The new version update problems

Similar Questions

• hp support assistant for the new version update is not installed

  HP Pavilion Slimline s5306ukP; Monitor LCD 20-inch HP 2010

  My problem is that I recently had a HP Support Assistant alert to download the new HP Support Assistant for the latest features.

  Well I tried to download the update, but it would not install? I'll go through the events on the screen and maybe you can inform me as to why this update for the new Assistant support will not correctly installed, thank you.  Everything goes up to 4. Then it will skip "Download updates" and go on 5 /, but nothing happens?

  Point adjustment 1/restore... pass; 2 disk space / audit... pass. 3 / connecting to HP services for new updates and alerts... pass. 4 / download updates... N/a; 5 / install/apply the selected items... no?

  Should I have to uninstall the version that I already have the update through and re - install a new Version, or you have any patch that can be applied to make this update installs successfully?

  I have Windows 7 Home premium 64-bit.

  Hi DP - K,.

  I tried again since my last email with the problem where I couldn't find the program once it is downloaded, and alongside the race/Save little was downloaded files. I clicked on it and watched the sp54931.ex download in a folder "view and track downloads. I then told run this and asked that my administrative password. I thought here goes while I'm waiting for a response from you, nothing to lose to new and low and here is the update for the new Version HP Support Assistant downloaded correctly. Since then, I had a glance in the desktop program and there is no warning, everything is up-to-date.

  If all is well now and I can't thank you enough for all your help to try to solve this problem for me. You are the experts, and I was just lucky. I sincerely thank you.

  Best regards

  Gerry

  PS I will now know where to go if I have more problems... experts.

• Testing applications on the new OS update problem

  Can't access settings. When I drag down on the device and click settings, nothing happens.

  How can I turn on developer mode ON?

  It worked for me in another message, if you have the same problem:

  The steps if you have your Dev Alpha brick (just web browser):

  Launch WipeReload.bat

  1. Make sure your mouse is on the disabled button to update your computer
  2. With your Alpha plugged Dev, restart the device (power button for 10 seconds after the countdown shows)
  3. When the alpha dev led red lights, you have a fraction of a second to click on this button in the application instance WipeReload.bat. If you miss it, you will have to wait until the dev alpha starts, and then try again.
  4. Update the device

• After the upgrade to the new version of Firefox, one losing all my tabs, whenever I close. I did what was suggested in the FAQx, but I still lose all when I close. I want to solve this problem. How?

  I want to know how to make my tabs save when I close Firefox. I did what was suggested in the FAQ section, but all my tabs disappear whenever I close Firefox, you use the command "exit", or the "X" button That was the reason I never updated to the new version previously, but hoped that the problem had been addressed and updated, now I'm stuck with having to reopen each tab whenever I open Firefox. Please tell me there is a way to fix this. And I'm not fluent technospeak, so I need simple and basic instructions. Thank you. Mark

  Hello

  By pressing Alt + T on the keyboard displays the Tools menu.
  To see the full menu bar temporarily, press Alt or F10.
  To make the permanently visible menu bar, right-click on the + after the last tab and enable (check) menu bar or press Alt + V > toolbars > menu bar.

  Everything on tools > Options

  Keyboard shortcuts

  ...............................................................................................................................

  Useful links:

  Beyond the tools > Options - about: config

  Subject: config entries

  Information page (Alt + T) tools > Page Info, right-click > view Page information

  View without Plugins

  Files & Firefox profile folder

  Firefox commands

  Basic troubleshooting

  After the upgrade

  Safe mode

  Extensions of the issues

  Troubleshooting Extensions and themes

  Troubleshooting Plugins

  Test Plugins

• I have problems to install the new version of messenger

  would like to download the new version of messenger, but when I try to install it goes to about 74% and then it restores and don't install, then he sends me to the page more or less remove windows live essential but I try but does not currently I have version 2009 (build 14.0.8064.2060) would like to have info thanks.

  Hello BYFIELD, welcome.

  I recommend trying a clean boot to see if maybe parts of the Live Essentials are running in the background. Try this:
  1. click on START

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  5 restart your computer
  Then try to update of Live Messenger. If this does not resolve the problem, try to force - remove the application by Windows Installer Cleanup Utility (WICU)
  1. go to: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe
  2. download the file to your computer, run the package and install the utility
  3. run the utility that should be in your menu START > programs section
  4. Select Live Essentials and run through the process to remove it
  5. next, restart your computer and try to reinstall Live Messenger
  Let us know what happens
  
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Download the new version of iTunes, error 'there is a problem with this Windows Installer package... »

  Original title: Updateing iTunes

  I get the message to download the new version of iTunes.  Whenever I've done, it is unable to complete and gives me the following error.

