The network speed of the iSCSI to the SPs software

Similar Questions

• Reference Dell MD3200i correct editing with IP system and the NIC for faster network speeds

  Hi all

  I worked on this project for a while now. I did a lot of research and have contacted Dell several times. I need help.

  I have 2 sets of identical to use for Hyper-V clusters servers. We bought a Dell MD3200i in November, we also bought a Dell 5424 switch and a Cisco SLM2048 switch. These servers have Real Tek 2 network cards for iSCSI Jumbo frames is 9 k

  The Dell MD3200i is two SAN controllers. Dell 5424 is the iSCSI optimized switch and Cisco is a 48 switch ports. iSCSI is on its own network that nothing else is connected to it. (There is an Iomega NAS and a promise Vtrak SAN Tech with all current domain of execution with iSCSI controller)

  Reference Dell MD3200i controller 0 Port 0 192.168.130.101 controller 1 Port 0 192.168.131.101

  Controller controller Port 1 0 192.168.130.102 1 1 192.168.131.102

  Controller controller Port 2 0 192.168.130.103 1 2 192.168.131.103

  Controller controller Port 3 0 192.168.130.103 1-3 192.168.131.104

  Cisco switch has 1 VLAN n ° 1 on it and the 130 subnet inside elements. There are 8 connections to the switch. 4 controller 0 and 1 of each of the servers. It has an IP of 192.168.132.4, but that switch IP does not make difference. Lighted Jumbo frames

  Dell switch has 2 of #1 for various things such as the domain controller, Vtrack, and SIN. Subnet 2 is 131 and has a total of 8 connectors inside. 4 in 1 controller and 1 from each of the servers. Lighted Jumbo frames. The switch IP address is 192.168.132.2

  Groups of servers. Each server node running Windows 2008 R2 SP1 and running hyper-v with virtual server clusters / storage folder on them. 2 Realtek NIC with Jumbo frames made 9 k ProdNode1 and ProdNode2 have 12 Core i7 CPU with 12 GB memory, EXNode1 and ExNode2 have 12 Core i7 CPU with 24 GB of memory.

  ProdNode1 iSCSI-1 192.168.130.110 ProdNode1 iSCSI-2 192.168.131.110

  ProdNode2 iSCSI-1 192.168.130.120 ProdNode2 iSCSI-2 192.168.131.120

  ExNode1 iSCSI-1 192.168.130.130 ExNode1 iSCSI-2 192.168.131.130

  ExNode2 iSCSI-1 192.168.130.140 ExNode2 iSCSI-2 192.168.131.140

  Portal discovery iSCSI on ProdNode1 went to 192.168.130.110 192.168.130.101 and 192.168.131.110 192.168.131.101 each of the other servers Discovery Portal have been pairs like this.

  iSCSI tab click on add 8 MPIO sessions at each of the ports on the MD3200i from Dell, target. For example, I added 1 session of 192.168.130.101 using it. Add Session,--> activate--> Advanced Mutlipath--> Local--> IP 192.168.130.110 initiator and target 192.168.131.101 iSCSI adapter. This is repeated on all servers. 4 connections for each NIC.

  The network is very slow. It revolved around 2 to 4 MB/MIN and it should be much faster. Initially, we had only the Cisco switch with only 1 VLAN and everything connected directly to it. I read somewhere that MPIO has been the problem, so I went through the same configuration but does not verify the MPIO checkbox above. Once this has been done, the network speed went up to 1.5 GB/Min but modular storage Dell was not happy, and virtual servers would fail and the connection is not very stable.

  What wrong with my setup? Can I directly home and fix the servers directly to the PowerVault and will make stable and allow for failover and redundancy NIC? I need to get this stable so I can move with something else.

  Thank you Ron

  You will need to change your system of intellectual property on this:

  rbramble

  EX-Node1 iSCSI-1 192.168.130.130

  EX-Node1 iSCSI-2 192.168.131.130

  EX-Node2 iSCSI-1 192.168.132.140

  EX-Node2 iSCSI-2 192.168.133.140

  Prod-Node1 iSCSI-1 192.168.130.10

  Prod-Node1 iSCSI-2 192.168.131.10

  Prod-Node2 iSCSI-1 192.168.132.20

  Prod-Node2 iSCSI-2 192.168.133.20

  Reference Dell MD3200i

  Controller 0 Port 0 - 192.168.130.101 Jumbo Frames 9K

  Controller 0 Port 1 - 192.168.131.101 Jumbo Frames 9K

  Controller 0 Port 2 - 192.168.132.101 Jumbo Frames 9K

  Controller 0 Port 3 - 192.168.133.101 Jumbo Frames 9K

  Controller 1 Port 0 - 192.168.130.102 Jumbo Frames 9K

  Controller Port 1 1 - 192.168.131.102 Jumbo Frames 9K

  Controller 1 Port 2 - 192.168.132.102 Jumbo Frames 9K

  Controller 1 Port 3 - 192.168.133.102 Jumbo Frames 9K

  Your iSCSI sessions will be:

