Failed to get the log in page of VMware Server

Similar Questions

• New configured vlan4 failed to get the IP address of our ad server

  Any guy who can help me: due to the expansion of network, I need allocate a new subnet 192.168.4.0 on our lan co. existing, 3 private LAN 192.168.1.0 (primary, all related Windows AD server and internet devices). 192.168.2.0 and 3.0 are Department LAN for user workstations. All desktop user on all the networks had the host Windows AD 192.168.1.20 IP. I used a new switch 6249 dell to configure a new VLAN 192.168.4.0, but user on this network failed to get IP of the host of the AD. Could someone give advice? Console > console en #show run! Current configuration:! Description of the system "PowerConnect 6248, 3.3.10.3, VxWorks 6.5! Version of the system 3.3.10.3 software! Passage mode is configured as disabled! Configure the vlan database vlan 4 vlan routing 4 1 output battery 1 2 Member out ip address 192.168.1.221 255.255.255.0 ip default-gateway 192.168.1.1 no ipv6 do enable the interface vlan 4 routing ip address 192.168.4.22 255.255.255.0 ip helper-address 192.168.1.20 ip 192.168.1.20 domain helper-address dhcp ip mtu 1500 output user name 'admin' password level 15 dhcp 0192023a7bbd73250516f069df18b500 encrypted l2relay dhcp l2relay vlan 4! interface ethernet 1/g13 switchport access vlan 4 output! interface ethernet 1/g14 switchport access vlan 4 output! interface ethernet 1/g15 switchport access vlan 4 output! interface ethernet 1/g16 switchport access vlan 4 output! interface switchport ethernet 1/g17 access vlan 4 output! interface ethernet 1/g18 switchport access vlan 4 output! interface ethernet 1/g19 switchport access vlan 4 output! interface ethernet 1/g20 switchport access vlan 4 output! interface ethernet 1/g21 switchport access vlan 4 output! interface ethernet 1/g22 switchport access vlan 4 output! interface ethernet 1/g23 switchport access vlan 4 output! interface ethernet 1/g24 switchport access vlan 4 Server snmp community public rw to exit

  Remove the routing of the 6248

  Delete the IP address that you assigned to 4 VLAN on the 6248

  On the S5624P create VLAN 4 and assign an IP address

  On the S5624P implementation of the programme of assistance to point to the address DHCP IP

  Make sure that the S5624P performs the routing VLAN.

• Qosmio F20 - 153 - stuck on the log in page

  Hello

  I have a Qosmio F20 - 153 and when I boot up I get beyond the log in page. It won't let me choose my username so I'm just stuck on this screen. I think I need to perform a recovery CD system but I don't have the CD. Is it possible to download the CD recovery from somewhere, or have any other ideas?

  Thank you

  Hello

  > Is it possible to download the CD recovery from somewhere or have any other ideas?

  Unfortunately, there is no link to download. Please order for money from Toshiba:

  [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx]

  Or copy of windows disk and do a custom installation. All drivers and utilities can be found here:

  [Toshiba drivers | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

• Error: ORA-16757: failed to get the value of this property

  Hi all
  I have an error:
  DGMGRL > see the database dbname_stb LogXptStatus;
  Error: ORA-16757: failed to get the value of this property
  I check:
  DGMGRL > see the configuration;
  
  Configuration - dbname_dg
  
  Protection mode: MaxPerformance
  Databases:
  dbname_pr - primary database
  dbname_stb - physical of the standby database
  
  Fast-Start Failover: DISABLED
  
  The configuration status:
  SUCCESS
  
  drcdbname_stb.log:
  RSM0: Received the request the property Get: rid = 0 x 01010000, pid = 54
  2012-10-17 15:21:14.702 of database Resource: get the LogXptStatus property
  RSM 15:21:14.702 2012-10-17 error: trying to interview a 'LogXptStatus' primary type property on a standby database resource.
  2012 10-17 error 15:21:14.702 database resource GetProperty (16501,16757)
  
  I don't understand this error?
  Thank you all.

  Take a look on this

  Re: ORA-00254 | Trouble with dataguard

• Failed to get the connection-; First exception is: java.lang.NullPointerExceptio

  Hello:
  
  When I got to connection requests, click any OAM following errors. All forms are good.
  An error has occurred!
  Failed to get the connection-; First exception is: java.lang.NullPointerException
  
  I don't know when it started to be like that, but I applied a few patches yesterday. Thanks in advance for your help.

  Salvation;

  You don't need to check the log file. Check the log file for details of the error apache.

