Swing Migration SBS 2003 to SBS 2008, media-related questions
-We are migrating swing of old material sbs2003 Proliant ML110 hardware new sbs2008 Proliant ML350G6.
- http://www.sbsmigration.com/
-To perform the swing a third temporary server pc is required loads with Windows Server 2003 from SBS2003 and exchange Server 2003 media component
-The temporary pc in our case is a dell optiplex 745
-The problem is that the original SBS 2003 media is HP brand and that it will not install on the Dell server.
-Work around was to use a trial version of Windows Server 2003 that boats on the Dell, but this version will not allow the installation of Exchange Server 2003 to the SBS 2003 Media Disc 2.
-J' contacted Microsoft for an evaluation version of Exchange 2003, but it is now discontinued.
-Another work around to order a NO brand Media Kit of Small Business SERVER 2003, but Microsoft will not provide because my original media is OEM.
-Another book is about finding a Proliant ML110 of second hand. It's expensive and not an option, considering how much this project has cost so far.
At this point, I'm stuck in the migration process, suggestions would be greatly appreciated.
Hello
That your computer is under domain, you must contact the TechNet forum, where we have of the support technicians who are well equipped with the knowledge on the issues of domain, do visit the link provided below.
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
Tags: Windows
Similar Questions
-
Error during migration of 2003 standard to 2008 standard on the server.
Original title: GIVE ME THE SOLUTION
Dear Sir
Actually am facing this type of migration of onece 2003 standard error to 2008 standard server.
Kindly give me suggestion
Adprep cannot run on this platform because it is not an Active Directory domain controller.
[Status/consequence]
Adprep has stopped without making changes.
[User action]
On an Active Directory domain controller, run Adprep.Thank you & best regards
K. Raj Kleo
Hello
The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you
http://TechNet.Microsoft.com/en-us/ms772425
Hope this information is useful.
-
First Pro CC v9.2 - media-related questions
My video camera creates files that are limited to 2 GB each, which translates to roughly about 11 minutes and 20 - ish seconds. Thus, a longer piece, there will be several MTS files which go hand in hand. When I import them, the Prime Minister will be "prick" who go together in the full clip. Thus, for example, if the physical files for a full clip are 00004 00005 and 0006, when I first import, it won't matter 00004 and show that it is the actual length of the clamp (in this case, a value of 26 + minutes.) This is perfect, it is very easy to work when I start creating sequences and use the files.
My problem is that something has happened recently with one of my project files. When I open it, almost all of the sequences show diagonal stripes indicating that something has happened with the original item. Watching them, I discovered that all that they show you is the first file on physical media (00004) and what should be 00005 and 00006, is what is broken, as they do not exist.
Now, I can manually import 00005 and it will correctly display the length of 26 + minutes. I can do the same thing for 00006 and again, it will show the length. But if I try to shoot in 00004 again once (in a different folder in the tray), it shows only 11 minutes and some 20 seconds which is the physical element.
I hate having to re-import the new and recreate all the sequences in this project (there are MANY of them). And I don't know how I can re - import the original clip of "sewn" (like, re-importation 00004 so take it as long as the length, not the value 11 + minutes.)
Anyone have any suggestions here?
Delete my Cache media files seems to have solved the problem. I am baffled why this has happened with only this project and none of my others. But now that I deleted the cache, it conforms to all the files again and I can already see the sequences that have been "broken" yesterday that now show correct data in them.
If anyone has any idea why this can happen, I'm all ears.
-
SBS 2008 Migration to Server 2008 R2
Need to a company full of Windows SBS 2008 R2
Promo DC Server 2008 R2 to join 2008 the SBS domain.
SYSVOL and netlogon have not been replicated
Cant DCpromo SBS 2008 DC out
Hello
Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.
The question you have posted is related to Server 2008, it would be better suited in the Technet forums. Please visit the link below to find a community that will support according to your request.
http://social.technet.microsoft.com/forums/en-US/category/windowsserver/.
