The MTS files seem to ignore executives during transitions of clip?

Similar Questions

• playmemories ver3.0.2 House cannot see the mts files

  Playmemories home v 3.0.2 can not see the mts files. He can see all the jpg files. The MTS files can be seen in windows Explorer and also read via windows media player.

  Please check if the AVCHD format is listed as one of the supported formats of PMH. In your toolbar, go to [help] - [about PMH...] and select [Supported Formats] in the window that will appear.

  If the AVCHD format is not supported, please connect your Sony camera via USB and try to import AVCHD video. The software should recognize your camera and add support for the AVCHD format.

  If my post answered your question, please mark it as "accept as a Solution.

  http://bit.LY/LapMagWin

• Cannot access my Windows Live Mail. Gives me the message "one of the installation files seems to be corrupted. Error: 0 x 80070002.

  Cannot access my Windows Live Mail. Gives me the message "one of the installation files seems to be corrupted. Error: 0 x 80070002. Source: WaitForCatalogue.

  original title: error 8 x 0070002

  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

• filmmaker does not recognize the MTS files

  I use Widows VIsta.
  I used the windows Director to edit MTS files and was very satisfied of this. Then it stopped working, it does not recognize the files more. As I have understood, by browsing forums, Director of windows LIVE should treat this type of video file. I've updated Windows LIVE essentials and requirements. Still not recognize the MTS file.  Can someone help me? Thank you.

  Your computer may be missing code, download and install K-lite code pack can solve the problem. K-lite code Pack is free and safe, and it includes almost every video code and audio code. Or it can convert your video to wmv video for a test, I know that windows movie maker supports wmv video well. And this guide will show you how to convert mts video to wmv video.

• Why no sound with the mts files

  I have the Prime Minister cs6, however there is no sound when I place the MTS files.

  concerning

  Pete

  Video and audio glitches. AVCHD video

• The MTS file date display information on screen time in CC PP

  I need to display the timestamp from date of the MTS files so I can see them in PP CC15. Is it possible to get rid of it within the program? Now, I have to do it in another program and then import the file. Takes too much time this way.

  Premiere Pro does not have this feature.  The closest you can get is display the timecode for clips that have it.  If these clips were recorded using Free Run, that would give you a time, but there is no way to see the date displayed in an overlay.

• First time. Great, but other times without sounds of the MTS files?

  Hello, I bought first Pro CC and when I used the first time with. The MTS files, all were great, but after a few days, I made another video project and my files (.) MTS) have no sound? I was searching the Internet and many people say convert), but is it really only in this way? Plese help, thank you. Jan.

  Wild guess: you forgot to patch source audio track

  

• NEED HELP as soon as possible update for Premiere Pro CC 2014 and now. The MTS files are not taken into charge/no recognized

  I have Windows 8

  3.4 Ghz 8 Intel Core i7

  32 GB of Ram

  PPCC2014

  I used first Pro CC for the last year or two and. The MTS files worked very well.  Since I've updated.  Can I use is no longer. MTS files.

  

  I sync all my images using plural eyes.  I've updated the plural eyes to make it work with the update new first Pro CC 2014.

  I tried to go back to first Pro CC; However, that has been updated as well.  It does not recognize the. The MTS files, but it does not matter the new .xml successfully created from the plural eyes 3.5

  If anyone knows help or workaround so I can complete my episode of TV.  It would be great.

  Also, I would prefer not to have to transcode anything.  Hours, hours and large files don't really work.

  I also looked in repacking.  I understand that clipwrap is perfect for that. However, I have Windows not Mac.  Other options look much too involved.  I would really just my Premiere Pro to work the way it's supposed to.

  Adobe Media Encoder is wrap?

  In any case, any ideas would be useful.

  Thank you

  Try to rename the parent folder containing the MTS clips.

• the most effective way to browse the MTS files

  I have been using mts for about 2 years now.

  When I get out of my car my camera sd I usually dump and go first.

  However, it becomes quite old and it takes a hell of a lot of time to go through 5-10 this way sd cards.

  Y at - it an application that I can use to view the mts files, as if it was a qt movie?

  with .mov can I just plug the card into my sd drive and browse in the finder. do not have to import or open a nle.

  I know that .mov is native in osx but y at - it a way to get a card that would allow my mac to treat the multilateral trading system the same?

  I think you need to CS6 for her to work.

• . No noise from the MTS files

  We use Premiere Pro to edit. MTS files.  We constantly had problems with Premiere Pro does not sound matter.  Normally, updated everything (not only Premiere Pro) will solve this.  We currently have a machine were nothing works, and from this second, we remove Premiere Pro to reinstall and try again.

