The necessary BIOS upgrade assistance

Similar Questions

• Update the necessary BIOS for Lenevo 3000 G530 on Windows 7 (32 bit)

  I searched the forum and found a topic, I also tried to Flash the bios of my self, but I was unable to do so.

  I downloaded 6get19ww.exe to download driver and when I tried to flash I got an error message saying: "cannot load the C:\DRIVERS\BIOS\6get19ww\PHLASHNT driver. SYS. Please verify that your accounts, if you have no administrator privileges, please sign in again! The error specified has been marked for deletion. Error code: 1072. "

  I tried to launch the updated bios update as an administrator, and I do all of this from an administrator account.

  I am running Windows 7 (32 bit) and would be highly appreciated if you guys can help out me.

  Thank you

  have you also tried to run the bios executable file by selecting "Run as Administrator" (right click > run as admin)

• HP Envy 17 t-j100 Notebook PC - HP BIOS upgrade Assistant. PC will not boot to the top.

  After reading the various posts, I solved the problem.  I disconnected the power and removed the battery.  I then reinsert the battery connected the power cord and press the power button.  Update the BIOS 'recovered', continued, and the system finally started.  I was able to enter my password and the system works normally now.  I'm not a computer expert, so this experience was really scary.  I hope that my solution helps someone else.

  McTavish2012,

  Support from your computer - a LOT of good information here pages: manuals, drivers (there is more that you need - compare with what you see in the control panel > display icon > Device Manager), troubleshooting...

  all kinds of "stuff".

  You must select your exact model and there you go!

  Series of Quad Edition Notebook PC HP ENVY 17-j100

  I have my Windows as well updates the value of Notify - this way, I get to decide when I want to actually install the updates.  Just a personal whim.    I always create my own restore Points before making changes, too. the computer should do, of course, but I learned to do this on my own.  You can do it whenever you like - just give it a name and it will be there when you want later.  Don't get carried away, though - just so many of them and they take a little space.

  ·         Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8

  Just for fun - Dragon's Document:

  Features of Windows 8 - a Quick Tour

  Happy computing!

  Return at any time-

  Search for any topic of interest to see what others say or ask a question.

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Click on accept as Solution when the answer is a good solution or workaround!

  Although I strive to reflect best practices of HP, I do not work for HP.

• Joshua-H61-Μatx - update the necessary Bios for CPU Upgarde - Sandy to Ivy? (HP P6-2260EA)

  Hello, I have a mother board Μatx-H61-Joshua. (It's a P6 PC - 2260ea HP)

  You need a BIOS update.

  When it says that a CPU is supported in the motherboard specifications document, this means that the BIOS support is already present.

  

• Satellite U400 - 112 (PSU40E) - Safe BIOS upgrade - SOLUTION

  Dear all,

  Trying since long upgrade for the bios of my laptop favorite... Toshiba Satellite U400-112 (PSU40E)
  I have Windows 7 Ultimate (64-bit) English and BIOS version 4.00(until yesterday).
  The problem was that, in windows 7 (32 & 64 bit), the tool flash never started the process of update due to several incompatibilities.
  There is a solution (in fact a workaround solution) to be honest and works 100%!

  My solution is:

  (A) download the latest bios upgrade version appropriate for your laptop, save it (tomake it is easier in the root of the C:\ drive) and unpack it in a temporary folder (for example: bios).

  (B) use the Hiren's Boot CD a real support from a USB or CD (download and burn a CD or follow the process of CD copy on a USB key).

  (C) boot the laptop from the CD or USB flash and in Hiren's Boot Menu, select the version of mini Windows XP.

  (D) allow completely Windows XP startup and then run the tool to update the bios flash from the temporary folder. The update procedure make it exactly as it is described in the manual of the bios update. (If you are not experienced)

  (E) it will update the bios, and then he stops himself. Then you can start normally your operating system, remove any CD or USB key mounted on it.

  I hope you find it helpful and convenient.

  Best regards

  Ioannis

  To be honest I updated the BIOS on my U400 (running Win 7 32 bit), A210 (Vista) and Tecra A10 (Win 7 64 bit) using the victory as the BIOS version and never had any problems in running the tool
  Anyway thanks for sharing your knowledge with the community

• Tecra 540 - BIOS upgrade?

