The Migration-related questions

Similar Questions

• The question of the compatibility of the game-related questions

  Respected Sir/Madam,

  I am Naveen Saha of Gujarat, in India. I have a laptop HP envy-6 1003tx sleekbook. I installed windows 8 Professional on my laptop. I have a game GTA 4 I want to install and play on my laptop and the forum of windows it is shown that this game is compatible with windows 8, but the game shows that your system is not compatible during the installation. Requirements minimum for the game is graphics card 512 MB, 1 GB of ram and 16 GB of hard drive space and all that is in my laptop but it has a compatibility problem with windows 8. How to start the game on my laptop or make it compatible with windows 8, please help and answer me soon.

  Thank you

  Naveen Saha

  Hello NAVEENENVY.

  I found a YouTube video that covers installing the game on Windows 8 by using the compatibility and disk mode.  Here is the link.  This is the method you tried to install the game using the styling?  If Yes, what is the error you receive?  If this isn't what you tried, let me know the result.

  I'll keep an eye out for your answer.  I wish you a nice day!

• With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  Opening was a pro the Pro amateur-oriented or serious app, usually shooting Raw, probably on a digital SLR.

  If that's you then pictures will miss a lot for you.

  If this isn't the case, then opening was probably overkill for your needs.

  If you like the pictures then this is the way to go.

• AT300 - battery / load the related question

  Hi all

  May I ask your help with a battery / load the related question

  I used my AT300 a few weeks back and I forgot to turn if off battery voltage flat then, so the next day, plugged the charger, but the loading icon does not appear on the screen.

  Sort left connected to work, but after 8 hours always toll-free, I'll start when plugged into the charger but dies as soon as it s disconnected.

  I thought that I may have killed the battery I found some people saying that if they are allowed to carry out completely so that they will not return to the top.

  So has his hand on another battery but same thing, the guy then a charged battery for me and I got him and started toward the top of a stack, but there is a red exclamation mark on the battery icon and the unit will still not take a charge

  If I plug the charger in the icon changes to show that there main power, if I look at the setting and go to the battery it says 0% unknown battery

  So I am at a loss and hope that some of you may have encountered this and have an idea how to solve this problem

  Thank you very much

  Hmm kinda sounds like some hardware issue about...
  To be honest, this is the first time that someone has reported these problems here in the forum.

  But have you ever tried to reset the default Tablet?
  Press and hold the power button / stop and the volume up button.
  Now the recovery menu appears providing different option. One of the option should allow you to reset the tablet.
  To navigate between options, use the volume up/down button.

  I hope that affecting the default tablet would help you to fix it otherwise, it seems to be hardware related issue.

• a few questions about the migration of content/web content

  Hi all
  
  
  I have a few questions about the migration of the website and content (from development to test) which are not specified after reading the oracle documentation.
  
  -> When we make the site replication will be migrated content (data files).
  
  -> when we move will contained all the ED and RD etc (any object type web site migrated).
  
  --> are the two the necessary step for migration when we migrate web site.
  
  
  Thank you
  
  -Yves

  --> When we make the site replication of the content will be migrated (data files).

  It depends on how you do it. The tool 'Site Studio Replicator' won't move any content, only the structure of the site. The 'Manage replication Site' page can be used to migrate content with the structure of the site but I do not recommend for large sites, I use separate tasks to archive to move the content. "Backup and restore" page stores the entire site in a ZIP file, not advisable for large sites.

  --> When migrate us content will be all ED and RD etc (any object type web site migrated).

  Yes. It uses the metadata xWebsites field to identify the elements that belong to the site.

  --> are the two the necessary step for migration when we migrate web site.

  Depends on how you do it, but yes, all bits are needed.

• question: How can I open CS5.5 after the migration to the new computer laptop w / Mac OS 10.8.4?

  question: How can I open CS5.5 after the migration to the new computer laptop w / Mac OS 10.8.4? I got a dialog box indicating that I had to run Java SE runtime (or something to that effect), when I approved it, then try opening cs5.5 Indesign, the program closed unexpectedly at startup. If I uninstall program & reinstall, my documents will be free, or are they toast? Help!

  Hi rabbit Art,.

  Migration from one machine to the other problem most of the time. So I recommend you to reinstall the software. Concern is that none of your documents will be made.

