iPhone 4S can not pass IOS to ios 5 9

Hello

I can't spend my ios to ios 5 9.

There are intermediate steps? It uploads but could not be installed. I tried mobile and the itunes restore, it does not work.

Thanks in advance.

You see error messages? What happens when you try to update the device?

Tags: iPhone

Similar Questions

  • new password can not pass password requiremensts has although uppercase, lowercase, # and 9 to 10 characters

    When I try to use Control Panel to change the password that I asked that the password does not pass needs even if the password contains ten characters long, upper and lower case, a # or a % and a number.  How can I get around this, please.

    If your computer is connected to a domain then you need to talk to your domain administrator.

    If it is not connected to a domain, then you must run the secpol.msc command and follow this path: security settings / account policies / password policy. Now change the settings according to your needs.

  • I downloaded a few movies with firefox, now they are stuck in a section of load down and they don't play and I can not pass them anywhere to burn to a disc that I can do?

    I downloaded a few movies and they went to download some file in fire fox and now I can not play them or move to another file were I can play or burn them. What can I do to fix this?

    Are the files still physically on the hard drive?

    You can check that in the window of download via the context menu Manager.

    If open the containing folder and then dimmed Open files have been removed and are no longer present in the original download location.

  • I can not install iOS 10 on my iPhone, how can I solve this problem?

    I'm unable to install iOS 10 on my iPhone, I deleted some apps and restarted my phone but it won't install. Anyone has any suggestions on how to fix it?

    You need for free up to up to 1.2 GB of space on your iPhone, just check below link how to proceed with iOS 10.

    Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

  • My iphone 5s will not install iOS 9.3 What should I do?

    I keep trying to install iOS 9.3, but he repeated to me that it cannot install it, its downloaded but it isn't and I don't understand what the problem is cause I tried to install it and I get the same message nonstop

    The update is currently not available for your phone, since Apple has released temporarily due to activation problems.

  • New switch and can not download IOS

    Hi all

    I just bought a new DS-C9124-K9 Cisco switch and there is no OS on it, when I go to download the operating system I get an error saying"

    Required service contract
     
    To download this software, you must have a valid contract associated with your Cisco.com profile.
      If you do not have a service contract you can get one through:

    • Your team if you have a purchase contract direct with Cisco Cisco
    • Your Cisco partner or reseller
      Once you have the service contract, you must associate your service agreement with your Cisco.com user ID with the Profile Manager

    "

    How can I fix this to get my ass expensive switch work XD

    AH, I forgot the problem. in any case you need cisco smartnet account or valid service contract are necessary for most items to download on the cisco Web site. If you don't you should contact your Cisco team account if you have a Direct purchasing agreement or contact a Cisco partner or reseller to purchase a service contract.

    Concerning

  • Can not pass 9.3 - get 'you are not connected to the Internet.

    I upgraded my iPhone 6 to 9.3 an hour ago, but now when trying to update my iPhone 5s I get something like "not possible to check the upgrade... «You are not connected to the Internet more» And when you search for updates on my iPad Air it says I already have the last 9.2.1. Apple has just removed 9.3?

    r http://www.IMore.com/Apple-Working-iOS-93-Fix-Older-iPhone-iPad?utm_medium=Slide & utm_campaign = navigation & utm_source = im

  • Can not pass my account!

    I have major issues trying to pass my email to a Microsoft account. My email is the @Hotmail.com end so I don't see why it does not work. When I try to do, it says there was an error and the error 0x800b0101 code. I don't know if this code can help someone help me or not, but I really need to get this figured out! If I can't get this done so I need to try to return my SurfacePro3 because I need to be able to access and do what I would like for the school on this thing. Thanks in advance!

    Hi Mariah,

    Thanks for posting the request in Microsoft Community Forums.

    We will analyze and identify the cause of the problem. This problem normally occurs when there is no incorrect configuration settings of the computer. The steps described here.

