The OPM with Flex Integratio

Similar Questions

• Tips for network administrators avoid the error "built-in tomcat web server was able to start after 30 seconds" on the building with screens in OPM?

  Multi developers geographically - dispersed control source of TFS, devs mapping local drives to the citizens.

  Some developers in certain regions always get tomcat timeouts during construction with screens in OPM.

  We have no right to admin on disks (they are administered by the Agency) - but I was wondering if it is something that everyone has met before and have a solution and or a tip on how to resolve the issue (if I can help network administrators)?

  Thank you very much...

  If you use Oracle Policy Modeling version10.2 or later, you can change the "boot tomcat timeout" If you're handy with a text editor.  You need the OPM the file "registry.xml" which should be:

  c:\Users\\AppData\Roaming\Oracle Corporation\Oracle policy Modeling\registry.xml

  or

  c:\Documents and settings\\application data\Oracle Corporation\Oracle policy Modeling\registry.xml

  Look inside it to

  and Add (or change) the entry that says:

  by default

  Change the word 'default' for the number of seconds to wait for the embedded server Tomcat starts.  I suggest try to 90 seconds and increase it if necessary.

  Moreover, the best public reference I can find for this function is that the "features and benefits" to release documentation for 10.2 (see page 29):

  • http://www.Oracle.com/technetwork/apps-tech/policy-automation/learnmore/OPA-10-2-features-and-benefits-284702.PDF

  Moreover, when the project is on a local disk, my machine usually takes less than 2 seconds to start tomcat.  Suffice it to say!

• What is the technology used for the integration of java with Flex application?

  How we integrate java into a Flex application or how to build flex applications that use Java as a backend?

  BlazeDs is currently used in businesses to serve the above purpose?

  Or is there a better technology that is used in businesses for the integration of Java with Flex application?

  What is the latest version of BlazeDs?

  Also, please give me a few important article links which shows a sample application in Flex using Java development as a backend.

  Thank you in advance.

  BlazeDS is the way to go. Just google BlazeDS and you will find many examples of link Java to Flex via Remoting and BlazeDS.

• How to use the funds application Flex with java

  Hello

  I've seen a lot of tutorials on using web application with java flex but you will not see even a tutorial for the application Office Flex with java. If anyone have pls send the link.

  is it possible to create java application and desktop application without using application server?

  Thank you.

  Hello

  Please see the link below.

  http://forums.Adobe.com/thread/601342?decorator=print&displayFullThread=true

  It could anser your query.

  Anser another is "Merapi project" - This allows you to connect to the local application of Java of the AIR application.

• How to read the video stream directly with Flex?

  I'm trying to get Flex Builder 3 to play a video stream with Flash Media live
  Server and Flash Media Live Encoder.

  I am able to stream pre-recrorded (VSD) files in flex FLV go the Flash media server.

  I am able to stream live using Flash/FMS/Flas Live Media Encoder, but do not
  with Flex.

  This stream of video on demand flvs, but not live streams prerecorded code:

  If I change the source to 'rtmp://localhost/live/livesream.flv, I get nothing.

  What I am doing wrong?

  <? XML version = "1.0"? >
  <!--controls\videodisplay\VideoDisplayFMS.mxml-->
  "< mx:Application xmlns:mx ="http://www.adobe.com/2006/mxml">".

  < mx:HBox >
  < mx:Label text = "RTMP FMS 2.0" / >
  < mx:VideoDisplay
  autoBandWidthDetection = "false".
  source = "rtmp://localhost/vod/Legend.flv" / >
  < / mx:HBox >
  < / mx:Application >

  Oh and sorry for the double post. I didn't know there was a separate instance of the FMS.

  I use the video display component, but there is no "on-line" property. Try what setting to true. If it still does not work, try to remove the name of the stream of the .flv extension.

• Cannot find the 'endpoint' with 'RemoteObject' property in Flex 3

  Hi all
  I am uttering the 'RemoteObject' class object inside the class action script. I'm here
  unabe to find ownership of "endpoint" with the remote object in Flex 3.0.I am currently using
  the SDK 3.2.Earlier I used this property earlier in Flex 2.0.Can whole body sugget me what
  is the replacement in flex 3 for this, or how to get this property.
  
