HP Envy 17 t-j100 Notebook PC - HP BIOS upgrade Assistant. PC will not boot to the top.

Similar Questions

• 15-ab271sa Pavilion: Pavilion Notebook 15-ab271sa occasionally won't boot to the top

  Hello

  I recently bought this new laptop and have problems with it sometimes does not start windows.

  I see on the HP website there is an update of the BIOS for this machine which apparently addresses the problem that I am experiencing, but I'm confused because my current BIOS Version is not displayed in the list of previous versions of the software in the BIOS and when I run the softtware Assistant support installed on the machine there is no mention of an update of the BIOS.

  Either way, I did all the recommended software updates by using the help Wizard, but when I look at available updates on the Web Site for my machine there are numerous others proposed.  In addition, some updates are repeated as Rev A and Rev B, and I don't know what that means.  In addition, because there are updates for the other elements of software for different brands of hardware, I expected only these updates appear in the Support Assistant that relate to my particular machine.

  I would like any advice or comments on this situation before proceeding further.

  MB

  Hello @Mo42,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post on the matter with Notepad starts and tried to help you!

  There seems to be a problem with the update of the BIOS by the HP Support Assistant.  For now, you can download the BIOS directly from the HP site.  You can find the drivers for your product here: HP Pavilion Notebook - 15-ab271sa (ENERGY STAR)

  Once you update the BIOS and reboot the laptop, let me know if the problem is resolved.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Pavilion g7-1167dx Notebook PC will not boot

  I have a HP Pavilion g7-1167dx Notebook PC running Windows 7 Home Premium.  When I turn it on, the LED only lights are LEDs of power (on the power switch and side) and the network LED on the F12 key.  I am not able to enter the diagnostics of material via the F2 key.  The fan is operating normally. It had been produced intermittently before (during the last two weeks), but I wanted to just wait awhile and it would eventually start again.  When he finally is never returned, I disassembled carefully, according to the maintenance and care, guide (on an ESD protection adequate workstation) and gave it a good cleaning.  It was very dusty inside.  Unfortunately when I reassembled it, it still does not work.  The computer is a little more than two years.  -In addition, there was never any display error or other indications of problems. Product number: LW414UA #ABA

  I sent the motherboard to repair parts of computer out of Miami, Florida and they fixed it and returned.  I was told it was the video chip.  They charged $70.00.  With each shipment way I got it fixed for $90.00.   Hallelujah!  With their setting of the original motherboard, I didn't have to worry about problems of CMOS and "tattoeing" a new motherboard, which would have cost a lot more.

• HP Envy 4500 will not scan to the MacBook Air Yosemite 10.10.3

  My printer connects wirelessly with my MacBook to print. It seems perfectly fine copy.

  However, the scan will be get no MacBook computer a friend and scan to it and refuses to scan at mine. I tried printing via system preferences > printer and scanner, tried to remove my printer and add it again to the impression that tried to download drivers for Yosemite to find that the error in the application downloaded impression told me that airprint was not working and the scan could not be completed. On my printer, my computer was never seen on screen as one scan to. How to solve this problem?

  Hi @LSarah,

  Welcome to the HP Forums!

  I noticed that you cannot scan with your printer HP Envy 4500 on Mac OS X 10.10 Yosemite. I'm happy to discuss this issue scan for you!

  Please, try the procedure described in this guide, connection error shows then scanand let me know what happens!

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP ENVY M6-1105dx - won't boot to the top

  I had a HP ENVY M6 - A10 (1105dx) a year ago. The Laptopn worked well... I did not use for about a month I was away and when I put on there no start but a CAPS light kept flashing twice.so I did a recovery of BIOS by pressing Windows key + B and pressing the power button...

  A week after the same problem... but this time when I go to the BIOS recovery... the machine does not start, but the CAPS LED begins to blikn once...

  I'm a little helpless as to what to do with this...

  Appreciate the Heads up on the people of this problem... !

  Thanks in advance!

  Hello Vish_hp,

  Welcome to the HP Forums!

  I see that you are unable to boot up your laptop.

  Bad news, if the Caps Lock flashes once, it is a failure of the CPU. Two flashes is a failure of the corruption of the BIOS, so you that dealt appropriately with the BIOS recovery. I see a previous post that you made on a fan failure which is very probably the catalyst to the problem.

  Take a look at this document for more information on startup with flashing lights problems: computer does not start and the lights blink or computer beeps.

  Sorry for the bad news.

