The OAM Console in a deployment architecture high availability

Similar Questions

• Deployment of high availability of the IPCC 4.5

  In a future HD architecture implementation, the voice service will provide CallManager 5.0, that will integrate with 4.5 of the IPCC. 4.5 (required with 5.0 CM) IPCC does implement a high availability. How can we ensure that technical support continues to operate if the IPCC goes down? One possibility might be to configure CM such that if the IPCC goes down, all the number of help desk calls are automatically and immediately headed to a group (which includes all extensions help desk). This redirection can be configured in CM? Is there a better option?

  Thanks in advance,

  SB

  This is your best bet. On the road Points for your call center just put the call before busy, no answer and failure to the fighter pilot. Thus, when the IPCC Express Server is down it will sent to your fighter pilot.

  Please evaluate the useful messages.

  adignan - berbee

• Not able to access the Console of the OAM?

  Hi all

  I am facing this problem while I try to connect to the console of the OAM, when the managed server is started I am not able to access the Console of the OAM, but when I stopped the managed server, I am able to access the Console of the OAM. Please guide me on this.

  I need documentation on how exactly the work of the Console of the OAM.

  Thank you

  SJ

  Hi Laura,

  Thanks for giving your valuable time, I was able to understand the question. LoadBalancer settings pointing to another machine where I had not installed OAM.

• How to cancel the deployment of a MDS SOA from the EM Console or Jdeveloper?

  Hello

  Due to significant changes, I want to cancel a previously deployed MDS deployment in our soa-infra and redeploy a new.

  could someone please guide me on how to do it from the EM Console or Jdeveloper?

  Thank you

  Tushar

  Hello

  I think that what you want is to remove metadata from your MDS repository.

  To do this, from the EM console:

  -click right on your soa-infra and select configuration MDS under Administration

  -Click on Runtime MBeanBrowser

  -Go to the operations tab

  -Select deleteMetadata

  -on the input docs just use * to remove all metadata on your MDS.

  -call the operation

  Note that you can specify a path inside your MDS if you do not want to clean up, by example/apps / *.

  Concerning

  Tiago

• Cannot connect to the console of the OAM after upgrading OID to 10.1.4.3

  Hi all
  
  OAM use OID for user store.
  The versions of the components are:
  OID 10.1.4.3
  OAM 10.1.4.3
  
  Recently, I upgraded OID 10.1.4.3 and after that I'm unable to connect to the console of the OAM. However, the OID and OAM services are started without any error.
  
  The error message shown in the access server logs is:
  
  'Directory is inaccessible, downwards, or the incorrect connection settings were specified' userid function ^ LDAPAsyncSimpleBind () ^ cn = sleep
  
  I have modified the parameter LDAPMaxNoOfRetries the value 3 in all components of the OAM and restarted their. The issue is still not resolved.
  Please help if you have seen this behavior.
  
  Thank you
  Mahendra.
  
  Thank you
  Mahendra.

  Hi Manon,.

  Apply under ldif file and restart OID.

  DN: cn = dsaconfig, cn = configsets, cn = oracle internet directory
  ChangeType: modify
  replace: orclinmemfiltprocess
  orclinmemfiltprocess: (|) (! (obuseraccountcontrol=*)) (obuseraccountcontrol = Activated))
  orclinmemfiltprocess: (|) (obuseraccountcontrol = active) (! (obuseraccountcontrol=*)))
  orclinmemfiltprocess:(obapp=groupservcenter) (!) () obdynamicparticipantsset = *))
  orclinmemfiltprocess:(objectClass=oblixworkflowinstance)
  orclinmemfiltprocess:(objectClass=InetOrgPerson)
  orclinmemfiltprocess:(objectClass=oblixorgperson)
  orclinmemfiltprocess:(objectClass=oblixworkflowstepinstance)

  Let me know the result.

  Concerning
  GK Goalla

• Newbie - how to check the deployment descriptor in the Weblogic console?

