Similar Questions

• WCS contributor UI Dashboard customization

  Hi Experts WCS,

  A simple question, if all goes well, can get help here. I need to customize the dashboard of the contributor UI for adding a Widget and pull the remaining assets updated to display.

  More documentation of Oracle https://docs.oracle.com/cd/E29542_01/doc.1111/e29634/cust_dashboard.htm#WBCSD6230 added the widget dashboard, the default value is only showing 'Name' and 'Typical'. Necessary to also show a column with UpdatedDate, I did as well with the personalization of //Sites/11.1.1.8.0/Shared/elements/CustomElements/ < mySiteName > /UI/Layout/Utils/GridConfig.jsp and GridHtml.jsp.

  Question:

  (1) how can I display the date in the required format? Currently the date column shows a string of long date as "20151120044818129".

  I tried the following two in GridConfig.jsp but without effect:

       <column id="updateddate">
        <fieldname>updateddate</fieldname>
        <columnname>Modified</columnname>
                  <dateformat>MM/dd/yyyy hh:mm a z </dateformat>
        <width>auto</width>
        <formatter></formatter>
       </column>
  

       <column id="updateddate">
        <fieldname>updateddate</fieldname>
        <columnname>Modified</columnname>
                  <javadateformat>SHORT</javadateformat>
        <width>auto</width>
        <formatter></formatter>
       </column>
  

  (2) the next I want to achieve is to shoot only assets changed by the current of the connected user. I of course would investigate how to do it, but just thought that if someone here knows and can point me a direction and then he can save me some leg work.

  Well, if you have the old RecentlyModifiedAssetAction.jsp code, and then replace old code with the following:

  <%@page import="com.fatwire.assetapi.data.AssetData"%>

  <%@page import="com.fatwire.assetapi.data.AssetDataManager"%>

  < %@page="" import="com.fatwire.ui.util.GenericUtil">

  % >< %@page="" import="org.codehaus.jackson.map.ObjectMapper">

  % >< %@page="" import="com.fatwire.cs.ui.framework.UIException">

  % >< %@page="" import="java.util.*">

  %>< %="" @="" taglib="" préfixe="« cs »" uri="futuretense_cs/ftcs1_0.tld">

  % >< %@page="" import="com.fatwire.services.beans.search.SearchCriteria">

  % >< %@page="" import="com.fatwire.services.SearchService">

  % >< %@page="" import="com.fatwire.services.ServicesManager">

  % >< %@page="" import="com.fatwire.system.SessionFactory">

  % >< %@page="" import="com.fatwire.system.Session">

  % >< %@page="" import="com.fatwire.cs.core.search.data.ResultRow">

  % >< %@page="" import="com.fatwire.cs.core.search.data.IndexData">

  % >< %@page="" import="com.fatwire.assetapi.data.AssetId">

  % >< %@page="" import=" »">

  %>

  <>

  try {}

  / / This element uses the search service to find assets changed in last week to the site connected to.

  / / build search criteria

  SearchCriteria searchCriteria = new SearchCriteria();

  searchCriteria.setSiteId (GenericUtil.getLoggedInSite (ics));

  searchCriteria.setModifiedDateOption (SearchCriteria.DateOption.PASTWEEK);

  //Call search service for assets changed by a user connected from last week

  Session its = SessionFactory.getSession ();

  ServicesManager servicesManager = (ServicesManager) ses.getManager (ServicesManager.class.getName ());

  AssetDataManager mgr = (AssetDataManager) ses.getManager (AssetDataManager.class.getName ());

  SearchService searchService = servicesManager.getSearchService ();

  The list of search results from = searchService.search (searchCriteria,-1, null);

  / / generate the list of assets, it's a list of card

  List

  for (ResultRow r: search results)

  {

  Asset map = new HashMap();

  This map will have, the fields id, name, type and asset.

  String id = r.getIndexData("id").getData ();

  String type = r.getIndexData("AssetType").getData ();

  Refbien assetId = new AssetIdImpl (type, Long.parseLong (id));

  Check updated assets

  Data AssetData = mgr.readAttributes (assetId, Collections.singletonList ("updatedby"));

  String updatedby = data.getAttributeData ("updatedby") () () m:System.NET.SocketAddress.ToString .getData;

  If Active has been updated by the current user, add this asset to the map

  If (updatedby.equalsIgnoreCase (GenericUtil.getLoggedInUserName (ics))) {}

  asset.put ("id", assetId.toString ());

  Asset.put ("active", assetId);

  asset.put ("name", r.getIndexData("name").getData ());

  asset.put ("type", r.getIndexData("AssetType").getData ());

  Assets.Add (Asset);

  }

  }

  request.setAttribute ("assets", active);

  } catch (Exception e) {}

  e.printStackTrace ();

  UIException EUI = new UIException (e);

  request.setAttribute (UIException._UI_EXCEPTION_, UIE);

  throw the EUI;

  }%>

  With the above code, only those assets will be visible that have been updated by the current user for the current site. In addition, rather than use above search, you can built your own search and add the results within the scope of the request.

