The passage to vSphere VMWare Server 2.0?  How?

Similar Questions

• Conversion of the virtual machines in VMWare Server 1.0.5 to vSphere Enterprise

  I have a couple of windows XP virtual machines running on VMWare Server 1.0.5.  Can someone point me to instructions for turning them into vSphere (ESXi 4)? The conversion occurs in the vCenter Server or with a separate program?  Thank you!

  VMware Converter, which is integrated with vCenter Server and the Client must be able to do this by directing it to the virtual VMware Server 1.0.5 computer files.  You just need to save the pluggin converter in the Client to use vCenter converter function.

• Cannot save the virtual machine in VMWare Server 2

  Hi all:

  I created a VM (12.1 OpenSuSE 32bits) in VMWare Workstation 7; then I copied it to a host VMWare Server 2.

  When I try to save the virtual machine via the web, the server fails (or at least interrupts the response from Web page), so I tried to save it via command line.

  After searching a bit I found this:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1006160

  The question is now that I can't find any vmware-cmd anywhere, and when I run vmware-vim-cmd I get the following error:

  vmh2: / data/vmachines/postgresql-box # vim - vmware - cmd solo/registervm /data/vmines/postgresql-box/postgresql-box.vmx
  Connection failed: vim.fault.NoPermission

  So I'm stuck... someone can help me?

  BTW: what is ESX, ESXi and what version of ESXi is included in VMWare Server 2?

  Thank you very much

  Luis

  I can't tell you exactly what are the causes of the problem. What I would try (a solution) is to create a new virtual machine in VMware Server with the same specifications as the original one, then copy the two files hard in the new virtual machine folder and edit the .vmx file for the new VM 'OpenSuSE - 12.1 - cl1 - 000001.vmdk' use as its virtual drive.

  André

• Import the virtual machine of VMWare Server 2.0

  I want to hang in VMWare Server 2.0 to ESXi 3.5, how to import my VMWare VM for ESXi?

  I installed ESXi 3.5 on my test lab server and all I see is an option to import a device and not a VM.

  This feature is still available?

  Thank you

  Yes, this feature is available, but it will take VMware Converter - this will allow you to go to your VM VMware Server ESX/ESXi.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Import the VCB backups in VMWare Server 2.0 Automatic

  Hello

  I had two questions, on which I was wondering...

  The real thing, I was wondering all is if someone made a script, fixing up the release of VCB, so it is bootable from a standard VMWare Server 2?

  (I think / hope someone has already made as part of an AIP or something...)

  The problem is that VCB adds the path of SCSI in the VMDK-filenames, but it does not add it to the VMX file.

  If these are mapped to the other the VMX or by renaming the files the VCB is bootable in Server VMW 2.

  (but 'less restoreable' of VCB on the other hand...)

  This would help me a lot, couse then I could put my VCB backups to an external drive and give the drive to our suppliers

  then they test things in the production environment. This could easily be written, but I don't want to invent wheels all my life,

  so if others have this I appreciate real...

  The second thing I was wondering about is if it is the right part of the forum for these questions, or if they should go under something else...

  Colombia-British

  Since the change of name is always following the same convention, I do not think that it is necessary to read the VMX file.

  This script deletes the prefix «scsi...» "of all the VMDK files.

  $VCBfolder = 
  $vm =                                          # Subfolder in directory $VCBfolder
  
  $vmPath = $VCBfolder + "\" + $vm
  $oldDir = (pwd).Path
  cd $vmPath
  $files = @(Get-Item -Path "*" -Filter "*.vmdk")
  foreach($file in $files){
    $dummy = $file.Name -match "^scsi\d*-\d*-\d*-(.*\.vmdk)"
    Rename-Item $file.Name $matches[1]
  }
  cd $oldDir
  

• How to assign the IP address of the virtual machine on VMware Server 2.0.

  Hey guys,.