If you have any questions do not hesitate to answer, we would be happy to help.
-
My problem (information system):Physical memory (RAM) installed 8.00 GBTotal physical memory 4.00 GB364 MB available physical memoryI installed 8 GB (4 x 1 GB, 2 x 2 GB)SBS 2008 should recognize 8GBWas not a migration of Small Business SERVER 2003Does not understand how this could be a hardware problemAny ideas much appreciated
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in forum Windows Small Business Server . You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/category/SBSServer
-
In July 2010, I've migrated a SBS2003 system to a system of SBS2008. There were a few hiccups along the way, but eventually everything worked very well and the original server was demoted and closes.
Fast forward to today, June 2013, and now that I see errors in the event log that read:
«This server is the owner of the following FSMO role, but considers that it not invalid.»
"This directory server has not recently received replication of a number of directory servers."
And when you run NTDSUTIL I can't join the domain controller by name or the domain name. I always get the following error message:
"Error DsBindWithSpnExW 0x6ba (the RPC server is unavailable".I have read and tried all the imaginable solutions I could find. However, the difference between my situation and all the other scenarios that I have met is that there is usually another available domain controller. This isn't my case.
Here is my configuration:
1 - SBS 2008 Server.
7 - workstations running Windows 7 Professional
I can't run Active Directory users and computers, Active Directory and approvals, or make changes in the DNS. However, DNS is working and my domain controller points to itself as a single domain controller and resolves the name to the IP address.
That I could track down, it's the original domain controller does not correctly downshift and there is always a ton of references to it in Active Directory, but I can't run any tools to remove the reference and seize the roles.
Is there someone out there who can help you?
Thanks in advance for your suggestions
I would recommend posting your query in the TechNet Forums. This forum is dedicated for windows servers... We'll find a solution much more effective here...
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
-
Vista Ultimate on a SBS 2008 domain, Linksys DMA2200 - managed to do work and why
I could get my Linksys DMA2200 to connect to a Vista Ultimate computer joined to a domain on the first try!
Well, let's be realistic. On my 200th test or almost, but the first test after I came across an idea.
Let me turn away from strategies area, firewalls and all the rest. It really has nothing to do with him apparently, except to the extent where you may not have done something stupid to put in place certain exclusions.
I have not really decided if I'll put it immediately in the public domain or if so, when.
Just to tell you that the support Linksys said, it couldn't be done, but it can.
Check out my blog for updates on the publication of this information, or on my website.
Well, I had a bit of a missed out on the first DMA2200 and just got a replacement. I have everything working fine now (with the exception that after 2-3 minutes, the box freezes if it is connected to the Media Center, just play a DVD or waiting on parameters).
Here's how to work with a computer joined to the domain, at least one running VIsta Ultimate Edition and SBS 2008, but I think it will work in general.
- On the field, create a user as follows:
- User name is Mcx1. Note that this is the same as the local user created on the computer of MC.
- The password does not appear to matter.
- Make the members of the following groups:
- Directors
- Domain users
- Remote Desktop users
- On the Vista Ultimate computer, make sure that this domain account is configured for the computer and displays these groups.
- Disable user account control. If it is enabled, the Extender to connect but then unplug immediately. An error event 107 will be published in newspapers of Media Center files. It is the dialogue of the authorization request which causes this error and disconnects from the Extender.
That's all. At some point during my reading/struggle to make it work, I got the Mcx1 local account as a member of administrators and users to the remote desktop, but when I did the re-install, it is no longer the case and it works fine.
For info, I have an ATI-wonder tuner attached to the VIsta box with a cable card, and the image on the HD and encrypted channels is great with just the connections component and 1080i. Works exactly as you think it should.
Now if I can only operate for longer than 2-3 minutes without having to restart...
Hope Linksys pays attention when they said it was impossible.
Best, Larry
If anyone has any ideas on the gel in question, let me know.
