The OID connector and failed multiple values of attribute update task

Similar Questions

• SL410: lose the power connector (and unidentified metal part)

  Problem: connecting the power supply is unreliable - connector often need to be shaken to get the battery to charge. I bought a new DC-IN connector, but then as I disassemble the machine to get to the level of the connector a small piece of plastic (approximately rectangular, black on one side, brass on the other) fell. I finally got enough to remove the old connector and install a new one, but it just keeps slipping into the device. Am I right in suspecting that the piece of plastic that is brouilla could have the "rear wall" of the connector DC-IN housing, intended to stop the connector sliding back - and if so, how can I attach this piece? -a small drop of cement used for ABS plumbing parts? (Another part that fell is a small more or less oval silver color metal piece with a round brass threaded piece female at right angles with the silver part.) No idea where in the machine, he came.)

  I recently did a take on a SL510 which was loose.

  Used a blob of JB quick weld turned down. Make sure the metal plate

  which helps to hold a jack.

  The other part looks like a "screw mounting insert" probably from the top?

  Somewhere, you should have a screw that does not connect to something

  When it is inserted. Find where it goes and set the insert with JB or super glue may.

  and do not overtighten when replacing.

• Cloning of the OID connector

  Hello
  
  I am facing a problem of cloning OID connector. I describe in detail.
  What I expect: I want to use a connector available user CN = container users OID OID. "And the second connector (duplicated) available to a different node in OID).
  
  When I clone OID connector using oimOIDUser.xml, there are two options:
  
  1. I have replace after the entry of this file xml to my changed name because these are the things that are needed for a new connector if we just need a new connector from commissioning to cn = users of any other system of target (that we define our default container in Lookup.OID.Configuration):
  
  Name previous name of the object changed name
  COMPUTING resources Type OID Server IRS definition
  TI OID resource resource IRS
  Object OID user IRS resources
  OID, IRS group
  OID organization IRS organization unit
  OID, role of IRS
  Process forms (all attributes matching so) UD_OID_USR UD_IRS_USR
  UD_OID_ROLE OUD_ IRS _ROLE
  UD_OID_GR OUD_ IRS _GR
  UD_OID_GRP OUD_ IRS _GRP
  UD_OID_RL OUD_ IRS _RL
  UD_OID_OU OUD_ IRS _WHERE
  
  And when I try to start up using this connector IRS user, user's get placed in service at cn = Users in OID successfully.
  But I want available to the user from: testId = Apple1, or = Apple, or is APPLICATIONS USER, UO is OBJECTS of CONTEXT USER, dc = espappledev, dc = appledev, dc = Applecompany, dc = com, dc = nz
  
  So for this I tried to change:
  Lookup.OID.Configuration as Lookup.IRS.Configuration is not found, changing the value of KeyCode: ldapUserID & ldapUserDNPrefix to testId, ldapUserObjectClass top of page | Nobody | organizationalPerson. inetOrgPerson. orclUser | orclUserV2 | ObjAliasUser (my custom class with four required attributes: businessCategory, GlobalUid, testId and RoleId), default container cn = users in OU = Apple
  
  where under the specified name ou = APPLICATIONS USER, OU = OBJECTS of CONTEXT USER, dc = espappledev, dc = appledev, dc = Applecompany, dc = com, dc = nz in Root DN of IT Resource.
  
  User now not get configured in the OID and IRS thrown exception of naming users. I checked the DN of the root and it seems good. I think that Lookup.IRS.Configuration is not be created so that the cloning, so IRS user connector uses Lookup.OID.Configuration and when I make changes, provisoining user survey error.
  
  I tried cloning connector again, this time create Lookup.IRS.Configuration in addition to the items mentioned in the table above. Updated the Lookup.IRS.Configuration with my values. But it is still in error. Failed to create.
  
