The performance of the network deletes every 60 seconds on WMP54G

Similar Questions

• Is why firefox connecting permanently so that on a web page? The wheel turns every 10 seconds or more. I reinstalled firefox, so I need help.

  Firefox is always 'connection' while I'm on the web. It does not matter what site I'm on, but he keeps linking (wheel rotation) every 10 seconds or more. As it is reload the page. The page does not disappear, but it drives me crazy because it did not used to do this. I have download a free trial of WordPerfect, but it was not what I was looking for and deleted. I also reinstalled Firefox, so I don't know what is happening. Help please! I have a Windows 7 Sony Vaio computer. I ran virus check a couple of times and it came out very well.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• How can I write snapshot of my data to the file measured every 5 seconds

  Hello

  I try to take a snapshot of my stream once every 5 seconds and write it to a. File LVM. I have problems with the VI "write to a measurement file. The pace at which it writes data to the file seems to be dictated by the 'Samples to Read' parameter in the DAQ assistant. I tried placing the VI 'Write in a file measure' within a business structure and the launch of the structure to deal with a "time up" VI. As a result only in a delay of 5 seconds before the insiders 'Write in a file as' VI. Once the VI 'Write in a file as' is launched, it starts writing at 20 x per second. Is there a way to change it or dictate how fast the exicutes VI 'Write in a file measure'?

  My reason for slowing down the write speed are, 1) reduce space occupied by my data file. (2) reduce the cycles of CPU use and disk access.

  The reason why I can't increase the value of 'Samples to Read' in the DAQ Assistant (to match my requirement to write data), it's that my VI will start to Miss events and triggers.

  I don't know I can't be the only person who needs high-frequency data acquisition and low-frequency writing data on the disk? However, I see a straight road to key in before that.

  The equipment I use is a NI USB DAQ 6008, data acquisition analog voltage to 100 Hz.

  Thanks in advance for your help

  See you soon

  Kim

  Dohhh!

  The re - set feature has not been put in time elapsed VI!

  Thank you very much!

  See you soon

  Kim

• Even though I have my iPad WiFi connects to the internet even after that I have reset the network settings

  Having never had a problem with my iPad since buying about 3 years ago, suddenly I can't access the internet use it & none of the applications that need the internet have access either. (since the last update for IOS 9.3) I have reset the settings of the internet and the WiFi signal at the top is visible. Airport app told me that I have access to the internet, but I did not!  Does anyone else have this problem? I would really appreciate a quick solution, because it's so annoying when things sync and I need them to-such as the events of diary, photos email etc. not to mention the SMS!  Any help gratefully received!

  General suggestions for Wi - Fi problems, maybe one of them will help you...

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

• I have a problem with IBM Lotus Symphony - the program crashing several times every 5 seconds

  Original thread - I have a problem with IBM Lotus Symphony.  I am trying to edit a document, and I can't get any task done without the program crashing several times every 5 seconds.  What can I do to fix this?

  The program crashes every 5 seconds.  I started having this problem last night, but I didn't even know that first of all, there was a problem until today.

  Hello
   
  
  You receive an error message/code when you edit a document in IBM Lotus Symphony?
   
  
  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.
  Note: when you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.
  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.
  If the problem persists please contact the IBM Lotus Symphony support for assistance. See the link below.
  http://www-03.IBM.com/software/Lotus/Symphony/ForumnsHome.nsf/home
   
  It will be useful.

• get the circular rotation "dots" (and freezing) every few seconds.

  WHEN YOU LOOK AT A SEQUENCE ON U-TUBE (FOR EXAMPLE), THE PROGRAM BREAKS EVERY FEW SECONDS AND THE CIRCULAR SPINNNING "DOTS" APPEARS.

  Hello

  If I understand any video file needs to view must first release all what is common on most of the computer or laptop until you have very high speed internet the watercourses will be lower. Maybe you can try to install different browser as Firefix & Chorme and do check out as well.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• Automated connection of the network card in the computer asked after that prompted Boote

  Hi Al,.

  I'm under VMWare ESXi 4 Update 1. I use a pair of firewalls Astaro Security Gateway Computers invited in HA mode on my ESXi 4. My problem is that when the two guest computers are running in HA mode, they are fine. However, when I restart one of them with its virtual NICs defined on 'Connect to the market', it is not 'sync' upward with another. Two firewalls Astaro Security Gateway have a separate NETWORK connected between them for the SYNCHRONIZATION of HA.

  However, when I uncheck the 'Connect to light' and allow the guest to start computer and then 'connect' virtual network cards, they work fine.

  Is it possible to automate the connection of the network of machines comments adapter after, say, x seconds once they are turned on?

