the mapped drives whenever I stop wasting

Similar Questions

• The mapped drives disappear after logoff or restart.

  I can not get a mapped drive to stay mapped after a logoff in Windows 7.  If I map the drive by right clicking post work or the command prompt (net use f: \\sharename / persistent: Yes), once the user disconnects or restarts, the players disappear.

  This occurs only for Windows 7 users.  We have no problem with users under XP.  Someone has an idea?  I tried to connect with different user names, disabling firewall of 3rd party client, disable UAC, etc..

  Hi CSholmire,

  Please let us know your concern.

  I suggest you the methods below. Try these and find the question after each method:

  Method 1:

  1. Open a command prompt as the user that readers are not remembered. Do not use the option "Run as Administrator". In this case, we are unwilling to do this. At the command prompt, type: net use
  2. Does say something like this: use C:\>net. New connections will not remember.
  3. If it is said that they "don't remember", then you need to change this. Type: use net p:yes

  That change the setting of the system for the user to perform the workouts be remembered all the time and the will is the default action.

  If the above is not the case, then map the drive through the command prompt and see if the mapping is known.

  NET use p:yes

  NET use r: \\servername\sharename

  You can change the drive letter a: above to any letter free as you like. However, remember that if you use a letter that is too close to the beginning of the alphabet you can overlap with the USB devices and then one or the other will be absent. You can replace the r: with * and it will start with the next free drive letter starting at the bottom of the alphabet. This should make the reader remember through log and restart.

  Method 2:

  The long-term solution is a registry editing that would get the mapped drives visible to standard and administrative sessions.

  1. Press Windows + R and type: regedit
  2. In Regedit, navigate to HKLM/SOFTWARE/Microsoft / / Windows //Current Version / / policies / / system.
  3. Create a new REG_DWORD entry named "EnableLinkedConnections".
  4. Set the value to 1.
  5. Restart after you add the registry entry and the programs will be able to see the drives mapped forever.

  Note: This section, method, or task contains steps that tells you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.Microsoft.com/kb/322756/fr/ )

  How to back up and restore the registry in Windows

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Look at the maps app will not stop

  When I look for direction in the maps on the watch application, it will not stop after that. I looked for directions to the airport, and then it does not cancel and kept taking me to the airport. I have ensured the application Maps on my phone was not working and he cancelled it but always watch will not stop.

  I tried it yesterday and now today the watch gives me directions to the airport.

  I tried to remove it from the docking, restarted my watch. Watch app from the phone Checked, but nothing works.

  Hello

  To stop your watch directions: open the Maps app on your watch > firmly press the display > press on for policy decisions.

• connected through the mapped drive, NOT ReadyCloud

  Very strange, I am able to do my mapped drives fine, so I know connectivity is ok.

  I'm not able to see my SIN in the ReadCloud.Netgear.com or in the desktop application.

  I disabled my firewall. I can't think of anything to try. Any suggestions please?

  Thank you

  Steve

  Hi khawla62,

  Can you confirm if you have added both the Public Google DNS (8.8.8.8) and your IP router as DNS servers on eth0? In addition, disable IPv6.

  Kind regards

  BrianL
  NETGEAR community team

• MYBook Live - cannot create the mapped drive

  AC1200 WiFi Range Extender

  Through the main router, or through the other router stretching I can install and access the shares of my WD MyBook Live. However, throug the Extender I can't. HOWEVER I can see the WD drive in the list of network and can be accessed via the WD software, specific issues with the Extender and mapped drives.

  Everyone has ideas or have I spent a load of money a piece of junk?

  More investigation has shown that a Bullguard update is the problem. Manually disable the firewall of BG, mapping IP-based disks / share and back - light BG seems to have fixed... I have

• TS4.1 WinXP SP3, IDE slow response * only * if the mapped drive open in teststand... file?

