The mouse loses the Bluetooth connection when left idle

Similar Questions

• All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  Tell us what event preceded "all of a sudden" - something to do with the software or hardware environment

• Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  WiFi connections are losing their strength increases the distance between the router and so as a general rule, there are some conflicting objects

  Try the following steps please

  The following actions and after each test to see if the issue is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
  5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• iMac loses the internet connection when I turn off wifi

  Any help appreciated! I'm not very computer savy! Can my grandson tell me (how) on some things.

  I lose the internet connection when wifi is disabled. It will happen when using any browser, Firefox-Safari-Google Chrome.

  Desktop computer is connected to the modem.

  Model name: iMac

  Processor name: Intel Core i7

  Processor speed: 3.4 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 8 MB

  Memory: 4 GB

  Any ideas? Thank you

  You can use an ethernet cable between the modem (= the internet connector) and the iMac.

  WiFi is like an invisible computer thread worms (among others) the modem. When you switch WiFi off, your computer cannot reach the modem and so there is no internet on your computer.

• The Bluetooth connection is not visible on the Satellite A100

  Hey,.

  I have a Satellite A100-797.
  The laptop had Vista Home Premium pre-installed.
  But I have upgraded to Vista Business (32 bit).
  Now my problem is that in Flash cards, the Bluetooth connection is not visible.
  If I press the F8 key on my keyboard, the menu appears when I normally can I enable / disable WIFI and Bluetooth.
  But only WLAN is now visible. I installed all the packages in the driver s page. And I am sure that those who are the most recent.

  Can someone help me please?

  Thank you
  Mathijs

  Hi Mathijs

  Thanks for your second assignment and useful comments.

• BlackBerry Dev Alpha insists the point on the Bluetooth connection mode.

  Hello.

  I tried several times updated BlackBerry Dev Alpha to the new firmware with the instructions on the website to update. Make sure that all the steps I did. I have tried but no luck. Desktop software did not update. I tried the troubleshooting, but I couldn't find any chance to try several times and it get messages that he has made available.

  I clicked on update and repair. When you click Repair, no fading, rather office continue to find the update software and finally sometimes found. When it concluded, Office Automation application password for the bluetooth connection (I'm sure bluetooth was disabled on device and my laptop) and it continued just as the device was only pretending to be connected with bluetooth. Then it starts to download. But even once, it never ends.

  I already have:

  > Remove the registry as indicated

  > set the USB for windows

  > enable development mode

  > set file sharing on

  > run the troubleshooting steps.

  No luck, I found . Everyone knows the same symptom?

  Yes of course. My Dev Alpha is updated at the moment. Even though she insisted update on Bluetooth connection mode, when install just re - check again if the connection is available and I just reconnect the device to continue the installation.

• Satellite T130-11U, lost the Bluetooth connection after installing Mobile Broadb

  I recently bought a Satellite T130-11U and established a connection with my Nokia N82, using PC Suite.
  Then I installed my broadband Mobile (operator TMN) and lost the Bluetooth connection.

  There must be a way to overcome this 'conflict '.
  Anyone with the same problem?

  Thank you.

  Hello

  Perhaps this 3rd party application is not compatible and that is the reason why this happens
  But first, you should check if the Bluetooth is always enabled

  In addition, you should check if this issue happen after installation of the new BT stack

  Here you will find the new BT stack:
  http://APS2.toshiba-tro.de/Bluetooth/

  Welcome them

• Satellite Pro U200 - how to activate the bluetooth connection

  How to activate the bluetooth connection?

  Hello

  First check to see if your computer supports BT
  If the laptop supports BT, then you should find a BT tag at the bottom of the unit.
  If there is no label then your machine was not equipped with internal BT module!

  If the laptop supports BT, then use the FN + F8 key to go to the BT
  Then BT should start installation and configuration.

  For more details, see this forum and this Toshiba BT Portal:
  http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ

• How to configure applications 'Find my iPhone' on the Apple Watch of fallback to iCloud, when the bluetooth connection is interrupted?

  It would be ideal if applications of "Find my iPhone" Apple Watch can be redirected via iCloud when the watch is connected to wifi, but the bluetooth with the phone connection is lost.

  Ongoing enforcement watch OS 2.1, coupled with the iPhone 6 more (iOS 9.2). Thank you!

  Hello

  The feature you described is not currently available on Apple Watch.