    Method 1: Troubleshoot Microsoft Account

    I suggest the first run the troubleshooter in Microsoft Account to check if the problem with the Microsoft account. Here is a link to download and run the Troubleshooter:

    http://go.Microsoft.com/fwlink/?LinkId=268424

    Method 2:

    Step 1: Check that the time zone defined in the settings of the clock is correct.

    a. click on Date and time shown in the taskbar and click then on change date and time.

    b. the Date and time tab, click on the hour and the date of change.

    c. set the date and time.

    d. then click change time zone , select your time zone and click ok.

    e. click the tab time Internet and then click change settings.

    f. place a check on synchronize with a time server Internet.

    g. in the Server option, select time.windows.com and click on update now.

    h. press on apply and ok and then restart the computer and check.


    Step 2:

    Try to make the reliable device and check the results.

    Trusted devices: FAQ

    http://Windows.Microsoft.com/en-in/Windows-8/what-is-trusted-device

    Also, try the steps mentioned by "Steven S" in the material provided. You can try the steps stipulating 'switch to a Local account and return to a Microsoft account'.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_cp-security/IM-having-trouble-with-my-Microsoft-account-how-do/b2d1277c-0be2-43B6-BDF3-c4f7954515be

    Hope this information helps. Response with status so that we can help you.

  • Can not pass an object of type to the void workflow.

    Hello

    I want to do a log of every action in an external file.

    In an action, I create an object of type FileWriter(). Opening the connection and then returning this object from main workflow.

    In the main workflow, we catch the output of the action in "logFile" variable that is declared as an attribute of type "Any".

    Also, main workflow has a workflow of void. I'm passing 'logFile' object for this void as an input workflow to collect newspapers. But I get an error saying:

    "TypeError: can't call method"writeLine"null".

    So how to send attributes to the void in the form of an object workflow?

    It works for variables of type object, not as a number, String, composite type etc.

    Kind regards

    Shubahda

    Reflection, I think now this behavior is probably normal/expected.

    FileWriter objects are objects that are not serializable/searchable script. I'll check with colleagues who are more familiar with the implementation of the transition from setting how such objects can be manipulated (maybe there's a way to wrap them up other than "Any"), but it will happen after the holidays.

    In the meantime, do you really need to pass objects FileWriter autour? Is it possible to have an action of logging, accepting as inputs the message and (possibly) means the name of the log file, which will open the log file, write the message and close the log file? And call this action in any workflow job/slot-workflow/scripts box where you want to save something. Yes, the log file will be opened/closed frequently (for each log message), but the drop in performance should not be so great.

  • When I go to my GroupOn I get "400 Bad Request" and that he can not pass, but if I use my Internet Explorer it passes through. Help?

    I use Groupon and I recently tried to buy one but when I hit 'BUY' get "400 Bad Request" error message. I called Groupon, and they made the purchase for me. However, when I went on Internet Explorer, which I use rarely like optonline does well with her, the purchase went through fine.

    Why I get this error message with Forefox and what I can do about it?

    Please update to version 24.0

    Please try to clear the cache and cookies:

    Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
    Note: This will be you temporarily disconnect all sites, you're connected to.
    To clear the cache and cookies to do the following:

    1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
    2. Under "Time range to clear", select "all".
    3. Now, click the arrow next to details to toggle the active details list.
    4. In the list of details, see the Cache and Cookies and uncheck everything.
    5. Now click the clear now button.

    More information can be found in article to clear your cache, history, and other personal information in Firefox .

    This solve your problems? Please report to us!

    Thank you.

  • Can not pass by the spot metering on my 60 d

    Not didn't have problems with my 60 d 1.5 year, until last week when all of a sudden I couldn't move on my spotmeter. The back screen says it's on the spot metering, but the counters of the camera in evaluation mode. I tried to remove and reinsert the battery, but no change. Any ideas? Thank you.

    Solved my problem! I went to the place of manual selection to the Center and kicks in the spot metering area. I'm a little worried that the glitch can be symptomatic of a problem that will be worse down the line. Has anyone else had this problem before?

  • Can not pass probably for my application when the call is answered

    BlackBerry Bold 9700, v5.0.0.862

    I develop a BlackBerry application and I want the phone to launch my application when an incoming call is * responding *. The code I must do this works intermittently, but it fails as often to succeed. Sometimes you will see my app temporarily for the current call (the screen with the duration of the call, etc.) to appear above it, or sometimes the current call is displayed without my app appearing at all.