  Hello
  I deploy an application developed with JDEV 11 g, deployed to the file. WAR in JDEV, deploy the WAR file to the weblogic.
  When I test it in the weblogic console, I deployed it and active, I'm going to test and the test Point of the URL is in the form
  
  http://10.10.74.20:7003 / simple_jsp-Project1-context-root /.
  
  that gives me, I get a 404 error.
  
  Where can I check the deployment descriptor in the console of all the other things I need to check?
  
  Thank you
  
  Anatoliy

  Hello

  AFTER WLS8.1 version AdminConsole does not provide the functionality to display the deployment descriptors in XML format inside the console...

  In your * "WEB-INF/web.xml" * file please add the following line: in the below please enter your own file name

  
  index.jsp
  

  To change the root of context in WEB-INF/weblogic.xml next entry is necessary:

  
  
  YourContextRoot
  
  .
  .
  .
  Thank you
  Jay SenSharma
  http://jaysensharma.WordPress.com (WebLogic wonders are here)

• cannot publish but manual can't deploy to the administration console

  Hello

  I work on a project with spring 4.23, 4.03 spring-security. Work well with weblogic maven plugin, I can deploy on the weblogic 12.1.2 without problem.

  But when I use the strange thing of service edition arrives and the publication has not, I am sure that I have @EnableWebSecurity and @Configuration in my SecurityConfig file

  Kindly help me to understand what goes wrong, thank you.

  Here is the error:

  weblogic.application.ModuleException: java.lang.IllegalStateException: org.springframework.security.config.annotation.ObjectPostProcessor is a required bean. Make sure that you have used @EnableWebSecurity and @Configuration

  java.lang.Exception: Exception received from the pilot deployment. Check the log of the errors discovered for more details.

  at oracle.eclipse.tools.weblogic.server.internal.DeploymentProgressListener.watch(DeploymentProgressListener.java:189)

  at oracle.eclipse.tools.weblogic.server.internal.WlsJ2EEDeploymentHelper.redeploy(WlsJ2EEDeploymentHelper.java:644)

  at oracle.eclipse.tools.weblogic.server.internal.WlsJ2EEDeploymentHelper.deploy(WlsJ2EEDeploymentHelper.java:474)

  at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishWeblogicModules(WeblogicServerBehaviour.java:1455)

  at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishToServer(WeblogicServerBehaviour.java:913)

  at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishOnce(WeblogicServerBehaviour.java:704)

  at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publish(WeblogicServerBehaviour.java:555)

  at org.eclipse.wst.server.core.model.ServerBehaviourDelegate.publish(ServerBehaviourDelegate.java:774)

  at org.eclipse.wst.server.core.internal.Server.publishImpl(Server.java:3172)

  to org.eclipse.wst.server.core.internal.Server$ PublishJob.run (Server.java:345)

  at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)

  Caused by: weblogic.application.ModuleException: java.lang.IllegalStateException: org.springframework.security.config.annotation.ObjectPostProcessor is a required bean. Make sure that you have used @EnableWebSecurity and @Configuration

  at weblogic.application.internal.ExtensibleModuleWrapper.start(ExtensibleModuleWrapper.java:140)

  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:124)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:213)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:208)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:70)

  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:24)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:729)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:258)

  at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:48)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:165)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)

  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:586)

  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:148)

  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:114)

  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:339)

  at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:846)

  at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1275)

  at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:442)

  at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:176)

  at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)

  in weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 100 (DeploymentReceiverCallbackDeliverer.java:13)

  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 2.run(DeploymentReceiverCallbackDeliverer.java:68)

  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:550)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:295)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:254)

  Caused by: java.lang.IllegalStateException: org.springframework.security.config.annotation.ObjectPostProcessor is a required bean. Make sure that you have used @EnableWebSecurity and @Configuration

  to org.springframework.security.config.annotation.web.configuration.WebSecurityConfigurerAdapter$ 1.postProcess(WebSecurityConfigurerAdapter.java:79)

  at org.springframework.security.config.annotation.web.configuration.WebSecurityConfigurerAdapter.getHttp(WebSecurityConfigurerAdapter.java:172)

  at org.springframework.security.config.annotation.web.configuration.WebSecurityConfigurerAdapter.init(WebSecurityConfigurerAdapter.java:290)