- On the field, create a user as follows:
-
Pass Cisco 871 and VPN to the SBS 2008 Server
to precede the questions below, I'm responsible for COMPUTING internal with several years of site / offsite support. I also have very limited knowledge of the inner workings of a Cisco device. That said, I've beaten my head against a wall, trying to configure my router Cisco 871 to allow access to our internal server of SBS 2008 VPN hosting services. I think I, and properly configured the SBS 2008 Server.
I use advanced IP services, version 12.4 (4) T7
Here is the \windows\system32\conifg\system running
Building configuration...
Current configuration: 9414 bytes
!
version 12.4
no service button
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug datetime localtime show-timezone msec
Log service timestamps datetime localtime show-timezone msec
encryption password service
sequence numbers service
!
hostname yourname
!
boot-start-marker
boot-end-marker
!
Security of authentication failure rate 3 log
Passwords security min-length 6
logging buffered debugging 51200
recording console critical
enable secret 5 *.!
No aaa new-model
!
resources policy
!
PCTime-5 timezone clock
PCTime of summer time clock day April 6, 2003 02:00 October 26, 2003 02:00
IP subnet zero
no ip source route
IP cef
!
!
!
!
synwait-time of tcp IP 10
no ip bootp Server
"yourdomain.com" of the IP domain name
name of the IP-server 65.24.0.168
name of the IP-server 65.24.0.196
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
inspect the IP name DEFAULT100 appfw DEFAULT100
inspect the IP name DEFAULT100 cuseeme
inspect the IP name DEFAULT100 ftp
inspect the IP h323 DEFAULT100 name
inspect the IP icmp DEFAULT100 name
inspect the IP name DEFAULT100 netshow
inspect the IP rcmd DEFAULT100 name
inspect the IP name DEFAULT100 realaudio
inspect the name DEFAULT100 rtsp IP
inspect the IP name DEFAULT100 sqlnet
inspect the name DEFAULT100 streamworks IP
inspect the name DEFAULT100 tftp IP
inspect the IP udp DEFAULT100 name
inspect the name DEFAULT100 vdolive IP
inspect the name DEFAULT100 http urlfilter IP
inspect the IP router-traffic tcp name DEFAULT100
inspect the IP name DEFAULT100 https
inspect the IP dns DEFAULT100 name
urlfilter IP interface-source FastEthernet4
property intellectual urlfilter allow mode on
urlfilter exclusive-area IP Deny. Facebook.com
refuse the urlfilter exclusive-domain IP. spicetv.com
refuse the urlfilter exclusive-domain IP. AddictingGames.com
urlfilter exclusive-area IP Deny. Disney.com
urlfilter exclusive-area IP Deny. Fest
refuse the urlfilter exclusive-domain IP. freeonlinegames.com
refuse the urlfilter exclusive-domain IP. hallpass.com
urlfilter exclusive-area IP Deny. CollegeHumor.com
refuse the urlfilter exclusive-domain IP. benmaller.com
refuse the urlfilter exclusive-domain IP. gamegecko.com
refuse the urlfilter exclusive-domain IP. ArmorGames.com
urlfilter exclusive-area IP Deny. MySpace.com
refuse the urlfilter exclusive-domain IP. Webkinz.com
refuse the urlfilter exclusive-domain IP. playnow3dgames.com
refuse the urlfilter exclusive-domain IP. ringtonemecca.com
refuse the urlfilter exclusive-domain IP. smashingames.com
urlfilter exclusive-area IP Deny. Playboy.com
refuse the urlfilter exclusive-domain IP. pokemoncrater.com
refuse the urlfilter exclusive-domain IP. freshnewgames.com
refuse the urlfilter exclusive-domain IP. Toontown.com
urlfilter exclusive-area IP Deny .online-Funny - Games.com
urlfilter exclusive-area IP Deny. ClubPenguin.com
refuse the urlfilter exclusive-domain IP. hollywoodtuna.com
refuse the urlfilter exclusive-domain IP. andkon.com
urlfilter exclusive-area IP Deny. rivals.com
refuse the urlfilter exclusive-domain IP. moregamers.com
!