    Here is the code I use:

    Welcome on the support forums.

    My guess would be that your application is reliable began, but the phone application is given to the foreground drops.

    You can avoid this by replacing the deactivate method in your application to the foreground application (but don't forget to add the control code, or you can never leave your app without leaving it).

    Notice that the code inside the earpiece of the phone is executed in the phone app. do not sleep or similar here!

    You should also check if your application is already running, and then inform via a global event.

  • Can not pass traffic from the VPN client to remote VPN site to site

    Hello

    I can't get the traffic flowing between my VPN clients and my remote site-to-site VPN, I did step by step in this link:

    http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml

    my firewall says that the package is abandoned by statefull inspection.

    But this should be the command "same-security-traffic..." "this problem must be resolved

    % ASA-6-302020: built ICMP incoming connections for faddr gaddr laddr (nworks) 10.48.100.2/0 10.48.100.2/0 10.45.231.163/1

    % ASA-6-302020: built outgoing ICMP connection for faddr gaddr laddr 10.45.231.163/1 10.45.231.163/1 10.48.100.2/0

    % ASA-6-302021: disassembly ICMP connection for faddr gaddr laddr (nworks) 10.48.100.2/0 10.48.100.2/0 10.45.231.163/1

    % ASA-6-302021: disassembly ICMP connection for faddr gaddr laddr 10.45.231.163/1 10.45.231.163/1 10.48.100.2/0

    Is it all what you might think that I'm missing?

    Best regards

    Erik

    Erik,

    Please check it out because no decaps means the ASA does not what it is the other side of the tunnel.

    If you send traffic and you will see the crypt increment... but nothing in return... 99% sure that the problem is at the other end.

    Federico.

  • Can not pass other newspapers in the form of windows 8

    I have recently installed Windows 8.  All of a sudden when my computer starts it shows my logo of microsoft account and account e-mail address and request my password - ok - I put my password and it says that it is not correct.  I know it's but I even went through the steps to try to reset the password, but when I go to the Microsoft Account page, it tells me that there is no trace of my account.  I tried to create a new account using the same email address, it wouldn't let me, insisting on a hotmail or live account.  I create a new account with a different email but nothing address is when I get to the login screen, it is always showing the e-mail that says that windows is not an account and ask, I guess, my old password it will not accept.  Help!

    Attempts to signing with windows live account gives incorrect password, even though I'm positive, it is true, I scoured the guests to have changed it, it always says this is a mistake - but I can sign in it elsewhere fine.

    I called Microsoft, a rather reluctant and rude woman who said I will receive a call back in the day, which was 5 hours ago.

  • Can not pass traffic with label of vmware virtual switch fabric 10 GB

    Hello

    I need to understand how to move traffic labeled VMware VST to these virtual Fabric switch. Blades IBM HS22 connecting internally to the virtual switch between ports 1 to 14. I use 2 external ports (17-18), one connects to the Netgear switch and another to the other switch to virtual fabric. Did the same on the other virtual fabric switch. My Synology rackstation is configured with LUN iscsi that connect to the Netgear switch and I would like to connect my HS 22 rackstation blades. My main concern is that I can't ping the IP of netgear on the same interface vlan. I can ping my Synology diskstation to the netgear which are in the same vlan. NETGEAR and BNT switches are connected by cables DAC SFP +.

    Untitled.png

    Even VLAN is also configured on Netgear switch. The default pvid is set as 1 on all interfaces, can I disable this? Do I need to use tagpvid-penetration on all interfaces.

    SH run

    Current configuration:
    !
    version "7.8.7.
    switch type "IBM Networking OS virtual fabric 10 Gb Switch Module for IBM BladeCenter"
    iscli-new
    !
    timezone system 295
    ! Europe/Denmark
    Advanced System
    !