  For EX-Node1:

  -192.168.130.130 to 192.168.130.101

  -192.168.130.130 to 192.168.130.102

  -192.168.131.130 to 192.168.131.101

  -192.168.131.130 to 192.168.131.102

  For EX-Node2:

  -192.168.132.140 to 192.168.132.101

  -192.168.132.140 to 192.168.132.102

  -192.168.133.140 to 192.168.133.101

  -192.168.133.140 to 192.168.133.102

  For Prod-Node1:

  -192.168.130.10 to 192.168.130.101

  -192.168.130.10 to 192.168.130.102

  -192.168.131.10 to 192.168.131.101

  -192.168.131.10 to 192.168.131.102

  For Prod-Node2:

  -192.168.132.20 to 192.168.132.101

  -192.168.132.20 to 192.168.132.102

  -192.168.133.20 to 192.168.133.101

  -192.168.133.20 to 192.168.133.102

• Speed/performance of my mac mini (mid-2010) is very slow. Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.

  My mac mini (mid-2010) speed/performance is very slow - think of it as a result of letting my kids do "whatever" about it in recent years.  Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.  You will also need to get data out of old PowerBook G4.

  < object edited by host >

  We are users like you.  Search locally by using something like Yelp or similar

  http://www.Yelp.com/search?find_desc=Apple+repair & find_loc = Chicago, + IT & start = 0 & ortby = rating s

  or read a few links which may be relevant on this forum about the slow mac mini

  http://BFY.tw/5C63

• computer starts but nothing works. OneCare has been stopped, restart, no network connection found, office does not work. Analysis now with the malicious software removal tool, but nothing happens.

  OneCare was 'arrested' will not restart
  Wireless networks - does not and cannot correct
  No program will run if I'm in safe mode
  I did a virus scan with the malicious software removal tool, nothing was found.
  I write this on my netbook - I can't have my laptop online.
  I have no idea what to try next.  I need my laptop!  Help, please

  Hello laughingpaws,

  To help resolve this issue, use the System File Checker (SFC.exe) tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER: sfc/scannow sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Whenever I try to download I get this error message "a socket operation was attempted to an unreachable network. "This means that the local software knows no route to reach the remote host.

  Hi all

  I use windows 7. whenever I try to download I get this error message "a socket operation was attempted to an unreachable network. "This means generally that the local software knows no route to reach the remote host" what does that mean?  help solve this problem. Thank you '.
   
  Original title: proxy error

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/categories

  Hope this information is useful.

• I have to install the printer software complete on all 3 computers on my wireless network

  Range of printers all-in-one color Laser HP CM1312 (USB connected to the Dell desktop computer) Windows XP - 32 bit

  HP Deskjet F4280 all-in in color printer (USB connection for HP Desktop) Vista

  Dell Windows XP 32-bit laptop

  all computers connected wireless to my network

  printers appear on all three computers, but will not print documents on the Deskjet F4280 printer?  Even the office connected directly to the F4280!

  Do I need to install the complete set of the software of the printer to the printer on EACH computer, or the device software to connect to each workstation?

  Hello

  To get all the features of each printer, you must install drivers and applications of EACH printer on EACH machine except when configuration allow pinters to join the wireless network

  Kind regards.

• When I try to run the Netgear software for use with my new router, I get a pop up window that says only: "service failure".

  original title: WIFI ADAPTER 'SERVICE has FAILED.

  Although my new Netgear dual-band "N" WIFI ADAPTER works optimally and, out of curiosity, I have re-installed several times using the accompaniment CD... there is a small problem I want to solve: when I click on the WIFI adapter desktop ICON, I get a window of PSI with the message "FAILURE of SERVICE.  Yet once, WIFI actually moved and is also indicated under the programs/features and works perfectly well.  When I bring up the icon under all PROGRAMS, the same result occurs: the same message reappears: "FAILURE of SERVICE.  When I called Netgear to the Philippines call center, support staff of so-called tech advised me to ignore the message and that I was the first caller on this issue, "as long as the WIFI adapter gives you the desired signal quality and speed, just ignore... "When I pressed on others, a supervisor at the call center told me that she would pass on the information that I provided to their engineers to study the problem.  In addition, the supervisor told me that no one had contacted the Center to call on this particular issue.  Yes, I even disabled the built-in WIFI adapters (Atheros), but the 'problem' in question still exists.  Please note that it is a phenomenon of long months and that in the past whenever I clicked on the ICON, the regular Netgear Windows would come upward, including the various hot spots in option, etc. I even updated the software successfully and rebooted the laptop, according to Microsoft's Windows Update instructions.  Please let me know what is happening and how I could fix this ' cosmetic ', if that's what it is, according to Netgear support.

