The only problem I have now is with the video game streaming. In my view, FF 9 was released. I'll wait to read comments before the upgrade as I am leary to make things worse.
I have no other details.
It's really hard to say what could be the problem. It may even be something as a change to your internet connection quality (not something done by you). 9 FX is available if you want to try it - mozilla.org/firefox
Tags: Firefox
Similar Questions
-
Problem with playing video games, DVD and CD audio with windows Vista.
I had a problem to read these types of discs with my hard drive. It does not recognize that there is a disc at all. This ONLY happens with new discs I get, for example by trying to install a new video game or download a new album that I just got. If I want to play a previously installed game I put game disk in and it works perfectly fine. This only happens with new games that I have not yet installed. E.g. I want to play starcraft, previously installed. I put the cd in starcraft and the game appears as usual. But if I want to install starcraft II nothing happens when I put StarCraft II in the disk drive, even if I go to my computer and double click on your drive, it just opens the CD door and asks to put a disc in when we're already here.
I tried MR. Fix and it recognizes that there is a problem but is unable to repair. I tried to uninstall the disk driver and not the fixed not restart, but who either.
Hello
You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burn
and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.A CD/DVD cleaner might help.
-----------------------------------
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlRob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Problem I have TO solve with the query: PREV calculation to the current record
Hi all
My version of db:
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
I have the problem to solve with a request (MUST BE a SELECT statement), but I do not understand how... I tried with the analytical function but... not just:
I have this table:
rownum KEY1 KEY2 A3 PERC IMP 1 A123 RISCP 01/01/2014 10 100 2 A123 RISCP 02/01/2014 11 100 3 A123 RISCP 03/01/2014 15 100 Application of expected result:
RESULTS KEY1 KEY2 A3 PERC IMP 90 A123 RISCP 01/01/2014 10 100 80.1 A123 RISCP 02/01/2014 11 100 68.085 A123 RISCP 03/01/2014 15 100 Starts recording with rownum 1 (the lower date with the same KEY) I do: imp - (100 imp * perc), where imp = 100 and PERC = 10, so the first result of the calculation is: 90
Now I have to go to record 2, so I do 90 - 11%: imp - (100 imp * perc), where imp = 90 and PERC = 11, results is 80.1
Now I have to go to the 3d recording, so I 80.1 - 15%: imp - (100 imp * perc), where imp = 80.1 and perc = 15, results is 68 085
So I have to use the previous to the current PERC.
I'm sure it's possible through a combination of funcion analytical!
Thanks to anyone who can help me!
with
data in the form of
(select 1 rn "A123" key1, to_date('01-JAN-2014','DD-MON-YYYY') dat, 10 perc, 100 imp union double all the)
Select option 2, 'A123', to_date (February 1, 2014 "," MON-DD-YYYY ""), 11, 100 of all the double union
Select 3, 'A123', to_date (March 1, 2014 "," MON-DD-YYYY ""), 15, 100 double
),
Solver (RN, Key1, DAT, PERC, IMP, result) as
(select rn, key1, dat, perc, imp, imp * (1 - 0.01 * perc))
from the data
where rn = 1
Union of all the
Select d.rn, d.key1, d.dat, d.perc, d.imp, s.result * (1 - 0.01 * d.perc)
s Solver,
data d
where d.rn = s.rn + 1
)
Select *.
the Solver
RN KEY1 DAT PERC IMP RESULT 1 A123 01/01/2014 10 100 90 2 A123 01/02/2014 11 100 80.1 3 A123 01/03/2014 15 100 68.085 Concerning
Etbin
-
Must not exceed the flashing orange light. have tried three ethernet cables to the Fios router. All thoughts
What extreme version do you have?
Test the cables connecting the airport to your Mac with them and see if the ethernet works on Mac. Green connectivity light should go... If it fails, then the AE died.
Please do a factory reset, then try again.
Sometimes Mac airport utility works well... If you have the preference or iphone ipad, download and use iOS version airport utility and try it for configuration... It is much less awkward.