  It is a community of support based on the user, but if you want to suggest that Apple considers adding that as a new feature, you can do so here:

  https://www.Apple.com/feedback/watch.html

  All submissions are read (even if you do not expect to receive a response).

• Qosmio G50 asks to connect to the bluetooth device when installing BT stack

  Hello

  I have a Toshiba G50 - 13R it asks me to connect my bluetooth device while installing is not the bluetooth built into the laptop

  Thanks in advance

  Hello

  You have a BT label on the bottom of the unit?
  If this isn't the case, then the BT module is not installed.

  I also searched a little on the net bin and it seems that this laptop model was not equipped with internal BT

  Welcome them

• Lose the wireless connection when the modem connects to the internet.

  Hello

  I've updated my laptop to windows 7 (new installation).  I have a cable modem which is connected by ethernet to a wireless modem/router which I have configured to be a wireless access point (dhcp is the cable modem).  The laptop can connect wireless access point when the cable modem is not connected to the internet (so the ip address of the access point is 192.168.100.50 & the laptop takes an automatic ip address within the range). The problem is when I connect the modem cable to the internet, & so the ip address of the access point is derived the cable modem, the laptop can't connect to the access point. When I renew the ip address of the wireless card, it says it is connected to the selected network but the ip address is not correct, nor do I have access to the internet.

  The laptop connects fine to pick up the new ip address when it is ethernet connected the access point when the cable modem is both on or off, so I can access the local access point configuration when the modem cable is off, & can access the internet when the cable modem is enabled. When it is connected with the cable modem access point wireless at sea, both my wireless & ethernet connection say that they are connected to the selected network, but as soon as I turn on the cable modem, wireless connection says it is connected to an unidentified network, but my ethernet connection is connected to the selected network.

  I tried the broadcasting/no broadcast of the SSID, different levels of security, modification of the power saving options on the card wireless without success. I don't think it's a problem with the real network that the wireless card can capture the network & settings when the cable modem is disabled.

  This Setup has worked well when I had win xp.  My mobile phone can capture the network without wire end also & is able to access the internet.  The driver for the wireless card is current as well as the firmware on the access point.

  Can you please help? Thank you very much

  Hi Jack

  You led me in the right direction with the MAC addresses on the cable modem.  It's a simple solution... turn off the cable modem so it would refresh the MAC addresses of connecting devices, & hey presto, I wireless & ethernet access internet on my laptop with wireless internet on my laptop.

  Thank you for your perseverance.

  See you soon

• Apple TV (9.2.1) removes the internet connection when you try to use Siri

  Greetings,

  I think I saw network related issues with my Apple TV. Everything works fine most of the time. But sometimes, including, but not limited to, when I try to use Siri, Apple TV almost always drops the wireless internet connection. I've included a picture below of exactly what it looks like. I scoured both online that I can but it doesn't look like anyone has the same problems.

  I called Apple support and they suggested that I connect to another source of wifi. I used my hotspot on my iPhone and the Apple TV has worked well without any hitch in the connection. This leads me to believe it's firewall partner.

  However, I have disabled literally of each firewall setting I found in my router and still cannot find a solution. I also use a WAP browser in addition to router which is what my Apple TV is connected to. My WAP is an enterprise-level device, but I'm having issues access to the features of the admin of it network. Before I go and reset my WAP I wanted to get additional advice from people with experience in networking and firewall, especially with services like Siri.

  Thanks in advance. Pics and info of additional device below.

  Michael

  

  

  tvOS 9.2.1 (13Y772)

  A1625

  Zoom: off

  United States

  English

  Hello. I don't think that this has nothing to do with the firewall, etc. When you use Siri, you send your voice via Bluetooth to ATV. If your WiFi signal is weak, the Bluetooth maybe block, if you are using 2.4 GHz. could you try to connect to a network of 5 GHz and see if that helps?

• Have the intermittent connection when you use WiFi and conflict error IP address when using Ethernet

  I have intermittent problems with my wireless internet connection. I contacted the ISP and they analyzed the configuration of the modem-router, changed some and told me to try to reconnect. I try again and the connection is OK. The ISP has caress each other on the back and sent me on my merry way not-so-small. Problem is at an unpredictable time, problems (do) happen.

