The NAS can be turned on without a disc?

Similar Questions

• When start the computer can be turned on but nothing happens

  Original title: computer does not start

  Hi all

  Have a dual processor Intel running Vista with 2 GB of memory.

  When start the computer can be turned on but nothing happens. That is the screen is not lighting, brief flashes KB on and nothing. I hae take the drive HARD case and implemented it is powered, but there is no sign that it is accessed at all when the machine is running. It seems that ot could be the HARD drive, but I think that there is a rom on the motherboard, which is accessible in the boot process and I wonder if this could fail. I don't have a spare drive to test what happens then is anyway I can be sure if I need new hard drive or m/Board?

  While on the question - if I need a HARD drive, Vista is the one that crashed and I do not have a Cd with the machine when I bought it. Nor has created a cover of one! I have an old XP Pro upgrade disc and an original copy of Windows 2000 (so I can switch to XP). This is my best option? I can't afford £ 140 for Windows 7.

  Hi Eddie,.

  Since this is a hardware problem, you should contact your computer manufacturer or a hardware technician to understand the defective material.

  And also, since Windows Vista was preinstalled on the computer you must consult the manufacturer of the computer for resettlement or a recovery DVD.  Also survey about data recovery on hard drive crashed.

• Can I turn off my iphone just in the unlocked position? That's the thief can't turn off my phone so I can use find my phone

  I lost my phone and I use find my phone but in offline mode. How my iphone cannot run for the lock?

  The most you can do is put the device in the mode of 'Lost' - if it is connected to the internet service or cell - locking will take effect

  (1170)

• What dependency service or group must be enabled for ICS start the firewall can be turned on

  Uninstalled BitDefender 2012 and installed Microsoft Security Essentials.  I tried to activate Windows Firewall and got: "Windows Firewall setting cannot be displayed because the associated service is not running. You want to start the Windows Firewall / ICS (ICS) service. Press Yes and I get Windows cannot start the Windows Firewall / ICS (ICS) service. This option is OK. Hit that and I will return to the window Security Center in Control Panel. Tried to manually turn on ICS and got error 1068: the dependency service or group could start. What service and / or the Group?

  It was more than a notice of an answer to the question I posted earlier to not be able to activate Windows Firewall once I uninstalled Bit Defender and installed MS Essentials.  Sorry that if I crossed all the protocols forum this is my second attempt to get a question an answer, luckly I kind of figured it by myself.  Thanks for the response if and the offer of future assistance.

  I you merge your two threads, but your problem is perhaps due to incomplete removal of BitDefender.

  -steve

• I am able to bind the text fields in Photoshop or InDesign model to a database so that the model can be updated dynamically without having to enter copy each time?

  Morning, all the

  I have a client who I want to design a model for a series of financial reports that go to investors every quarter. Information for reports from a database. There are 50 reports to be created for each investor. Rather than having to copy and paste the information manually from the database directly into text fields in Photoshop or Indesign, it is possible to bind the text boxes to this database?

  I was going to use Photoshop to design the model that I'm not very good at InDesign. But if I have to then I'll use InDesign.

  Would like any suggestions that I can not find an answer > thank you very much

  Both programs were given to merge. InDesign would probably work best for what you want to do, but you might be able to get away with PS:

  Using Photoshop | Create graphs based on data

  Using InDesign | Data merge

• I try to activate my new 6s phone my old phone 4S. Almost everything seems to be transferred, but the wheel can now turn for more than 24 hours. Should I unplug and hope for the best?

  I've used icloud to transfer old 4 sec to 6 sec new phone but then tried to use the itunes backup. It has been run for more than 24 hours and seems to be stuck. Should I unplug the computer and stop the process?

  a bit of luck with your 6s still?

• Can I install CS3 without a disc? Key register.

  My old laptop crashed, and of course after my move, I can't find my cs3 disks.

  I have my key to series written by Adobe (appears in my "sign-in" info when I log on the website) and all.
  I tried to find the files to download on the site but it kees throwing me at cs6 well, I just can't justify this money when I got cs3...

  Thanks for the help in advance. I thought, I'll try to contact adobe by e-mail but apparently I can't do and call waiting time is obnoxious and the link to the cat apparently 'a ΘtΘ supprimΘ' whenever I click on it... Sigh.

  Check here: -.

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

  This could help, also read the instructions on the page to avoid any mistake.

• How can I reinstall items without a disc

  I had problems with items 9 and decided to uninstall it.  After doing this, I realized and was upset with myself, that I had downloaded it and do not have the disc.  Is anyway to reinstall?  I'll be really upset with myself, if I have to buy another copy because I don't check this first.  Thanks for any help you can give.

  If you have bought from the Adobe store, details are usually available for three years from the date of purchase.

  Click on the Red Adobe logo at the top left of this page of the forum.

  Then click on My Adobe > my orders

  Sign in to your account using your Adobe ID.

  Expand your purchase history using the small black triangles to the left of the date of purchase, and if a download is still available for your product it will be shown to the right.

• can I reinstall vista without installation disc

  Ive lost the installation disc toshiba satellite

  Hello

  read the information below

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  also ask them if you also have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• NB520 - Wifi and Bluetooth works fine but can not turn off

  I bought new toshiba nb 520, almost everything is OK except wifi and bluetooh on the netbook cannot be disabled

  I tried FN + F8 to activate the wifi but it does not work at all, the only way to turn off the wifi windows 7 uses the device for disabled Manager

  is not everything, bluetooth has the same problem, yes it can be turned off by free config and turn a red light icon in the system tray to show bluetooth is in the off State, but after 2-3 seconds the light become blue and the bluetooh is on

  so the summary is
  WiFi = works correctly, but cannot be disabled, except disabled it the windows Device Manager
  Bluetooth = works correctly and can be disabled, but it will be swicth on automatically in 2-3 seconds after it turns off

  I have tried many solution, I had the netbook bios update, reinstall the driver but still no luck
  can anyone here help me

  Hello

  It's really, really strange, I mean the BT and the Wlan can be turned on and off using the Fn + F8 key combination. He s strange that it does not work.