  at com.gammon.pcms.config.SecurityConfig.init(SecurityConfig.java:0)

  at org.springframework.security.config.annotation.web.configuration.WebSecurityConfigurerAdapter.init(WebSecurityConfigurerAdapter.java:67)

  at com.gammon.pcms.config.SecurityConfig.init(SecurityConfig.java:0)

  to com.gammon.pcms.config.SecurityConfig$ $EnhancerBySpringCGLIB$ $66e1b5df.init (< generated >: 0)

  at org.springframework.security.config.annotation.AbstractConfiguredSecurityBuilder.init(AbstractConfiguredSecurityBuilder.java:370)

  at org.springframework.security.config.annotation.AbstractConfiguredSecurityBuilder.doBuild(AbstractConfiguredSecurityBuilder.java:324)

  at org.springframework.security.config.annotation.AbstractSecurityBuilder.build(AbstractSecurityBuilder.java:41)

  at org.springframework.security.config.annotation.web.configuration.WebSecurityConfiguration.springSecurityFilterChain(WebSecurityConfiguration.java:105)

  to org.springframework.security.config.annotation.web.configuration.WebSecurityConfiguration$ $EnhancerBySpringCGLIB$ $d9c7728c. CGLIB$ springSecurityFilterChain$ 2(<generated>:0))

  to org.springframework.security.config.annotation.web.configuration.WebSecurityConfiguration$ $EnhancerBySpringCGLIB$ $d9c7728c$ $FastClassBySpringCGLIB$ $d5f1163a.invoke (< generated >: 0)

  at org.springframework.cglib.proxy.MethodProxy.invokeSuper(MethodProxy.java:228)

  to org.springframework.context.annotation.ConfigurationClassEnhancer$ BeanMethodInterceptor.intercept (ConfigurationClassEnhancer.java:318)

  to org.springframework.security.config.annotation.web.configuration.WebSecurityConfiguration$ $EnhancerBySpringCGLIB$ $d9c7728c.springSecurityFilterChain (< generated >: 0)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  at org.springframework.beans.factory.support.SimpleInstantiationStrategy.instantiate(SimpleInstantiationStrategy.java:162)

  at org.springframework.beans.factory.support.ConstructorResolver.instantiateUsingFactoryMethod(ConstructorResolver.java:588)

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.instantiateUsingFactoryMethod(AbstractAutowireCapableBeanFactory.java:1123)

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBeanInstance(AbstractAutowireCapableBeanFactory.java:1018)

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:510)

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:482)

  to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:306)

  at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:230)

  at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:302)

  at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:197)

  at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:296)

  at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:197)

  at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:772)

  at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:838)

  at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:537)

  at org.springframework.web.context.ContextLoader.configureAndRefreshWebApplicationContext(ContextLoader.java:446)

  at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:328)

  at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:107)

  to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:661)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:57)

  at weblogic.servlet.internal.EventsManager.executeContextListener(EventsManager.java:241)

  at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:198)

  at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:186)

  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1783)

  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2807)

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1661)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:822)

  to weblogic.application.internal.ExtensibleModuleWrapper$ StartStateChange.next (ExtensibleModuleWrapper.java:360)

  to weblogic.application.internal.ExtensibleModuleWrapper$ StartStateChange.next (ExtensibleModuleWrapper.java:356)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  at weblogic.application.internal.ExtensibleModuleWrapper.start(ExtensibleModuleWrapper.java:138)

  I fixed that with the help of the link below:

  https://github.com/spring-projects/spring-loaded/issues/49

  I have replace under method in my SecurityConfig:

  @Override

  @Autowired

  public void setObjectPostProcessor (ObjectPostProcessor

• High availability of components in the design of vWorkspace tips

  Hi all

  Would ask you some advice regarding the design of vWorkspace components highly available. Suppose that vWorkspace components will be deployed in vSphere or hypervisors managed SCVMM hence HA is in place, if the failure of a host. In this situation, if we still need components redundant (n + 1 VMS) vWorkspace?