  2. the second option is totally replace the OID with TID (my name of connector) in all instances except where OID classes are mentioned as I have to use OIDProv.jar and OIDRecon.jar. This Provisioning business to the same cn = users throws exception:
  
  GetTargetAttributeMapping running
  GetProcessData running
  SHOULDUSEXLORG running
  Target class = java.lang.Boolean
  SHOULDUSESSL running
  Target class = java.lang.Boolean
  CREATEUSER running
  Target class = com.thortech.xl.integration.OID.tcUtilOIDUserOperations
  ERROR, June 23, 2010 11:15:35, 947, [XELLERATE. API], class/method: tcLookupOperationsBean/getLookupValuesFilteredData a few problems: the LookupCode 'null' does not exist.
  ERROR, June 23, 2010 11:15:35, 947, [XL_INTG. OID],====================================================
  ERROR, June 23, 2010 11:15:35, 947, [XL_INTG. OID], Exception in OID:tcUtilAttributeNameMap:getIntegrationAttributes (null)
  ERROR, June 23, 2010 11:15:35, 947, [XL_INTG. OID],====================================================
  
  ERROR, June 23, 2010 11:15:35, 948, [XELLERATE. API], class/method: tcLookupOperationsBean/getLookupValuesFilteredData a few problems: the LookupCode 'null' does not exist.
  ERROR, June 23, 2010 11:15:35, 948, [XL_INTG. OID],====================================================
  ERROR, June 23, 2010 11:15:35, 948, [XL_INTG. OID], com.thortech.XL.Integration.OID.util.tcUtilLDAPOperations: hashTableEnv(): null
  ERROR, June 23, 2010 11:15:35, 948, [XL_INTG. OID],====================================================
  
  ERROR, June 23, 2010 11:15:35, 948, [XL_INTG. OID],====================================================
  ERROR, June 23, 2010 11:15:35, 948, [XL_INTG. OID,] ERROR in com.thortech.xl.integration.OID.tcUtilOIDUserOperations:createUser(S,S,S,S,S) generic Exception Exception:
  ERROR, June 23, 2010 11:15:35, 948, [XL_INTG. OID],====================================================
  
  ERROR, June 23, 2010 11:15:35, 948, [XL_INTG. OID],====================================================
  ERROR, June 23, 2010 11:15:35, 948, [XL_INTG. OID],
  ERROR, June 23, 2010 11:15:35, 948, [XL_INTG. OID],====================================================
  
  ERROR, June 23, 2010 11:15:35, 949, [XL_INTG. OID],====================================================
  ERROR, June 23, 2010 11:15:35, 949, [XL_INTG. OID], com.thortech.XL.Integration.OID.util.tcUtilLDAPOperations: disconnectFromLDAP(): cannot close the LDAP context. The context has been created probably not, since it is null
  ERROR, June 23, 2010 11:15:35, 949, [XL_INTG. OID],====================================================
  
  ERROR, June 23, 2010 11:15:35, 949, [XL_INTG. OID],====================================================
  ERROR, June 23, 2010 11:15:35, 949, [XL_INTG. OID,] ERROR in com.thortech.xl.integration.OID.tcUtilOIDUserOperations:createUser(S,S,S,S,S) NoInitialContextExceptionError when connecting to the target
  ERROR, June 23, 2010 11:15:35, 949, [XL_INTG. OID],====================================================
  
  ERROR, June 23, 2010 11:15:35, 949, [XL_INTG. OID],====================================================
  ERROR, June 23, 2010 11:15:35, 949, [XL_INTG. OID], com.thortech.XL.Integration.OID.util.tcUtilLDAPOperations: cannot close the LDAP context. The context has been created probably not, since it is null
  ERROR, June 23, 2010 11:15:35, 949, [XL_INTG. OID],====================================================
  
  
  Ahh... too long, can you please help to solve this. Thank you.
  Nitin
  
  Published by: Nitin@S on June 23, 2010 12:49

  what I wanted was you have same context root for both the procurement process or dc = espappledev, dc = appledev, dc = Applecompany, dc = com, dc is nz

  For the first, you can specify cn = users (or nothing since cn = users is the default) in the pDataOrg in the process definition and
  for the second, you can specify UO = Apple, or = APPLICATIONS USER, or = OBJECTS of USER CONTEXT in the pDataOrg in the process definition.

  In this way, you are able to users in different containers of the same resource.

