the client IP address, since the VCS - C will make an outbound connection only for the VCS-E.

  Robert

• behavior of the api VMware SAN and NFS

  While working on the vmware api Reconfigure_task fact face a problem. A single montage, in the same scenario, he started the exception as

  incompatiable backup device 1 in the case of NFS, but in the case of SAN, it is throwing exception as a Configuration not valid for the '1' device.

  My question here is that if vmware SDK behaves differently in the case of SAN and NFS for the same api?

  Is there any document coming from where we can get more information on the different behavior and how to approach us differently through the c# application?

  Basically, the answer is no. VimSdk acts not differently for NFS for SAN.

  Of course, ReconfigureVM_Task can have constraints special som according to the storage used.

  Tos2k

• Problem with the mouse and the network after the upgrade VMware Tools and hardware to virtual machine

  Hello world...

  I just upgrade my ESX 3.5 servers to vSphere 4.1. All this work is very well with the upgrade right now.

  After that, I tried to mise a niveau of VMware Tools and hardware of VM for my virtual machine and the problems started.

  I tried with two different VM (the two Windows 2003) and the problem appears for the two VM.

  I don't want to test another VM of the different operating system now, I'm afraid to go too far with update of Pentecost the problem I have now.

  I tried two VM to be sure that the problem is not only on a virtual machine.

  First of all, the mouse.

  My mouse has jerky movement. The button works, but sometimes I have to click several times to select what I want.

  I tried to uninstall the mouse in Device Manager and reinstall, but not really Pentecost improvement which (buttons works better, but... not so sure).

  Second problem.

  After you restart the server after VMmware tools and hardware virtual machine, the network link not working anymore.

  When I go to my network card configuration, IP settings are reset in DHCP mode.

  If I go again all my IP settings, Windows says:

  The IP address is hidden from the network and Dial-up connections

  folder because it is not physically in the computer or is a riser

  It does not work. If the same address is assigned to both adapters and

  they become active, only one of them will use this address. This may result

  in the incorrect system configuration. You want to enter a different IP address

  address of this adapter in the list of IP addresses for this card in the list

  Advanced IP address in the dialog box

  If I answer Yes to this, I have to enter a new IP address, and of course, this is not what I want to do.

  If I don't answer, the network working again.

  I think it is a strange message but the work of the vSphere maybe network now.

  Anyone have any idea why my work network and mouse as this upgrade after.

  All other VM that is not upgraded so far works great.

  Thanks in advance...

  (1) make sure that your hardware acceleration is safe enough. I got the upgrade down my hardware acceleration several times already.

  (2) sounds like the new drivers for your NIC cards took over and VMware is basically a new card NETWORK for you. Follow these steps to disable it:

  (a) open a command prompt

  (b) type (without quotes): 'set devmgr_show_nonpresent_devices = 1' and press ENTER.

  (c) type (without the quotes): "start devmgmt.msc"

• How to configure the client VMware View 4 repurposed computers?

  I want to give my

  old computers to run View 4 client only. After that, it started, it will work

  View the customer in mode full screen and ask the user, like a normal computer for the user logon.

  Users should not make a difference while using the virtual office. How

  do this? I think that Citrix XenDesktop solutions, but I have to use

  VMware.

  Thank you

  If you look at this guide, it tells you how to set the customer view as a replacement shell to explore, so the only thing that the machine starts is the customer of the view. With the appropriate switch, you can have the user login and go directly to their office right.

  http://www.VMware.com/resources/TechResources/10023

  Hope this helps,

  Dan

• Termination of the client PIX VPN and Internet access from the same interface

  Hello

  VPN remote users connect to PIX (7.2) outside interface, but need to have these clients to access the Internet through the PIX outside interface as well. Need this because PIX IPs is registered and allowed access to some electronic libraries. One way would be to set up a proxy within the network and vpn users have access to the Internet through the proxy, but can it be done without proxy?

  Yes, public internet on a stick

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00805734ae.shtml

• Unable to launch the Client Application-vCO and strange error - "exception on Hibernate JDBC data access...". "

  Hello

  We have an integrated vCO 5.5.1 installation with vCAC 6.0.1. The installation worked very well. Recently, we encountered a problem where we were not able to run that any associated workflow vCAC. The following error is thrown " " "JDBC Hibernate data access exception: SQLException for SQL [?]; State SQL [null]; error code [0]; Cannot release the connection; "the nested exception is org.hibernate.exception.GenericJDBCException: cannot release the connection in vCO. Do not know what is happening with the vCO. Can someone help me on this? It's urgent!

  
  

  To resolve this problem, all plug-ins have been recharged and services were restarted. That has not helped.

  There is another issue that is to appear after that. We cannot launch the vCO Client. Fig. 1

  We are not able to access the following URL: https://<vCO-IP-Address>: 8281 Fig. 2

  We are able to access the configuration of the vCO page (https://<vCO-IP-Address>: 8283) and the application of the vCO page (https://<vCO-IP-Address>: 5480)

  Your help would be appreciated. Thank you.

  -SK

  Not many details have been given to us. I just resolution. In the Configuration of the vCO page, under the network tab fair value 0.0.0.0 IP address and restart the Server Configurator vCO. Login back to the Configuration of the vCO page and restart the service. It worked like a charm! It is the resolution for the vCO is not opening in port 8281. Once this is done, even the vCO Client began to open.

  Come to the JDBC error, as soon as this problem has been resolved, did not appear the JDBC error. So, I'm not sure about the exact resolution for this.

  -SK

• Client VMWare Horizon on El Capitan

  MacBook Pro 15 ", mid-2015, retina 2.2 GHz Intel Core i7, 16 GB RAM, 256 GB SSD

  OS X Version of El Capitan 10.11.2

  I use the Client VMWare Horizon (version 3.5.2) to connect to business desktops VDI.  I have a number of questions.

  -VDI desktop consumes all connected screens, either 1, 2 or 3 screens.  I find no way to assign the VDI Office to a single workspace or monitor.  I use the Macbook screen, a connected HDMI monitor and a connected via a bolt of lightning to the DVI adapter.

  -The customer seems to disconnect when the Macbook goes to sleep.  But it is not always log out properly.  More than once I have been unable to restart the desktop computer without the intervention of my sys admin

  Finally, and this isn't a VDI issue per se, when I connect my Macbook to the company via Ethernet or wireless network, I'm just flat impossible to print only printers on the network of the company.  The Mac is not joined to the domain, is unable to see all printers, and I roll the printer add by hand.  I am able to define a printer by IP address or FULL domain name, but all attempts always results in the printer print code Postscript and not the print job.  This is the enterprise-class printers Ricoh.

  Any help would be appreciated in any of these questions.  Thank you.

  I found the New Horizon customers are less than optimal.  I returned back all the way to the customer display, as a preference, because it seems to stay connected more, better and with less issues, plus the customer of the Horizon. Currently using the client to view v1.6... Fortunately.

  Printers - I put all my users up on top of the basic intellectual property. Very few questions.  Users/Macs are members of a domain and are associated with the hard cable, but do not use the MS Print servers. In one or two cases, I used Hello for some high-end HP or printers Ricoh.

• Why the client cannot receive the matrix on TCP?

  I have a server (PC.vi) and the client (xbee.vi) and have implemented a simple TCP connection.

  The server (PC) sends a flattened array of doubles to the customer (xbee).  When the client tries to to unflatten it and print the values, they are different from what the server sends.

  I am not able to understand why.

  I have attached two files (and 1 dependency file: createsetuppacket.vi).

  You must provide the type of actual data for the input type.  If you need to wire a table 1 d of doubles to Unflatten chain.