  There is a problem with this Windows Installer package.  A program required for this install to complete could not be run.  Contact your support personnel or package.

  When you have uninstalled iTunes, did you only use Control Panel > programs and features, or did you follow the instructions here--> https://support.apple.com/en-us/HT204275

  If you uninstall everything as described in the document, and then do the installation should work.

  See also https://discussions.apple.com/docs/DOC-3551

  If you have problems to uninstall the Apple software, see https://support.microsoft.com/en-us/mats/program_install_and_uninstall?wa=wsignin1.0

  And if you still have problems to uninstall the Apple software, see http://www.revouninstaller.com/revo_uninstaller_free_download.html (use the free version).

• Terrible problems of conversion of the site to meet the new version of Muse (and other important observations)

  Dear all

  I was very pleased with the new version of sensitive Muse.

  I had downloaded the pre-release version and tested it and presented my comments as a good obedient of Muse Web site designer, after all, we must all contribute to get the best system that actually works.

  Is the day of release and I've updated Muse via my desktop CC application.

  I watched videos Adobe make reference to liberation, that everything online and even read through the excellent series of video training sensitive to themes of Muse.

  Only some of my clients gave me their business with the understanding that I would like to convert their sites Adaptive desktop, Tablet and phone versions to fully responsive as soon as the new version is out.

  A customer has a big launch very soon which also requires the contents of the site changes so I decided to tackle this site first.

  I made a copy of the site and opened it and it converted or whatever Muse only when you open an existing site in the new face.

  I changed all the settings, site, properties etc etc in the offline version of the page.

  Then, I have worked to make the Master suited page.

  It is then that my nightmare began.

  Nothing seemed to work as described and the biggest problem was the clamp that was so slow, late, dried, etc., it was almost unusable.

  In any case, after 18 hours, the page master has been made and when you preview in the development tools Google Chrome seemed reasonable enough.

  Why 18 hours you might ask, well partly because of the clamp problem mentioned previously, but the entire system is extremely inefficient in the way it works with so many questions to consider whether to apply or not apply to each object and a constant in Google Chrome preview as you could not trust what has been is displayed on the screen of Muse.

  Next challenge was to convert the content of the home page. It wasn't a page complex and only consists of 6 pieces - pictures, text and a button on the State.

  I have applied all the settings and slide the clamp to slightly reduce the width of the browser, that when I had to move showed major problems on the page immediately:

  • Huge empty spaces appeared
  • The objects did not adapted as it should and that I had seen in so many videos - so, for example, if a block of text was next to an image they immediately went massively out of alignment when you drag the clip
  • The finished status button on the margins of the page
  • Etc etc.

  In any case, after 6 hours of tearing my hair that I give up and contacted Adobe.

  They began a session remotely and said I had everything set correctly and that Muse wasn't as the developers had planned.

  Finally, they said by e-mail on the .muse file, which I did, and of course I'm sitting here with a looming deadline and still no answer on how to solve the problems, which no doubt all my other existing sites will not have when I come to convert.

  Other problems discovered during my tests to date are:

  • Right click for very slow service
  • Slow to open library (more despite being told you can download several items from the library when you try to load too, a lot (by Muse) everything freezes Muse and you force a fence via the Task Manager)
  • Adjusting the position of the breakpoint by right clicking on the breakpoint window very slow, late development and jerks (IE just like the clip)

  In addition, I was absolutely horrified to see that there were other issues, especially since many objects react at all:

  • Image do not respond in the envelope
  • Compositions of
  • Slideshows
  • Forms
  • Google maps has only reactive width no height as well
  • Google Map inserted via insert HTML while I updated sensitive width, there is not (I guess the code must be added to make all insert sensitive html and some guidance on what could be this code would be useful Adobe, including a video on the subject feature Muse is so limited you must add a large number of html).
  • YouTube has only reactive width no height so completely useless
  • No effect of scrolling on Muse reactive
  • In addition, virtually all 3rd party widgets Muse themes et al. do not work with response as they say they are waiting for Adobe to undertake the necessary work on base first. So any site that uses widgets cannot be converted (and almost all do so because of the lack of functionality of Muse)

  This Muse is not really sensitive and it is useless to creation or conversion of sites until it is.