  Disadvantage of the use of this dashboard, is that if a user modifies & saves the assets, it is not automatically refreshes results as it does for the dashboard of the bookmarks. User will see updated Active changed by him or her that when that he clicks on the "Refresh" button or the connections again.

  Kind regards

  Guddu

• Where the health dashboard? How can I get it back?

  Where the health dashboard? How can I get it back?

  Press the tile of the activity.

  

  All sections of the dashboard are there now.

• I look at the TB dashboard seen comes from open TB. On the left, I see folders. The folder "sent", lets say, is higher than the "Outbox" folder I want to

  I look at the TB dashboard seen comes from open TB. On the left, I see folders. The folder "sent", lets say, is higher than the "Outbox" folder I want to put the "Outbox" folder above the folder "sent". How do I do this ever?

  I know that the addon will allow you to rearrange accounts, so you could put 'Local folders' over another e-mail account.
  It will also allow you to use files within an account.

  So if you have a Pop email account that uses the Global setting of the "Inbox", then it should allow you to move the position of the Outbox within this special account.

  But as the 'Outbox' is a 'Local folder' folder, I'm not sure that you can move it out of "Local folders" and reposition it on another account.

  The method for moving files is done via the menu bar.
  'Tools' > 'manually sort folders ".
  Select the folder and use "move up" or "Down" buttons.
  Then click on the button "refresh folderpane' to see the new sort order.

• in the menu toolbar customization, ALL the small icons in the last set (home, reload the page, stop downloadig page, etc.) are dishes on MISSING. What can I do?

  in the menu toolbar customization, ALL the small icons in the last set (home, reload the page, page download stop, etc.) are dishes on MISSING, and therefore I can not add the Firefox.What can I do?

  These buttons are not in the drop-down to 'Add' Palette, they are on the Navigation toolbar and must be "moved".
  The buttons Stop and reload should appear between the address bar and the search bar when customize is open, and the home button should appear to the right of the search bar.

• I can not print complete E-Mail due to the space occupied by the personal dashboard. The right side of the screen is taken by the dashboard. How can I remove the dashboard, that is to say, the column to the right of the screen?

  There is not enough room for the message between folders on the left and the (advertising) dashboard on the right.  Therefore, I often use the slide bar on the bottom of the screen to read the entire lines of the message.  For this reason, I can not print a full e-mail.

  How can I eliminate or reduce the dashboard?

  The ads are not visible under the eyes. Click the button in the toolbar of the message header in the reading pane:

  

  Le The full view button

  To print the message alone, click the three dots in the command bar and select print.

• Error - 'Auntentication with the server failed. Family Tree Maker software does not connect on the Web dashboard.

  Original title: Family Tree Maker does not connect on the Web dashboard.

  My Family Tree Maker 2009 does not connect to the Internet comes up with the message which is cannot authenticate the server, but it tells me that my version is up-to-date.  He has always worked so far? Comes with the following message if I try to do anything that involves the net.

  "Auntentication with the server failed.

  Hi HelenTL,

  You did changes to the computer before this problem?

  If you have any software security & firewall installed, disable them temporarily and check if the problem persists.

  
  Note: check to allow them back on the computer after you complete these steps.

  Hope the helps of information.
  Please post back and we do know.

• NVidea 620 GT graphics card has a setting for the user to customize its appearance?

  Hello

  May I know if the graphic card Nvidea has parameters for the user to customize the appearance of its release?

  What selection a user could change?

  Thank you

  Low

  Video cards have no 'settings', as the bios of the motherboard.   Control PANEL DISPLAYS the fact.

• I can't access the section of customize notification area. When I click the button nothing happens.

  I can't access the section of customize notification area.  When I click the button nothing happens.  It is also the same thing when I try to access it through the control panel.

  Hi Mpnieland,

  ·         Were you able to access the section Customize notification before?

  You can try the following steps and check if it solves the problem.

  Method 1: Try to boot in safe mode and check if you can access the section Customize.     You can check the link below.

  Start your computer in safe mode

  Method 2: Try to start the clean boot and check if help. See the article in the link below to perform a clean boot.

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  • Click Start, type msconfig.exe in the Start Search box and press ENTER.
  • If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  • On the general tab, click the Normal startup option, and then click OK.
  • When you are prompted to restart the computer, click on restart.

  Method 3: You can try to create a new user account and check if the problem is solved in it.

  To create a user account follow the steps below:

  • Open a user account by clicking on the Start button, select Control Panel, click user accounts and family safety, and then click user accounts.
  • Click Manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  • Click create a new account.
  • Type the name that you want to assign to the user account, click the account type, and then click create an account.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem is resolved in the new user account, you may have corrupted profile.

