The mouse cursor flashes busy

Similar Questions

• The mouse cursor stays busy

  Original title: why is the "busy" cursor always on?

  I am running Windows 7. Instead of the normal arrow pointer, the cursor on my desk is always the one who "occupied" (arrow pointer with an animated blue circle next to him). When you use applications such as games, Word, or Excel, the cursor is normal, but when I have the mouse on the desktop, that 'busy' returns. I have conducted analysis antivirus and have developed vacuum., and this problem has recently appeared on two of my PC (wireless networking); We have a wireless mouse; the other is wired. I use Windows update regularly - has a recent update has caused this?

  Hello

  I suggest you to temporarily disable the security software by referring to the link:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Security software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Please let us know if the problem still persists. We will be happy to help you.

• 15 r007TX 15 HP laptop: HP laptop screen stays black with the mouse cursor flashing

  Hello

  Here I am facing probhlem. my laptop is started but screen stays black and a slider is binking on that...

  I just perform a clean boot and once I restarted my laptop and then I faced this problem...

  Please help me...

  I have laptop HP 15 15-r007TX with windows8.1 64 bit having 4 GB RAM with i5 4 genration processor with dedicated 2 GB and 1 TB of hard disk graphics card...

  Please help me...

  Thankss...

  Hi @Shawnfrost,

  Welcome to the HP Forums!

  This is a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that when you start your laptop, you get a blank screen with a blinking cursor.

  Here is a link to help overcome this problem.

  Computers laptops HP - computer won't start (Windows 8)

  It can also help.   Laptops HP - computer will not start and the lights blink or the computer will beep.

  If you enjoy my guarantor please click on button below congratulations to say thank you.

  If it solves your problem, please click the solution in order to allow other people to find this information.

  Best of luck and have a great weekend!

• Bookmark shortcut does not work if the mouse cursor is focused in the version of the flash plugin.

  I tried to open the bookmark panel shortcut [ctrl + shift + B] buttons when the mouse cursor is focused with the flash plugin. But it does not open. But I clicked on the page and he's trying again, he opens the bookmark panel.
  Try the following link
  [Example: https://learnable.com/courses/a-crash-course-in-mobile-web-design-195]

  This may or may not be a problem.
  It's just a suggestion...

  This is a limitation of the works in Firefox.
  
  If a plugin is developed, which makes this shortcut key is no longer so he treats all keys work.
  
  You have to click outside the plugin, if you need to use a keyboard shortcut.

• The mouse cursor does not appear on the center of the screen to start upward.

  The mouse cursor does not appear on the center of the screen to start upward.  If the mouse moves a mobile cursor appears in the upper left corner of the screen.  Have to keep rebooting until the mouse cursor properly supported.

  The mouse cursor does not appear on the center of the screen to start upward.  If the mouse moves a mobile cursor appears in the upper left corner of the screen.  Have to keep rebooting until the mouse cursor properly supported.

  Suggestions:

  Go to Safe Mode:

  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. Use the up/down arrow and selectSafe Mode with command prompt.

  1. in safe mode, please do a system restore. Choose the date where you did not have this problem as your restore point.
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  2. always in safe mode, do a check of the file system. See if file check will check for corrupted files and repair them.

  Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Turn the mouse cursor

  This only happens when I visit Facebook, but the mouse cursor turns and will not stop. Firefox will never block or unresponsive, but it behaves as if there is always from my PC 'think '. Any ideas on how to stop my cursor to turn constantly?

  
  

• The mouse cursor disappears on the address and search bars.

  In Firefox 10, the mouse cursor disappears from the address bar or the search bar after a certain time, or I guess that after visiting a site that I paste below. I don't see what part of the word I click on the address bar or the search bar for the correction because there is no mouse cursor. After clicking on tools and options cancel, the mouse cursor appears (I make no changes to the options) or when I click on customize in the navigation bar, then the icons I click on Cancel again without modification, and the mouse cursor appears again (as you can understand some trigger for windows option implementation even without change is done). I uninstalled firefox 10 just for this reason. Back to Firefox 9. Safe mode - same problem happens. So no problem addon. And the same thing happened in another operating system, so this isn't a fault of a facility.