  I've been busy, actually not really busy, spent my whole day with this problem... I could just find the same solution I am looking for all the documents...

  I have a VMware Server 2.0 installed on CentOS 5.2, and I have 5 dedicated IP address or static with this server...

  Now, I created a VM with CentOS 4.7 for testing purposes, but I don't know how assing one of the IP address for this virtual machine.

  I want to just that my VM to be accessible from external internet connections...

  I have;

  64.XX.XX.218

  64.XX.XX.219

  64.XX.XX.220

  64.XX.XX.221

  64.XX.XX.222

  assigned IP address. First of all it is belong to the main server dedicated, I would attribute the 220 IP to my VM, but how? It's worth it to me...

  Any help will be much appreciated...

  Best regards

  Sezer DEGE.

  silencegate wrote:

  This server hosted one of the DC in the United States

  Okay, that means, is not in your server room.

  Your computer has several available ethernet network interfaces: eth0, eth0: 0,

  eth0: 1, eth0:2, eth0:3. Which do you want to bridge vmnet0?

  Your server has only one physical ethernet interface. But there are multiple ip addresses configured on it. If you want to know, how it works and how it is configured, you can read this page.

  You need to reconfigure your network VMware Server 2 to fill the other or several networks. VMware Server documentation is explained on p. 222 and following. In fact, for linux, it is page 229 and includes 'ifconfig' to know what special device (eth0: 0...) what IP address, then run ' vmware - config.pl ' is used to assign the new configuration. But please read the documentation for more details.

• VMWare Server 2.  How to add new series numbers?

  Good afternoon

  I have already installed VMWare Server.  When I try to run a new additional virtual machine or try to run a vmx file, always get the following message:

  "Error: there are not enough licenses installed to perform the operation."

  More data: power StatePowered off the OSOther 2.6 x Linux (32-bit) hardware virtual VersionVersion 4 VM updated DNS available NameNot

  I tried with multiple guest virtual machines, still the same message... then...

  Looks like I have no permit, then I downloaded from this URI: http://register.VMware.com/content/registration.html , 50 licenses.

  Well, I got a list of serial number 50 this way: XXXXX-XXXXXX.

  XXXXX-XXXXXX...

  but... no idea where to put them? !!! I gaze upward in the path, but I can't find any file, I also tried to display the Tomcat logs but nothing, docs wanted...

  That is the question:where should I put this serial numbers?

  Thank you.

  I know that there was a problem with the 2.0.0 server that did not

  You then enter serials in the user interface.  Don't know if this has been fixed

  2.0.1 or not.

  Uninstall, then reinstall, then enter the serial number during installation.

• Error keyframe after the passage of my Windows English interface. How should I do?

  (I got a keyframe) error after the passage of my Windows English interface, I could save and open projects normally!   Unfortunately damaged projects still did not work...  But the news once is ok, and I hope that the mistake won't happen again! But the guys of http://www.premiere-pro

  

  Tengo estos errores.

  Post edited by: Kevin Monahan

  Reason: Next time create a shorter title, then put the text describing your problem to the next page.

  Hi C Del Producciones,

  Uninstall iCloud. See this forum post: Debug event f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe

  Thank you

  Kevin

• Failed to get the log in page of VMware Server

  Hello

  I'm new to the forum so apologies if I am posting this in the wrong place.

  I installed VMware server to December 2008 to use Win XP on it because my laptop is preinstalled with Vista.

  It worked all fine and I used it for a few months.

  However, I have not consulted for like the past 8 months. Now, I want to once again since, but have not been able to.

  If I remember correctly, I used to access the console remotely via Internet Explorer simply log on and it works.

  But now when I try - Internet Explorer 8 comes with the "Internet Explorer cannot display the webpage" page and Firefox comes with its 'unable to connect' page.

  I tried to go back to IE7 and also repair the installation (by running again the Setup file), but none worked.

  After accessing services.msc - I found that all VMware services are or may be given except on the VMware host Agent that does not start.