policy-name appfw DEFAULT100
http request
port-bad use p2p action reset alarm
port-abuse im action reset alarm
Yahoo im application
default action reset service
service-chat action reset
Server deny name scs.msg.yahoo.com
Server deny name scsa.msg.yahoo.com
Server deny name scsb.msg.yahoo.com
Server deny name scsc.msg.yahoo.com
Server deny name scsd.msg.yahoo.com
Server deny name messenger.yahoo.com
Server deny name cs16.msg.dcn.yahoo.com
Server deny name cs19.msg.dcn.yahoo.com
Server deny name cs42.msg.dcn.yahoo.com
Server deny name cs53.msg.dcn.yahoo.com
Server deny name cs54.msg.dcn.yahoo.com
Server deny name ads1.vip.scd.yahoo.com
Server deny name radio1.launch.vip.dal.yahoo.com
Server deny name in1.msg.vip.re2.yahoo.com
Server deny name data1.my.vip.sc5.yahoo.com
Server deny name address1.pim.vip.mud.yahoo.com
Server deny name edit.messenger.yahoo.com
Server deny name http.pager.yahoo.com
Server deny name privacy.yahoo.com
Server deny name csa.yahoo.com
Server deny name csb.yahoo.com
Server deny name csc.yahoo.com
audit stop trail
aol im application
default action reset service
service-chat action reset
Server deny name login.oscar.aol.com
Server deny name toc.oscar.aol.com
Server deny name oam - d09a.blue.aol.com
audit stop trail
!
!
Crypto pki trustpoint TP-self-signed-1955428496
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1955428496
revocation checking no
rsakeypair TP-self-signed-1955428496
!
!
TP-self-signed-1955428496 crypto pki certificate chain
certificate self-signed 01
308201B 8 A0030201 02020101 3082024F 300 D 0609 2A 864886 F70D0101 04050030
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31393535 34323834 6174652D 3936301E 170 3032 30333031 30303035
33315A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 39353534 65642D
32383439 3630819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100CB6B E980F044 5FFD1DAE CBD35DE8 E3BE2592 DF0B2882 2F522195 4583FA03
40F4DAC6 CEAD479F A92607D4 1 B 033714 51C3A84D EA837959 F5FC6508 4D71F8E6
5B124BB3 31F0499F B0E871DB AF354991 7D45F180 5D8EE435 77C8455D 2E46DE46
67791F49 44407497 DD911CB7 593E121A 0892DF33 3234CF19 B2AE0FFD 36A640DC
2 010001 HAS 3 990203 AND 77307530 1 130101 FF040530 030101FF 30220603 0F060355 D
1104 1B 301982 17796F75 726E616D 652E796F 7572646F 6D61696E 2E636F6D 551D
301F0603 C 551 2304 18301680 145566 4581F9CD 7 5F1A49FB 49AC9EC4 678908FF
2A301D06 04160414 5566 745 81F9CD5F 1A49FB49 AC9EC467 8908FF2A 03551D0E
300 D 0609 2A 864886 818100B 3 04050003 903F5FF8 A2199E9E EA8CDA5D F70D0101
60B2E125 AA3E511A C312CC4F 0130563F 28D3C813 99022966 664D52FA AB1AA0EE
9A5C4823 6B19EAB1 7ACDA55F 6CEC4F83 5292 HAS 867 BFC65DAD A2391400 DA12860B
5A 523033 E6128892 B9BE68E9 73BF159A 28D47EA7 76E19CC9 59576CF0 AF3DDFD1
3CCF96FF EB5EB4C9 08366F8F FEC944CA 248AC7
quit smoking
secret of username admin privilege 15 5 *.!
!
Policy-map sdmappfwp2p_DEFAULT100
!
!
!
!
