The name of the application of a few Momentics

Similar Questions

• Several applications have frozen or stopped working after connecting to the server for a few minutes

  Hi all

  I am facing the problem with my windows server 2012 R2. After I connect to the server and leave it there for a few minutes:

  • Some of system applications such as device, power, system, etc. Option Manager are stopped working. When I opened them, I have nothing.
  • All my applications c# (.Net Framework 3.5 ~ 4.5) was an error 'could not load file or assembly 'my_reference_libraries' or one of its dependencies. The system cannot find the specified file. ». I'm sure that's not the error I can run the application correctly before this problem occurred.
  • When I open "Manager configuration SQL Server 2014", I get the error "the instruction at 0x0023ae20 referenced memory at 0 x 00000058. The memory could not be read. »

  Strange thing is when this is the case, I can open "Event Viewer" and after opening, everything back to normal. I can open applications, including my c# programs without any error. It's not just my guess that I tried this work many times. Opening every time the "Event Viewer" has solved the problem. There may be other applications system who will be doing that job, too, but I have not tried everything.

  In case the Viewer, I got tons of errors for:

  • GroupPolicy - Group Policy processing failed. Windows could not apply the policy settings based on the register of the LocalGPO Group Policy object. Group Policy settings will not be solved until this event is resolved. View the event details for more information on the file name and path that caused the failure.
  • DistributedCOM - the server {06622D85-6856-4460-8DE1-A81921B41C4B} is not registered with DCOM within the required time.

  What could be the problem? My user session froze? I get trouble solving this for several weeks already and still got no chance.
  Any help would be greatly appreciated!

  Please advise!

  Thank you and best regards!

  Hello

  Any recently installed application? Examine the cpu and memory use?

  Let me you suggest reviewing your material, including memory. Added new hardware recently? A updated driver recently? Please update hardware drivers.

  The following forum might be more appropriate for your question:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  I hope this helps.

  Kind regards

  Alberto Morillo
  SQLCoffee.com

• LOOK for iOS 3.1 - name of the application is more work?

  I named my "123 Someapp" app and mysteriously enforcement falls permanently "123" in the name part. It was very good.

  Yesterday, I noticed AIR3.1 was released and I bunk which. Someone at - it superimposed on the other AIR3.1? Note the name of your app does not completely work?

  FWIW, it's an iPad only app. This provision clearly states that the name of the application is "123 Someapp". In the AIR for the parameters of the IOS, I have "App name" parameter set correctly as well.

  Hi sinister:

  Can you please provide the following information in your descriptor of the App.

  1. the value of the name tag

  2. tag filename value (I guess it should be "Someapp" without 123)

  3 have you located the name of tag values?

  3.1 AIR the behavior is as follows:

  1. the name of the application (which is indicated on the device) comes from the value of the filename tag. Given the point 2 is not used by your application.

  2. If the value of the name tag is available in several languages (as described in http://help.adobe.com/en_US/air/build/WSD079A3A2-1B38-4543-A792-06594E4325FE.html ) then this value is used as the display name of the application. and the correct value is chosen according to the location of the device

  For example, you can change the values accordingly. If you find a few different behaviors post back please.

• Name of the application server on window

  Hello
  Is it possible to get the name of the application server somehow during the execution of a form (Forms 10 g 2). We want to show in a matter of window.
  Is see no possibilities get_application_property or webutil functions that can do the job.
  