  Thank you very much.
  Joe

  Hello

  You can read this article and check if it helps:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For the first try to not use the utility of Netgear wireless. Often in Windows 7 Wireless works perfectly without special use of the adapter. If this map needs of the Netgear utility, in case something went wrong during installation I suggest you uninstall it and then reinstall. Also allows to download the fresh software for the Netgear adapter...

  Click on the link below
  http://KB.NETGEAR.com/app/answers/detail/A_ID/12998

  register with Netgear, and then download the software.

• having the iPad several years; I forgot the password. Tried to restore; Unable to get the new software on my Macbook to charge; always disabled iPad

  have older Ipads; I forgot the password; now disabled. Tried restore several times. My Macbook won't download new software. Several error messages.  iPad now could not be restored and open

  Hey domerdrnd74,

  Is not not be able to access you iPad because it is disabled does not for a good hour.

  If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled through the steps you need to do to get the iPad upward and running. I did these steps a few times before and they work every time. You may need to put your device in recovery mode, more than once if your internet speed is slower by downloading the restore software.

  See you soon

• Printer wireless HP Envy 4520: can't see the instructions on the screen after downloading the required software

  I have an HP AMD A6-Series computer laptop with McCafee LiveSafe installed.  I am able to download and 'Run' the printer wireless driver software, but the instructions on the screen that are supposed to appear subsequently do not appear.

  I tried to disable the Virus protection part and the McCafee software software (thinking it can work as a pop up blocker), but to no avail... Please help!

  Hi @scgoldman2003,

  If the printer is already on the wireless network to which the computer is turned on, the computer must be able to see the printer wireless.

  Here is a support document which can help to ensure that the printer is ready for installation wireless - wireless printer Installation.

  If the wireless printer is not considered during installation this document can help - printer not found during Network Driver Setup (Windows).

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• After 2.2 update, error: "the Apple software update server is not found."

  Apple Software Update just updated itself to the version 2.2.  After letting the Apple Software Update 2.2 finish, I receive the error: "the Apple software update server is not found.  Check your Internet settings and try again. "The tool also pointed out"the new software is available from Apple.  I run in a typical home environment to network with a router on FIOS on Windows 10.  A virus scan was clean.

  I just uninstalled iTunes and apps and fact a relocation fee.  Once again the proposed Apple Software Update app updated to version 2.2.  After the update successfully, the error appears again: 'the Apple software update server is not found.  Check your Internet settings and try again. »

• Satellite P500 - 01 G-install the Toshiba software after clean install

  Hi all

  I have a Toshiba P500 - 01 G (http://www.mytoshiba.com.au/products/computers/satellite/p500/pspgsa-01g003/overview) running the grouped Windows 7 Home Premium 64-bit. I bought an upgrade to Windows 7 Ultimate, but can not use it, he just tells me to use Windows Anytime Upgrade.

  However, I can use it for a clean install and I intend, but I don't know what to do on the Toshiba Software (http://www.mytoshiba.com.au/support/computers/satellite/p500/pspgsa-01g003/download?os=25).
  I read on another thread that the software must be installed in a certain order and frankly I have no idea! I don't want to break something! I'm not to ask for the list accurate for each of them (except if you have time) but just a general guide as to what I should install in the order.

  Also, I guess that my recovery partition is erased in the process and I can't get it back. Is this true?

  Thank you very much. I really appreciate it,
  Abraham.

  Hello, Abraham

  I m the Satellite P500 owner too and it's really great machine, isn t it? I like it. My Toshiba best ever.
  My machine is preinstalled original Toshiba recovery image and it works without any problems so I put t want to change anything.

  Back to your question. I assume that you have a few reasons why you want to use the Ultimate version then you should try to clean OS install. Before you anything create recovery DVDs. Make two copies.
  After that make what you can do with your laptop all you used to because if you want to have the factory settings, again you can use created the recovery disc and install original recovery image.
  After recovery of registered OS image will help and you will not be able to start the installation of HARD drive recovery then please create restore DVD.

