The number of cores!

Similar Questions

• The number of cores in Windows Vista can support?

  Windows Vista is able to make full use of Intel Core i3, i5, and i7 processors?

  If not, the number of cores maximum Windows Vista can handle?

  Rannvijay Kapoor

  Hello

  Yes Vista can support all the people and all the kernels. Of course the material must also
  support for Vista that shouldn't really be a problem.

  Note here that Vista supports an unlimited number of hearts. There are limits on the
  the number of physical processors.
  http://www.ExtremeTech.com/Article2/0, 1697,2068721,00.asp

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• The number of cores CUDA makes a big difference in performance for first?

  Hi all

  After reading all the blogs from Adobe on the increase in performance with a GPU that has available CUDA, I couldn't find a reference to the number of cores is optimal. There, looking graphics cards from NVIDIA 970 and 980's to be precise, there is a # wildly different CUDA cores depending on the configuration of the card. Some I've seen with less than 1000 CUDA cores vs some with over 2,500.

  Any information out there that relates to this?

  Thank you!

  * steve

  Is based on the media you are working with. 1080 media normally requires not much more than a 980GTX card, unless delays are complex to allocate GPU accelerated effects. A card 960GTX or 970GTX are normally more than enough for 1080 media and most workflows. When you arrive at the media over 4K then you want the card 980Ti ideally. The 970GTX and the 980GTX will handle 4K media ok but not as well as the 980Ti. If the Publisher is using as well other apps like Davinci Resolve, then you will definitely want the 980Ti and perhaps the map of Titan X. The Titan X card but is not required for Adobe since none of the Adobe applications to date have used even the 6 GB of vram on the map of 980Ti.

  Eric

  ADK

• VM is to have 1 CPU, can we reduce the number of core for CPU.

  VM is to have 1 CPU, can we reduce the number of core for CPU.

  
  

  
  

  In this article: the number of cores per processor in a virtual machine (1010184)

• PowerCLI - get the number of cores per processor and number of Sockets

  Greetings,

  We are responsible to give a list of all our virtual machines with their host name, the number of CPUs, the BONES and the number of cores per processor for verification.

  I immediately said that this would not be a problem with PowerCLI. However I seem to have more trouble with it than expected.

  Get the number of CPUS is not a problem, but the time wherever I want to divide the number of cores and the number of sockets, it seems to hit a dead end.

  I found the following entries of the community concerned:

  Re: vSphere 5. Casings of vCPU and cores per CPU (PowerCLI) bug

  Machine virtual access avancΘs | VMware vSphere Blog - VMware Blogs

  Parameters to retrieve and set Advanced Configuration (VMX) VM

  But neither seemed to give me the right input. The advanced configuration settings do not appear to contain the number of cores/sockets and Get-View and Get - VM normal controls do not seem to differentiate between carrots and the power outlets and just give the number of processors.

  Because we need these settings for a check I doubt I'm the first to need this information. Does anyone have an idea how to get this information?

  Please note that it is the number of cores and casings of a VM, not an ESXi host.

  Thanks in advance,

  Bram

  	$result = @)
  	$vms = get - view - ViewType VirtualMachine
  	{foreach ($vm to $vms)
  	$obj = new-object psobject
  	$obj | Add-Member - MemberType NoteProperty-name name - value $vm. Name
  	$obj | Add-Member - MemberType NoteProperty - name CPUSocket-$vm.config.hardware.NumCPU value
  	$obj | Add-Member - MemberType NoteProperty - name Corepersocket-$vm.config.hardware.NumCoresPerSocket value
  	$result += $obj
  	}
  	$result

• How can I know the task manager the number of cores is enabled

  at the start of my computer says I have three nuclei activated - but my processor has four cores. How to check this by using the Task Manager

  In the Task Manager, click the performance tab. The no. graphics in the CPU usage history shows no. carrots.

  For example, I have 8 graphics, which means that I have 8 cores.

• Set the number of cores in Fusion 3.1

  "About this Mac" told my MBP i7 has 1 processor with 2 hearts, but my VM settings page allows me to choose up to 8 cores. First of all, can you explain the difference, or point to a link that goes on this in depth? Then, should I keep the VM to 1 core or bump it up to 4?

  As your system only has one processor with two cores you should just use a carrot into the Virtual Machine as a plus, in general, probably only will degrade performance.

• How to change the number of processors / cores

  I have virtual machines that I have to move periodically between 3 computers main host that I use:

  1 Intel Core 2 Quad CPU with Windows 7 Home Premium 64 - bit - 1 processor with 4 cores

  2 Intel Core i7-2630QM CPU with Windows 7 Home Premium 64 bit - 1 processor with 4 cores

  3 Intel Core 2 Duo T7700 CPU VT with Windows XP 64 bits - 1 processor with 2 hearts

  Hosts running VMWare workstation 7.