  Best regards Erik
  
  Published by: Erik Trip - Darwin THERE on November 25, 2009 08:29

  There are several ways in which it can be done. However, the exact way depend on the platform and the method you prefer. Here are a few options:

  OPTION 1:_
  Create a variable in default.env which contains the host name. For example:

  Host name = myMachine

  In your form, you can retrieve this value by using the following:

  TOOL_ENV. GetVar ("HOSTNAME", unevariable);

  OPTION 2:_
  Get the information from view V_$ SESSION. Needed to use this method, users CHOOSE to view or you can create your own. For example, something like this:

  Declare
       the_host     varchar2(255);
       this_user     varchar2(255);
  Begin
       this_user := GET_APPLICATION_PROPERTY(USERNAME);
       select distinct machine into the_host from v$session where username = this_user and program LIKE 'frmweb%';
       MESSAGE (the_host);
  End;
  

  OPTION 3:_
  Import the necessary java into your application and call it to retrieve the host name. There are many examples of java code on the Internet.

  http://www.Google.com/search?q=Java+get+hostname

  Be sure to compile the code using the version of java used in the version of the application server that you are using. Here are the versions of java:

  10.1.2 application server: use JDK 1.4.2
  Server applications (FMw) 11.1.1: use JDK 1.6.0

  If you try to compile the java with a newer version than the version used by the Oracle Home, your code may not work correctly or may not import correctly into the form.

  There are probably many other ways to accomplish what you want. I hope this helps :)

  Michael Ferrante
  Senior Principal Support Engineer
  Global Technical Manager of forms
  Oracle USA

• Downloaded Firefox twice with the name as a result of the application called Setup SFX 7z and the vendor name is Igor Pavlov.

  I have Windows 7 SP1, Internet Explorer 11, KIS 2015.

  After downloading Firefox from https://www.mozilla.org/ , the foregoing showed when I analyzed the virus file and selected check reputation in KSN. I deleted this file. Then reinstalled Firefox thanks to English (United States) in the language pack site. He showed the same information in the application and the name of the seller. I deleted this file as well. Why it would show that information rather than Mozilla file information? Help, please. Thank you very much.

  Try the full installer, offline.
  https://www.Mozilla.org/en-us/Firefox/all/

• I can't open firefox. Here are the details of the problem. Problem event name: APPCRASH application name: firefox.exe Application Version: 23.0.1.4974 app

  Problem event name: APPCRASH

   Application Name:	firefox.exe
   Application Version:	23.0.1.4974
   Application Timestamp:	520bc252
   Fault Module Name:	ntdll.dll
   Fault Module Version:	6.0.6002.18881
   Fault Module Timestamp:	51da3e27
   Exception Code:	c0000005
   Exception Offset:	00066448
   OS Version:	6.0.6002.2.2.0.768.3
   Locale ID:	2057
   Additional Information 1:	bfef
   Additional Information 2:	e8adce1c2b9e7be834b4063ac3c53863
   Additional Information 3:	bfef
   Additional Information 4:	e8adce1c2b9e7be834b4063ac3c53863
  

  Read our privacy statement:

   http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
  

  See if you can locate the program that belongs to the bitguard dll and uninstall this program.

  • http://windowfdb.com/q.php?q=BitGuard-dll-c-ProgramData-BitGuard-2-6-1673-238-c16c1ccb-7046-4E5C-CT
  • https://crash-stats.Mozilla.com/report/index/5f71232c-2ba3-4053-AB4D-5c8932130915

  This could also be a problem with the report of Trusteer

  • http://www.Trusteer.com/support/rapport-installation-links
  • http://www.Trusteer.com/support/en/report-problem
  • http://KB.mozillazine.org/Firefox_crashes#Trusteer_Rapport

  Try to update or uninstall and reinstall Trusteer report and if that does not help then disable/stop the program for now.

  • Start menu > programs > Trusteer report > stop report

• Is there a way to remove the ToolTip that contains the name of the application when the cursor over the icon in the dock?

  Since the upgrade to El Capitan, I noticed that the name of each application in the dock appears above the docking station in a bubble of large text when the cursor is everywhere down in the dock next to this icon of the application.  It's annoying because if I'm often pass between two or several applications, I don't want to have to keep moving the slider to the top of the screen to get the text balloons to disappear.  When the application names are present, they cover part of the screen of the app that I work.  Not sure if I remember correctly, but I thought that those who went after a period of time in older versions of OS.  I was never bothered by it as I am with El Capitan.