  Also, I was extremely disappointed to see that despite me and a lot of other designers asking some features via the Forums Muse he had not been included. This includes, but is not limited to:

  • Draw ellipses (& circles) and polygons that you can in InDesign in forms or frames of image
  • Site search function
  • Images do not clearly appear in the Muse until preview
  • No password protection function
  • Form always using reCAPTCHA 1 not 2
  • No installation on the forms file upload
  • Slideshow of legends still not discoloration with images
  • No idea if all the SEO issues as I cannot finish a site and scan

  What a disappointment is complete.

  So, for me, sorry Adobe not usable as a form builder free site responsive until much more work has been done, hopefully very soon.

  Kind regards

  Mike

  I just spent two weeks, putting in place a sensitive muse site. I am gray, tired and frustrated. I was so excited to make this project work.

  I wish I had read these articles earlier.

• I install the new cc2014 update, but for some reason any in my computer displays double former app and the new, but the new dose did not setup that I have in my old version! What will happen?

  I install the new cc2014 update, but for some reason any in my computer displays double former app and the new, but the new dose did not setup that I have in my old version! What will happen?

  Thanks, I have solved this problem, simply delete the old and manually I have brand new!

• When I click on the right botton I see a small copy of the browser page. This problem on the new version of mozilla. This problem is not presented on 15 version of mozilla.

  When I click on the right botton I see a small copy of the browser page. This problem on the new version of mozilla. This problem is not presented on 15 version of mozilla.

  I think that you run two versions;

  The details of your system to watch;

  Shockwave Flash 14.0 r0 * Shockwave Flash 13.0 r0

• After the update the new version cannot determine file downloads. In the eyes to determine the file, but download files go in C / documents and settings even

  After the update the new version cannot determine file downloads. In the eyes to determine the file, but download files go in C / documents and settings even if I chose another folder

  Hello, there is a general regression in firefox 27 allowing any files to upload directly to a root drive. Please try to create a subfolder (like D:\Downloads) and set as the default location for downloads...

  See also bug #958899.

• Hello! The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that s.

  Hello!
  The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that the server redirects the request for this address in a way that it will never end." How to solve this problem? Please excuse me for my English.
  Sincerely, Vsevolod.

  This can be caused by corrupted cookies or cookies that are not sent or otherwise blocked.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  See also:

  • http://KB.mozillazine.org/The_page_is_not_redirecting_properly
  • http://KB.mozillazine.org/cookies

• Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

  Question
  Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

  Firefox 9 is Compatible with Norton 2011, 2012, 360 v5. See:

  • http://community.Norton.com/T5/Norton-Internet-security-Norton/Firefox-9-support-for-Norton-toolbar/TD-p/615563

• I've updated to Firefox 5, "about Firefox" reveals the new version in the browser window, but my shortcut buttons still accuse "Firefox 4.0 Beta 10"

  I've updated to Firefox 5, under help in the browser button "about Firefox" shows the new version, but my buttons to shortcuts on my monitor still shows "Firefox 4.0 Beta 10". Most updates also update the keys shortcut. Is it possible that I can do this?

  Your user agent indicates that you use Firefox 5. You can change the name of the shortcut to read just "Firefox". You can name a shortcut all you want.

• can quicken 2007 run on El Capitan (i.e., os 10.11)? I have one currently using Yosemite and you want to update without losing the use of Quicken 2007. I don't like the new version of Quicken.

  Can quicken 2007 run on El Capitan (i.e., os 10.11)? I have one currently using Yosemite and you want to update without losing the use of Quicken 2007. I don't like the new version of Quicken.

  Join the club of those of us who don't like Quicken 2015 or 2016 Quicken; even if I bought it for a 40% discount offered by Intuit!  I was just disappointed by Q2016 compared to Quicken 2007!

  If you have upgraded to the 16.2.3, version it will work well in El Capitan!

• I'm trying to update my ipad (first edition) to the new version and after about an hour, I get a message that says unable to finish because the network has expired.

  I'm trying to update my ipad (first edition) to the new version and after about an hour, I get a message that says unable to finish because the network has expired.  How can I fix it?

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  Hello

  You need to support iPad not Microsoft.

  iPad - media choices
  http://www.Apple.com/support/

  iPad - Support
  http://www.Apple.com/support/iPad/

  iPad - communities (Forums)
  https://discussions.Apple.com/index.jspa

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">