  Hope this helps,
  Sagar

• The research of Web applications with fields of the Data Source that contains multiple values

  I have a Web application with a field that allows multiple values to be recorded similar to the list box. I need limit the allowed values for a large, over the list of the values currently stored in another Web application as a data source. I can not apply to the type of Data Source field that allows only single value selection. I also need to be able to use the search form Web App to search for items containing 1 OR more of the values in this field (a type of list control field search functionality). Here's what I tried to field types:

  • Text (String) or text (multi-line) field type - By saving a list of values separated by commas (outputs in the same way this list box) to an entry of text or textarea, the search only logic search exact string (including commas) and does not analyze individual values.
  • Type of list (checkbox) field - it allows me to search for multiple values using the logic of the GOLD, but the web application stores only the values that have been entered as an option in the field settings real web app. I tried to use a checkbox with minimal or empty options list, hoping that some values I sent more separate by a comma value chain would be still stored, but because the values come from my Web App data source and not stored with the field options list, they were not saved.

  Someone at - he found a way to do it?

  My other question is how can I use a multivalued field to similar as described above but return results containing the elements with ALL the values of this field (AND logic).

  Can someone enlighten me to the inner workings of the search BC logic web app?

  You don't need to use the predefined boxes or types of entries. Everything you can represent as a string (such as the values separated by commas in your example) can be saved in any field of webapp. The types of fields defined in the Web application are only used to translate internal representation (all channels) to the various user-friendly interpretations (checkboxes, radios, dates, links, etc.)

• Update of the victory maintains and fail - over and over (error code: 80070005)

  original title: update victory maintains and fail - over and over

  Windows Vista telllng keeps me 'updates can be' an important update: Cumulative security update for Internet Explorer 8 for Windows Vista (KB2530548)
  has now been updated SEVERAL times - about 10.  It still fails. Then I'm prompted to restart to complete the update or "patch and stop", but this does never, either.  A download option is to install IE9.  I did, too, it seemed to have worked, but after I followed the direction "Reboot to use IE9" I have IE8, which still requires the update 'Important' mentioned above.
  How can I stop this endless loop?  I tried to download a new copy of IE8, but got an error because a more advanced version has been installed. Were so is IE9 which has been installed?  How can I find it?

  It seems that my problems with IE8 are more.
  As a result of the additional advice of Microsoft, I am delaying installation of IE9.
  Thanks to those who helped me.

• I had a lic 3. copy of windows 7, I used only 2 lic. I tried to activate the third today and failed.

  I had a lic 3. copy of windows 7, I used only 2 lic. I tried to activate the third today (06/25/13) and failed.

  Original title: activation error

  It is not uncommon for users who have a 'Family Pack' of Windows 7 to find that the 3rd install does not activate.  You should be OK, but you will have to activate by phone.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Attribute OID connector and modifyTimestamp

  Here's the scenario:
  Connection to a new OID
  RoleOccupant and modifyTimestamp attributes have been indexed
  When the timestamps of IT resources have been pointed, should be able to get a full recon.
  Run the Task Scheduler and it ends immediately.
  
  With ldap browser tried to attract users to:
  (& (objectClass = top)(objectClass=person) (objectClass = organizationalPerson)(objectClass=inetOrgPerson) (objectClass = USER_DETAILS) (modifyTimestamp > = 19000101010001Z))
  Have no user
  
  Use the same query less the modifyTimestamp part and all users are located
  (& (objectClass = top)(objectClass=person) (objectClass = organizationalPerson)(objectClass=inetOrgPerson) (objectClass = USER_DETAILS))
  
  Someone at - he encountered a similar situation. My guess is that it is a matter of config OID of some sort.

  You will need to index the modifyTimeStamp attribute. By default, it is not defined for indexing and research should throw an error on this topic in your newspaper.

  . / catalogue - connect - Add TRUE - modifytimestamp attribute

  -Kevin

• Impossible to uninstall the Roxio software and fails to say that I need to download the latest version of ISScript.msi

  I tried to uninstall the software of Rixio but it is not window pops up saying I have download the latest version of ISScript.msi. How can I install and its site please

  Original title: ISScript.msi

  Hello

  To resolve this problem, you need to determine the version number of the IsScript engine you need, download it and install it.