  This nonsense of constantly fighting for the Premiere Pro to import sound lasts for months.  Why is it such a horrible struggle?  Is there something we can do?

  There are some good suggestions here, and I'll add a reminder for people to use the media browser to import media (as opposed to the import dialog box) with potentially dependent file like MTS formats.

  By 'folder-dependent', I mean the video may be in a directory and audio can be a file in a separate Directory. Then, if you import the video directly it can not see the audio. The media browser is smarter than the import dialog box, so he knows generally how access and import all of the media into a single import. The MTS files are not always dependent case (actually in most of my own media, they aren't) but they can be so it's good to use the media in doubt... browser and which would go to most of the other formats as well.

• the MTS files do not work in CS6... Why not Adobe

  If I have a file in my camera sony in Prem Pro .mts, reports the video but no sound?  If I have him drop it into CS5.5 sound works.

  I downloaded an updated version of the Prem Pro from Adobe today June 2012. And still he will not address the mts files?

  I don't understand why it is so difficult to find a solution to this problem. two of the worlds biggest companies Sony and Adobe, and none of them covers the question on their site, and yet it is clearly a major problem?

  I've seen talk about on the site of renaming of files, which does not work and would be a pain in the rear.

  Does anyone have a solution that works?

  Please?

  FIXED Yipeeee!

  It is not all good news though, but I have a solution that will definitely work for you, all that it's a bit drastic

  This problem has been to kill me. I just want to be able to drag and drop the MCS file in first pro, as I always have with other video files and all the nonsense to shoot the whole folder structure just won't DO, we do not live in the 70s. And thank God, the file structure is just stuff and nonsense.

  What is happening is that... something on your PC does not work files (and Adobe do not have any idea what it is) and besides that I do, but until a person learns, I can tell you that a full blow and reload new windows will be 100% solve the problem.

  Now, I don't have one for years, so it was a complete pain and took more than a day to recover all the way I like it and to be honest, it will be a week before as I have all my favorite programs work properly.  BUT I can tell you that with Premiere Pro installed, I can now just PULL THE FILES FROM the CAMERA PHOTO HARD DRIVE and let FALL THE LIKE ANYWHERE and better yet, pull them in first ruined as I want and they play 'Sound and all' and that my friends is the way it should be

  I really hope this helps some of you, I'm glad it works now and I can get some work done, I began to hate my new camera, but now, I can tell you it's A1

  For Adobe, I can tell you that some parameters of another installed program system is clearly the culprit but I can't for the life of me tell you who.  I can say that it is not mine, or the programs fault but a lack of tests on from Adobe.  Because clearly, it is not, and a good number on your forum, and many others. Software should work under any scenario, I'm not running certainly all the strange programs that should cause this.

  Until Adobe can pin point a solution and patch their program, I can recommend my solution buy guys and girls make sure to save all your mail, Favorites, passwords, documents and any other valuable to you before doing a clean install and if you will reply in the Groove with our favorite editor PP CS6.

  TTFN

  I need to get some work done

• How to use the mts files in first pro cc?

  Hello

  need help to get started with cc. I used the first cs5 for a school project, now, I started a cc membership and downloaded the first yesterday. Now, whenever I start it, it crashes instantly as soon as I put a mts file in the timeline, attempted several times. I have can´t open my projects cs5 in it either.

  No idea what to do here? I also used a cs6 trial version, but only once, I might never reopen, a video driver issue according to some advice I found (I have a computer hp envy laptop). Seems difficult, and I need to work with it urgently.

  In cs5, you have this popup where to fill the framerate and stuff, like mpeg4, before starting, didn t happen in cc...?

  Thanks, Anna

  The Module failed (amdocl64.dll) comes from your AMD/ATI Catalyst video driver.

  I would go to the Device Manager, do note the model of your AMD/ATI card, and then click it, go to the driver and take note of the installed video/Catalyst driver version. Next, go to the site Web of AMD and the Driver Downloads. Plug your model of AMD/ATI card and then your operating system and search for a newer driver from catalyst. Download and install cela, restart and test.

  Good luck

  Hunt

• The MTS files & Windows DVD creation (Windows 7 x 64)

  Question: Windows DVD Maker does not recognize the MTS format.
  Camera: Panasonic DMC - TZ7
  File format: MTS (AVCHD Lite HD)
  OS: Windows 7 x 64

  There are a few comments on the similar topic. I would like to know if there is some way I can get the creation of DVD to read MTS files without converting it to other formats.