  Here is the link for troubleshooting a corrupted profile, you can follow the steps mentioned in the link.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope this information helps.

• by default the lack of customization

  Hello

  The dfltcustomzation model has disappeared on my ASA5510.  I have an anyconnect to work for a year so I have not looked at the portal without client page. But today I went there because we will publish our intranet from the VPN without customer portal. So now I can´t change the portal.

  How can I get that back?  I have 8.2 installed 3 with ASDM 6.3

  Yes. Deliver the 'export webvpn customization DfltCustomization stdout', copy the output and use the result in 'import webvpn customization DfltCustomization stdin' to use the default customization.

• Difference between different "trigger events" in the form of customization

  Hi Experts,

  Can you get it someone please let me know precisely the difference between the various 'trigger events' (better with a simple example) in the form of customization in Oracle Apps?

  A TIME NEW FORM INSTANCE
  A TIME NEWS BLOCK INSTANCE
  A TIMES-NEWS-RECORD-INSTANCE
  ONCE - NEW - ITEM - INSTANCE
  WHEN-VALIDATE-RECORD
  1 by SPECIAL45

  Mainly, I'm confuse when use A TIMES-NEWS-RECORD-INSTANCE, WHEN-VALIDATE-RECORD and A TIMES-NEWS-POINT-INSTANCE (it will be that it is very useful, if it is provided with a simple example to understand the difference between these 3)

  Thanks in advance,

  Bommi

  Hello

  Once - new - form - Instance: this trigger is called just after form is called. If you can do what you need to do before the start of the form. Make sure that this trigger is called only when the form is opened.

  WHEN-VALIDATE-RECORD: this trigger is called when the cursor is moved off the current record of the block specified to another record. This trigger can be very useful when trying to insert or update a record under certain costraints. If conditions are true to this trigger and form_trigger_failure will pass under the situation has no validation, recording is not saved. Thus, everything works fine.

  Once - new - Record - Instance: this trigger is called when the cursor passes on a new record in the specified block. This trigger can be useful when it is necessary to set the computed value of an element at the level of each record.

  A time new point Instance: this trigger is called when the subjects in the forms is entered.

  Hope this helps,

  Please mark responds 'Proper' or 'Useful', as appropriate, to facilitate solutions to the other participants in the community

• Helps the copy of a cloning of a dashboard and adding columns to new dashboard without affecting the previous dashboard

  Hi all

  I am new to OBIEE and need help with the cloning of a dashboard so I can add more columns to the new cloned dashboard. I just want some assurance how to do this, because I don't want to spoil the previous dashboard because users still use it. I have looked everywhere for advice and could not find anything on this. It doesn't seem to be as simple as copy and paste it into a different folder...

  Thank you in advance!

  Hello

  It doesn't seem to be as simple as copy and paste it in a different folder

  Why not?

  It's just a copy/paste

  (the dashboard of course, not only the page you want to change).

  Of course if you links/actions in your dashboard they still link to the original as OBIEE use full paths and relative paths, so these will require to be edited and modified to your new copy dashboard where you have.

• Show only the specific dashboard for a particular user

  Hi all

  I created a user and I have a dashboard that are assigned to him. When I connect with this user specific I want only his particular view dashboard, but I can see all the other dashboards as well. Is there a way to do this?

  Thanks in advance

  Concerning

  Ipog.

  Hello

  Go to the catalog-> shared folder-> Select perticular folder-> dashboard-> select the dashboard that you want to give permission. then provide the permision for this user/group/application role.

  Other dashboards, you give no access for this user/group/application role.

  Kind regards

  Sudi

• Get this error on the dashboard for the last 2 days: Please try again later we are working to improve your experience of the Enterprise Dashboard.

  When you try to run the company, I received this error for the last two days.  I have tried using another browser and ended in the same results.

  Please try again later

  We are working to improve your experience of the Enterprise Dashboard.

  Hello

  Your proof of cloud creative's 'VIP' instead of the company, so you would not normally manage your CC on the Enterprise Dashboard, but you had some Digital Marketing rights so that's why you have a dashboard.

  I am informed that currently some adjustments are made to your dashboard for Digital Marketing and that it should end soon.

  In the meantime your creative team of cloud management should be available through creative.adobe.com

• How can I use the DC Acrobat Customization Wizard to include an Adobe ID sign in?

  How can I use the DC Acrobat Customization Wizard to include an Adobe ID sign in?  I want my users to install through our deployment tools without having to enter an email address and password after launching the software for the first time.  Thank you.

  This feature has always existed. In the Customization Wizard screen, fill in all fields and don't forget to click on "Grant offline Exception." This avoids having users connect to activate the product because the product is activated by the administrator on behalf of all users.

  HTH,

  Ben