  (a) delete the folder C:\Program Files\Common Files\InstallShield\Driver from the machine.

  (b) make a right click on the Setup file that you are trying to install, and then select Properties.

  (c) the typical names for installation files are setup.exe, update.exe, installer.exe, etc..

  Examine the file Version field to determine the version number of the IsScript engine you need:
  If the file version number is 2.0 x or less, download the IKernel engine and install it on your computer.

  Download IkernelUpdate.exe

  Once downloaded, double-click it. This installs the IKernel engine, which should solve the problem.
  If the file version number starts with 7, download the following ISScript.msi file and install it on your computer.

  Download IsScript7x.zip
  Unzip the above using the WinZip utility.

  Double-click the IsScript.msi file. This installs the IsScript engine, which should solve the problem.
  If the file version number starts with 8, download the following IsScript8.msi file and install it on your computer.

  Download IsScript8.zip
  Unzip the above using the WinZip utility.

  Double-click the IsScript8.msi file. This installs the IsScript engine, which should solve the problem.
  If the file version number starts with 9, download the following IsScript9.msi file and install it on your computer.
  Download IsScript9.zip

  Unzip the above using the WinZip utility.
  Double-click the IsScript9.msi file. This installs the IsScript engine, which should solve the problem.

  WARNING:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• The Idle Application and Session Timeout value

  I use Apex 3.2.
  
  I found the following instructions to set the idle times and session of the applications.

  http://st-curriculum.oracle.com/obe/db/11g/r2/prod/appdev/apex/apexsec/apexsec09.htm#t5

  Once I had finished the instructions, I logged, as indicated, but when I log in I go directly to the page Timeout.
  
  Anyone who has used these instructions or can point me to a few more accomplished.
  
  Gus
  
  Published by: Gus C November 3, 2011 06:36

  Hello

  Close all open browsers.
  Open the browser and to connect to the generator of the Apex. Run your page. You land at session timeout page?

  Kind regards
  Jari

  http://dbswh.webhop.NET/dbswh/f?p=blog:Home:0

• table col name get the details of the table column and inserting of values depending on the data type of the column

  Hello

  I am train to write a procedure where I would spend the table as a parameter name and then the code would determine it is column names, and then he would insert records in each column depending on the data type. could someone help me with this.

  Thank you

  SM

  Hello

  Perhaps you need to dummy data just for the table.

  Here is my exercise

  create or replace
  procedure generate_rows(p_table_name varchar2, p_count number)
  is
    --
    function insert_statement(p_table_name varchar2) return clob
    is
      l_columns clob;
      l_expressions clob;
      l_sql clob default
        'insert into p_table_name (l_columns) select l_expressions from dual connect by level <= :p_count';
    begin
      select
        -- l_columns
        listagg(lower(column_name), ',') within group (order by column_id),
        -- l_expressions
        listagg(
          case
          when data_type = 'DATE'
            then  'sysdate'
          when data_type like 'TIMESTAMP%'
            then  'systimestamp'
          when data_type = 'NUMBER'
            then  replace('dbms_random.value(1,max)',
                    'max', nvl(data_precision - data_scale, data_length)
                  )
          when data_type = 'VARCHAR2'
            then  replace(q'|dbms_random.string('a',data_length)|',
                    'data_length', data_length
                  )
          else
                  'NULL'
          end, ',') within group (order by column_id)
      into
        l_columns,
        l_expressions
      from user_tab_columns
      where table_name = upper(p_table_name);
      --
      l_sql := replace(replace(replace(l_sql,
        'p_table_name', p_table_name),
        'l_columns', l_columns),
        'l_expressions', l_expressions);
      -- debug
      dbms_output.put_line(l_sql);
      --
      return l_sql;
    end;
  begin
    execute immediate insert_statement(p_table_name) using p_count;
  end;
  /
  
  -- test
  create table mytable(
    id number(4,0),
    txt varchar2(10),
    tstz timestamp with time zone,
    dt date,
    xml clob
  )
  ;
  set serveroutput on
  exec generate_rows('mytable', 10);
  select id, txt from mytable
  ;
  drop procedure generate_rows
  ;
  drop table mytable purge
  ;
  