  Most of my virtual machines running XP 32 bit and have been initially created for my 3 platform.

  When I move my machines between computers I see that the parameters of the Virtual Machine for my change of processor in (for me)
  in unpredictable ways. Sometimes it shows 1 processor and gives me a choice of up to 4 cores.
  in other cases (always on a 4 base platform) 1 single processor with 1 core, in other cases, with 1 core 2 processors.

  In most cases, my freedom of choice is limited, because the selection of the number of cores is grayed out.

  When I try to make changes by editing the vmx file, I find them ineffective (no change).

  The other problem I think is that my VMs run VERY SLOWLY on my i7 with 8 GB platform!
  I have no idea if this is related to the improper setting of the number of processores / cores (I'm not able to define
  1-4-hearts and spin with settingsd 1.1 instead).

  Could someone please help me understand how:

  1. check / change the number of processors / threads on an existing virtual machine.

  2. how to set properly for an i7 processor

  Thanks in advance,

  Andrew

  1. providers that create virtual machines are in a race - they assume that customers use this version which proposes to use the virtual processors more ;-)
  For some workloads inside a virtual machine - say Oracle or other database and applications servers such that it is sometimes really good idea to use more than one virtual processor

  2. virtual machines to scale differently with more CPU than the real computers.
  Virtual machines are for host applications.
  This means that the host schedules the time CPU to each virtual machine.
  If you follow this thought that you will see that a virtual machine that uses one virtual processor has a greater chance to run then a VM with 2 virtual processors.
  A VM with 4 cores running on a host with 4 cores will spend a lot of wait time - it may work only when the host reports the application of Workstation 4 hearts are available.

  A virtual machine with only 1 vCPU will probably be able to run all the time without any waiting time.
  This is why usually with a single CPU VMs feel better to the needs of the user.

  This translates into the best practical advice: assign a CPU unless you really notice you need more.

  3. probably, you try to change the values, while the virtual machine is suspended?

  4.
  numvcpus = '8 '.
  cpuid.coresPerSocket = "4".

  We hear two processors with 4 cores of each

  numvcpus = "4".
  cpuid.coresPerSocket = "4".

  means a processors with 4 cores

  numvcpus = '2 '.
  cpuid.coresPerSocket = '1 '.

  We hear two processors with a carrot

  No effect? n ' mind that not all clients can use 2 or more processors
  For example, XP is limited in this respect.
  Some guests may also not change the number of CPUS after what they have been installed

• Get the number of vCPU (hearts by shocket) for vCenter VM

  Hello..

  I'm changing vCPU number scale using a script. I succeeded when the number of cores by shocket is 1, but this does not work if the number of cores, it's more than one, so I want to check the number of cores per VM shocket.

  Please help me get number of vCPU (hearts by shocket) for vCenter VM. Answer as soon as possible it's urgent...

  Thank you!!

  Looking for: vm.config.hardware.numCoresPerSocket where vm is an VC:VirtualMachine object.

  Your total number of cores would be (numCoresPerSocket x numCPU)

  Check this for some more tips: numCoresPerSocket

• VMware vSphere 4 licenses essential question and the number of processors

  Hi all

  I have a question about the Essentials of VMware vSphere 4.1 license. We have a client interested in a VMware vSphere Essentials license. The machine runs on 2 x processor Xeon 5675 6 c. Now I read somewhere that there was a limitation of the number of processors that can be used with the edition of Essentials. If I remember correctly, the number of physical sockets is limited to 2, but I remember that there is another limit, but I could not find the document describing and wonder:

  Is there a limitation on the maximum number of 4 cores on one physical processor that can or will be used by VMware vSphere 4.1 Essentials or there is a limitation on the number of 4 vCPU that can be assigned to a guest?

  I would like to know because if this is a limitation on the number of vCPU that can be assigned to a customer that would not be a problem because we have no guests in need of vCPU, then 2 more, but if this is a limitation on the number of cores that would be used by VMware vSphere Essentials, it would be a waste of money to buy a 6-Core ;-)

  Hello.

  2 taken with 3 guests, 6 hearts and SMP 4 lanes for virtual machines.

  These limitations are available at: http://www.vmware.com/products/vsphere/buy/small_business_editions_comparison.html

  Good luck!

• Does anyone know if you are limited in the number of characters in the text field?