  I have a strange situation here. First of all, I must describe the system:

  • 2 machines both with TS4.1 IDEs installed Win XP SP3,
  
  
  • Machine 1 has logical file of common sequence, which is shared with the two machines via a drive mapped "T": sequence files are in 'T:\Logic '.
  
  
  • Both machines have paths of research with the root t: as the last path in the search list.

  Mounting on machine 1 is fine - seq files can be opened in teststand, sailed around, etc. without any problems.

  However, on machine 2, the IDE behaves normally ONLY if you drag the following files to change or double-click to edit. As soon as you open a movie file using the open a TestStand sequence file dialog box, click anywhere on the IDE creates a large volume of network traffic and the IDE "hangs" for a few seconds (I've seen as long as 5) and is completely insensitive (there is a direct correlation between the 'pic' termination of network traffic and the TS IDE becomes sensitive).

  I did a netstat - ano queries and I don't see new ports opened upwards, so all this is paid by the regular windows file sharing link. If I open directly from the w: drive, it is also the...

  -This problem is not continuous: he has been fine for several weeks and came back yesterday. I was lucky enough to find the "do not open any files from within teststand" workaround and continue working normally.

  If you have opened a file in the application, then you exit TS and restart it and all is well again.

  Any ideas? It is UNBELIEVABLY BORING.

  This is probably the problem. Subdirs, especially on a network drive to the research should generally be avoided.

  I would recommend against using the options "search subdirectories", even in the case not connected to the network, since then, not only can it lead to performance problems, it can make unintentionally using the incorrect module because the module where you want to say, if you come to specify the name of the file and rely on the recursive search could be ambiguous and have several possible matches. It is best to use a fixed search with a partial if possible relative path directory. For example, if your search directory is c:\mc-tas and you want to refer to a module in GIP\LLB, you can simply specify GIP\LLB\Mymodule.llb for the path in your steps and you would then not need to c:\mc-tas a recursively searched subdir.

  Hope this helps,

  -Doug

• host of the print driver for applications stopped working 5100cn

  I don't know if my previous attempt at this post went through...

  I've recently upgraded to an SSD and a new installation of won 8.1 (exactly the same thing I had on my old HDD) and now when I try to print from my Dell 5100cn I get the following error:

  Host of the print driver for applications has stopped working

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: splwow64.exe

  Application version: 6.3.9600.17480

  Application timestamp: 545871c 1

  Fault Module name: dlpsc51r.dll

  Fault Module Version: 0.3.1281.4200

  Fault Module Timestamp: 4324d 269

  Exception code: c0000005

  Exception offset: 000000000000cd 87

  OS version: 6.3.9600.2.0.0.768.101

  Locale ID: 1033

  Information additional 1: 1 has 72

  More information 2: 1a7236b9868d6b38d3fd37b43ff05b06

  Information additional 3: 269 b

  Additional information 4: 269b7fc9d660b4191041ae78f0745b83

  For the life of me I can't figure out what I'm doing wrong... The printer still works fine if I swap back to my old HDD so I know its something I do (or not do)... I tried to figure this out all day and have installed several drivers in normal mode and compatibility without result.

  When I open devices and printers on the old drive HARD the printer name reads "Dell Laser Printer 5100cn PCL6" but when I check the devices and printers on my new SSD it reads "Dell Printer 5100cn PS"... So, I know that I do not want to install the same as I have done before and I can't understand what I installed... I use a Toshiba Satillite P75 A7200 if that matters...

  Help, please

  Hi Roydub83,

  Thanks for writing on the Dell Community Forum.

  Please uninstall all the printer driver on the system installed for Dell Laser 5100cn printer and then install the driver on Windows 8 using this link http://dell.to/1ETptNA. Install in compatibility mode if the installation does not engage.

  Answer please if you have any other questions.

  Have a nice day ahead.

• RMAN cannot write to the mapped drive

  Hello

  8.1.7 on Win 2003 my rman script is:

  BACKUP

  ADDITIONAL = 0

  FORMAT 'F:\BACKUP\RMAN\FULL\bk_u%u_s%s_p%p_t%t '.