  Thank you all.

  Not that I am aware, no.  There is nothing in the system preferences-> Dock that allows you to disable or remove this function.

• El Capitan: Cannot open the application "app name" because it may be damaged or incomplete

  Came across this several times. After you initially upgrade to El Capitan 10.11.2, after logging into my main account (admin), I was not able to open applications and received the following error:

  "Cannot open the application name"app"because it may be damaged or incomplete."

  I couldn't open "Activity Monitor", "System Preferences", "Finder" or anything (provided, App Store or other system). The icons will revert to the default application icon. Other users have no problem with the same apps.

  After the panic, I found a solution: go to another admin account, delete the old user account, and then add it again. This version corrects the problem of this user; It apparently rebuilt the user for that user identity information, while leaving their home folder (and preferences, documents, key rings, etc.) only. iCloud information must be re-entered, but it is trivial. Once the user delete and add, I was able to run these applications.

  When I upgraded to 10.11.3, it is the same thing, but to 3 accounts. I managed to solve this problem through the guest account - that is, I was still able to authenticate as an administrator, but I could not open a session and run anything.

  El Capitan removed permissions repair; I think it can be done in the recovery console, but I shouldn't do that.

  No idea why this continues to be?

  Generally to searching for the above error message is specific to applications from the App Store or other, not about things like "Activity Monitor" and "System Preferences."

  You now have this problem?

• List of open and active/Windows Forms displayed within Windows XP 7 v/s windows on the right by clicking on the name of the application in the status bar

  Salvation OR,.

  We found that the list of forms/open windows displayed in Windows XP (on the right by clicking on the name of the application in the windows taskbar) seems to indicate all open and active windows/forms in the application.

  We would like to know how to enable the same functionality in a Windows 7 environment. The best we can do now is to double click on the name of the application on the windows taskbar to switch between active windows/Forms in the application. We would like a menu similar to the windows XP appearance about running on Windows 7 when it comes to this particular feature.

  Thank you and best regards,

  -Ashish

  The taskbard has changed significantly in Windows Vista and 7. You can get a similar functionality to what you call by customizing the taskbar in the taskbar properties. In addition, now press SHIFT key while right-clicking to display a menu similar to what you show in your screenshot, except that it does not display the name of the element. In Windows 7, the feature make you is typically done by hovering over the icon in the bar tasks and selecting one of the points of view which appears above the element.

  You can use the Windows shellapi to do a limited customization of the task bar, but this API is very difficult to use and I would not recommend this approach.

  CVI provides a method to change the name of the item in the taskbar (see this KB), but it does not add the name after the restoration in the context menu.

• The CPU usage rises, more than a few hours until the application crashes

  I wrote an application to control the antennas of the ship. I met all the requirements of the customer. However, when I run my application the CPU starts around 13% (depending on the mode) and slip about 5% every 30 minutes, until finally the use reached 100% and not surprisingly the application stops responding.

  My application communicates with the antenna via the serial connection. I have an interface for a remote connection via the local area network that uses the TCP protocol and I broadcast UDP packets on the local network for use by other ship systems (sharing data such as ships Cap etc.). The 3rd party who wrote the remote application used my UDP broadcast as a way to receive data from my application.

  My application has several vi. Should I these zip and attach?

  Any help or pointer as to why its use goosebumps would be welcome. My initial feeling is that a buffer is full to bursting, but where and who? I use tax filers to communicate between the loops and have a few global variables that communicate my menu selection.

  Thank you

  Steve

  Steve S of a. in writing:

  It is certainly my application.

  I noticed that I got from reporters that contain groups inside a loop and have not released. If the Notifier is created each iteration and not released, this would cause the problem?

  WELL YES!

  Resources should be allocated (created declarant) before the loops, then a ref use din the loop. Only when the loop is complete must it be closed.