  In Flex 2.0
  ===========
  var rm:RemoteObject = new RemoteObject;
  RM.source = "ServerSideClassName";
  RM.destination = 'amfphp ';
  RM. EndPoint =http://Ip or server PC/ProjectName/amfphp/gateway.php;
  In Flex 3 (sdk 3.2)
  ==================
  var rm:RemoteObject = new RemoteObject;
  RM.source = "ServerSideClassName";
  RM.destination = 'amfphp ';
  Cannot find rm.endpoint here.
  Thnx in advance
  Mayeul Singh Bartwal

  Hello Arnaud

  I m not sure but I think you used the remote object from the package of «mx.rpc.remoting.RemoteObject» class

  instead of "mx.rpc.remoting.mxml.RemoteObject. That's why is does not show property as the 'end point '.

  To verify remote call from the package «mx.rpc.remoting.mxml.RemoteObject» with the object

  May helps you

  Thank you

  Virat Patel

• Connection problem with the database, the closure of Flex Builder

  Hello

  I developed a web page that connects to a database, reads data and it shows on the screen. I use HTTPService to connect to a php server that supports MySQL data. Everything is OK when I run the Flex Builder web page, but when I run the page doing double click on the file released .html the connection fails and the program generates this error:

  [RPC Fault faultString = "" error #2028: file:///Q:/2009-08-05-1330FinalFrontEnd/bin-release/FrontEnd.swf SWF file with Local file system cannot access Internet URL http://localhost/Test2/Test2.php. "faultCode ="InvokeFailed"faultDetail ="null""]
  to mx.rpc::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal: call ()
  at mx.rpc.http.mxml::HTTPService/ http://www.adobe.com/2006/flex/mx/internal: call ()
  at mx.rpc.http::HTTPService/send()
  at mx.rpc.http.mxml::HTTPService/send()
  in FrontEnd / submitLabelsQuery)
  in FrontEnd / updateLabels)
  in FrontEnd / ___FrontEnd_SetEventHandler5_handler)

  Does anyone know how can I use the web page without using Flex Builder?

  More information:

  I use Flex Builder 3 to the development of the web page and WampServer 2.0 for the connection with the database.

  Thank you

  Onditz

  Hi Onditz,

  Previously, I also faced the same problem when working with Php as the Backend, the problem is that Flex does not call your PHP page

  It is the way I solved it to export your Flex Project at Flex Release Build.

  Right click on the export of project---> Flex project---> Release Build---> copy all the files on your server where all of your PHP files are and then call the application from the browser

  http://localhost/test2/sample.html. »

• Problem with the upgrade to Flex 3

  I've recently updated for Flex 3 and an app I wrote with the beta 3 version, which worked very well does not work with the release candidate version. Most of the stuff has been cosmetic which I expected but a major problem is that the TileList info is not displayed.
  
  Code
  
  < mx:HTTPService id = "tempXML" resultFormat = "e4x" result = "onResult (event)" url =" http://rbdev.mysite.net/info_wrapper.php?url=https: / / {customer.text}.mysite.net/interface. php? action = showopen & amp; operation = showassets & amp; format = xml & amp; opstatus = crit & amp; name of user = {username.text} & amp; password = {password.text} ' / >}"
  
  < mx:TileList dataProvider = labelField "{_xlcMyListData}" = "fleet" left = "35" right = "15".
  width = "350" backgroundColor = "#000000" color = "#ff0000" fontSize = "27" borderColor = "#000000" columnWidth = rowHeight "315" = "50" themeColor = "#808080" fontWeight = "bold" allowMultipleSelection = "true" id = "TileList1" height = "0" y = "202" x = "178" / >
  
  < mx:Script >
  <! [CDATA]
  Setting the display of the TileList component
  Import mx.collections.XMLListCollection;
  
  [Bindable]
  private var _xlcMyListData:XMLListCollection;
  
  private void onResult(Event:ResultEvent):void {}
  var xmlResult:XML = XML (Event.result);
  _xlcMyListData = new XMLListCollection (xmlResult.. asset);
  }
  
  []] >
  < / mx:Script >
  
  
  As stated before the app displayed data before with flex2 and the beta of flex 3. Is there something I'm missing now?
  