  FILESPERSET 6

  SETSIZE 29000000

  DATABASE;

  F is a mapped drive.

  But RMAN fails with:

  RMAN-10035: exception raised in RPC: ORA-19504: could not create the file "" F:\BACKUP\RMAN\FULL\bk_uhios0hpc_s270898_p1_t834684716. "

  ORA-27040: skgfrcre: error, unable to create the file

  04002 - OSD: could not open the file

  S/O-error: (OS 3) the system cannot find the path specified.

  In the command line when I derived:

  dir F:\BACKUP\RMAN\FULL

  It is ok.

  Thanks for the help.

  Hello

  Thanks DavidAW.

  Sorry I was on another site with other tasks.

  Here is the error of the battery:

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03007: renewable error occurred during the execution of the command: backup

  RMAN-07004: unhandled exception during execution of the order on channel ch00

  RMAN-10035: exception raised in RPC: ORA-19504: cannot create the file '\\SERVER\BACKUP\\RMAN\FULL\MYDB\bk_uh6os0eg9_s270886_p1_t834681353 '.

  ORA-27040: skgfrcre: error, unable to create the file

  OSD-04001: invalid logical block size (BONE 512)

  RMAN-10031: ORA-19624 has occurred during the call to DBMS_BACKUP_RESTORE. BACKUPPIECECREATE

  Complete recovery manager.

  I can do:

  NET use yourpassword \\fileshare\sharename / user: domain\username

  and to create any file.

  Kind regards.

• 4.0EA3: cannot access the mapped drives (Windows) in the file browser dialog boxes

  All windows files Explorer allows access to local (hard drive) C: and D: (DVD) drives. It is not possible nor access readers mapped (that refer to our server of UNC file paths) - i.e. the network drives.

  I tried the following access to the file Explorer:

  File-> open: does not work

  File Data-> shape-> open: does not work

  Tools-> Preferences-> environment-> Logs-> Browse-> Log Directory: does not work

  It worked / works great in SqlDev 3.2.2

  I tried to dismiss the problems of connection and authentication to our SAN (network drives are fully accessible from Windows Explorer and same 11.1.2.2.0 JDeveloper) - I created a drive mapping on my hard drive. Can't see this mapping within the SqlDev either

  Problem on Win7 64-bit

  Looking forward to feedback from the Oracle, or to see if other users to find the same question

  Alan

  I checked this in the Production version (build 13.80) and my drive letters are back!

  Yay!

• Documents showing to the mapped drive, but not redirected Library Documents W7

  Hi all

  We have a school system that has a n: that is our network home folder.

  The Documents Windows 7 library is also redirected to our folder.

  If we look on the home network via the N: drive we see documents, however if one looks at libraries, not all documents appear.

  Any ideas?

  Concerning

  Graham Jones

  Systems and Network Manager

  Pool Hayes Arts & Community School

  Hi Graham,

  The first thing you want to do is set up the sharing options on the drive or folder you want to share. This requires you to be on the computer that hosts the drive or folder.

  If the administrator of the computer had followed the steps mentioned here, you would have access to the library files:

  1. Click on the "Windows Explorer" icon in the lower left corner of the Windows taskbar to open the Windows Explorer file browser.
  2. Navigate to the folder to be shared.
  3. Right-click on the folder to share and select "sharingwith... »
  4. Click on the option of 'some people' in the context menu. Theshare with users'interface opens.
  5. Type a user name, or click on the arrow pointing down to the list of users.
  6. Select each user access to the folder or click on the "everyone" option. Each added user appears in the list of "users". Click on the button 'Add '.
  7. Click on the arrow pointing down next to each user and select the level of permissions for this user. The options are ' read/write,""read-only ' and 'Delete'.
  8. Click on the 'Share' button. The folder is now shared with the users specified through the home network. A confirmation window appears.
  9. Click on the button 'fact' to close the 'sharing ' window.