  Kind regards

  Romit Sinha

• Swing Migration SBS 2003 to SBS 2008, media-related questions

  -We are migrating swing of old material sbs2003 Proliant ML110 hardware new sbs2008 Proliant ML350G6.

  - http://www.sbsmigration.com/

  -To perform the swing a third temporary server pc is required loads with Windows Server 2003 from SBS2003 and exchange Server 2003 media component

  -The temporary pc in our case is a dell optiplex 745

  -The problem is that the original SBS 2003 media is HP brand and that it will not install on the Dell server.

  -Work around was to use a trial version of Windows Server 2003 that boats on the Dell, but this version will not allow the installation of Exchange Server 2003 to the SBS 2003 Media Disc 2.

  -J' contacted Microsoft for an evaluation version of Exchange 2003, but it is now discontinued.

  -Another work around to order a NO brand Media Kit of Small Business SERVER 2003, but Microsoft will not provide because my original media is OEM.

  -Another book is about finding a Proliant ML110 of second hand. It's expensive and not an option, considering how much this project has cost so far.

  At this point, I'm stuck in the migration process, suggestions would be greatly appreciated.

  Hello

  That your computer is under domain, you must contact the TechNet forum, where we have of the support technicians who are well equipped with the knowledge on the issues of domain, do visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

• Question so that the migration of the VM using the vSphere API

  Hello

  I am having some problems during the migration of a virtual machine using vSphere SDK.

  I have install the vSphere environment as there are two hosts esxi installed on different physical machines with multiple virtual machines above them.

  Now I want to migrate one say the virtual macines VM1 fron host1 to host2. I did it via vCenter uses the vSphere client and it worked fine. Now, I have to perform the same task using the vSphere API. For this I use the template of "VMotion" located in the com/vmware/vm directory. I run the command as follows:

  targethost $ run.bat url username password, shows targetpool

  I'm not sure of the targetpool argument and I need advice on what I need to specify a name of pool of resources here. Acorrding to:

  http://www.VMware.com/support/developer/VC-SDK/visdk400pubs/ReferenceGuide/Vim.virtualmachine.html#migrate

  If the pool parameter remains disabled, current pool of the virtual machine is used as target the pool. I tried specifying the pool of resources such as:

  [- targetpool]

  but it gives the error:

  Error: List of resources target not found.

  Looking forward to all the advice. Thank you.

  Even if you do not have resource pools, it is actually a 'root' list of resources"which will be still exists. Try to specify 'Resources' as the name of the targetpool and allow you to migrate your VM.

• BUGS: Pre calendar treats Saturday 1st title of 2nd Saturday, brings also 3rd Saturday as BYMONTHDAY = 21 (but the migration is apparently not)

  After having closed the thread of questions related to migration of DTA, I discovered a new failure in the Pre calendar application.  It's using DTA 1.1 and WebOS 1.1, only syncing my Palm profile.  The next of VCALENDAR record is in my migration.mig file (I changed the incorrect initial INTERVAL 1 interval = 12 =):

  BEGIN:VCALENDARVERSION:2.0PRODID:Nova-MigrationBEGIN:VEVENTUID:818CATEGORIES:UnfiledCLASS:PUBLICSUMMARY:Woodward Dream CruiseDTSTART:20040821BEGIN:VALARMACTION:DISPLAYTRIGGER:-PT7200MDESCRIPTION:Woodward Dream CruiseEND:VALARMRRULE:FREQ=MONTHLY;INTERVAL=12;BYDAY=3SAEND:VEVENTEND:VCALENDAR
  

  In this case, the initial event occurs on 21/08/2004, which is the 3rd Saturday in August.  Note that August 2004 starts on a Sunday, which I think is German for this particular failure.  This means that Saturday, August 7 is the 1st Saturday in August, not the 2nd.

  The migration process initially placed the repetitive event on the thing to the day in 2009, namely, Saturday, August 15, which is the 3rd Saturday.

  However, I don't have a five-day-advance alarm today (Monday, 10 August 2009) on my pre (but I had one on my Treo 700 p, which has all my old data calendar loaded on him), so I went to the event on Saturday, 15 August 2009 (where the migration process had placed) and opened it to inspect it.