  On the other note, I understand that we can add a couple of broker for vWorkspace in vWorkspace Management Console connections and based on KB 99163 it would just work. I'm not sure how the traffic would be when an application is web access? As in, I guess that the connection broker news would be 'defined' at the request of the web call to the broker for connections. Or this is done automatically? Access Web would choose randomly from the broker for connections to go?

  Thanks for any advice in advance

  Kind regards

  Cyril

  Hi Cyril,.

  Big questions. As with any IT architecture in layers, you must plan HA and redundancy at all points of failure required by your environment or level of Service (SLA) agreements. For vWorkspace, the center of his universe is SQL and you must plan accordingly the failure and recovery. In some environments, full backup can meet the requirement of HA. In others, full SQL Cluster, Mirroring, replication, or Always-On configurations may be required. With our broker, we recommend N + 1 deployment in most scenarios HA. When you move peripheral components or enabling, you must evaluate each component and needs its impact of failure as well as its valuation to determine the appropriate AP.

  Load balancing between several brokers is done automatically by logic in the client connectors. In the case of Web access, when you configure the site Web Access in the Management Console, it includes broker list in the Web access configuration xml file. As client connectors, Web Access includes balancing logic that distributes the client load on brokers available automatically.

  If you have any questions about specific components and requirements of HA or architecture, please add them in the discussions.

• Requests deployment architecture Oracle Timesten Geo-redundent

  Hello
  
  We have 6 sites and each site to connect with the line of lease.
  
  There are 5 different physical Remote Site, we want to deploy the database to the active / standby timesten on 5 sites
  We want to create READ ONLY CACHE LOCAL GROUP for each 5 Sites which is unique site automatic updating (2 node RAC) Central database
  Data changes always happen on the Central Site.
  
  Oracle timesten active / standby is LAN on each site, but each site is connected via WAN to the Local Central site where the Oracle RAC database
  and configure the Cache to connect each site for Auto refresh read only Cache and a Local Group on each site.
  
  
  OVERVIEW OF THE ARCHITECTURE
  
  Remote Site location-1 == > (read cache only Local Group) Oracle TT c/o < < = auto-refresh <-|
  ||
  Location of Site remote-2 == > (read cache only Local Group) Oracle TT c/o < < = auto-refresh <-| (CENTRAL LOCATION)
  ||
  Remote Site location-3 == > (read cache only Local Group) Oracle TT c/o < < = auto-refresh <-| (Database RAC 2 knots)
  ||
  Remote Site location-4 == > (read cache only Local Group) Oracle TT c/o < < = auto-refresh <-|
  ||
  Remote Site location-5 == > (read cache only Local Group) Oracle TT c/o < < = auto-refresh <-|
  
  We pass below Oracle technical document.
  http://www.Oracle.com/technetwork/database/performance/WP-IMDB-cache-130299.PDF
  Please check the Figure 7 == > differentials Autorefresh of Read - Only Cache of local groups
  
  Please suggest your advice and your suggestion for above deployment architecture
  
  Concerning
  Hitgon
  
  Published by: hitgon on 10 July 2012 18:44
  
  Published by: hitgon on 10 July 2012 18:46

  There are many things that you must understand and keep in mind when implementing a complex system, and it is oexception n. You should start by studying documentation TimesTen. In particular you should familiarize yourself with the information in the Cache User Guide and the Guide of the replication. These contain a lot of very important information regarding the installation/deployment and operation c/o pairs and groups of cache, configuration cache link for CARS etc. You should also read through the troubleshooting guide to familiarize yourself with what things to look if things do not seem to work as expected.

  If you are not already familiar with TimesTen, I would also highly recommend that you take the time to read the rest of the documentation. TimesTen is not Oracle Db and it is very compatible with Oracle in many areas, there are also many significant differences you need to consider when developing applications, management of the etc system, if you are able to take a training course OR on Timesten then I would recommend but if not then read the documentation is a good second best.

  It is "not recommended" operating systems specifically, but 64-bit Linux is definitely a good choice. You might consider Oracle Enterprise Linux instead of Redhat; It has some advantages.