  I am the owner of Tecra 540.
  Details:
  Tecra 540CDT/4.0 system UNIT; Z7013615 model number.

  I just downloaded the latest BIOS for this notebook (bios - 20071126170622.zip)

  Two files inside:
  CHGBIOSA. EXE
  BIOFCE7T.COM

  Now I'm looking for a way to Flash the BIOS. This machine has a floppy but CD player.
  I was looking at the Toshiba site where 'How-to' for upgrading the BIOS is described for one of Toshiba laptops, but not my :(
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  Can you get it someone please let me know what steps I have to upgrade the BIOS more recent?

  Hello

  On the page of the driver Toshiba Tecra 540 section, you will find two packages of BIOS.
  A package 8.00 - TRAD BIOS contains an exe BIOS Tecra 540 and some pdf documents that described how to upgrade the BIOS.

  In addition the document FAQ Toshiba + how to upgrade the BIOS on my Toshiba laptop and where can get the latest version of the BIOS for my machine? + provides a step by step instruction.

  Please check this last point * the 7 BIOS upgrade procedure *.

  It is said:
  For all models except those listed in the procedures (1, 2, 3, 4, 5, & 6)
  So if your model is not in the procedures at the beginning then you will have to use the last procedure 7

• I'm moving from Vista to Windows 7. I get a question that tells me that I need a BIOS upgrade. I have an Inspiron 1720 laptop model. Is there a way to find the update is necessary?

  I'm moving from Vista to Windows 7. I get a question that tells me that I need a BIOS upgrade. I have an Inspiron 1720 laptop model. Is there a way to find the update is necessary?

  original title: bios update

  Hello

  you have a problem here as Dell does not have Windows 7 drivers available for your model of laptop etc, etc.

  Unfortunately, you need these Windows 7 drivers, etc. to upgrade to Windows 7

  read the information on your laptop on the link below

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&OS=WLH&OSL=en&SystemID=INS_PNT_PM_1720&CATID=-1&impid=-1

  For more information contact Dell about this

  Dell support:

  http://support.Dell.com/

  Dell support at the link above.

  http://en.community.Dell.com/support-forums/default.aspx

  Dell's Support Forums at the link above.

• Satellite M40-276 - memory not detected in the Bios upgrade

  Hi people!

  New kid on the block!

  I have a client with a toshiba Satellite m40-276. I've updated his memory to give it a little more to play with...

  Went into the bios to see if everything was OK but no projected additional memory. I removed the new and old memory and put in the new 1 GB module and restart the computer.
  The bios has not yet changed the size of the old memory?

  Went to windows and of course that the memory has been detected it normally?
  I added the other memory module and went into the bios again, but no change it?

  Windows, however, recognized that the two modules?

  His computer is the same bios to factory and has never been updated.

  My questions are... why the bios doesn't recognize the upgrade memory? It will help in upgrading the bios?

  Enjoy all the suggestions I can get on this issue.

  Thank you

  bookie56

  Generally, if you upgrade RAM using tested compatible modules, that should be recognized correctly.
  We do not know what modules you use, and I guess that there is a compatibility issue.

  RAM on Satellite M40 276 can scale up to 2 GB of RAM and compatible modules are:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

• My Mac has said that I don't have the necessary permissions, (although I repaired permissions and checked that I am an administrator of this computer) for the upgrade - what can you tell me what the problem is? Mac 10.5.8

  My Mac has said that I don't have the necessary permissions, (although I repaired permissions and checked that I am an administrator of this computer) for the upgrade - what can you tell me what the problem is? Mac 10.5.8

  This has happened

  Each time Firefox opened

  I tried to upgrade to version 2.0

  User Agent

  Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en - us) AppleWebKit/533.16 (KHTML, like Gecko) Safari/533.16 Version/5.0

  See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
  .....
  If you have Mac OS X 10.5 or newer then follow these steps:

  Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
  Trash the current demand for Firefox to do a clean reinstall.
  Install the new version you downloaded.
  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

• Tecra M5: Are there special precautions with the Bios upgrade?