  My call to the server was wrong. It wasn't a problem with flex.

• Everyone has the circuit main flex fixed on a Canon 5 d?

  Last year I got the circuit main flex repaired on my Canon 5 d. The camera just stopped working and lights at all. I have never learned what was the cause of the failure of the circuit. Is it possible to change a lens without turning off the camera could cause harm?

  The repair was carried out 10 months ago (9/2014) and the same thing happened a couple of days - the camera would not turn.

  I did the usual diagnosis - check the battery power, took the battery and card flash, switching lenses without result. I fear that the same failure in my camera has occurred.

  Does anyone have a similar experience?

  Hello bakerstreet!

  Thanks for posting.

  It is recommended that you turn off the camera before swapping lenses, but it is difficult to say if it is causing the problems here.  I know that sometimes the battery may be the cause if she is exhausted because of his age.  Have you tried another newer battery in the camera?  If the camera feeds not on with another newer battery, so it's something that must be repaired by authorized Service Center.

  To start the repair process, you need to fill out a service request on our Web site.

  Moreover, since the camera is more than a year, you have the opportunity to participate in the Canon loyalty program in place.

  The option of the Canon loyalty program allows you to replace your current phone for a reduced fee, postage.  The original non-functioning camera would be then returned to Canon USA for recycling using a which would be offered prepaid shipping label.

  If you want to participate in this option, please call our sales in the 866-443-8002 Department, seven days a week, from 08:00 to midnight.  Let them know you have worked with online support and the Canon loyalty program.  Be sure to have your serial number of your camera when you call.

• How to send an email to the project mobile flex for blackberry playbook?

  Hello friends,

  I developed a small application for playbook. I want to send an email, use adoble flash builder burrito, there is no built-in functions available to send emails in flex 4.5, it can be achieved throug php, cold fusion, or asp.net. I don't know how do it, can someone send me the example to send an email to the project mobile flex.

  Thank you...

  There is no native email client in "flex". PB is not currently an API to use any "native" or "bridged" or by e-mail. If you just want to open the current, the default e-mail client, you can use navigateToURL with 'mailto' as url, or you can send the information to your own server, which can in turn SMTP information. Otherwise, you will need to write your own.

• The OPM upgrade problem

  
  Hi team,

  We do face-down question at the opening of the basis of rules with the new version of the OPM. We use November version 12.2 of the OPM and Oracle service cloud.

  1 created the (ABC) project using the version of August to the OPM

  2. we have improved the OPM in the version of November (as is forcibly pushed us to upgrade to the latest version due to upgrade in the clouds of Service Oracle)

  3. I tried to open the ABC project using the version of November, but he asks to upgrade to the version that we created using the version of August.

  Tried with underside as well but face same issue.

  We took the ABC project and make another copy (ABC_Ext).

  Open using the version of November but same problem.

  What is a normal process of upgrade rules if there is a change in the version of the OPM.

  Thank you

  Vivek

  I don't know what issue you face, when you open a project by using a newer version of the OPM, you will be asked to confirm that the project will be described here upgraded.as the library of Documentation Oracle policy Automation

  Please provide details of any errors you see if this process does not work as described.

• Clarification of the OPM regression tester.

  Hello

  I'm new to the OPM regression tester. I added a test script in the folder "Test Script" and added new test cases. I see that it is similar to the debugger. When I have the values of the attributes of entry and click on the run button, the test report shows that all my files were ignored. Can someone clarify the use of regression Tester?

  Thanks in advance.

  Kind regards

  Arup

  It is probably because you have not specified it had results for the test script and that you have not added the expected results for the test case.

  There are many articles in the Guide on the use of regression Tester OPM. The OPM (http://docs.oracle.com/html/E48373_01/toc.htm) User Guide home page, click on "Test Cases". I suggest to start with these items:

  • Set, change, or delete test scripts
  • Create a test case in an interview
  • Compare the test results with expected results

  See you soon,.

  Jasmine

• My apps to say that I am not connected to creative cloud, but I am. I tried to delete the opm.db file and connect again, no luck. Help?

