Firefox opens not except in safe mode

Similar Questions

• Vista does not, except in safe mode?

  Have a frined, dell sent him a new hd. It crashes except in safe mode. He has tried to restore factory reimage.

  Is it sounds like a virus or a hardware problem? Any suggestions would be helpful. Thanks, Bruce

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows open will not close and the computer does not except in safe mode. The mouse works, but can not open a file or a program.

  I ran the twice successfully system restore, but that did not help. When a window is blocked, hit CTRL-Alt-Del shows an error message "failure of Security Options. I use Vista. Open windows on the desktop were often not well closed for months, but now the computer freezes as soon as I opened the first window. Busy circle is present. Mouse still works but can't do anything for files, etc.

  Hello

  1. don't you make changes to your computer, after which the issue started?

  Follow these steps and check if the problem persists.

  Step 1:

  If it works in safe mode, I suggest that you can start your computer in a clean boot State and check if the problem persists.

  Note: Follow step 7 to your computer as usual.

  Step 2:

  You can perform disk cleanup to clean unwanted files on the computer.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

• Firefox won't open, not even in safe mode!

  Everything worked Friday (when I finally used Firefox) but this morning when I turned on my computer, Firefox will not work. I tried clicking on the toolbar button and the link in the start menu, nor work. I tried uninstalling and reinstalling, does not help. It gives me a little icon running, but disappears quickly without having to open Firefox at all. Is someone can you please help me understand why I can't get Firefox to open? Internet Explorer works fine, so all I can imagine is that an update has occurred during shutdown Friday.

  Hello

  Please try to use our function of refreshment.

  Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.

• shortcuts don't work not except in safe mode

  original problem - could not access the files on server - received ID username/password invalid even after reset of net admin user. What new user created on the desktop icons and start menu has stopped working (double-click appeared to do nothing).

  After experimentation, found that the opening of any .lnk returns fileNotFound exception. In safe mode without problem.

  A ran two separate a / v verifies - ESET and MalwareBytes.

  Tried to disable as many external services and relevant as appeared startup tasks, without result.

  Problem with new shortcuts and newly created the local administrator user.

  This is updated from windows. No effect.

  Help, please! Thank you.

  Hello chaim handler1,.

  I suggest to try in a clean boot in order to eliminate any possible conflict of third parties:

  Step 1: Perform a clean boot
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
  a. log in the computer using an account with administrator rights.
  b. ClickStartCollapse this includes this image, typemsconfig.exe in the search box, theStart then press ENTER to start the System Configuration Utility.Collapse this includes this imageIf you are prompted for an administrator password or for confirmation, type your password, or clickContinue.
  c. arencontre, clickSelective Startup tab and then click on clear theLoad startup items check box. (Use Boot check box is not available.)
  d. on theServicestab, select hide it all the box, check Microsoft services, and then clickDisable all.

  Note following this step lets Microsoft services continue to operate. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
  e. click OK, and then to clickRestart.
  Step 2: Enable half the services
  a. follow steps 1a and 1B to start the System Configuration utility.
  b. click on the services tab and then click to select theHide all Microsoft services checkbox.
  c. Click to select half of the check boxes in the service list.
  d. click OK, and then to clickRestart.
   
  Step 3: Determine whether the problem returns
  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services, and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.
  Step 4: Enable half of the startup items
  a. perform a clean boot by repeating step 1.
  b. click the theStartup tab and then click to select half of the check boxes in the list of items of theStartup.
  c. click OK, and then to clickRestart.
   
  Step 5: Determine whether the problem returns
  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have initially enabled in the list of items of theStartup.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are disabled in the list of items of theStartup. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be the cause of the problem, repeat step 1 and step 2 without selecting theHide all the box Microsoft services at every step.
  Step 6: Resolve the problem
  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.
  Step 7: Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. ClickStart collapse that includes this image, typemsconfig.exe in the search box and press ENTER. Collapse this includes this image
  If you are prompted for an administrator password or for confirmation, type your password, or clickContinue.
  b. on the arencontre tab, click Start zone option, and then click OK.
  c. When you are prompted to restart the computer, clickRestart.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• keyboard does not except in safe mode with prompt c.

  After using malwarebutes to remove the virus removal free MS, half of the keyboard on my sons computer is dead unless I start in safe mode with command prompt.

  Looks like my dose of something screwed virus. any ideas?

  Hello

  1 have you tried the Microsoft Safety Scanner in the previous answer?

  This could be a problem of USB as well. Refer to this link and check if it helps: http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/usb-root-hub-gets-this-error-windows-cannot-load/8eb91876-0723-4351-9e4c-a82608f53c22

• Firefox crashes when I open it (except in safe mode). Reinstalled twice, did not help. Also, turn off hardware acceleration, etc.. Windows XP, Firefox 6.