-
I read in the forums that Creative Cloud PhotoShop CC has problems with MAC El Capitan?
Please see Compatibility FAQ for details.
-
Hello
In Event Viewer, I see a lot of mistakes like:
Source: The customers DNS events
There was an error trying to read the local hosts file.
I read that threat indicating to rename the hosts for "hosts" file
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/system-log-shows-repeating-error-code-3221225485/3700e855-ded4-4F12-960f-1577f6132c04
HOWEVER, the name of the file in my computer appears as it should
C:/Windows/System32/drivers/etc / "hosts".
and the content of the file is as it is supposed to be according to: http://support.microsoft.com/kb/972034
What should I do to fix this error?
P.S. I suspect my computer is compromised. Last weekend, Security Essentials has reported a malicious file backdoor and it has been deleted, but I have a weird behavior of the computer
Thank you
Veronica
Try to re-create the hosts file.
Open Notepad as administrator (click right on the Notepad icon or shortcut and click Run as admin) and type the following information in it:
127.0.0.1 localhost
: 1 localhost
The '1' in the '127.0.0.1' must be in the first column of the line and there must be at least one space between "127.0.0.1" and "localhost". In the second line, there must be at least one space between ": 1" and "localhost".
Save the file with name "hosts" in the C:\windows\system32\drivers\etc folder.
Source: http://www.sevenforums.com/system-security/130518-hosts-file-missing-should-i-worry.html
You seem to have a hard drive problem. Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.
-
Problem of collecting usage data with advanced BES application on the workspace
Hi I have a bb10 application that collect usage data. It work propaply when it is on the store and my personal space of peripheral company.
I used to get the use of the data as the sum of
msm0, msm1, msm2, msm3, msm4, msm5, msm6, msm7 interfaces. And it was good.
Now I push through BES application on my workspace. The problem is that I do not have access to these interface more.
The interface only 3 I have now are lo0, lo2 and pflog
LO2 give me the use of the data that consumed by the application running in the workspace, but it only gives me something on the use of the data consumed in personal space.
How I verefied is playing a video in the workspace youyube, he loged in the use of the data. then I played the same video in personal space he connect anything.
Any help please.
I don't think that you can solve with a single application, as work and private space are separated.
-
Hello world...
I just upgrade my ESX 3.5 servers to vSphere 4.1. All this work is very well with the upgrade right now.
After that, I tried to mise a niveau of VMware Tools and hardware of VM for my virtual machine and the problems started.
I tried with two different VM (the two Windows 2003) and the problem appears for the two VM.
I don't want to test another VM of the different operating system now, I'm afraid to go too far with update of Pentecost the problem I have now.
I tried two VM to be sure that the problem is not only on a virtual machine.
First of all, the mouse.
My mouse has jerky movement. The button works, but sometimes I have to click several times to select what I want.
I tried to uninstall the mouse in Device Manager and reinstall, but not really Pentecost improvement which (buttons works better, but... not so sure).
Second problem.
After you restart the server after VMmware tools and hardware virtual machine, the network link not working anymore.
When I go to my network card configuration, IP settings are reset in DHCP mode.
If I go again all my IP settings, Windows says:
The IP address is hidden from the network and Dial-up connections
folder because it is not physically in the computer or is a riser
It does not work. If the same address is assigned to both adapters and
they become active, only one of them will use this address. This may result
in the incorrect system configuration. You want to enter a different IP address
address of this adapter in the list of IP addresses for this card in the list
Advanced IP address in the dialog box
If I answer Yes to this, I have to enter a new IP address, and of course, this is not what I want to do.
If I don't answer, the network working again.
I think it is a strange message but the work of the vSphere maybe network now.
Anyone have any idea why my work network and mouse as this upgrade after.
All other VM that is not upgraded so far works great.
Thanks in advance...
(1) make sure that your hardware acceleration is safe enough. I got the upgrade down my hardware acceleration several times already.
(2) sounds like the new drivers for your NIC cards took over and VMware is basically a new card NETWORK for you. Follow these steps to disable it:
(a) open a command prompt
(b) type (without quotes): 'set devmgr_show_nonpresent_devices = 1' and press ENTER.