  It comes up with the error message "Windows could not start the VMware host on Local computer Agent. For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service-1-specific error code. »

  I don't know what to do with it and how to address this issue either.

  Any help on this would be much appreciated as I need to check what is on this XP machine.

  Thanks in advance ~

  Hwciua4i wrote:

  However, I don't know what they mean by disabling the browser service.

  Open the service manager in Windows and you can see all the services that are running. One of them is called "browser".

  What about rename it pass it directory - do you want to say to just change the name of the folder called "pass" to the place that I installed

  VMware Server? If this name should so I change to?

  Yes. I suggest "bbrbblllwurbschgarbel" or something that is more readable.

  And regarding the uninstalling and reinstalling VMware Server 2.0 - I wanted to ask if that would erase / affect the virtual machines I created?

  I tried just to fix the installation but was afraid to uninstall & reinstall.

  No it does not affect the guests. If you want to be absolutely sure, create a copy of the virtual machine comments (copy the directory parent of all guests and all the money).

  Moreover, I had VMware server operational on this laptop before Vista - it's just I hadn't touched for a long time and now I

  cannot make it work ~

  If she had run once it does not mean he always runs on a non supported host OS. A simple patch that changes some .dll could slow everything down.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• I can't connect to the remote desktop through VMWare on my windows vista with IE9.

  I need to set up a remote desktop access in a remote installation. I got an ID and a personal password to access their desktop remotely, but I can't get to the portal clinet vew VMWare server. I am able to set up access on my other computers with windows XP IE8. and Windows 7 IE8, but not windows Vsta IE9. I tried to download enhanceie.com/dl/IE8v.reg but when I click on the icon to access the portal I get a «Cannot find the file specified...» meeage "does anyone have a solution to this problem?

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Vista on Technet. Please post your question in the Technet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/windowsvistaitpro

• VMware Server on Windows 2008 R2 Server Core installation

  Hi guys!

  I installed the latest version of Vmware server on our new Windows 2008 R2 Server core installation, but I have a problem with it. When I create a virtual computer and try to start the Web UI:

  General system error occurred: unable to connect to the virtual machine

  Do you know something about the nature of this message? The Server service not had access to the possuble vitrual machine? But how can it create if it doesn't have access? I have not found the log files created in the folder of the virtual machine.

  Thank you for your help.

  Kind regards

  Jeremy

  I think that Server Core is an unsupported operating system. Please take a look at http://www.vmware.com/pdf/vmserver2.pdf (page 25)

  concerning

  Jose Ruelas B

  http://aservir.WordPress.com

• SLED 11 host - VMware Server 1 upgrade to VMware Server 2, former VM work now "(invalid).

  The other day, I upgraded my work, the latest installation of VMware Server 1 to the latest VMware Server 2 for linux 64. Everything went perfectly with the installation, except for the little matter that now my Windows Vista, Windows XP SP 3 and my VM Windows 2000 are listed as "not valid" in the inventory. They have never worked.

  What is the best way to start troubleshooting this?

  Sorry we couldn't get you go - I'm sure we could give enough time.

  If you have installed from the rpm package you should just be able to uninstall via an RPM EI and then will delete the virtual machines and their associated files.

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Problem installing VMWare Server - code 1603

  I thought that I would see how far I could get with the help of VMWare to set up a temporary database server on my machine. However, I couldn't even in what concerns installation, it seems!