  Procedure GENERATE_ROWS compiled
  Table MYTABLE created.
  PL/SQL procedure successfully completed.
  
  insert into mytable (id,txt,tstz,dt,xml) select dbms_random.value(1,4),dbms_random.string('a',10),systimestamp,sysdate,NULL from dual connect by level <= :p_count
          ID TXT
  ---------- ----------
           3 WnSbyiZRkC
           2 UddzkhktLf
           1 zwfWigHxUp
           2 VlUMPHHotN
           3 adGCKDeokj
           3 CKAHGfuHAY
           2 pqsHrVeHwF
           3 FypZMVshxs
           3 WtbsJPHMDC
           3 TlxYoKbuWp
  
  10 rows selected
  
  Procedure GENERATE_ROWS dropped.
  Table MYTABLE dropped.
  

  and here is the vision of Tom Kyte for the same https://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:2151576678914

  Edit: to improve my code, it must use p_count as bind as Tom.

• Process the SOAP response and use these values as variables

  Hello

  I have a SOAP request that I try to get out as variables, but whenever I run the workflow it is successful, but I'm not able to assign variables to output as parameters (but if I assign the parameter and do a system.log that it works but it does not work if I want to use the result in one variable to another part of the workflow)

  Here is the result:

  [14:31:30.437 2015-04-30] [I] processing response...

  [14:31:30.437 2015-04-30] [I] headers...

  [14:31:30.468 2015-04-30] [I] the settings...

  [14:31:30.475 2015-04-30] [I] the available settings:

  [14:31:30.476 2015-04-30] [I] + parameter name: "GetRequestStatusResult", value: "< response >

  < item >

  < ServiceRequestID > SR145208 < / ServiceRequestID >

  OS DEPLOYMENT < ServiceRequestStatus > < / ServiceRequestStatus >

  < ServiceRequestCreated > 20/04/2015-17:57:59 < / ServiceRequestCreated >

  < ServiceRequestCompleted > < / ServiceRequestCompleted >

  MA145212 < CurrentActivity > < / CurrentActivity >

  OS DEPLOYMENT < CurrentActivityTitle > < / CurrentActivityTitle >

  < ActivityStartUTC > < / ActivityStartUTC >

  < ActivityEndUTC > < / ActivityEndUTC >

  < DurationTotalSeconds > < / DurationTotalSeconds >

  < AverageDurationSeconds > < / AverageDurationSeconds >

  < SecondsOffAverage > < / SecondsOffAverage >

  < EstimatedCompletionUTC > < / EstimatedCompletionUTC >

  < / OutputParameters >

  < warning > < / warnings >

  < exceptions > < / Exceptions >

  < / response > '

  [14:31:30.478 2015-04-30] [I] + attribute of parameter name: '. (xmlns)', value: "http://SystemCenter.JPMChase.net/' "

  Here is my scriptable task:

  var getRequestStatusResult = outParameters.get ("GetRequestStatusResult");

  var content = getRequestStatusResult; the value of the GetRequestStatusResult parameter above XML text ("< response >... < / response > '")

  var doc = new XML (content); analyze the entire response

  serviceRequestNumber = doc. OutputParameters.ServiceRequestID;

  Service_RequestStatus = doc. OutputParameters.ServiceRequestStatus;

  serviceRequestCreated = doc. OutputParameters.ServiceRequestCreated;

  serviceRequestCompleted = doc. OutputParameters.ServiceRequestCompleted;

  currentActivity = doc. OutputParameters.CurrentActivity;

  currentActivityTitle = doc. OutputParameters.CurrentActivityTitle;

  activityStartUTC = doc. OutputParameters.ActivityStartUTC;

  activityEndUTC = doc. OutputParameters.ActivityEndUTC;

  durationTotalSeconds = doc. OutputParameters.DurationTotalSeconds;

  averageDurationSeconds = doc. OutputParameters.AverageDurationSeconds;

  secondsOffAverage = doc. OutputParameters.SecondsOffAverage;

  estimatedCompletionUTC = doc. OutputParameters.EstimatedCompletionUTC;

  not quite sure about this, but I think if you check out parts of an XML object, the result is also an XML object (and not a string).