(c) type (without the quotes): "start devmgmt.msc"
-
original title:
Hi all
I desperately need help. I recently bought a touchscreen "All-in-one" PC "Packard Bell OneTwo M.
I plugged my Xbox via HDMI port to the rear and the visuals are great, the only problem I have is volume transmitted through the built-in speakers is very strong, I used the keys function keyboard to try to change the volume but no succession, the remote that I have provided with the PC has also volume buttons but them seems to change the volume of my digital TV which is also integrated in.
Any help is appreciated
ConcerningHello
You can adjust the volume on your computer by following the steps in the link below:
Adjust the sound level on your computer
http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computerIt will be useful.
-
World of Warcraft on Tecra M5 with Nvidia video problem
Hello
I own a laptop very well supported - Toshiba Tecra M5 with the following specifications
Processor: Intel Centrino Duo - T2600 @ 2.16 GHz and 2.16 GHz
RAM: 4 GB
Video: Nvidia Quadro NVS 110M
OS: Windows Vista Ultimate 32-bit (on the highest performance with all the eye candy settings disabled)The phone plays very well, but when I try to play world of Warcraft I encounter problems in the screenshots below
http://www.exeedstudios.com/temporary/WoWScrnShot_051809_075336.jpg
http://www.exeedstudios.com/temporary/WoWScrnShot_051809_075634.jpgI tried playing with the drivers on the Toshiba site (dating back to 2007) and I also tried the latest version of the driver directly from nVidia but no change in performance
Running the game in opengl mode makes things worse.
Sometimes, glitches video will change the above to the followinghttp://www.exeedstudios.com/temporary/WoWScrnShot_051809_090648.jpg
In the world of Warcraft Support Forum I was told to contact the manufacturer of the video card may be defective.
Thanks in advance for your help.
Hello!
It seems that your graphics card is broken...
You have this problem on other games also or only with World of Warcraft?But it could also be an overheating problem. Have you tried to clean the laptop using a jet of compressed air? This could blow out the dust from the cooling fans.
In the worst cases, you should contact an ASP. Technicians can check your laptop and share the graphics card if it of necessary.
Good bye
-
Why can I only run firefox as administrator - associated with zonealarm
This has happened frequently usually after an upgrade, it is causing security problems I have now a virus that took advantage of this situation.
This seems to be a consistent failure through the lifecycle of firefox, I will not work as an administrator and if it cannot be fixed moves to another browser
Hello
Thanks cor - el for your answer, I didn't check out safe, but it seems to be a problem with zonealarm and virtualization of the browser I fixed it by that.
1. switch off browser virtualisation in zonealarm. 2. Load firefox. 3. Switch on browser virtualisation in zonealarm 4. Unload firefox. 5. Load firefox.
and it now works OK, I don't think it is related to virtual data that I had previously turned off a few times before.
Don't even think to ask the question.
Concerning
Neil
-
Windows Media Player will not play a DVD, I have a series with yellow mark Driver
I got it, (cannot display the web page) twice, once when I updated one of the display, drivers, (I didn't roll back to the old.. 2nd time, I found that (work offline) to int, Explorer, had checked sort.) u can tell me what that non plug and play, pilot of the series might be for? I see the same driver identical series with yellow mark, it does not prevent me to get online, is the only problem I have, Windows Media Player, do not play a DVD!
1. check the status of the device in Device Manager. Follow the steps for the same thing:
a. click on start
b. click Run, in the Run dialog box type devmgmt.msc
c. in the Device Manager window, locate the CD/DVD drive and expand the drive, double-click the sub element to check if an error message or error code is listed.
2 install the updated firmware for the drive and check if it helps. Link:
-
Every time I play a video game on my computer crashes. How to solve this problem or better to diagnose the problem? Sometimes when I play a video game in the steam.