  Usually the failure scenario does not have a huge problem - plus one
  gene as a problem. I just keep trying to connect through Windows
  Network and sharing Center, and possibly the connection is made. But in some cases, time is critical; I eventually lose 10 to 20 minutes of typing-search-typing-correction-etc in a web form when the connection disappears before making a SHIPMENT. (Some time, after the failed wireless and re - connect, I was actually able to recover pretty quickly that the site has not been exceeded me.) So in this scenario I can't lost any strike.)

  I would like to connect my pc to the internet via an ethernet cable
  the modem-router. I could take this approach right after the wireless
  connection failed. Or in a preventive way, when I know I'll be typing-
  mode of research-type-fixed-etc and I want to be really sure. When I tried this, I get the error "Windows has detected an IP address conflict.

  What I do at this point to get around the Wi - Fi connection and connect through the Ethernet cable?

  The topic is edited for clarity of the moderator.* *.

  [Original title: LOST INTERMITTENT WIRELESS INTERNET CONNECTION]

  It is not clear what parameters your ISP technology management may have changed on your modem/router.  As a general rule, the ISP concerned the link between their server and your modem, but any fiddling with settings that control this link will not effect either on the link between your computer and the modem/router.

  If you still haven't reset your router to its default settings, do not unless you know the necessary internal router settings for you connect to your ISP.  If you have a cable Internet connection, the default settings may work OK, but if you have a DSL, they probably won't.

  You should not get this "IP address conflict" error when you connect the Ethernet cable.  Follow these steps:

  Open the "network and sharing Center" and then click on "change adapter settings".  You should see an icon for your wireless network adapter and an icon for your 'connection to the Local network' (your Ethernet connection).

  • Right click on each of the icons, and select 'properties '.
  • There should be a list titled "this connection uses the following items."  In this list, select "Internet Protocol Version 4 (TCP/IP)" and then click "Properties".
  • The radio buttons to "Obtain an IP address automatically" and "Obtain DNS server address automatically" should both selected.  If this is NOT the case, do so and OK your way out.  Furthermore, cancel your way.

  If a card has been configured to use a specific IP address, your "IP address conflict" should now be fixed (you may need to restart the computer for the change to take effect).

  If cards were already configured to obtain its IP address automatically, the problem lies in the configuration of your router.  You will need to access the router's Web utility to study and make changes.  To help you provide the brand and model of the router of the label on the back or the bottom.  Also do the following to a time where you have an Internet connection:

  Open a command prompt window (type cmd in the search box and press enter)

  1. In the black command prompt window, type the following command, and press ENTER after each line

  ipconfig/all > "% userprofile%\Desktop\ipinfo.txt".

  Notepad '% userprofile%\Desktop\ipinfo.txt '.

  output

  1. In the opened Notepad window, click Edit > select all (or press CTRL + A) and then click Edit > copy (or press Ctrl + C)
  2. In the body of your Question, right-click > paste (or press CTRL + V) the data of the Notepad window
  3. Close Notepad and remove ipinfo.txt from your desktop

• How can I cancel the Bluetooth connection failure messages?

  Hello dear friends,

  I tried something:

  establisch a port listener series bluetooth. This is a customer and always tries to connect to a device. When the bluetooth on the device is not turned on, BB still shows a message "connection failed...". ». I think that this message was shown by the operating system.

  I really didn't need this message. How can I cancel it?

  Thank you in advance!

  You can configure these messages to shut up.  To do on the BlackBerry smartphone go to Options, Bluetooth, select your Bluetooth device and choose the properties of the device.  Set the Trusted option in silent.

• Interruption of the USB connection when restarting a computer

  When the computer restarts, two USB DAQ devices are not visible in LV or MAX.

  To get these devices (USB-6210 and cDAQ 9211 with single chassis USB) for you sign up, I need to disconnect and reconnect the.

  Is there a way to get the LV to see devices without physically breaking and the USB connection?

  Carmen,

  It is a problem that we have seen previously, mainly when the OS loads, all the material is detected. In some cases USB devices are detected, but the BONE did not complete its driver loading process, causing a race condition. You are able to recover only when supply you either cycle the USB device or disconnect and reconnect the device.

  I had read the following article which explains how to force windows to delete and detect a USB device.

  http://digital.NI.com/public.nsf/allkb/1D120A90884C25AF862573A700602459

  Then I would create a batch file that runs each time the computer starts.