  If you want to bind the values of the attributes of string in your workflow, you must explicitly convert the strings, using the method. toString().

  So (out of mind, not yet tested!), this should do the job:

  serviceRequestNumber = doc. OutputParameters.ServiceRequestID;

  serviceRequestNumber = serviceRequestNumber.toString ();

  Service_RequestStatus = doc. OutputParameters.ServiceRequestStatus;

  Service_RequestStatus = Service_RequestStatus.toString ();

  Using System.log automatically performs the conversion, but only internally to create the log message. So you see the output, even if the assignment to the workflow attribute does not work.

  Kind regards

  Joerg

• I want to stay on the 30 version and have never check for verified updates then why he update to 34?

  shows to be on the road to the beta. How do I get beta channel and just keep using version 30. I know there are security problems by using an old version, but am using the antivirus update. I want to only update or update when the antivirus has caught up. A lot of my kaspersky protection Add ons become disabled when the last updated version.

  Thank you for your Question.
  To return to an older version of Firefox, save your Firefox profile first, as a precaution, and then follow these steps:
  Download the version you want to http://download.cdn.mozilla.net/pub/firefox/releases/ or http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/ Note: If you are looking for an older version of a "final" of Firefox release, look for a download with no suffix letter (for example, 18.0.2 is the last final version before 19.0). Publish versions ending in esr (for example, Firefox 17 0.3esr) are Extended Support Release versions for organizations. Versions ending with b (e.g., 19.0b6) are beta versions, intended for users who are testing pre-release versions.
  Exit Firefox and then uninstall it. Be sure to remove the Firefox installation directory.
  Install the older version of Firefox. You can install Firefox at the same place in order to minimize the side effects. For example, the Windows registry or other installed programs can wait for Firefox to be in the default location (C:\Program Files\Mozilla Firefox or C:\Program Files (x 86) \Mozilla Firefox on 64-bit Windows).
  After you install the older version, disable the automatic software update feature of Firefox (if enabled).
  Reconfigure your firewall if you have one.
  If Firefox disable one of your modules, you might be able to replace it with a version that supports an older version of Firefox.
  If you encounter other problems, create a new Firefox profile and transfer your data to the new profile.

• Why the Add-ons Manager fail to Reconize that I updated my FF 3.6 to 6.0.2?

  I decided to update my FireFox after a long passage of not to use. Now I'm browsing add ons and whenever I try to install an add on I get an error telling me that I use an outdated version of FireFox and you want to update. I am running 6.0.2 and the Add-ons Manager tells me that I'm under 3.6. I even uninstalled and reinstalled and same problem.

  Discover this similar thread: some sites Web, including Mozilla, seems to think I use another version of Firefox that I use, how do I fix? Firefox Support Forum. Who help me?

• Using the index of multiple values

  Hi guys,.
  
  Trying to assess the benefits of the addition of index of multiple values, a quick question on the index of multiple values:
  
  Here's my content from the cache:
  
  Key (EmpID), value [employee (age int, double salary, Department of String)]
  (1, new employee (25, 35000.0, "Admin"));
  (2, new employee (22, 30000.0, "Admin"));
  (3, new employee (34, 40000.0, 'Communications'));
  (4, new employee (36, 41000.0, "Admin"));
  (5, new employee (36, 42000.0, "HR"));
  (6, new employee (29, 30000.0, "HR"));
  (7, new employee (51, 50000.0, "BackOffice"));
  (8, new employee (36, 35000.0, "HR"));
  (9, new employee (46, 45000.0, "Admin"));
  (10, new employee (48, 47000.0, "HR"));
  
  If I still want to find all employees in the 'Human resources' Department and whose salary is more than 35000.
  