  If I convert it, is it a tool of MS that I can use without buying a third-party tool 3. MTS format has been around for a while and I'm surprised that the creation of DVD in Windows 7 does not support.
  Vimal.

  Hello

  You must first convert AVCHD (.mts) .avi files or any other file format and then burn using Windows DVD creation. Create DVD does not recognize the format .mts and
  There are no Microsoft tool to convert the file formats.

  I suggest you to search using your favorite search engine. You will find many free online conversion tools.

  You can also check out this link of the thread to help:

  http://social.msdn.Microsoft.com/forums/en/accLabs/thread/908e52d0-EC01-4D5E-9ab5-62cdb37b24f6

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• By selecting the MTS files in Windows Explorer hangs 64-bit Windows 7

  I have a Canon VIXIA HF100 HD camcorder which produces MTS files on a SD memory card.  When I plug the SD card in my PC, I see the files listed in Windows Explorer.  When I click on one of the files, my computer freezes.  Totally inadmissible, including the mouse.  My first thought was a defective material, but I was able to copy the files to another computer and put them on a USB key.  When I plug the USB into my computer and try again to select a MTS file, I get blocked again. Then as I tried to turn off the preview feature icon, thinking it was a codec problem, trying to extract the thumbnail view.  This did not help.  I don't see anything else to do.  What happens when I select a file in the Explorer?

  Hey Joe,

  your CPU has a BUS [1] issue

  Severity: Fatal (1)
  Length: 928
  Creator: Microsoft
  Notify the Type: Machine Check Exception
  Timestamp: 2010-09-14 20:18:50
  Flags: 0x00000002 PreviousError

  ===============================================================================
  Section 0: Generic processor
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa800499b978
  Article @ fffffa800499ba50
  Shift: 344
  Length: 192
  Flags: 0 x 00000001 primary
  Gravity: Fatal

  Proc. Type: x 86 / x 64
  All Instr. : x 64
  Error type: BUS error
  Operation: generic
  Flags: 0x00
  Level: 3
  CPU version: 0x0000000000100f52
  Processor ID: 0 x 0000000000000000

  ===============================================================================
  Section 1: x 86 / x 64 specific to the processor
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa800499b9c0
  Article @ fffffa800499bb10
  Shift: 536
  Length: 128
  Flags: 0x00000000
  Gravity: Fatal

  Local APIC Id: 0 x 0000000000000000
  CPU Id: 52 10 00 00 08 04 00 0f - 09 20 80 00 ff fb b 8, 17
  00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

  Proc. Info @ fffffa800499bb10 0

  ===============================================================================
  Section 2: x 86 / x 64 MCA
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa800499ba08
  Article @ fffffa800499bb90
  Shift: 664
  Length: 264
  Flags: 0x00000000
  Gravity: Fatal

  Error: BUSLG_OBS_ERR_ * _NOTIMEOUT_ERR (Bank 0 4 Proc)

  Look at this topic:

  http://dmoisan.spaces.live.com/?_c11_BlogPart_BlogPart=BlogView&_C=BlogPart&partqs=cat%3DWindows%2520Internals

  and you can see the user had this, too, and in his case, the motherboard is damaged. In order to check your Board, too.
  

  [1] http://en.wikipedia.org/wiki/Bus_%28computing%29

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• RIM-COD-SHA1 value to the jad file will not be checked during the on air download

  Hi, expert,

  I'm trying to see if the 2 following properties espeically the sha1 either activated or not during the over-the-air download of my aplication:

  RIM-COD-SHA1: 8 b 11 58 and 6 d 94 ee 4 c 94 27 09 57 95 1 b 1 c 80 2 b 45 38 f8 f7
  RIM-COD-size: 68020

  So I modified the value of sha1 of my jad file, to my surprise, actually the download will not check it at all and download was successful.  Actually the RIM-COD-size value is not matching the actual size of the cod file so. I suppose it could be due to some extra bytes added by signing. It is perhaps because of the same reason do not check the sha1 as well.

  But with all this, how BONES would be able to check the consistency between the JAD file and cod in case a COD file is corrupted? From my reading on the web, the sha1 is checked which is different from what I've seen during my obvious tests.

  Moreover, for on the airflow, after the signing, in fact we still use a single COD file that is in the results expected/standard eclipse folder (there is also one of expected/web results, but we don't use it) and then we rename the file .zip and extra cod all these cod file the zip and put all these cod and jad file on our server.

  I'm doing sth wrong here?

  Signatures added at the end of a COD file are not included when calculating the value of SHA1.  It is expected that the SHA1 of the JAD file values remain the same after the signing.