  By the way you are trying
  1. close apps services
  2. run autoconfig on dbtier that
  3. run autoconfig on appstier and make sure that you have no error message, than check again question

  Respect of
  HELIOS

• Failed to get the status of printer/bizhub Konica Minolta C654e

  Failed to get the status of printer/bizhub Konica Minolta C654e

  Cannot print from my Mac.

  With the limited information you supplied I would check the configuration of the print queue. If you open information system (located under Applications > utilities), you will see a column on the left and if you select printers the right pane displays the print queue information. Note If you have multiple printers, you can select in the right upper pane to view its information in the bottom right pane. Can you copy this information and paste it here.

• When I try to bookmark a new page, I don't get the window of "Page bookmarked or edit this bookmark. I t place the site in my favorites, but I have to go to "organize" bookmarks in order to put it where it belongs.

  When I try to bookmark a new page, I don't get the window of "Page bookmarked or edit this bookmark. I t place the site in my favorites, but I have to go to "organize" bookmarks in order to put it where it belongs.

  Which extensions you have installed?
  It seems to me that some sort of 'social bookmarks' extension changed this window edit this bookmark, based on the presence of this line of "Rating" at the bottom.

• Could not get the sign in page - error message "object moved here."

  I am unable to get the sign in page to connect to my live account. I get the message "Object moved to here" and Microsoft Live Hotmail was not able to complete this form - Contact Microsoft

  Hello

  I'm sorry, but we cannot help with hotmail problems in these forums in response to vista

  Please repost your question in hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

  Forums

  E-mail client and the appliance issues

  Hotmail Sign In questions

  Lost or deleted emails

  People and Contacts

  Reading, writing, and formatting mail

  Sending and receiving mail

  Sign in, and sign to the top and account security

  Using the Hotmail calendar

  Using Web Messenger

   

   

  Consult with Microsoft Certified Solutions

  How to work the views Active Hotmail?

  Your account has been temporarily blocked

  What to do if you can't connect to Windows Live Hotmail

  Compromised account - unauthorized account access

  Reset your Windows Live ID password

  Error when you try to send an e-mail: your message seems to have triggered our spam filters.

  Change your Windows Live ID password

• com.sun.messaging.jmq.admin.apps.broker.BrokerCmd failed to get the exit code of the child.

  I use D:\MessageQueue4_5\mq\bin\imqcmd.exe to get heads of JMS queues. In most of the facilities, I can retrieve the results without problem.

  At a single facility, however, I get an error when you try to run this command. Called with no arguments, it should display a list of available commands. But that's what I get instead:

  D:\utilities\imqChk > d:\MessageQueue4_5\mq\bin\imqcmd.exe

  Boot process failed.

  Could not run

  Java

  -cp

  d:\MessageQueue4_5\mq\lib\imqadmin.jar;

  d:\MessageQueue4_5\mq\lib\fscontext.jar

  -Dimq.home=d:\MessageQueue4_5\mq

  -Dimq.etchome=d:\MessageQueue4_5\mq\... \etc\mq

  com.sun.messaging.jmq.admin.apps.broker.BrokerCmd failed to get the exit code of the child.

  Other info:

  • Java is installed (version 1.7.0_17).
  • QBrowser using, I can sign in successfully and retrieve information from queue.
  • All of the named files and jar files are where they are supposed to be within the meaning of the doce above.

  I was not able to locate the source of the problem. Any ideas would be greatly appreciated.

  Thank you.

  I had this same problem and solved by editing the file \glassfish3\mq\etc\imqenv.conf manually by setting IMQ_DEFAULT_JAVAHOME as follows:

  IMQ_DEFAULT_JAVAHOME = / Files/Java/jdk1.7.0_45 program

  Note the orientation of the slash. It's on Windows, and when I used with Windows style slash escape sequence, it does not solve this problem only when I used the mangled Unix style done.

  Hope this helps,

  -Noah

• Can't mount NFS share - operation failed, diagnostics report: failed to get the path console for volume

  I'm trying to mount a NFS on ESXI 6 volume, but continue to operate in the error.  Googling everything nothing helped, so I'm here. Error:

  Call "HostDatastoreSystem.CreateNasDatastore" of object "ha-datastoresystem" on ESXi '192.168.xx.xx' failed.

  Operation failed, the diagnostic report: failed to get the path of the console for the volume, the name of the sample.

  The NFS share is located on a synology nas. I checked the permissions and configuration. Everything seems correct based on the various boards and KB articles.