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
Description $$$ FW_OUTSIDE$ $ES_WAN$ ETH - WAN
address IP dhcp client id FastEthernet4
IP access-group 101 in
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
inspect the DEFAULT100 over IP
IP virtual-reassembly
route IP cache flow
automatic duplex
automatic speed
sdmappfwp2p_DEFAULT100 of service-policy input
out of service-policy sdmappfwp2p_DEFAULT100
!
interface Vlan1
Description $ETH - SW - LAUNCH$ $INTF - INFO - HWIC-$4ESW $ES_LAN$ $FW_INSIDE$
the IP 192.168.0.1 255.255.255.0
IP access-group 100 to
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
IP virtual-reassembly
route IP cache flow
IP tcp adjust-mss 1452
!
IP classless
!
!
IP http server
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
the IP nat inside source 1 list the interface FastEthernet4 overload
IP nat inside source static tcp 192.168.0.100 1723 1723 interface FastEthernet4
IP nat inside source static tcp 192.168.0.100 25 25 FastEthernet4 interface
IP nat inside source static tcp interface 192.168.0.100 80 80 FastEthernet4
IP nat inside source static tcp 192.168.0.100 interface FastEthernet4 443 443
IP nat inside source static tcp 192.168.0.100 interface FastEthernet4 987 987
!
recording of debug trap
Note access-list 1 INSIDE_IF = Vlan1
Remark SDM_ACL category of access list 1 = 2
access-list 1 permit 192.168.0.0 0.0.0.255
access-list 100 remark self-generated by the configuration of the firewall Cisco SDM Express
Access-list 100 = 1 SDM_ACL category note
access-list 100 deny ip 255.255.255.255 host everything
access-list 100 deny ip 127.0.0.0 0.255.255.255 everything
access ip-list 100 permit a whole
access list 101 remark self-generated by the configuration of the firewall Cisco SDM Express
Note access-list 101 = 1 SDM_ACL category
access-list 101 permit tcp any any eq 1723
access-list 101 permit tcp any any eq 987
access-list 101 permit tcp any any eq 443
access-list 101 permit tcp any any eq www
access-list 101 permit tcp any any eq smtp
access-list 101 permit udp host 65.24.0.169 eq field all
access-list 101 permit udp host 65.24.0.168 eq field all
access-list 101 permit udp host 24.29.1.219 eq field all
access-list 101 permit udp host 24.29.1.218 eq field all
access-list 101 permit udp any eq bootps any eq bootpc
access-list 101 deny ip 192.168.0.0 0.0.0.255 any
access-list 101 permit icmp any any echo response
access-list 101 permit icmp any one time exceed
access-list 101 permit everything all unreachable icmp
access-list 101 deny ip 10.0.0.0 0.255.255.255 everything
access-list 101 deny ip 172.16.0.0 0.15.255.255 all
access-list 101 deny ip 192.168.0.0 0.0.255.255 everything
access-list 101 deny ip 127.0.0.0 0.255.255.255 everything
access-list 101 deny ip 255.255.255.255 host everything
access-list 101 deny ip any one
not run cdp
!
!
control plan
!
connection of the banner ^ CCCCCAuthorized access only!
Unplug IMMEDIATELY if you are not an authorized user. ^ C
!
Line con 0
local connection
no activation of the modem
telnet output transport
line to 0
local connection
telnet output transport
line vty 0 4
privilege level 15
local connection
transport input telnet ssh
!
max-task-time 5000 Planner
Scheduler allocate 4000 1000
Scheduler interval 500
endAll that top has been configured with the SDM interface. I hope someone here can take a look at this and see what my question is, and why I can't connect through the router.
All thanks in advance to help me with this.
Jason
Based on your description, I am assuming that you are trying the traffic PPTP passthrough via the router 871, and the PPTP Protocol ends on your SBS 2008 Server.
If this is the correct assumption, PPTP uses 2 protocols: TCP/1723 and GRE. Your configuration only allow TCP/1723, but not the GRE protocol.
On 101 ACL, you must add "allow accord any any" before the declarations of refusal:
101 extended IP access list
1 allow any one
I guess that the PPTP control connection works fine? Are you able to telnet to the router outside the ip address of the interface on port 1723?