  Are there special precautions he takes while uprading BIOS. I'm just afraid because both failover system report people after the upgrade, is it true?

  Hello

  Of course you need a few special steps if you want to update the BIOS!
  The update of the BIOS is risky! If you use the bad BIOS or bad BIOS update procedure, you may damage the motherboard or module ROM BIOS!
  This is why you should always read the details of upgrading the BIOS before you start the update.

  Finally and above all many people update the BIOS without any reason. That s is really stupid.
  In my opinion you should not update anything if you have no problems!
  Therefore, never change a running system ;)

  You know the technical knowledge of Toshiba?

  http://EU.computers.Toshiba-Europe.com-> download-> Knowledge Base & support

  You will find many useful documents and also the BIOS updated Details

• I need the path necessary to upgrade to windows xp home edition office2000.

  I need the path necessary to upgrade to windows xp home edition office2000.

  Please see: Description of the Windows XP Upgrade Advisor Carey Frisch

• the upgrade from Win 7 to Win10 (upgrade Assistant) and get stuck on 99% for 8 hours.

  my laptop is acer aspire 5560 G with 6 GB of Ram DDR3, 750 GB HDD and amd quad - core processor A8 - 3500M with turbo core 2.40 GHz.
  and I have 250 GB of free space on the disk (C).
  can anyone help please?
  Thanks with regards.

  If the Upgrade Wizard of Windows 10 becomes blocked or unresponsive to 99%, wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• The ROMMON upgrade is necessary when upgrading ios in ASR1K

  Hi everyone can answer this question for me? Thanks in advance

  The ROMMON upgrade is necessary when upgrading ios in ASR1K

  The ROMMON upgrade is necessary when upgrading ios in ASR1K

  I'd do it.

  My logic is very simple: the IOS update requires a reboot, Yes?  The ROMmon update requires a restart.  So why not upgrade the IOS and ROMmon in a remake?

  I see really no operational reason DO NOT upgrade the ROMmon.  It must, in all cases I've seen, 20 seconds to upgrade the ROMmon.

• Windows 8 Upgrade Assistant does not not in the United States

  I have tried every day since the launch of Windows 8 to upgrade by using the downloadable Windows 8 Upgrade Wizard, however, whenever I get to the billing information page, the prefecture of the Province/State/drop down NEVER has to the United States as an option, or the State, that I live in the United States.

  I tried to restart my computer, delete the folder of installation of AppData\Local\Microsoft and retried the upgrade program, and yes the URL I have download the file contains en-US.
  What's wrong?

  Hello

  If I understand the question, you aren't able to find the State that you live in the options while improving to Windows 8.

  From which site you download Windows 8 Upgrade Assistant?

  You can try to download and execute Windows 8 Upgrade Assistant using the link below.

  http://Windows.Microsoft.com/en-in/Windows-8/upgrade-to-Windows-8

  You can contact Microsoft Store / Customer Support for assistance:
  
  Sales and support
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Site_Contact

  Hope this information helps you. If you need help or information, please reply to this message. I'll be happy to help you.

• 4430 s ProBook: probook 4430 s Bay undetected on the bios upgrade

  Hi all

  I have a problem about 4430 s probook boot configuration. I just bought an ssd drive and I want to make a double system with two disk by adding the ssd via a caddy on the portable player. The problem is that I don't see the "notebook" option upgrade Bay on the startup command option. I already activate the laptop upgrade Bay hard drive as suggested on the next page, but I still don't see the Bay of laptop computer upgrade when I Press f9 and f10 at startup. Any suggestion or information how to fix this?
  Thanks in advance for your help.

  http://Forum.NotebookReview.com/HP-business-class-notebooks/586353-HP-EliteBook-2560p-owners-lounge-...

  ERICO, exchanging, I'll be able to boot from my SSD, but I don't always get to choose which drive I want to start, right?  That's right

  If you install Linux on the disk hard inheritance after Windows 7 has already been installed on the SSD drive and use the GRUB boot loader, it should be doable.