  Please let us know the result. If the problem is still not resolved, we will be happy to help you further.

• Cannot access the mapped drive frrom command prompt

  I have two network drives mapped on my Windows 7 Professional machine.  A disc goes to anothetr computer on my network and the other goes to a share through a VPN

  I can see the two and do actions from the Explorer (they still call it that?)

  but when I try to access it from a command prompt or the drive letter, I can use it system cannot find the drive specified... huh?

  Reset you the Protocol TCP/IP - Fixit

  http://support.Microsoft.com/kb/299357

  Command prompt window opened with elevated privileges and type

  IPCONFIG/flushdns

  Press enter

  Reset the default Host file

  FixIt - How can I reset the default Hosts file?

  http://support.Microsoft.com/kb/972034

• lost the mapped drive

  Our office has a small working group, while using Windows 7.  To keep all our data files on one of the three (as a server).  My computer is mapped to the drive and I can see the 'server' in my view of the network, but he does not see the drive on this computer that we keep all data on.  My partner has exactly the same computer as mine, and she does not have this problem.

  Thank you very much for the input.  I worked last night with a MSFT engineer and we discovered that there was a conflict of IP address 192.168.x.101 has be confused for some reason any with 192.168.X.100.  When we handed the dynamic IP address on the other computer on the network to a static address192.168.X.120.

  So far so good.

• The mapped drives disappear on win7 pro machines

  Salvation;

  I'm having a strange problem. Running a domain on our network. Can I map network drives on our XP machines very well. Our two machines w Win7 Pro SP1 they will map, but the restart or logout and reconsignation on, the card reader disappears and yes the box is checked to reconnect.

  I've seen dozens of messages with the same problem but I have not seen anyone who shows a solution.

  Thank you

  Steve

  Hello

  I suggest you to report the issue in The Forums Pro TechNet Windows 7 IT: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  Thank you.

• You can use local drive as the mapped drives raw groups

  We have a new host with vShere4U1 installed on a couple of mirrored disks.  The host will initially run a SQL server and the operating system will be SAN (fibre) as all of our other machines are virtual host.  We do not have enough space on the SAN or the budget to upgrade to allow us to run the newspapers/Db SQL, then the host was purchased with an extra 14 discs (much less expensive) who were divided into two disk RAID groups 1 + 0 (410Gb & Go 540)

  I can attach disks locak to the host, but it is shaped as a vmfs and the dbo wants to use these discs as raw as he wants to use the size of the set and is limited to 256GB VMDK in the vmfs.

  Is there a way to present records in vSphere while they give me the opportunity to fix to the virtual machine as raw disks similar to the san, or in any other way.

  I'm a pretty confident user of ESX without being an expert (admin typical average closed sys - too many hats) and basic linux would be appreciate some comments/help.

  Home - HP DL160 G6

  See you soon

  If you remove the data store and then choose a block size, you can have a data store up to 2 TB in a single LUN. If you need you can extend the data to 62 to using extensions store.

  You really want to use raw disks. I don't know if it is possible anyway.

• Writing to the mapped network drive stops intermittently

  I have a professional machine of windows 7 which has a mapped network drive and a python program that writes on the mapped drive. Occasionally, she stops writing on the part. The only thing I noticed is that the computer browser service keeps stopping and starting. Any help much appreciated.

  I modified the registry to disable smb master browser to stop the election of browser:

  HKLM\System\CurrentControlSet\Services\Browser\Parameters\MaintainServerList
  

  I've used this same python program on the same machine with an installation of centos without any problem.

  The drive mapped to a smb network share on a linux server.

  Hello

  Thanks for posting the question in the Microsoft Community forums.

  I would recommend posting your query in the TechNet Forums. The community of IT professionals in the following TechNet forum will be able to help you the best.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  If you encounter problems with Windows, feel free to post you question in the forum.