  Your zip code if you want us to look more closely.

  Ben

• Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".

  Hello

  I have a PC running Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".
  When I have this message, I can't open another application, or those in Windows... I have 2 GB of memory and only 700 MB are used.
  If I open the calculator several times (about 65 times), I have the same result.
  Sometimes, I get no error message, but the application does not open.

  Someone knows why?

  Thank you

  Hello

  You did the chnages on computer before this problem?

  I suggest you go through the steps of the following atrticle.

  "Not enough memory" error message appears when you have a large number of programs running.

  http://support.Microsoft.com/kb/126962

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows.

• The application name does not change in 2.0 WebWorks

  Hello

  I changed the name of the application in the config.xml file in the www folder. But when I reinstall the application again, the application name does not change. Removal and installation of new but certainly not it's always the same thing with the default name which is «WebWorks app» What is the problem? I couldn't change it.

  Thank you.

  Hello

  It is a known issue with version beta. The name and the icon is changed in the file of the bar, but persists on the device. If you have to deploy the same file on another device appears the correct name.

  The solution is to change the code of the widget as well.

  This will be fixed in the Gold release.

• reproduce the error login name and after application crash

  Hello

  I have attached the code that generates the duplicate connection name error and after they crash the application.

  Note :-in app when you press tab 3 at that point they extract data and once you press tab 3 then app crash,.

  So please update me as soon as possible.

  Thank you

  Umang.

  Still awaiting response that you will find attached code or I also include the code here

  QML

  // Default empty project template
  import bb.cascades 1.0
  
  TabbedPane {
      id: tabMeniuNavigation
  
      //showTabsOnActionBar: true
      Tab {
          title: qsTr("All")
          id: tab1
          Page {
              Container {
                  // define tab content here
                  Label {
                      text: qsTr("Tab1")
                      horizontalAlignment: HorizontalAlignment.Center
                      textStyle {
                          base: SystemDefaults.TextStyles.TitleText
                      }
                  }
              }
          }
      }
      Tab {
          id: tab2
          title: qsTr("Tab2")
          Page {
              Container {
                  // define tab content here
                  Label {
                      text: qsTr("Tab2")
                      horizontalAlignment: HorizontalAlignment.Center
                      textStyle {
                          base: SystemDefaults.TextStyles.TitleText
                      }
                  }
              }
          }
      }
      Tab {
          id: tab3
          title: qsTr("Tab3")
          content: Page {
              Container {
                  ListView {
                      objectName: "otherNoteListView"
                  } // ListView
              }
          }
          onTriggered: {
              app.medicialListData();
          }
      }
      Tab {
          id: tab4
          title: qsTr("Tab4")
          Page {
              Container {
                  // define tab content here
                  Label {
                      text: qsTr("Tab 4")
                      horizontalAlignment: HorizontalAlignment.Center
                      textStyle {
                          base: SystemDefaults.TextStyles.TitleText
                      }
                  }
              }
          }
      }
      Tab {
          id: tab5
          title: qsTr("Tab5")
          Page {
              Container {
                  // define tab content here
                  Label {
                      text: qsTr("Tab5")
                      horizontalAlignment: HorizontalAlignment.Center
                      textStyle {
                          base: SystemDefaults.TextStyles.TitleText
                      }
                  }
              }
          }
      }
      onCreationCompleted: {
          // this slot is called when declarative scene is created
          // write post creation initialization here
          console.log("TabbedPane - onCreationCompleted()")
  
          // enable layout to adapt to the device rotation
          // don't forget to enable screen rotation in bar-bescriptor.xml (Application->Orientation->Auto-orient)
          OrientationSupport.supportedDisplayOrientation = SupportedDisplayOrientation.All;
      }
  }
  

  CPP

  // Default empty project template
  
  #include "FindMedicin.hpp"
  #include "customListMedicinitemfactory.h"
  