  Problem solved for me in the last version of firefox v.10.0.1

• The mouse cursor disappears when iTunes movie go full screen

  This isn't a question... actually I found a hack solution to this bug and I wanted to share it with other people having the same problem.

  Since the upgrade of the OS X El Capitan, I'm having a problem with my cursor disappears randomly. It is very repetitive if I start a video in iTunes with the enlarged screen and the cursor disappears. Indeed, after entering mode full-screen, iTunes mask the cursor of the mouse that is predictable. The problem is that iTunes may not reappear there again once, for example, when I go to another office for a temporary job.

  Move the mouse does nothing, escaping mode full screen does not come back. It is very annoying. Like I had never had such a frustrating experience prior to a new installation of El Capitan 10.11.3 and update iTunes to 12.3.3, I thought that this is due to the update to iTunes. So, I made another new facility of El Capitan, this time without updating iTunes. But the problem still exists. It is interesting that I had this problem on my MacBook Pro 17 "end 2011 and not with my iMac 21.5" mid-2009!

  After a little research, I found that this bug is not because of El Capitan, and happened randomly in the other years dating back to Tiger and maybe before.

  Only new change I had made in my MBP Preferences system , was in the part of accessibility, and it was related to Zoom. I had always used this feature, but I put the Zoom Style 'full-screen'. This time (after the new installation of El Capitan), I had changed to 'Picture-in-Picture'.

  I changed the Style of zoom "full screen" even once, and the problem resolved.

  If this does not work for you, can be debilitating, other options, such as 'Use keyboard shortcuts to zoom' or 'Use of scrolling with keys of change to zoom movements,' can solve the problem.

  We all know that it is a bug, and he has been there for a long time. I found that many people had reported it to Apple, but the problem persists.

  For those of you who want to use the zoom "Picture-in-Picture" style, or set the zoom style full screen does not solve the problem of their mouse disappears, I will mention a few ways to recover the mouse cursor. The following solutions are applied to a mouse cursor disappeared after entering the movie to iTunes (or any other application) full screen.

  1. Move the mouse until the switching Office brings back the cursor. Now, you can switch the desktop computer and do whatever you want. (It's easier work, at least for me).
  2. Use Alt - Tab to switch to another program; This will bring the mouse cursor.
  3. Press Ctrl + F2 to activate the Apple menu. (You can also move your cursor away to top left and click to activate the menu.)
  4. Press Ctrl + up arrow (or swipe up with 4 fingers on the touchpad) to activate the control of the Mission.

  You can also find other ways to retrieve the cursor of your mouse.

  Hope this can help you with the mouse pointer disappears.

  In MBP El Capitan the pointer of the mouse is where you assign to ' picture in picture ' or 'full screen '.

  If you miss your mouse pointer, accessibility-> display "Shake mouse to locate" check to find your mouse pointer. It should be there.

  Note: you have posted in the discussion of the Mavericks, should have used the ElCapitan discussion...

• Qosmio G20 - the mouse cursor freezes

  Play command and conquer tiberium wars a coupke of minutes in the game, the mouse cursor will feeze not allowing me to select units, etc.. I have to use Ctrl, alt, del to exit the game. This does not in all the other games that I used on the laptop. Is there something I can do?

  Details of my laptop are: the present report time: 24/03/2008, 09:49:38
  Machine name: YOUR-3CB2BF2DC5
  Operating system: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.070227 - 2254)
  Language: English (regional setting: English)
  System manufacturer: TOSHIBA
  System model: Qosmio G20
  BIOS: v1.30
  : Processor Intel (r) Pentium (r) M 2.26 GHz
  Memory: 1024 MB RAM
  Page file: 508 MB used, 1952 MB of available space
  Windows Dir: C:\WINDOWS
  DirectX version: DirectX 9 .0c (4.09.0000.0904)
  DX setup parameters: not found
  DxDiag Version: 5.03.2600.2180 32 bit Unicode

  Hello

  If I understand your game freeze but who knows why this happen. As you can see it happen with this game only.
  Have you tried to delete this game and make new facility?

• I'm trying to select several images (Forms), but I have not found a selection tool. This selection tool to transform the mouse cursor in an arrow and it is possible to select several images or figures. I use Microsoft Excel for Mac 2011 Version 14.5.3.