  My apps to say that I am not connected to creative cloud, but I am. I tried to delete the opm.db file and connect again, no luck.

  I had no problem with this problem until today when I rebooted my laptop to install a driver for the tablet.

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Import the image in FLEX

  I'm testing Horizon FLEX, but I have problems to import an image. I followed the steps of creating a virtual machine with VMware Fusion Pro. Encrypted virtual machine, restrictions, type of restriction enabled = managed and registered Management Server (mirage).

  When I select the vmx file to download, I get the message that this is an invalid image. What can I do it wrong?

  This fix worked for me:

  -Open the .vmx in a text editor.

  -Implement "displayname" "displayName."

  -Save the .vmx

  -import the .vmx in FLEX administration console.

  It is in the release notes:

  • The Horizon FLEX server cannot handle the full virtual machine name defined in the .vmx for a virtual machine if the displayName property is not what she expected.
    Solution: Edit the .vmx for the virtual machine so that the N displayName is uppercase and all other letters are lower case.

• HLS with Flex 4.7

  Hello

  I am facing a problem of HLS with FMS 4.5 application (also tried with FMS 5). I'm following this link http://help.adobe.com/en_US/flashmediaserver/devguide/WSd391de4d9c7bd609-52e437a812a3725df a0 - 8000.html.

  When I publish direct to livepkgr application using GFFE (Flash media live encoder). That's all works fine on my ios devices.

  But when I publish using the Flex 4.7 code, the sound does not come, and even the video is stop playing after a certain time on ios devices.

  Anyone have any idea why this is happening. Any help will be appreciated.

  I add code to review. (You can create a flex project and creation_complete event call 'windowedapplication1_creationCompleteHandler'. And replace the FMS_serverIp fms reall server ip.

  < fx:Script >

  <! [CDATA]

  Import mx.core.UIComponent;

  Import mx.events.FlexEvent;

  var nc:NetConnection;

  var: camera;

  protected function

  < fx:Script >

  <! [CDATA]

  Import mx.core.UIComponent;

  Import mx.events.FlexEvent;

  var nc:NetConnection;

  var: camera;

  protected function windowedapplication1_creationCompleteHandler(event: FlexEvent): void {}

  var ui:UIComponent = new UIComponent();

  Video: v var = new Video();

  ui.addChild (v);

  this.addElement (ui);

  This.CAM = Camera.getCamera ();

  this.cam.setMode (320, 240, 30);

  this.cam.setQuality (0, 100);

  v.attachCamera (this.cam);

  This.NC = new NetConnection();

  This.NC.client = this;

  this.nc.addEventListener (NetStatusEvent.NET_STATUS, startStream);

  This.NC.Connect ("rtmp://FMS_serverIp/livepkgr/");

  }

  protected function startStream(event:NetStatusEvent):void

  {

  Switch (event.info.code) {}

  case "NetConnection.Connect.Success":

  trace ("stream init" + this.nc.uri);

  var s:NetStream = new NetStream (this.nc);

  var h264Settings:H264VideoStreamSettings; s

  h264Settings = new H264VideoStreamSettings();

  h264Settings.setProfileLevel (H264Profile.MAIN, H264Level.LEVEL_1_2);

  h264Settings.setmode (320,240,30);

  s.videoStreamSettings = h264Settings;

  s.client = this;

  s.addEventListener (NetStatusEvent.NET_STATUS, checkMediaStatus);

  s.attachCamera (this.cam);

  s.attachAudio (Microphone.getMicrophone ());

  s.Publish ("livestream? ADBE-Live-Event = LiveEvent");

  trace ("stream publish...");

  break;

  }

  }

  protected function checkMediaStatus(event:NetStatusEvent):void

  {

  trace ("stream status" + event.info.code);

  }

  []] >

  < / fx:Script >

  Things work simply because of the Audio. Flex can not provide ACC encoding.

  If Flex with wowza can produce HLS/HDS.

  But Flex with FMS cannot produce HLS/HDS.

  Really funny and

  For more information, see this forum and please add your repies to the forum so that Adobe can do things.

  http://forums.Adobe.com/message/5942512#5942512