Windows 7
64 bitHP e9300zProcessor: AMD Athlon II processor 4 620 X 2.60 GhzRAM: 4 GBGraphics card: NVIDIA GeForce GT 220It does not give me an error message simply stops and restarts auto.When it reboots it just tells me that Windows has stopped unexpectedly.First - check that you have the latest drivers for your motherboard chipset, your video device, your audio device and your network devices. The first place to look for those who are on the Web site for your computer model & specific brand:
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4148392&LC=en&cc=us&DLC=en&lang=en&cc=us
When you select your operating system (Windows 7 64-bit) I see that HP ony supplies those who they provided with the system originally. It's practically worthless.
Yes, where to from here? I would say that you should at least install the latest video card driver - as more modern games can use those strongly...
http://www.nvidia.com/object/Win7-WinVista-64bit-301.42-WHQL-driver.html
Download and install it. If possible, you still have the original driver installed - this is more recent than most 30 months.
It's an AMD 785 G chipset card mother configuration, if their site is correct. Looks like you can download and install latest drivers from AMD for this also:
http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx
I'd say it's a good start.
What else? It could very well be a heat problem. Since it is a desktop - I suggest she get everything, buy some canned air for cleaning electronices and opening of this case and blow off any dust. It can be quite the accumulation. After blowing out, make sure that all the components that look like they 'plug' firmly/well connected. Carefully. Then, put the cover on and connect.
Make sure that there is enough air around the case - put a fan in front of him if you have to.
-
Hello
After the upgrade to Windows 8.1 the OEM of Windows 8 my machine on the ground to stop. I looked at some common problems, but there are just to many to test when my machine is so slow. Right click takes about 10 minutes to display the menu to give you an idea.
To make things worse, I tried to do a reset of the HP recovery but it kept also, failing a lesson well learned to create additional recovery CD!
In any case, I have a copy of Windows 7 but HP does not support this OS on this system, I searched this forum but can't find anything particular about my model number and drivers Windows 7.
A point in the right direction for Windows 7 drivers for this system would be a great help or advice for me to use the machine on the 8.1
See you soon
Hello:
Your model is pretty easy to install W7 x 64 on.
If you let me know which model of laptop wireless card is came with, I'll post the link to this driver too.
I don't think the drivers wireless since the page g7z-2100 driver will work.
Here are links to most of the drivers you need:
First of all, download and install the AMD chipset driver and restart. To install the smbus and usb3 controllers.
http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64
You can then use all the other W7 x 64 drivers and software the g7z-2100 on the link below (except maybe the wireless).
DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK
-
Satellite A110-195: black & white photo on TV with s-video connection
When I connect to my laptop to TV with S-video cable, I get black white picture on TV. I tried to solve the problem with little things, but it is still black & white photo on TV. I have tried to change all settings to pal/ntsc under graphics properties, change the S-video cables, install a new graphics driver...
Beside that I have desktop computer with S-video out and it works with the same cables and even TV (it's color).
I noticed that this problem is very often, not just with my laptop with many many others...Can someone tell me what I should try to do?
As far as I know the S-video port on television must be enabled. If you have the same problem with most of the other laptops it's obviously this problem is TV and not PC.
Check the TV settings and make sure that the correct port is enabled.
Maybe you are looking for
-
10.1.2 iMovie will not share video
I imported my MP4 videos in iMovie 10.1.2 (6, 15 minute segments), put them in a timeline. This is for me the beachball if I try to play the video captures. So I completed the timeline and tried to share the video. It gives me error 60, sharing on Vi
-
When I tried to open firefox it always opens the what's NEW page.
-
How to change the login Windows to Toshiba screen?
Can you help me? How can download stuck for the logon windows change... I want to change Toshiba opening screen of windows welcome screen...
-
For these last days, Chrome has been crashing, around 20 to 30 times a day. I sent the accident report to Google and it seems that it is a Mac problem. This was the response from Google: Thanks for the report. We know about it and believe it to be ca
-
Laptop of HP 2000: Enter administrator or power on password
Please help me remove the login screen 'enter administrator or power on password'. The code I got is 64124161 What should I do next?