  First of all, I noticed that there are a set of alarm for five days in advance, so I opened the property repeat monthly custom and found that it was set to 'Every month on the 21st [sic]', 'Every 12 months', ' repeat until that Forever. "  It was clearly wrong and does not match the date at which the migration process had placed the event for 2009 (Saturday, August 15, the 3rd Saturday in August 2009).

  Even stranger, when I slipped back monthly custom property page repeat (why is there not a Cancel option to get out of these pages without modification?) he must have accepted the 'change' of ' monthly on 21st [translation] "because the event disappeared from where the migration process had placed (August 15, 2009), and it showed on August 21, 2009 , instead.

  At this point, I thought that I could access the event initial (21 August 2004) and change the 'monthly on 21st [sic]""monthly on the 3rd Saturday.  That's when I discovered the 2nd (probably related) bug: were the only options available in the event of 'head ':

  "Daily".

  "Weekly".

  "Every month on the 21st [sic]" (enabled)

  'Every month on the 4th Saturday' (!)

  "Each year the [translation] 21 August [sic]" (geez, it would be really hard to be grammatically correct, you think?)

  So, I reached a dead end.  Saturday, August 21, 2004 is clearly not the 4th Saturday, but apparently the Pre calendar program does not know that (again)!

  In summary, I documented two bugs:

  (1) the "RRULE:FREQ = MONTHLY; RANGE = 12; BYDAY = 3SA"clause contained in the migration.mig file has been munged (it's a term of scientific programming)"every month on the 21st [sic]. "  I don't know if this has been done by the migration process, but it seems unlikely, because the migration process apparently placed the original recurring events on the appropriate dates.  Only after opening one of these events and inspect the property to repeat monthly custom (and getting caught by the Pre Calenar 'feature' of not being able to leave inspecting the property without modifications) made the event move to 21 of every August, as indicated by the property of repeat incorrect on the monthly of custom.

  (2) for an event that starts on Saturday, where the month starts on a Sunday, the timing of the front (but apparently not the migration process) is a 'one stop' error and suppose Saturday, March 1st (7) is the 2nd Saturday, and so on.  In the particular case of August 2004, Saturday will eventually be numbered 2 to 5.  I don't know if this is repeated with other days of the week, or what might happen if a particular month ends with the 2nd to 6th (!) a few days of the week to manage.

  Anachronistic, PDAGuy, can we bring this to the attention of the Palm development team, please?

  Thank you.

  After the upgrade to WebOS 1.20, these issues seem to be resolved.  I could go to the entrance of the 'head' and correctly choose the 3rd Saturday in August, every 12 months, and it now appears the correct days in the following years.

• Planning the migration

  Hello
  
  We plan to make the migration for the purposes of planning version 11.1.1.1.3. My question is how many ways we can do planning of migration, and what is the best way?
  
  Thanks in advance.

  LCM will migrate all objects for example web forms, lists etc, it will migrate essbase objects but not data prior to version 11.1.2
  If you use this method, you don't have to copy the relational database of planning applications.

  If you use the method of copy of database relationship as it takes all the planning through application at once, there is no side essbase.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Can I get the contacts and email from an old record without using the Migration Wizard?

  Can I recover Contacts and messaging of an old record without using the Migration Wizard? Disc of the user in question has been very corrupted with several programs having a weird behavior. Migration wizard migrated corrupt files, so, even a clean install with only migrated users gave rise to an unusable installation.

  I have now all own installed now, but need old email files and contacts. How can I transfer this information a copy of the old/bad drive and only this info?

  Yes. With the old drive mounted and available, open Mail and choose import mailboxes... from the file menu of mail. In the dialog box import data from , choose Apple Mail.

  Navigate to the Mail folder to the user of the old library drive. According to the version of courier used, you might see folders named V2 and / or V3. Choose the applicable folder, and then click Choose.

• Doubts about the migration parallel to Lync 2013-> Skype4B 2015 on VCS - C (not clustered)

  Hello everyone!

  As I saw on Cisco documents, applying "B2BUA/Microsoft Interoperability" on VCS can "communicate" with just an instance Microsoft Lync pool servers, but we need to migrate the Lync server on parallel to the servers of Skype, we need to have a few "maintenance window" to migrate all users!

  Can we keep 'UP' communication for VCS (lync and Skype) pool of two servers until the end of the migration? The lync Server legacy 2013 (shared resources) with VCS today can communicate with users (migrated) for 2015 of Skype with trunk Lync existing TLS today?