  Ideas?

  Thank you.

  Find the esx.conf file in/etc/vmware.

  If you could also share a copy with me...

  Try to mount the NFS VMware KB: Volume fails with the error: could not resolve the host name

  Check the link as well below.

  http://www.Bussink.ch/?p=1640

• Failed to get the disk partition information when you add the new data store

  Hello

  Update my ESX to version 4 Update 1 (4.0.0, 256968). Now, I'm trying to add a new data store to a cluster in vCenter and receive the following error message when I will review the current structure of the disc "error when configuring the host: failed to get the disk partition information. When I click back, then next, there's no error message but in the formatting window, I get the error "Object reference" not set to an instance of an object.

  I see this question has been asked before, but I can't seem to find an appropriate response. Anyone? The interface using CLI instead of vCenter isn't an option (alignment VMFS, workload and so on)

  I use Dell R900 with an EMC Symmetrix VMax SAN

  The size of the LUN I want to add is 741 GB

  Concerning

  Marius Aulie

  If you have a virtual machine for Windows test, you could do the following, to ensure that the logic unit number has a clean partition table:

  -set the LUN as a GROSS physical to virtual machine device

  -Run diskpart, select the drive and run the CLEAN command

  -detach the LUN to the virtual machine

  -try to create the data on the LUN VMFS store

  The size of the block of the data store where the VM test can be a problem with the above. Due to the size of the LUN, the size of the block of the data store must be at least 4 MB. Attach the LUN to a physical test system could be an alternative.

  André

• Errors running SQLIOSim - Simulator/o SQL - error: 0x8007045D error text: the request could not be performed because of an i/o device error. Description: failed to get the info from cache drive to C:\

  When we execute SQLIOSim on a Server Windows 2003 VM hosted on an ESX 3.01 or 3.5 server, you get the following messages:

  Error: 0x8007045D

  Text of the error: the request could not be performed because of an i/o device error.

  Description: Failed to get the info from cache drive to C:\

  Anyone know what is the cause or how to solve the problem (if it is a question)?

  Thank you

  Had the same error and found this blog:

  http://blogs.msdn.com/psssql/archive/2008/01/14/SQLIOSim-error-request-could-not-be-performed-unable-to-get-disk-cache-info.aspx

  It will be useful.

• When people ask me to update creative cloud and click on 'Install now', I get the message "trying to connect to server...". "but nothing happens. (Windows 7)

  When people ask me to update creative cloud and click on 'Install now', I get the message "trying to connect to server...". "but nothing happens. (Windows 7)

  Hello Hans,.

  You can uninstall Creative Cloud Desktop app and then reinstall it using the link: Download Adobe Creative Cloud apps | CC free trial Adobe .

  Let us know if it works or not.

  Thank you

  Yann Arora

• An easy way to get the IP address of a VMware Player running?

  Hey guys, need some help to get the IP address of a VMware Player running in windows & linux. An easy way? I search on google. I saw someone said how to limit the selection of the IP address, but this isn't what I want. I want to get the IP address of a VMware Player running in windows & linux. Thank you.

  Hi Badboy,

  Welcome to the forums.

  VMware Player has no IP address, but the guest inside the VM systems have not one.

  If your virtual machines based on the internal DHCP server of the player, for example if they are bridge now or NAT network, then on Windows, you should find information useful in the %ALLUSERSPROFILE%\Application Data\VMware\vmnetdhcp.leases. There is such a file on Linux.

  Good luck.

  Concerning

  Franck

• Access the interface user Web de VMware Server 2 will crash Firefox 3.5

  Hello

  Trying to access the web interface installation of VMware Server 2 running on Enterprise Linux 5 update 2 64-bit

  using Mozilla Firefox 3.5 on XP causes Firefox to crash.

  Previous Firefox 3.0.11 version was able to connect and log in successfully.

  Everything in FF 3.5 cach has been deleted before trying to access the user interface. In addition, the certificate has also been removed before.

  When you access the UI first with 3.5 ist ask to accept the certificate (identical to 3.0.11)

  This will result in a blank page is displayed.

  Closing FF 3.5 (clear cache included) and re-open it at the interface of the web UI that causes FF crash.

  I m the only one to see this problem with the new Firefox 3.5 access to VMware Server 2 Web UI?

  Kind regards

  Agent of

  Although VMware-server - 2.0.1 - 156745.x86_64 has been out for a while, so I just assumed it was your version.

  Silly me

  Hope that cure your problem.