  I have the scrolling text of the distant rear side right up to the edge on the left front. I only get to halfway through the message of full text and letters are mixed at the any end. is there a limit on the number of characters I can use? Is there a setting a limitation I can increase?

  It seems to be. I figured it at approximately 16000 characters more or less (or even lower). (Estimated from the original character TextEdit limit as it seems to be this type of core service text text handling in movement and FCPX.)  I drew this conclusion during the development of a method to create a movement subtitles. It finally turned out that I had to cut the scripts into pieces 'chapter of size' to keep the character countdown. I never got to finish this tutorial and it has been quite some time now (and I can't not find my notes on the subject). It could be that the number of characters estimated is actually lower.

  There is no way to reset the limit.

• Several times during ≥ 3 years the number pad on my keyboard stopped working.

  Several times during ≥ 3 years the number pad on my keyboard stopped working. This problem has covered ≥ 2 different versions of OS X, the most recent event: El Capitan, first event: Lion or Lion of Mt.; door only on the pavement &. [DOT] & ENTER [the top row keys are OK because r =, /, *, -, +, & ENTER.]

  Machine was born @ 2012; the details are below & pulled... iMac > material file.

  Model name: iMac

  Model identifier: iMac12, 1

  Processor name: Intel Core i7

  Processor speed: 2.8 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 8 MB

  Memory: 16 GB

  Boot ROM version: IM121.0047.B23

  Version of the SCM (System): 1.71f22

  Serial number (System): D25FX1WLDHJT

  Material UUID: 1AAD5CA2-316C-5453-9A0A-2A0F3F2B8946

  I pressed @ each assortment of keys & combination of buttons & have not been able to restore a digital key function. What happened to 2 x before. Whenever I accidentally pressed the super-secret key combination to induce the restoration. I suspect the same or similar to the combination, I pressed to screw it up in the first place. I looked in the various pages of PREFERENCE: keyboard > sources of input, and al. Notice to lovers in the Department for help. My only condition is please do not too stupid to me. Thank you, community.

  Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.

• number of Core

  Hello

  'Number of Core' means the number of processor? Thus, we can say that CPU i5 - 2430M has 2 processors?

  Many thanks & best regards,

  Human

  Thank you & Best Regards,.
  Human

  The Intel Core i5 - 2430M processor has two hearts and two processors on the same chip. That put two processors on the same motherboard, although they have the same power supply.

• What is the number of processors and maximum memory options in MSCONFIG?

  MSCONFIG (START)... Who can tell me what that? !!
   
  http://www.HTPC-reviews.com/wp-content/uploads/2012/08/speedup_windows7.jpg

  This photo... It's the MSCONFIG window

  64-bit Windows 7

  who can tell me what is 'exactly' the real role of:

  -Number of processors
  -Maximum memory

  because

  I have i7 with 8 processors and when I chose (number of processors) 8 processors, that nothing has changed! It's same as 0.
  and I have 6 GB of ram and when I chose (maximum memory) = 6 GB, nothing has changed, but became 5 GB in the Task Manager!

  What is - c!

  can someone help me please!

   
  Hello
   
  These options to limit the use of processors and memory to the specified value. If you want windows to use all available processors and memory, you must leave two options not controlled.
  When the number of processors option is set to zero, Windows will use all available processors.
  If you recently changed the processors, this may help: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/howto-get-windows-7-to-detect-your-new-multi-core/71519d51-f6cb-47df-b3ff-66c2928d6de4
   
   

  Hope this information is useful.

• EPM 11.1.2.4 number of cores

  Hello gurus of the EMP.

  As soon as we have an EMP 11.1.2.4 system installed, configured, and running.

  Can I change the number of processors (or numberOfCorescores) on a machine running the service of the Foundation.

  There are some parameters on

  • HSS_COMPONENT_PROPERTY_VALUES in the reposotry.

  When you run installation Machine1 had 4 Cores, now he has 8 cores.

  We have a Standard deployment with 2 virtual machines...

  
  

  Machine1 (8 CPUs)

  Foundation

  Planning

  HPCM

  FDM

  Disclosure Mgmt

  Strategic end

  Computer2 (4 CPUs)

  Essbase

  Thank you!

  Best,

  Abhishek G.

  Yes, you can stop the virtual machine, increase the number of vCPUs and then put it online, it has need of no additional configuration on the side of the EMP.

  I wouldn't worry about what is in the registry of the EMP autour carrots, if you really want to change it, you can use the epmsys_registry tool.

  for example

  run a registry report to find the host ID

  updateproperty #fa4759bd9e4389e5ea22732149ebcc9009S7fff/@numberOfCores 8 epmsys_registry

  See you soon

  John