• HP Pavilion Notebook 15-p020ca: HP Pavilion p020ca 15, will not capture 5.0 GHz signals

  So my laptop to get signal from my d-link router which was 5.0 GHz, but now it doesn't. It has only been a few days he did this, and I've updated all the drivers. Again is not to choose this signal, what do I do? I really need to use 5.0 GHz as there is a LOT of interference in the dorms here when using 2.4 GHz.

  Hello:

  The specifications of product for your laptop below indicates that it only comes with a wireless card single band (2.4 GHz).

  http://support.HP.com/us-en/product/HP-Pavilion-15-notebook-PC-series/6936226/model/7174276/document/c04337031/

  At any time you see a classified N b/g/n wireless network card, i.e. it can only send and receive on the 2.4 GHz band.

  http://PartSurfer.HP.com/search.aspx?SearchText=G6R22UA

  The list of parts for your laptop that confirms that it comes with a

  Realtek RT8723BE 802.11bgn 1 x 1 adapter for combination of Wi - Fi and Bluetooth 4.0

  This card cannot operate on the 5.0 GHz band.

  A dual band Wireless N card has a suffix ending with a/b/g/n or a/g/n.

• ENVY 4520: printer will not connect to the wireless network

  with wireless on Printer Setup Wizard, printer detects the network but when I enter the key to encryption (correctly), he comes back with a message "Unable to connect to the network".  The printed report suggests the address filtering MAC can be activated.  But I checked and it is specifically DISABLED.    The printed report indicates a FAILURE on "no filtering."

  Please notify.

  After struggling with this for two days and after the announcement of this question and all by downloading the HP doctor, I noticed that the printer had suddenly cured himself. I'm not sure what I should credit this miraculous healing. Thank you I guess?

• Pavilion 17-e003eb P:-laptop HP Pavilion 17-e003eb Notebook PC model #: E5U95EA will not be updated the BIOS level

  HP Support Assistant said I'm new updated including the BIOS, but updates blocked at the final stage, also happens to cyberlink photodirector, what to do? PS: anyone can give me the sp76846.exe so I can update manually?

  Nope. I opened it myself in the temp folder after the closing of the Task Manager.

• HP250 G3 Notebook: network will not work after the upgrade to Windows 10

  Hello

  Someone was able to get their network works after upgrade to Windows 10 for their portable HP250 G3?

  I think I have a driver problem. The message I get is along the lines of "impossible to link to network protocols. There is also an "unknown" device in Device Manager. Comparison with Windows 7 Device Manager, I can't understand what it could be.

  Of all drivers not not to work, the network is one of the most important that you can not use the Internet to debug the problem. I have uninstall Windows 10 and Windows 7 troubleshooting. (such a pain)

  So far, I tried to download all the drivers of network you're interested in that I can find on the web, as well as the Bluetooth drivers. I reload once 10 Windows installed and hope for the best. They got the right driver for the wireless network (which works only default with Windows 10 I might add) work, but I think it might be a controller driver that is still missing.

  I found a few sites that have suggested to the registry of hacking. I tried that too, but without success.

  If someone hacked into the problem, I would be happy to help.

  Hello

  Thanks for posting your concern, and I would like to try the drivers from the following link---

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=6732463&swLangOid=8&swEnvOid=4192

  It didn't help not then write us back with the network card, you can get to the screen of the Device Manager under network adapters, as if from here so we can try searching the drivers from the manufacturer of netwrok card.

  Although I work for HP, but I am personally.

  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution. Click on the 'Bravo Thumbs Up' on the left to say 'Thank you' for helping!

  Concerning

  Aks3621

• HP TouchSmart Ultrabook 4 ENVY: fried, drive will NOT boot from usb

  Hard drive clicking on, definitely fried. Replaced by the new hard drive. No matter what I do, it will not start from the

  bootable USB key with windows 8 install on it.  Stick to boots on other computers.

  I press ESC to the maximum power that I can get the boot menu, F1 works great, F2 works very well.  If I select F9 for boot options, for bios F10 or F11 to restore it goes back to the found boot device, hard drive (3F0) asks me to press F2 for the diagnosis of sys, the screen flashes. will not change.  No matter what I try, I'm stuck in this endless loop.

  How can I put an operating system on this device?

  Model # c2k82ua #abl

  Nothing I've tried has worked. However, I have finally managed to make it work has that.  I disconnected the battery for the bios for a bit. After that, I could get in the bios setup. Still would not start from a good bootable USB then I activated the Legacy and set the boot order to boot from an external USB Cdrom. Reinstalled windows 8 and all is good now thanks for all the comments!