  In each site, the two nodes in the pair of active / standby TimesTen should be on the same local network. I would recommend GigaBit ethernet as a minimum.

  Although it is possible to write your own scripts much easier (and much more robust) handful of deployment, monitoring, failover and recovery of pairs a/s there a lot, if you deploy Oracle Clusterware on each site for automated management of the pairs a/s. It is our strong recommendation and is also recommended.

  From a point of view TimesTen, system clock synchronization is necessary within each site (i.e., the clocks on both nodes in a system have? Pair of S must be closely aligned). However, it may be desirable to have all nodes in all sites have their clocks in line for other reasons.

  You must ensure that the bandwidth and latency of the WAN connections is sufficient for the amount of traffic to refresh you. There is no simple way to estimate/calculate this. you will need to determine empirically.

  These are probably the most important things. As you progress, you can of course ask questions in this forum and use Oracle.

  Chris

• Last game of password on the Web Console

  We migrate to ARS 7 and do not want more to deploy the MMC on user/operators. They must use the web console.

  I have a request of operators: they want the equivalent of the "Additional account information" tab to the web console.

  I customize the form of user properties by adding a new entry different on this subject Advanced account info tab.

  Now I'm stuck on how to add the last set password property. Any help on how to do this would be greatly appreciated.

  PS: I found an old post about it on the forum, but the link provided on the resolution is no longer available.

  Concerning

  Active calculates the field 'Password last Set' based on the PWDLastSet attribute.

  This value is stored to the whole time format, also known as "LDAP/FILETIME.

  For example, 131167085140000000 is at the present time from Friday, August 26, 2016 18:08:34 GMT

  For this display in a user-friendly format, you would have a solution to script and store the result in a virtual attribute as a string. This virtual attribute would then be displayed.

  The script itself should be simple enough (unless you want to enter in the zone of fantasy and conversions to DST - which can be quite annoying), and you can have triggered it by a workflow so that updates to the PWDLastSet automatically trigger the script, which in turn will update your virtual attribute. You may also need to run a script to fill existing users with a value for the new attribute. PowerShell has several solid time conversion methods and would be a good choice for this application.

• Install the Cloud control 12 c high availability

  Nice day

  I install cloud control high availability, but when I install the third-party certificate services are not available when I check for HTTP.

  I followed the following guidelines:

  Deployment of a cloud of highly available 12 control Enterprise Manager:

  http://www.Oracle.com/technetwork/OEM/framework-infra/WP-em12c-building-HA-Level3-1631423.PDF

  And third-party certificate configuration, note:

  NOTE: 1399293.1 -EM 12 c Cloud control how to create a portfolio with certificate of third party trust that can be imported in the WHO of communication SSL?

  I have a few questions

  How can I change the CA in the OMS?

  How to export the certificate and key?

  Can someone help me, please

  Best regards

  Alexandra Granados

  Hello

  Please follow the steps below...

  EM11g / EM12c: utility ORAPKI to create a portfolio with third party to trust certificate and import into OMS [ID 1367988.1]

• Cannot use the client console discovers vGpu 6.1

  Hi all

  I'm unable to use the client console after deploying machine put in common, I see a black screen.

  Master image work of the console very well and when I connect via the customer direct access overview and breath all work very well.

  I have a virtualized environment based on vsphere esx 6.0, view Server 6.1 and Nvidiia vib file NVIDIA-vgx - VMware_ESXi_6.0_Host_Driver_346.42 - 1OEM.600.0.0.2159203.vib (for cards NVIDIA K1).

  Best regards

  Once the NVIDIA driver is installed and enabled, it disables the display of the console, so this is of design and a sign of properly working config.  Direct connection is the right way to proceed, not RDP as this will bypass our driver.

  -Luke

• What is the location of the file of the Java Console on a Windows XP system?

  I forgot the location of the Java Console content on a Windows XP system file.

  Someone would be kind enough to remind me? Thanks in advance for your help.

  They should be in this folder:

  C:\Documents and Settings\ - user - \Application Data\Sun\Java\Deployment\log

  Replace '- user -' by the user.