  #include 
  #include 
  #include 
  #include 
  
  using namespace bb::cascades;
  using namespace bb::data;
  
  FindMedicin::FindMedicin(bb::cascades::Application *app) :
          QObject(app) {
      // create scene document from main.qml asset
      // set parent to created document to ensure it exists for the whole application lifetime
      QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
      qml->setContextProperty("app", this);
  
      // create root object for the UI
      root = qml->createRootObject();
      // set created root object as a scene
      app->setScene(root);
  }
  
  FindMedicin::~FindMedicin() {
  
      QSqlDatabase::removeDatabase(mDbNameWithPath);
      delete medicinListView;
      model->registerUserData();
  
  }
  
  QString FindMedicin::copyFileToDataFolder(const QString fileName) {
      // Since we need read and write access to the file, it has
      // to be moved to a folder where we have access to it. First,
      // we check if the file already exists (previously copied).
      QString dataFolder = QDir::homePath();
      QString newFileName = dataFolder + "/" + fileName;
      QFile newFile(newFileName);
  
      if (!newFile.exists()) {
          // If the file is not already in the data folder, we copy it from the
          // assets folder (read only) to the data folder (read and write).
          QString appFolder(QDir::homePath());
          appFolder.chop(4);
          QString originalFileName = appFolder + "app/native/assets/" + fileName;
          QFile originalFile(originalFileName);
  
          if (originalFile.exists()) {
              // Create sub folders if any creates the SQL folder for a file path like e.g. sql/quotesdb
              QFileInfo fileInfo(newFileName);
              QDir().mkpath(fileInfo.dir().path());
  
              if (!originalFile.copy(newFileName)) {
                  qDebug() << "Failed to copy file to path: " << newFileName;
              }
          } else {
              qDebug() << "Failed to copy file data base file does not exists.";
          }
      }
  
      return newFileName;
  }
  
  //Find Pharama
  void FindMedicin::medicialListData() {
      CustomListMedicinItemFactory *otherNoteItemFactory =
              new CustomListMedicinItemFactory();
      qDebug() << "MediaList Data Called.";
  
      // create a data model with sorting keys for firstname and lastname
      model = new GroupDataModel(QStringList() << "field1");
  
      mDbNameWithPath = copyFileToDataFolder("sql/FindMedicin.db");
  
      // load the sql data from contacts table
      SqlDataAccess sda(mDbNameWithPath);
  
      //sda = new SqlDataAccess(mDbNameWithPath, this);
      if (sda.hasError()) {
          DataAccessError err = sda.error();
          //DataAccessError* err = sda.error();
          qWarning() << "SQL error: type=" << err.errorType() << ": "
                  << err.errorMessage();
  
      }
      QVariant list = sda.execute("select * from medicin_detail");
      // add the data to the model
      qDebug() << list.value();
      model->setGrouping(ItemGrouping::None);
      model->insertList(list.value());
      // create a ListView control and add the model to the list
      medicinListView = root->findChild("otherNoteListView");
      medicinListView->setObjectName("");
      medicinListView->setDataModel(model);
      medicinListView->setListItemProvider(otherNoteItemFactory);
  }
  

  more code as an attachment.

• How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  Here is the error

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 219949
  Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
  Info: Treatment 219949 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 881 the application author does not match the author token of debugging

  The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

  If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

• How to change the icon/name of the application AppGenerator

  Hi all

  I registered for the last chance port a tuna.

  I did the application of the "appgenerator".

  My two apps refused due to app name and the icon of the application.

  I changed in the portal provider, but it shows only drafts, even I tried for the button ' Send for review ', but inside ther 'submit for review ' button display off !...

  Please help me... because of this, my reward obtained in waiting!

  Thanks for the reply!

  I found the solution (single)

  I sent mail to appgenerator help desk!

  You know? MIPPIN appgenerator HELP IS TOO FAST THAT BB CUSTOMER SUPPORT DESK *.