    SNMP-name of the server "BNT01".
    !
    hostname "BNT01".
    !
    !
    enable access userbbi
    !
    INT1 interface port
    switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
    output
    !
    INT2 interface port
    switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
    output
    !
    INT3 interface port
    switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
    output
    !
    INT4 interface port
    switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
    output
    !
    INT5 interface port
    switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
    output
    !
    INT6 interface port
    switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
    output
    !
    INT7 interface port
    switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
    output
    !

    INT8 interface port
    switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
    output
    !
    INT9 interface port
    switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
    output
    !
    INT10 interface port
    switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
    output
    !
    INT11 interface port
    switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
    output
    !

    INT12 interface port
    switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
    output
    !
    INT13 interface port
    switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
    output
    !
    interface INT14 port
    switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
    output
    !
    EXT1 interface port
    switchport mode trunk
    switchport trunk allowed vlan 1, 16-50, 3998-4000
    output
    !
    EXT2 interface port
    switchport mode trunk
    switchport trunk allowed vlan 1, 16-50, 3998-4000
    output
    !

    !
    VLAN 1
    the name "Default".
    !
    VLAN 16
    name "VLAN16".
    !
    VLAN 17
    name "VLAN17".
    !
    VLAN 18
    name "VLAN18".
    !
    VLAN 19
    name "VLAN19".
    !
    VLAN 20
    name "VLAN20.
    !

    .

    .

    .

    .

    .

    .

    ..

    VLAN 46
    name "VLAN46".
    !
    VLAN 47
    name "VLAN47".
    !
    VLAN 48
    name "VLAN48".
    !
    VLAN 49
    name "VLAN49".
    !
    VLAN 50
    name "VLAN50".
    !
    VLAN 3998
    name "iscsi".
    !
    VLAN 3999
    name "vmotion".
    !
    VLAN 4000
    name "mgmt".
    !
    !
    !
    spanning tree mst configuration
    lethosting-name "region1".
    revision 2
    output
    !
    spanning tree mst mode
    !
    spanning tree mst configuration
    example of 1 vlan 16-50
    instance 2 vlan 3997,4000
    example 3 vlan 3998-3999
    output

    The configuration is for Teddy. I donno what I'm missing here? Any ideas would be very appreciated.

    Yes. Finally managed to do work. Tagged traffic now connects blades with ESXI 5.5 U2 to the Synology rackstation.

    It was the same thing we had. ESXi 6.0 is not supported by this adapter emulex. Also ESXi 5.5 does not I think with the iSCSI driver. So I have updated drivers using esxcli.

    VMware

    Updated network driver

    / tmp # software esxcli vib install v - /tmp/elxnet-10.0.575.9-1OEM.550.0.0.1331820.x86_64.vib
    Result of the installation
    Message: The update completed successfully, but the system must be restarted for the changes to be effective.
    Restart required: true
    VIBs installed: Emulex_bootbank_elxnet_10.0.575.9 - 1OEM.550.0.0.1331820
    VIBs removed: VMware_bootbank_elxnet_10.0.100.0v - 1vmw.550.0.0.1331820
    VIBs ignored:

    ISCSI driver update

    / tmp # software esxcli vib install v - /tmp/scsi-be2iscsi-4.6.261.0-1OEM.550.0.0.1198611.x86_64.vib
    Result of the installation
    Message: The update completed successfully, but the system must be restarted for the changes to be effective.
    Restart required: true
    VIBs installed: Emulex_bootbank_scsi - be2iscsi_4.6.261.0 - 1OEM.550.0.0.1198611
    VIBs deleted:
    VIBs ignored:
    / tmp # software esxcli vib install v - /tmp/ima-be2iscsi-4.6.261.0-1OEM.550.0.0.1198611.i386.vib
    Result of the installation
    Message: The update completed successfully, but the system must be restarted for the changes to be effective.
    Restart required: true
    VIBs installed: Emulex_bootbank_ima - be2iscsi_4.6.261.0 - 1OEM.550.0.0.1198611
    VIBs deleted:
    VIBs ignored:

    esxcli system set to true EI maintenanceMode
    esxcli system shutdown reboot - r = driverupdate d = 10

    After that, I created iSCSI vmkernel ports with the grouping. Ping has started working and now I can connect to the storage

Maybe you are looking for