  I think we generate another certificate for TLS and affecting some Skype server on the option "host approved", that's okay, I forgot something? Or I have other ways to communicate two pools Microsoft server with a VCS - C with the application "B2BUA/Microsoft Interoperability?

  Thanks for help me!

  To see some possible examples of deployment options, refer to Appendix 3 of the infrastructure Microsoft (X8.8) Deployment Guide and totalled, suggest that you also look over the guide in full as it might answer some of your questions about what is supported.

• TMS directory failed in the endpoints of series C after the migration of the device to the virtual computer

  Hi all

  We have migrated the 12.8 TMS from the device to the TMS 13.0 on the VM platform. There is no matching TMSPE and mainly used for management and directory service.

  Once the migration is complete on the platform of the VM, we found that endpoint C-series could not receive phonebook of TMS (while 95 MXP endpoints works very well with the TMS directory).

  The end point of series C, we check the Configuration-> directory server 1: URL. The link is converted from http:// /tms/public/external/phonebook/phonebookservice.asmx http:// tms/public/external/phonebook/phonebookservice.asmx.

  (In addition, we check the authorization of the two phone book page, and there is no IIS issue).

  In the 95 MXP endpoint, it can receive the telephone directory unit VM MSD and MSD.

  Best regards

  Ben

  Hi Ben,

  As confirmed by the curl command - you don't have access to the web page as an anonymous user.  You have to fix your permissions.  One of the fastest ways to do would be to try to reinstall the MSDS on the server again - this should reconfigure the IIS settings required for TMS.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• We can share with the Community (related to oracle) document which can be useful for someone... ?

  Dear all,

  We can share with the Community (related to oracle) document which can be useful for someone... ? Is there a specific place, so that it... where, once that we download... our document is checked and published if it is deemed sufficiently credible... ?

  Thank you and best regards,

  Séverine Suresh

  Question has now moved to the space of the feedback from the community.

  The community provides for the possibility for members to upload documents to the content-> spaces of Documents in the workspace of each product (if available).  However, the feature is currently disabled for most members due to problems with spam, so only a few members (most of Oracle employees) have the necessary permissions to do this.

  The admin studying how they can implement something that would allow members to upload documents, etc., which also has some mechanism to prevent spam.

  There is an idea already created for this: allow users to create community Documents

  for the Admin provided details on their current attitude

• The migration of all the ebs installation 12.1.3 fresh installed ebs 12.1.3

  Hello world

  12.1.3 EBS was installed on Linux rhel 5 1 year ago. and after 1 year with many configurations and customization.

  
  EBS showing a lot of issues and requirement is to install 12.1.3 EBS fees and move all previous data EBS & configuration to the freshly installed.

  As it seems that EBS 12.1.3 has not been installed properly, which led to many questions issues.my.

  
  (1) is it possible to install 12.1.3 EBS fees and then move the configuration and data prior to this.
  is this advisable?

  
  If Yes?  How? Kindly give me a detail orientation

  (2) how to do a checkup currently installed EBS 12.1.3.

  I mean if I can show them that there is nothing wrong with the installation. Then we need to think about alternatives.

  What about the issues? they are functional configuration number? or the issue of customization?
  If so why would you move only those configuration when you already have questions about...

  Yes, you can migrate

  For the migration of application level, see:

  Migrating applications platform with Oracle E-Business Suite Release 12 (Doc ID 438086.1)

  R11i / R12: Oracle E-Business Suite upgrades and Platform Migration (https://support.oracle.com/rs?type=doc&id=1377213.1%29Doc ID 1377213.1)

  For installation

  https://blogs.Oracle.com/stevenChan/entry/ten_ways_of_using_isetup_to_st

  For database migration, see:

  Process of 12.0 and 12.1 using 11 GR 1 material or 11 GR 2 import/export (Doc ID 741818.1)

  Using Transportable Tablespaces for EBS Version 12.0 or 12.1 using Database 11 GR 2 (Doc ID 1311487.1)

  TO check the cross installtion

  How to locate the log files and troubleshoot a quick installation for immediate release 12.0.x and 12.1.x (Doc ID 452120.1)

  ApPsMaStI

  sharing is caring