-
I try to install SBS 2008 OEM on TD100 without success.
TD100
2 x 250 GB sata
4 x 750 GB sata
4 GB of ram
apparently only works with the verion Easyinstall 1 or 2.
Any ideas?
According to the EasyStartup page
http://www-307.IBM.com/PC/support/site.WSS/easy-start.html
Technical Council
If you want to install Windows SBS 2008 operating systems on one of the following systems:
- ThinkServer TD100/TD100x
- ThinkServer RD120
Follow the steps below:
- Boot and install with the operating system DVD
- Get out to the Lenovo Web site and download and install the drivers for devices from here.
For a manual installation of Microsoft Windows Server 2008, please click here
http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/thinkcentre_software/windows_server_2008.PDF
-
Exchange 2007 SBS 2008 farm 25 port transport service
Hello guys,.
I have the following problem;
-sbs 2008
-exchange 2007
have random closing port 25.
Restart the result in a code exchange transport service could not stop the service.
Restart the entire server has solved the problem for abouth 1 day.
Things I've done,
-Windows Update Server
-Exchange of the sp1 update to sp2 to sp3 ROLLUP 17
-change the opening of transport service for instead of the network administrator account.
-drive c has 18 GB of free space.
-imposed d player has 200 GB of free space in the database.
-restart the transport service result in not able to shut down the service.
-telnet external to the server on port 25, especially when there is the problem have a black screen. Since today have not yet opening the port.
I don't know how to solve this problem at this time.
Restarting daily, this isn't a solution.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
Exchange Server 2007 SBS 2008 Service Pack problems
I am server running Exchange 2007 on Small Business server 2008 (SBS 2008). I tried to install SP2, but it omits the two windows update and manually. Can someone tell me first what version I am running?
Help / form displays the Exchange Management Console:
Version 08.01.0436.000
And repairs on Exchange Server from programs and features shows 2007 SP1 setup. So I think that SP2 to be then I also ran SP3 but it does not work.
Here are the lines to the end of a journal:
[05/03/2014 08:54:13] [0] Setup will run the task 'uninstall msipackage.
[05/03/2014 08:54:13] [1] Setup launched task 'uninstall-msipackage - logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' - '24b2c164-de66-44fe-b468-a46d9d5e6b31'-PropertyValues ProductCode' BYPASS_CONFIGURED_CHECK = 1 DEFAULTLANGUAGENAME = FRA "
[05/03/2014 08:54:13] [1] start of treatment.
[05/03/2014 08:54:13] [1] 'PackageName' property is 'EXCHANGESERVER.msi.
[05/03/2014 08:54:13] [1] remove the MSI package with the code "24b2c164-de66-44fe-b468-a46d9d5e6b31".
[05/03/2014 09:09:01] [1] [ERROR] an unexpected error
[05/03/2014 09:09:01] [1] [ERROR] failed to remove product with code 24b2c164-de66-44fe-b468-a46d9d5e6b31. Fatal error during installation. Error code is 1603. Last error reported by the .msi package is ' could not open key: UNKNOWN\Components\7ABFE44842C12B390AF18C3B9B1A1EE8\461C2B4266EDEF444B864AD6D9E5B613. Check that you have sufficient access to that key or contact your support team. '.
[05/03/2014 09:09:01] [1] [ERROR] fatal error during installation
[05/03/2014 09:09:01] [1] end of the treatment.
[05/07/2014 19:45:17] [0] end of the installationThere is a registry key to match and used for the configuration administrator account has access to it, I think? What does this newspaper?
This issue is beyond the scope of this site and must be placed on Technet or MSDN
http://social.technet.Microsoft.com/forums/en-us/home
http://social.msdn.Microsoft.com/forums/en-us/home
-
SBS 2008 STOP: c000021a [fatal system error]
I found myself, it's a pretty irritating position.
My SBS 2008 Server has failed and cause me a lot of pain in the process.
There was a fairly comprehensive backup plan in place, Acronis image (daily), picture Windows system (per day) and Bexec.