  I'm trying to select several images (Forms), but I have not found a selection tool. This selection tool to transform the mouse cursor in an arrow and it is possible to select several images or figures. I use Microsoft Excel for Mac 2011 Version 14.5.3. Thank you!

  tupensi wrote:

  use Microsoft Excel for Mac 2011 Version 14.5.3. Thank you!

  Then you should post on the Microsoft Mac forums where to hang out the gurus of the Office, as is the Microsoft product, with that you are having problems:

  http://answers.Microsoft.com/en-us/Mac

• How to control the mouse cursor using EEG signals

  Hello world

  I am doing a project of cursor control using EEG signals. The idea is to find a way to all signals in a specific period of time in order to find the signal Ridge. Then, the highlight will be a parameter to control the position of a cursor.

  Can someone tell me the function that allows you to control the mouse cursor?

  I also found an old topic asking about it (http://forums.ni.com/t5/LabVIEW/Moving-Mouse-using-Labview/td-p/1285842) and I run an example of this link ( smercurio_fc) program. My cursor is stuck in the upper left corner of the screen, I can't control it again. Can you tell me how to run this program and to use the windows API?

  Thank you in advance.

  Sorry, but I can't do it for you.

  As I advised, you should take the free online tutorials. You clearly lacks the basic concepts of LabVIEW, as data flow.

  Things more: in your real applicaton does not use DAQ Assistant, screw Express are generally not optimal for data acquisition. It is safer and better use good DAQmx live. What is the equipment you use? Sampling rate, etc.?

  Why do you need to read data files? For testing? I thought that you will acquire data active, right? In your VI generate you some signals and write in a data file. Is this also for testing?

  There are several constructs in your VI which simply don't make sense.

  So again, I really suggest to go through online Core1-2 teaching material, which is accessible if you are a student, or if you have shared services provider license... It will really help.

• Laptop screen stays black with the mouse cursor only after that comes the HP and Windows logo

  Hi all

  No, my laptop model is HP Pavilion dv6 1337tx. My OS is Windows 7 Home Premium 32 bit. So, today, I shut my laptop down by force by pressing the power button because it did not at this time. Then the next time I turned it the wrong problem started. Whenever I'm on the HP logo sometimes and then the Windows logo comes also. But then the screen stays black and the mouse cursor appears. So, what can be the cause of this problem? I also tried to open with 'safe mode' and 'safe mode with command prompt', but they did not help either.

  Note - I tried the method of discharge after taking off the battery and holding down the power button. He could not help. All LEDS are working properly. I have no extra monitor, so I can't check the display elsewhere. Also, I ran the memory test which shows that everything is fine. Please suggest what I can do now as I can not enter the laptop now. What can be the reason?

  Black screen with blinking cursor:

• HP Envy 15 j140en: HP Envy connection as an administrator, just white screen the mouse cursor

  Hi all

  A new laptop had delivered today.  I have installed various software that I use and everyuthing was fine for a few hours that I have installed various bit of this and that.

  Then, all of a sudden I have connection and after my password entry screen, the laptop just hangs with the mouse cursor.

  BUT, I created a non admin user and it "s all very well.

  I tried various fixes I found online, including some here, but nothing seems to work.

  It is a unit refurbed FYI direct to laptops.

  Thanks in advance for any help.

  Carl

  Hello

  Yes, a system restore solved all this.   :-)

  Thank you

• change the shape of the mouse cursor

  Hi all

  is it possible to change the shape of the mouse cursor?

  When I start my VI, the curosr takes form tha of the hand tool.

  How can I put it to the standard shape of the mouse cursor?

  Thank you

  Ritesh

  Try this.

• Is it possible to set the mouse cursor in the Xcontrol?

  

  In my Xcontrol, I want to change "the mouse cursor. But I found, I can only change the cursor in the VI, which contains my Xcontrol.

  An example: I edited the example labview "Dual Mode thermometer. In case of change of front/data, I put the cursor 2. but it did not work?

  Here is an example to change the cursor when the user points the thermometer

  This mouse enter for the class VI of VI of façade:

  

  I have a similar setup for the mouse event leave with the value 1.

  Tone