  Whenever I try to open Firefox, it hangs and does not open. Get the crash reporter. I've uninstalled and reinstalled twice, but it did not help. Follow the instructions on your site for the modules disabling and disabling hardware accerlation. Firefox crashes in Mode without failure. I use the latest version of Firefox with Windows XP. Thank you

  
  

• After installing Win7 x 32 SP1, I can't launch Firefox. Not even in safe mode. I uninstalled Firefox and re-installed the program. Does not start.

  After you have installed SP1 Firefox stop working and Internet Explorer stop working. I can only use Chrome as browser at the moment.

  See:

  • http://KB.mozillazine.org/Browser_will_not_start_up

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Windows vista Theme it's not uninstall and safe mode does not work

  I try to uninstall the windows vista theme, but it is not uninstalled. A black screen is coming, and it is disappearing. I also try to uninstall the theme of windows vista by creating my new account, but it is not uninstall same problem is coming. I also try to uninstall by opening my PC in safe mode. but my safe mode does not open

  I hope you answer me as soon as possible.

  Hello

  Follow the link

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

• Computer stops in normal mode. Do not use the safe mode, because I have no sound, or security out there, please help?

  Computer stops in normal mode quickly. Do not use in safe mode, because I have no sound or security, please help?

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way? Keep in mind
  This associated heat does not always mean too much heat as it is often a part or a component
  who is too sensitive to normal levels even heat.

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Check with these utilities to see if information may be collected: run BlueScreenView
  to see if there were any BlueScreens and verify in MyEventViewer at shutdown
  (or a few seconds before) See the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
  or time of the BSOD or event to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it a bit before and after the time of the event or BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
  application of all accidents occurred in your system. The information breaks down is extracted from the
  .WER files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• El capitan update fails to restart except in safe mode. can I recover the operating system in safe mode?

  ElCapitan updated (from apple update) fails to complete restart, except in safe mode. How can I recover or reinstall the OS of a restart to safe mode?

  Boot into Recovery (R command) and run disk utility > first aid on your MacintoshHD

  You can always reinstall the os x from here, if necessary

  OS X: on OS X Recovery - Apple Support

• Firefox opens not all sites I've ever been to before

  Firefox opens not all new sites that I've never been before, or he lets me get questions that are new on search at the top right of the screen. All sites that have been previously visited are very well - for new I just get the little circle that goes round (sorry, I'm not really computer) until finally, it tells me that it has expired. I can get to these new sites very well through Explorer. I can remember bad but not for a long time there was an update for something (which may have been java or google) and later a box popped up and I think I checked something that I thought that I had to check, but now think I wasn't - but have had this problem since.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• iMac, 2012, 27″, will not start, not even in safe mode

  IMac my wife, 2012, 27″, El Capitan, will not start, not even in safe mode. The problem started during the installation of Mac Office 365 (2016), although the installation on my machine worked fine.

  The following two photos are sure Mac verbose mode. (Photos are from consecutive boots, that the camera did not focus, but the behavior of the Mac is constant in boots attempts.)

  http://www.jdawiseman.com/2016/20160218_230538_mac_wont_boot.jpg

  http://www.jdawiseman.com/2016/20160218_230059_mac_wont_boot.jpg

  Disc utilities reported an error. Although fsck - fy is not.

  Please, kind of people from the communities of Apple support, what should I try then?

  Thank you.

  Have you tried to boot into recovery mode. Combinations of keys start for Mac - Apple Support

  Select disk utility, then check the disc. Resolve startup issues and perform maintenance on disk with disk utility and fsck - Apple Support

  How much free disk space hard do you?

  What is the error Disk Utility has.

  Kim

• Windows xp does not start in safe mode how to

  Computer says windows did not start successfully and does not start in safe mode, will not restart, do not go back to the last known good configuration

  When you choose to start safe mode, which is the last thing you see on the screen?

  When you arrive at the menu of Boot Options Advanced F8, you need to choose in this menu, the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  You won't get past step 1 of KB307654 or install the Recovery Console or do a repair install without a real XP bootable installation CD that matches your currently installed Service Pack (very unlikely).

  You have a real installation CD bootable XP that corresponds to your currently installed Service Pack?

• wireless mouse does not work in safe mode. I am informed by Logitech, it is a matter of microsoft HID. What now?

  I run XP and IE. You will need to use the mouse in safe mode. normally works in normal mode.

  Logitech says it's a matter of Microsoft HID.

  It is literally true, but incomplete and very misleading.

  See http://support.microsoft.com/kb/310496

  To work around this problem, use a keyboard or a mouse, instead of a USB keyboard or mouse.

  This behavior is by design.

  In the case of USB input devices, so that they work in safe mode, the system must have a BIOS with USB support for input devices and USB legacy mode must be enabled.

  NOTE: USB devices are not loaded in safe mode, unless the manufacturer requests and provides BIOS support for the USB device in addition to input devices.

  Check your BIOS for the applicable USB settings.