  To my knowledge the Fn buttons are controlled by VAP (value added package) and the Support of additional Flash memory card utility BT stack and Wlan driver must be installed.
  I would recommend following:

  -Uninstall the driver Wlan and BT stack
  -Uninstall the VAP and utility of Flash card support
  -Install CCLeaner and clean the registry (CCleaner is a free tool)
  -You must restart the computer after each step.
  - Then reinstall the driver Wlan and BT
  -Restart and install VAP and Flash cards
  -Restart the unit and check if BT and Wlan can be enabled and disabled.

  NOTE: Fn + F8 should be pressed several times disabled these functions.

• Can you have SMU 1062 q turn on without using the power button

  I use a q SMU-1062 for a test project that will take place inside a protective case.  The power button on the chassis will be covered by a plate on the protective case that make it boring and difficult to switch on using the power button on the chassis.  The chassis will be plugged into a power strip of travel - lite which is mounted in the case.  Is it possible that I can have the power to frame on when I turn on the power strip?

  I found another route.  In the controller BIOS, I changed the parameters of loss of AC power to TURN on after that AC is returned.  This allows me to use the power strip in my configuration to control the electric network distributed to the controller.  The following steps will describe how I got this.

  1. Power of the SMU-8115 controller.
  
  
  2. A message will appear on your screen, press to enter SETUP
  
  
  3. Select 'Remove' (quickly, because you don't have a lot of time before the window disappears and the controller continues to load normally.)
  
  
  4. This will open the main Menu of the BIOS
  
  
  5. Select the Advanced tab (use the arrow keys to highlight the selections and the different tabs, select a setting change with 'enter'
  
  
  6. Select > Configuration power and rest
  
  
  7. Change the configuration to power on when power is restored.

  The controller can be normally close by using the start menu, and "shut down".

  Start button / stop of the chassis is still capable of turning the power on to the controller, but now when I shut off the AC power strip and then return power, get the controller chassis.

• Can you turn off the shutter sound on the factory unlocked iPhone to the Japan 7?

  Can you turn off the shutter sound on the factory unlocked iPhone to the Japan 7?

  I am going to Japan November 2016 and plan to buy unlocked (no sim) iphone to use in my country (Thailand) 7.

  However, I have read some post on 'mode of politeness' in Japanese phone but the conclusion is not clear whether you can disable shutter sound (without sim) unlocked iphone 7 or not. Then, someone could share on the current situation?

  Thank you

  No, its required by Japanese law shutter. Even if the iPhone is

  is no longer in Japan, you will not be able to turn off the shutter sound.

  You should also check with the seller to be sure you can get the

  iPhone unlocked from the Japanese wireless provider to use with your

  carrier in Thailand. And check that the iPhone is unlocked before leaving the

  retailer.

• How can I get the user of Firefox 28 interface without extension?

  Anticipate the Australis update, I have set my browser to NOT automatically update, but there anyway. (which I am quite peved on) When updated firefox updated to 29, I tried the new surprising interface and was very upset that I could not put my navigation buttons in the tab bar. When I installed the addon for return to the old interface, it helped me (with great effort) to solve a lot of problems, but I still couldn't put my buttons where I had them in firefox 28. Is it possible to easily return all my computers synchronized to 28 without them to date each other? I switched to chrome for now, and I hope this blows over soon so that I have cause to return to firefox.

  I feel like I've answered this question already

  There was a previous way by going into the Options menu to turn off updates, but after this, when you go to help > on Firefox, it would update regardless of this setting.

  You can set these prefs in about:config to turn off the automatic update:
  
  App.Update.auto - false
  
  App.Update.Enabled - false
  
  App.Update.Silent - false

• How can I turn on turn off (and on) the incognito in Version 28?

  How can I turn on turn off (and on) the incognito in Version 28? Seems to be permanently on the private browsing mode. I would like to be able to choose which mode on the fly without addons. All the help I've seen so far, is for older versions of Firefox. I use the 28 Version. Which seems to be the latest version from here.

  You can check that you are not running Firefox in permanent private browsing mode (don't remember history)?

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • Uncheck the box: [] "always use the navigation mode private.

  You can check the target line in the shortcut to the Firefox desktop (right click: properties) to make sure that nothing is added after the path to the Firefox program.

  • https://developer.Mozilla.org/Command_Line_Options

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• How can I turn off the mobile mode.

  I have a 10 nexus, which, with a 10 "screen, isn't really a mobile device. Unfortunately, Firefox is indicative of the web pages that it is. Given this information, some web pages redirect to a short page. Turn on "site office request" does not work since I'm no longer on the site I want and this button is not persistent. So the question: How can I enable notification of mobility?

  Hello

  Please try to change the user agent.

  To change the User Agent string, just enter about: config as an address in the address bar of FireFox, where you normally enter a URL (link). I recommend you keep the original value, you can get when you enter about: in the address bar.

  Now press the right button of the mouse for the contextual menu and select 'Chain' of the menu entry 'new '. Enter the preference name "general.useragent.override", without the quotes. Then enter the new value of User Agent: "Mozilla/5.0 (Windows NT 6.1;". Win64; x 64; RV:25.0) Gecko/20100101 Firefox/25.0 "(sans guillemets)."

  I hope this helps!