The network is disconnected (and display problems too)

Similar Questions

• I have a problem in my iPhone 5 s while I call someone when on-call time at 1 hour of the call is disconnected and say call failed can help you me in this problem.

  I have a problem in my iPhone 5 s while I call someone when on-call time at 1 hour of the call is disconnected and say call failed can help you me in this problem.

  What iOS version you are running. I've heard of it, but I heard no talk for a long time... You can update to iOS.

• Why the connection to a local database becomes lost when the network is disconnected?

  I use TestStand 3.1. I have a configuration database on the local drive and I use the option "Log on the Fly.

  The test takes 48 hours and I want to assure you that it will not stop if the network connection is lost.

  If I unplug the network before starting the test, fine. I can plug the network again while the test runs without problem.

  But if the network is connected and I start the test and then disconnect the network of recording on the fly will give an error.

  I narrowed down it to "New USE for database Logging" step in the SequentialModel.seq (process model). If this step is performed with the network connection then the rest of the test needs a network connection.

  Is it possible to avoid this error?  The point of all the local database was to avoid network problems.

  Thank you for your help.

  TDOT-

  I connect you always locally, please try to change it to "localhost\SQLEXPRESS" to see if you can log in and then see if the same problem as you disconnect the LAN causes previous saw.

• After installing the adapter Netgear wireless, I get an error stating that "the network is disconnected.

  original title: network problems

  I recently installed the Netgear Wg111v2 wireless adapter and a router netgear WPN824v3 wireless... All Indications, that it should work... Instead, I get a message... «the network is disconnected...» "I checked all the connections m... Nothing seems to work... What I am doing wrong?

  Hello

  Did you try to scan for networks.

  If so your router/network name

  If you see it please select and connect, if have set up a secure connection, you must ensure that you put in the password / key.

  And you should be able to connect to the network without any problems.

  If the problem persists, please respond back with

  What happens when you search for the network

  What happened when you click on to connect.

  And what happens if you try the same steps after the reboot of the router and your computer.

  Thanks for your time,

• Received a warning to unidentified on the network computer. Under the status of the network looked up and saw a computer I don't know anything. What is - this and how?

  Original title: computer not identified on the network

  Received a warning to unidentified on the network computer. Under the status of the network looked up and saw a computer I know nothing on my network. What is - this and what that can do. ?

  Implement the security of your network... How to do depends on details. If your network is at home on a wifi router, and then implement WPA2, which will prevent unauthorized as well as encryption of your data access.  Follow these steps on the router itself (once again the details depend on your situation.)

  While I'd love to implement WPA2, WPA2 will not accept my network and I am limited to WPA.  My point is that if it is a wireless intrusion (we don't even know if it's wireless at this point), then the security settings on the router must first be discussed with the manufacturer ISP or router so that they are appropriate for devices and services and programs.

  It could also be a USB transmitter attached to the computer.  It might be the malicious program or a problem with the firewall or a real hack of the computer through the firewall or caused by malicious software (even if you use cables or wireless).  It could be the entire network (but the number of computers which implies) or only this one computer.  It could also be a system service using the network and not really another computer in itself (in office what he says and where - some may be difficult to recognize and interpreted as another computer).  There are many possibilities.  We do not know what the warning generation program or what he says.  More information is needed.  I would also like to work on it - and it can follow to her new home.

• Error when opening file reader pen "the driver or network connection that the shortcut 'Target.lnk' refers to is unavailable. Make sure the disk is properly inserted or the network is available, and then try again. »

  Original title: during opening of pen drive file to msg "the drive or network that all connection 'refers to mpr shortcut' folders.lnk all in unavailable.make that the disk is properly inserted or the network is available and then try again."

  OS:-xp sp2

  pen drive :-transcend

  earlier, my USB had worms, bt Finally I took it off my ESET internet security (fully updated).

  BT still records are transformed into shortcut of 1 kb. and makes me worried coz I m nt able to open these files... Please help me out of this problem... I need my data, its urgent.help me as soon as possible to change these documents in their original format.

  my folders have files .doc, some do' report.unfortunately not have a backup of these files.

  target location: Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN

  In the location target properties are even 4 all records

  Clinical target:-H:\Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN\73mrVQz9rDByh9hfKJ9v0lt5z3m0s5hP0l.exe real sheet.xls

  What exactly is...

  I ve deleted the worms... checked by ESET, CLAMWIN PORTABLE, lapi ny window 7 WINDOW DEFENDER friend.

  ESET that worms have been Win32/AutoRun.VB.UG.Worm.

  now, I ve you gave details d, should know the problem I ve.i believe.help me

  Thank you for your time, but I did nt get the solution everywhere so formatted, it

• Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

  Hello

  I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  For reference:

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Note: The notes section through the link above.