• Please help me on the jdeveloper to weblogic application deployment

  At the beginning I just thought after developing an adf application then just deploy as an .ear file and deploy it in the weblogic console and everything will be ok. But actually I had a lot of problems. Then I had a tutorial for it and I do what he says step by step, but some new problems occurred. This is the tutorial I mentioned: [how-to: ADF Deployment Guide | http://www.oracle.com/webfolder/technetwork/jdeveloper/howto/11114/managedserver/wlsadfms.htm]
  
  Now, could someone tell how did deploy your adf application?
  
  Here are the errors I got.
  
  It's the packege of installation and the operating system I use:
  1. 6.3_x64 + jdeveloper11123.jar(include wls10.3.5) + adr centOS (the package name is ofm_appdev_generic_11.1.1.6.0_disk1_1of1.zip) [and earlier, I used a solaris11 of oracle vm and install jdeveloper11.1.2.3, the same probem occurred as CentOS.]
  2 Win7_x64 + jdeveoper11123.exe(include wls10.3.5) + adr mentioned above
  
  Here are the problems I get:
  in case 1, after that I installed the jdeveloper (using the sun jdk 1.7), the weblogic seems to be fine but I na not configure a domain. But after I opened a
  request (which I get from the oracle jdeveloper tutorial demo, which works well in my Win7 env) and I run it, the integrated weblogic can not get
  has started. First in the console it says identifier jrocket - is not recognized, then I edit the setDomainEnv.sh and the startWebLogic.sh file in the
  integrated wls area (that of the Director of .jdeveloper) to assign to the variable JAVA_VM - server. After that another problem emerged: when the
  WLS goes to the 'start-up' status, it is blocked and I turn to System Monitor shows only a thread of java using more than 1 GB of memory in my system
  and occupy 150% of my cpu (it's a dual-core computer). I wait about 5 minutes, when an error came up said "PermSize is too small".so I change the
  setDomainEnv.sh file to set the PermSize be 1024 m and MaxPermSize to 2048. (the name of the variable is something like that, maybe not the)
  exactly on time. "I think you can understand that one is). But the problem is still there.
  
  then in 2 cases in the first place the jdev and integrated wls works fine, but when I deploy an application that works well in one ear of the file, and then deploy it to a
  WLS (10.3.5) autonomous it never Works.the dumb mistake is something libraries of reference/dependencies was not found. Then I tried again a server connection to
  the autonomous wls and I got the tutorial [how_to_deploy_adf | http://www.oracle.com/webfolder/technetwork/jdeveloper/howto/11114/managedserver/wlsadfms.html], as the tutorial says I my standalone patch
  WLS with adr and everything is fine, no error reported. Then I tried the new server in the new slot machine the adminserver management and apply the
  the ADF model in him will overload / console em. But after I restarted the new server (by the console, and then by file stop + startweblogic.bat) the server is running
  the application in the new server is just 'not available '. I tried for three times in three computer, two of them are running win7, it runs Windows XP.
  
  I don't know what the problem is and I'm quite a beginner on this subject. Someone help me please. Thank you very much!
  
  respect, Neo.

  Neo,
  There are a few problems. First of all, jdev comes with its own jdk provided in the product (jdk 1.6_x). The next thing is that if you use JDev 11.1.2.3.0 to build an application you must use a wls 10.3.5 and 10.3.6 where you need to install the appropriate on runtime. In your case, you first install adf runtime 11.1.1.6.0 and then you need to install two patches that update the adf to 11.1.2.3.0 life. These husks are only available through support.oracle.com, which means that you need a support contract to get.
  More information you can find in my blog http://tompeez.wordpress.com/2011/09/14/jdeveloper-versions-vs-weblogic-server-versions/
  The rest of your problems disappear once you have installed the adf right on your server runtime.

  Timo

• Need help to change the display resolution the VMA console

  I installed the VMA app and I'm able to use it.  Unfortunately, the console screen resolution is not high enough (output is difficult to read with low resolution).  Please let me know if you have instructions on how to change it and thanks in advance.

  How do you access the vMA console? What is the resolution of your monitor? You must use a SSH client.