  Dave

• Want to dv6 Notebook PC 7226nr: scan fingerprint hp simplepass does not work after the upgrade to windows 10

  My HP SimplePass fingerprint reader does not work after the upgrade to Windows 10.  Is there a fix for this yet?

  I thought about it.  The upgrade to Windows apparently damaged 10 HP SimplePass software.  Once I uninstalled and reloaded the program, everything started working.

• HP ENVY 17-j020us Quad Edition: installed SSD and Windows 7, now the laptop will not boot

  I replaced my hard drive Windows 8.1 with a PNY 240 GB SSD and Windows 7 64-bit.  Everything worked very well! Installed all the drivers, everything has worked very well!  Restarted several times, everything worked fine!  Portable stop for the night, the next morning I turn on the laptop and get this error message:

  "not found boot device, please, install an operating system on your hard disk, hard disk 3F0".

  I've traveled different repair procedures using the ERD Windows 7 without change.  I have reinstalled Windows 7 with SSD formatted as GPT drive, received the same error message:

  "not found boot device, please, install an operating system on your hard disk, hard disk 3F0".

  I have reinstalled Windows 7 SSD formatted as MBR disk withs, received the same error message:

  "not found boot device, please, install an operating system on your hard disk, hard disk 3F0".

  I removed the SSD to the laptop and placed in a desktop pc, pc works fine, no problem with the SSD.  SSD in laptop, got the same error message: "boot device not found, please install an operating system on your hard disk, hard disk 3F0".   I don't know where to go from here.

  Help please...

  Okay, I'm running.  In the System Configuration UEFI clicked 'Load HP Factory Default keys', this restored "Secure Boot" who has restored the laptop as long as you work!  Thanks for the help.

• Compaq Presario V6310US Notebook PC does not start at the top.

  This laptop was bought new on 11 May 2007.  This problem started about a month ago.  The monitor would be just off then go back to normal, until one day it just wouldn't start.  Lights along the top of the computer will be light, stay on for a while and then turns off and the monitor remains blank.  This happens again and again until I just turn it off.  My husband took the computer to a repairman who said it is a hardware problem, but he had no idea what.

  I don't know if I have included all relevant information, and if not, I'll be happy to add anything that might be useful.

  Thelma

  Thank you very much for your help. My cell phone is listed and I will contact HP tomorrow to grab their free repair. I do not think that this solves my problem but I don't know how to mark resolved. Maybe I can find how do. This is my first time on this forum but I don't know that it will not be my last.

• HP ENVY 15 t-j100 Quad Edition: drivers and software for simplepass with finger print reader.

  I have a HP ENVY 15 t-j100 Quad Edition laptop and I need simplepass software and drivers for the fingerprint reader.  I win 10 and simpelpass software has been deleted by mistake.  I can't find where and how download from the hp web site.

  @shadow_42

  Welcome to the Community Forum of HP.

  There are a small number of Windows 10 HP drivers:

  HP ENVY TouchSmart 15 t-j100 Quad Edition CTO Notebook PC

  Please check - in particular, you may want to ensure that you have installed the Chipset driver.

  ===================================================================

  Windows 8.1 driver revealed this Eagle Driver validity for your fingerprinting device:

  sp63418.exe

  Series 8 HP SimplePass program has just been updated for Windows 10:

  sp71729 HP SimplePass V8.01.46has 32/64 bit W7 - W10

  • Install the driver first, restart the computer and log in
  • Install the program HP SimplePass second, restart the calculation and sign

  Help, Information and general advice:

  HP SimplePass upgrade instructions

  Read the first page: Dragon Document guidelines

  Section:

  Procedure - updated / (install HP SimplePass Re)

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Quad Edition CTO Notebook HP ENVY 15 t-j100 fan noise

  I recently bought a HP ENVY 15 t-j100 Quad CTO Notebook Windows 7 Professional Edition (PC product #: E1P05AV) and I noticed that when the laptop is under any kind of load, the fan can be incredibly strong. There is no abnormal noise, but the volume itself can be irritating. Basically, it looks like a dryer located on the top. I was wondering if it was just a normal phenomenon or if there was something more to him. I have the latest version of the downloaded bios, and there should not be any dust or dirt in the book since I just got. If someone could shed some light on this, I would gratefully.

  Hello
  
  Thank you for visiting the forum!
  
  I understand that whenever there is any kind of load your system fan noise, it's usually an overheating problem that I suspect.
  I really recommend that you quickly go through the following documents & try to do at home and hopefully solve the problem.
  
  http://support.HP.com/us-en/document/c01007591
  
  http://support.HP.com/us-en/document/c01657439
  
  Hope this helps you,
  
  Thank you