  Installing Win7? I have the European model, and I will send exact installation order list. There may be small differences compared to the model of the AU, but the principle remains the same.
  Here we go:
  Windows 7
  Chipset SW installation utility
  Intel Management Engine Interface
  Display driver
  Intel Turbo Boost Technology driver
  Intel Rapid Storage Technology driver
  TOSHIBA supervisor password utility
  TOSHIBA HW utility
  TOSHIBA Value Added Package
  O2 card reader controller
  NVIDIA driver HD Audio
  Conexant Audio driver
  Wireless LAN driver
  Synaptics Touch Pad Driver
  TOSHIBA HDD Protection
  Bluetooth Stack for Windows by Toshiba
  LAN driver
  Winbond CIR driver
  YUAN pilot DVB-T/ATSC Tuner
  Sleep USB TOSHIBA and service charges
  TOSHIBA face recognition
  TOSHIBA eco Utility
  TOSHIBA HDD/SSD Alert
  TOSHIBA Service Station
  HDMI Control Manager
  TOSHIBA Remote Control Manager
  TOSHIBA fingerprint utility
  PatchFiles FixFPService_REG_1.0
  ConfigFree
  TOSHIBA Assist
  TOSHIBA Web Camera Application
  TOSHIBA Extended Tiles for Windows Mobility Center
  TOSHIBA Network Device ID registry tool
  PatchFiles PCIIDEREG - 1.1

  I hope this will help you.

  Good luck and if you have any other questions please let us know.

• Could not load the Lego software using a student connection

  Hello all, I tried to get the Lego factory software shipped to work on our network (we are a school and use s RM CC3 network). I was able to get the package to work correctly for a user admin (full access to the local computer), but to us this software as a student, I get the following error. "Error loading ' fantom.dll initialization routine"A dynamic link library (DLL) has failed. " This error, as the software does, and then it breaks down before opening the main program. If someone could give me an idea what permission to give in the case or a solution on how to fix this? I have not downloaded the Toolkit or any additional software for the moment because if it is possible I prefer to get this work with the standard software.  Thank you very much in advanced, Richard

  Hello, we have solved the problem, we installed the software a differernt way and now, which seems to be working properly it could have been something wrong with the installation after all. It wasn't flaged, because it worked for an administrator.

  Cheers for your help tho.

  Soluition here: http://communities.rm.com/forums/posts.aspx?postID=45586&postRepeater1-p=2#58046 by Alex Hart

• System destroyed after you have installed the HP software

  Hello

  So, I bought a hp-notebook(HP Pavilion dv6-7082eg) yesterday and reinstalled Windows 7 Professional today. Then I installed the drivers and the HP software and everything is bugged... The Fingerprintscanner does not work, I can not start the Security Wizard, I can also not start HP SimplePass, but funny, is that I have even can not uninstall... Also some Windows updates always give an error. What the hell is wrong here? I have not install anything whatsoever except 5 HP-Applications but I've already seen 100 error messages.

  So before I reinstall Windows and screw again, I would know what is the best way and in order to get all this work.

  BTW: Why are there so many network drivers? I can't believe that I need 6 drivers WiFi from different vendors, especially when the WiFi works without having to install anything.

  Oh and there seems to be a dead pixel on the screen already. Good, bad software and faulty equipment...

  anyway thanks for any help.

  OK but how a "newbie" should know that we have?

  Yes of course. But if not this does not explain why I could not uninstall the Application.

  I think so.

  Now, I have reinstalled Windows, drivers, on-screen-Display and Power-Manager and took of AuthenTec TrueSuite and everything works without any problem... HP really must look for new programmers

• Can MS dealer licensed or registered to MS partners sell the MS software online?

  Buy software online

  I have a very small business - 1 person. Looking to buy MS products online at some sites established to help with costs.  Can MS dealer licensed or registered to MS partners sell the MS software online?  Downloads and full retail versions are available.  Is - is this legitimate?

  Hi, Nanisco,

  How to know if your software is authentic

  http://www.Microsoft.com/en-us/howtotell/default.aspx

  Microsoft Business Productivity Online Services partners

  http://www.Microsoft.com/online/partner.aspx

  Microsoft has a network of partners

  https://mspartner.Microsoft.com/en/us/pages/licensing/programs-products.aspx

  Academic resellers

  http://www.Microsoft.com/education/en-us/buy/licensing/pages/resellers.aspx

  Refurbursher program

  http://tinyurl.com/blbkkak

  Use this tool to locate a certified Microsoft partner

  http://support.Microsoft.com/GP/partner/en-GB

  http://www.Microsoft.com/en-Gulf/default.aspx

• Cannot remove/reinstall the iTunes software.

  When I try to remove, reinstall or update the iTunes software, I get a message: "the component you are trying to use is on a network that is not available.  Click OK to try again or find a different path to the folder containing the installation package 'iTunes.msi' in the box below. "The record I can find with this package is that given in the box.  When I click OK, I get another message: "the file ' C:\Documents and Settings\Application Data\Apple\Apple owner Update\ software" is not a valid package for the iTunes product.»  Try to find the installation package 'iTunes.msi' in a folder from which you can install iTunes. I was not able to do this successfully.

  Apple forums:
  https://discussions.Apple.com/index.jspa