The last test DA we have worked well and I was able to restore the acronis on a virtual machine and start.
Now, we actually had an error that none of the backups work! All with the same error inside a virtual machine and a physical hardware code.
The error is:
Action taken:
Catering to VM
Load the SBS support to repair the system (it prompt for the password for the Admin user.) Didn't know that he was SBS with AD, we used a different account.)
Download offline NT password, select Admin and password empty
Load the SBS support to make the system repair, sfc scan & chckdsk
Do some reg settings so it does not restart when it BSOD (still can not managed to do a memory dump well.)
All returned without errors and fine.
A restart of the same mistake.
Tried all F8 options, all with the same error. Even safe mode!
Can anyone suggest me please a few alternatives to get it online so I can connect.
I had to reinstall the server from scratch so that it is up and running but some settings that I need to the virtual machine that I just thought that I would be able to restore from a previous backup.
Rob
Hi Robert,.
My apologies for the delay in response.
Issues related to Small Business Server are taken in the TechNet forums. Please ask your question on the forums.
Hope the information is useful.
-
SBS 2008 - Server 2008 site to site vpn problem.
Hi all
I have a box of SBS 2008 I want to add another server to the remote site (standard 2008). Currently, VPN works great on SBS and I can compose anywhere via the pptp network and join.
I added the RRAS branch again 2008 server role. Connection to the configured application, since VPN was already running on SBS, I just added to the request and the road. Both servers have user names Eric their numbering interfaces to, when I connect branch to SBS, he just connects in seconds, get IP address and routes are added, when I check the SBS it appears as inaccessible, when try to connect manually I either get error RRAS 0 or a pop up says the modem is already in use or not properly configured.
Grateful if someone can the advice that I've spent 2 days on this.
Thanx
If you can repost this thread under http://blogs.technet.com/b/windowsserver/, you can get a lot of fruitful discussions, solutions...
-
SBS 2008 cannot connect with the admin account
Hello
I have intalled SBS 2008 on my server. Yesterday he installed updates, now I can't connect using my administrator account (it says wrong user name and password). The only way I could log in with my credentials is hollow in Safe Mode.The server is used as a controller of domain, MS Exchange and the file and printer sharing. None of these processes work properly. I can access the drives mapped to the user's computer and Office does not connect to Microsoft Exchange.I appreciate any help you can give. Thank you.Support is located in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
Need help with the error of the EFS for SBS 2008
I get the following for encryption: "year error occurred applying attributes to the file", then "strategy of recovery configured for this system contains an invalid recovery certificate" for encryption on SBS 2008. Server doesn't let me encrypt on our network. Our certificate on the server says it is valid and run cipher/r does not solve our problem.
Post in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/
Maybe you are looking for
-
Hello I have a Macbook and I'm used to using a Windows laptop complete with Anti Virus etc etc. including safe online that gives a green check mark or Red Cross next to all your hits when you search on Google. I must say that I hate not having this f
-
Graph of storage (about this Mac >; storage) seems wrong. Problem?
I have a macbook pro running El Capitan. When I open "about this Mac" and go to the tab "Storage", here is what I see Note that the disc is a 500 GB drive. There are approximately 375 GB of free space. «But as you can see, on this Mac > ' storage ' s
-
Satellite P305D-S8900 - LAN cable is a schooner of connection
Hello I can connect my LAN cable to my computer and the computer will detect and indicate that it is there. The problem is that none of the software on the computer seems to see that there is a link. Internet connection screen says that the LAN cable
-
When you press one of the buttons, I get the message "OSD Lockout" & the only thing I can do is turn off after you push the power button twice. I can't access the menu or even change the volume. Is anyway to fix this? Help, please! Thank you!
-
How to implement a function button to trigger several buttons
Hi all, I have 6 buttons 'Read' in the front panel, each one works separately. In the block diagram, each button is inside an event. Now if I want to create a new button, that when clicked, all of these 6 buttons can be triggered, how can I do it? Th