  Eventually, I would like to do the following:
  ValueExtractor salExtractor = new PofExtractor (Integer.class, 2);
  ValueExtractor depExtractor = new PofExtractor (String.class, 3);
  cache.addIndex (salExtractor, false, null);
  cache.addIndex (depExtractor, false, null);
  
  EqualsFilter departmentFilter = new EqualsFilter (depExtractor, 'HR');
  GreaterFilter salFilter = new GreaterFilter (salExtractor, 35000);
  Filter allFilter = new AllFilter (new filter [] {departmentFilter, salFilter});
  Employees value = cache.entrySet (allFilter));
  
  For my usecase above how can I use the indexing of multiple values to the same query?
  ValueExtractor salExtractor = new PofExtractor (Integer.class, 2);
  ValueExtractor depExtractor = new PofExtractor (String.class, 3);
  MultiExtractor mExtractor is new MultiExtractor (new ValueExtractor [] {salExtractor, depExtractor});.
  cache.addIndex (mExtractor, false, null);
  
  But how can I use the extractor to create multivalued filter queries for employees in the Department of human resources with greater than 35000 salary? Any ideas are much appreciated.
  
  
  Thank you

  D wrote:
  Hi guys,.

  Trying to assess the benefits of the addition of index of multiple values, a quick question on the index of multiple values:

  Here's my content from the cache:

  Key (EmpID), value [employee (age int, double salary, Department of String)]
  (1, new employee (25, 35000.0, "Admin"));
  (2, new employee (22, 30000.0, "Admin"));
  (3, new employee (34, 40000.0, 'Communications'));
  (4, new employee (36, 41000.0, "Admin"));
  (5, new employee (36, 42000.0, "HR"));
  (6, new employee (29, 30000.0, "HR"));
  (7, new employee (51, 50000.0, "BackOffice"));
  (8, new employee (36, 35000.0, "HR"));
  (9, new employee (46, 45000.0, "Admin"));
  (10, new employee (48, 47000.0, "HR"));

  If I still want to find all employees in the 'Human resources' Department and whose salary is more than 35000.

  Eventually, I would like to do the following:
  ValueExtractor salExtractor = new PofExtractor (Integer.class, 2);
  ValueExtractor depExtractor = new PofExtractor (String.class, 3);
  cache.addIndex (salExtractor, false, null);
  cache.addIndex (depExtractor, false, null);

  EqualsFilter departmentFilter = new EqualsFilter (depExtractor, 'HR');
  GreaterFilter salFilter = new GreaterFilter (salExtractor, 35000);
  Filter allFilter = new AllFilter (new filter [] {departmentFilter, salFilter});
  Employees value = cache.entrySet (allFilter));

  For my usecase above how can I use the indexing of multiple values to the same query?
  ValueExtractor salExtractor = new PofExtractor (Integer.class, 2);
  ValueExtractor depExtractor = new PofExtractor (String.class, 3);
  MultiExtractor mExtractor is new MultiExtractor (new ValueExtractor [] {salExtractor, depExtractor});.
  cache.addIndex (mExtractor, false, null);

  But how can I use the extractor to create multivalued filter queries for employees in the Department of human resources with greater than 35000 salary? Any ideas are much appreciated.

  Thank you

  I remember, values multiple index refers to a different concept: a multivalued index means that you can retrieve a collection of values of similar role of an attribute on which you can do Contains, ContainsAll filtering, and ContainsAny.

  In this case to fully the lever consistency of querying capabilities, you would
  - either add a sorted index with a custom comparator that compares the tables containing a salary and a Department on a first salary so the base of the Department and add a filter custom which is able to take advantage of the index for the request for the salary and also able to filter on the element of the array of index service
  -Add two independent indices (a sorted index of wages and a unsorted for the Department), in which case you can leverage all existing (GreaterThanFilter, EqualsFilter and AndFilter) code

  Best regards

  Robert

• How oracle created by identification of the users and groups in the OID.

  Anyone know what LDAP search filters would give me only the OID users and groups created by the Oracle installation process itself?
  I want to write scripts to retrieve all users and groups that the developers have put in manually, as opposed to those created with installation or synchronized from the announcement.
  
  I tried things like ' (& (!)). (objectClass = orcladuser))) (& (objectclass = orcluserv2)(orclisenabled=ENABLED))) ' for users, but it's not quite restrictive. "
  
  Other ideas would be appreciated.
  
  Thank you!
  
  Published by: sherlihy on April 5, 2011 15:45

  There should be a date of creation. You could do a larger than the piece of timestamp in your query.

  -Kevin