• the host is disconnected and require restart to vcenter

  Get a problem for the host is disconnected and only a reboot of the host gets their return to vcenter.

  Is there an upgrade performed recently at 5.5.

  See you soon

  Petter

  Something goggle and beneath the article, suggest you give a try to this...

  VMware KB: Activation or deactivation of VAAI ATS heart rate

  Concerning

  Rahul

• In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  Details please

  What version of Aperture? Is OS X 10.7.5 as you say correct for your OS? You shoot JPEG or RAW? If RAW device? Wharton has changed since this worked?

  LN

• To send messages through the network (LAN, netsend and msg.exe) does not win 7... can u tell me the cmd

  To send messages through the network (LAN, netsend and msg.exe) does not win 7... can u tell me the cmd

  If any document available please send my email id

  Thank you & best regards

  Martine

  Hello

  Thanks for posting your query to the Microsoft forum.

  Please see the suggestions in the following threads:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/msgexe-netsend-anything-availible-on-Windows-7/e9743edc-AFA9-4942-b1c7-66baf443067b

  https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/net-send-in-command-prompt-does-not-work/00ce5137-dff7-49e5-8511-943e55b83bd7

  Let us know if you need more assistance. We will be happy to help you.

  ___________________

  Thank you best regards &,.

  Isha Soni

• How to intercept the sockettimeout exception message and display in the user interface of the view?

  Hi my jdev - 11.1.1.7 version

  I ask a socket connection in my AM and I want to catch the exception of the sockettimeout of t and display the error message in the user interface of the view layer.

  I use customException class that extends DCErrorHandlerImpl, but if we use try catch, then exceptions doesnot reach customclass.

  How to catch exceptions and return to view the layer if we use the operation binding. ?

  Because you call the operation via the link layer, which is perfectly fine, you do not get an exception at all. Exceptions thrown in methods called via the link layer are captured by the framework and transferred to the appellant in the operation binding.

  For that, you get the list of errors after the call returns and add them as messages of faces

  execute the method

  Method.Execute ();

  List errors = method.getErrors ();

  If (! errors.isEmpty ()) {}

  handle errors errors here is a list of exceptions!

  We only get the first

  E receive = errors.get (0);

  FacesMessage msg = new FacesMessage (FacesMessage.SEVERITY_ERROR, e.getMessage (), "");

  FacesContext.getCurrentInstance () .addMessage (null, msg);

  }

  no error return to normal work

  Timo

• I created form in adobe acrobat X 1 Professional. Now, I want to put logic on a field. I want that the document will be closed if someone between age under the age of 18. and display a message for minors?

  I created form in adobe acrobat X 1 Professional.

  Now, I want to put logic on a field.

  I want that the document will be closed if someone between age under the age of 18. and display a message for minors?

  The final document is a little drastic... Perhaps simply display an error message? In any case, you can do it like this, as a custom field validation script:

  if (event.value && Number(event.value)<18) {
      app.alert("You must be an adult to fill in this form!");
      this.closeDoc(true);
  }
  

  Be aware that using this code will close the file without saving it, and the user will lose all unsaved data that they have entered.

• Why 12 items to hang as soon as I open the text tool?  Get the message "an unexpected and unrecoverable problem has occurred.  Photoshop Elements will now stop.  With the help of Mac

  Why 12 items to hang as soon as I open the text tool?  Get the message "an unexpected and unrecoverable problem has occurred.  Photoshop Elements will now stop. "In Mac Help.  No imported fonts

  First check your fonts folders and make sure none of them are empty. Then get out the font book (applications > utilities) and check all your fonts, with which and resolve duplicates and fix any problems.

• Satellite A500: problem with the driver of sound and display after update!

  A500 Windows 7-64 bit

  I download the latest driver (6.0.1.6048) sound and display driver (8.16.11.8973) and I have a few problems.
  The colors are too bright and the sound is too deep (as the middle are too low).

  Hello

  Then why you n t go back to earlier versions of the driver?
  In your case, I would recommend setting the operating system at the point of time at first, until you have updated the drivers.
  Usually, this should help to recover the old drivers again.

  Welcome them

• The my wireless is not functional (HP slimline win xp media). The sign (!) is next to the network controller icons and the Realtek drivers. Please advise me steps to solve these problems.

  In the Device Manager settings, how to fix the sign (!) beside the network controller and the Realtek drivers for the card to operate wireless? in win xp for HP slimline free?

  Please indicate where to get a free package of download and installation, if necessary, with the right drivers and you please see a "how to install" because I can't possibly struggle with this more.  NO COMPUTER = GRUMPY ME.

  Thank you kindly,

  Amber

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/