  My machine is a server on a corporate network and WIndows XP (SP3). My user account has the rights of a local administrator on the computer, and I installed a number of other things on this machine without problems of access rights.  However, when I try and install VMWare on my machine I get a box of selectionneret indicating:

  Setup cannot continue. The installer of Microsoft run-time DLL could not complete the installation

  Further investigation on the newspapers donnГ the log file attached, the outline that attracted my interest being:

  Bootstrapper: 07/09/09 16:32:20 no upgrade is necessary. Version of the system meets the minimum requirements
  Bootstrapper: 07/09/09 16:32:20 Found 'C:\DOCUME_{1\turnerbe\LOCALS}1\Temp\ {AF08C71F-F822-4416-87A9-2BBF5A8A5F12}_{setup\vcredist_x86.exe.
  "" Bootstrapper: 07/09/09 16:32:20 attempt to launch "" C:\DOCUME}1\turnerbe\LOCALS_{1\Temp\ {AF08C71F-F822-4416-87A9-2BBF5A8A5F12}}setup\vcredist_x86.exe "" / q/c: "msiexec-i vcredist.msi - qn - Moel + C:\DOCUME_{1\turnerbe\LOCALS}1\Temp\vm_vc8SP1.log ARPSYSTEMCOMPONENT = 1".
  Bootstrapper: 07/09/09 16:32:24 child came out with code 1603
  Bootstrapper: 07/09/09 16:32:24 process returned 1603
  Bootstrapper: 07/09/09 16:32:24 launch VC8 installer dll failed with 1603.
  Bootstrapper: 07/09/09 16:32:27 removal
  Bootstrapper: 07/09/09 16:32:27 exit facility code is 1603

  What led me to the following Knowledge Base article:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1009167

  So I tried to restart the machine, check if VMWare products were still installed (they weren't), delete all the entries in VMWare on the registry and I tried to reinstall. But nothing helps, the same problem happened again.

  I even following the link in the article KB http://support.Microsoft.com/kb/555175 and tried method 1 (cancellation of registration and re-registration of the Installer) but there is nothing either.

  So I'm a bit of a loss what to try next door get VMWare Server 2 installed on my machine. I already had to VMWare Server 1 is installed on this machine (again, using the same login user) but removed during the case to install VMWare Server 2. Currently, I don't have any VMWare products installed on the machine.

  Thanks for all the suggestions!

  Ben

  Hello

  Check Re: VM 2 fails to install initially on DLL error, the last message.

  J.

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• move Virtual GuestOS in Vmware Server 2.0 to ESX Server 3.5 U4

  Hello

  We intend to pass the 3 servers in Vmware Server 2.0 to server Vmware ESX 3.5 U4.

  Can anyone tell me please what it takes...

  I downloaded the OVF tool and installed, it works very well, so now I know how to create a .ovf from a .vmx file

  but the problem is when I created the file .ovf from a .vmx file located on Vmware server 2.0, I got an error when I tried to import it into ESX via VMWare Vcenter... which is:

  the family of equipment if the paskage of the FVO is not supported: vmx-07

  and ths is true, because the hardware platform where the Vmware Server 2.0 is running is not the same ESX 3.5 server running...

  I hope that someone can show me what steps I must take to achieve this...

  Thank you!!

  Best regards

  Tom

  I thought that I could simply convert without downloading for ESX as the conversion process runs... but this is not possible

  No it's not.  It will make the COPY of the virtual machine, but in order to convert anything, there need duplicate files and make it compatible.  So really all that is done is change of version/type of the VMDK to one that is suitable for ESX read.  It's like the conversion of a pdf document.  Copy you it, but older versions of Acrobat will not able to read the most recent versions.  It's the same, the content is there, simply to make it readable.

• Find my host PID of virtual machines VMware Server 2.0

  Hello!

  With VMware Server 1.x, it was easy for me to find which machine used what PID. I just had to connect to the web interface of VMware Server and voila I could see my names of virtual machines and their respective PIDs.

  Now with VMware Server 2 I can't find anywhere them in the web console of VMware!

  Instead I use Process Explorer (and market - I find that PID is related to computer)...

  Anyone has any idea where I can get this info quickly in VMware software/console/whatever?

  Thanx.

  Sorry, I was showing you the contents first to design you what you actually wanted.

  Try the attached vbs script that isolates the configuration file .vmx and PID for you.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.