  You can connect the network card in 60 seconds after the start of your virtual machine with the following script PowerCLI:

  # Get the VM
  $VM = Get-VM YourVMname
  
  # Get the network adapter
  $VMNetworkAdapter = $VM | Get-NetworkAdapter
  
  # Disable "Connected" and "Connect at power on" on the network adapter
  $VMNetworkAdapter | `
    Set-NetworkAdapter -StartConnected:$False -Connected:$False -Confirm:$False
  
  # Start the VM
  Start-VM -VM $VM
  
  # Wait for 60 seconds
  Start-Sleep -Seconds 60
  
  # Enable "Connected" on the network adapter
  $VMNetworkAdapter | `
    Set-NetworkAdapter -Connected:$True -Confirm:$False
  

  Robert

• Speed limit of the network in the Virtual Machine

  I used to use a command in a VM's VMX file in VMWare Workstation 6 which allowed me to adjust the speed of the network in bits per second.  For example, I could put the speed of the network down to a modem of 28.8 or less if I wanted to.  I don't remember the VMX command to implement and I can't find my documentation, even if I know for sure, I used the feature in the past to solve the problems that occur only during slow connections (I've not used a team).  It's a manual change of the VM VMX file and it worked very well.  Anyone know which command I'm looking for?

  Maybe ethernet0.txbw.limit. Check out this link too.

  http://sanbarrow.com/VMX/VMX-network-advanced.html

• Screen refreshes every few seconds

  Computer model: HP Pavilion e040us 17

  Product: EOJ89UA #ABA

  Windows 8 (not 8.1)

  My wife left her cell open and when she came back, she was asleep.  She tried it to wake up (hit the wrong key), got frustrated and held down the power button to turn off.  She doesn't think that updates have been applied since the screen was black

  Now, once it is started, it can use one of the applications 'tiled' who do not use the desktop computer.  Once the office is open, the screen refreshes every few seconds.  The entire desktop goes blue, the desktop icons and background image disappear, and everything disappears from the system tray.  The system tray starts to rebuilds with the battery indicator, indicator of network, "speaker" icon, date & time, then all the rest of the system tray is back with the office (background image and all the icons).  In about 1 or 2 seconds, the cycle starts all over again.  I left the laptop that works thinking that something just needs to work to stand, but two hours later, it was still there.

  If I press the windows key enough times, he swaps ends up back in the tile view, and then he begins to paint it too.  The screen goes blue and then everything comes back.

  While this is the case, the only way to get the stop menu is ctrl + alt + delete.  Moving the mouse to the bottom right of the screen to bring up the menu of the settings does not work because the screen refreshes faster that you can click on the settings button.

  I restart the computer in safe mode and it didn't happen.

  I'm stumpped and really need help!

  Mark

  Hi, Mark.
  I don't know if this will help, but for me, I used system refresh to restore my laptop to factory settings (but keep my documents) and the problem seemed to go away. Partially, I think it was because I was running Classic Shell for Windows 8.0 rather my 8.1 - Although may not be the problem, refresh the laptop seemed to work!
  Bruno

• First Pro CC 7.1 playback jerky every 12 seconds

  Hello

  I have a strange problem. I'm reading 1080 p/23.976 images MXF on a timeline of format MXF 1080 p/23.976 (same), and the video stutters every 12 seconds. It manifests itself as a kind of déjà vu, where a small section of 5 images maybe seems to play twice. During the audio continues perfectly, and I perfect lip-sync overall. So I think that what is happening is that PP is falling 5 frames and then playing twice the next 5 images. Otherwise, I can't explain why it keeps Lip-Sync, and the audio plays continuously at the proper height. It's like a strange artifact of time repeating that would be a plot point in Star Trek.

  The problem is not in the video file itself - if I play again, it happens somewhere else, and he does not appear in the export. It's strictly reading.

  My system is extremely strong, Core i7, 48 GB of RAM, at least a rate 100 MB/s since the RAID. There is nothing to see on the chart of the CPU during the stuttering. I have also problems of video playback on the computer. It is only in pages.

  I tried to go to mercury CUDA vs CPU, and it makes no difference. Sometimes I play a clip in the source monitor or timeline. Happens if I am video mirroring. It happens regardless of which is the resolution of reading. Happens no matter what codec is the film. It happens with MXF, MPEG and MP4.

  More important still, the indicator dropped done frame * not * detect that it happens.

  It is certainly possible to keep uninstalling things to know if maybe something is interacting with PP in a bad way, it's very destructive on a working system, and I want to hear if someone has experienced something similar.

  Any help would be appreciated.

  Thank you

  By

  Hello

  I solved it, and I will post the solution here for someone else. This has to do with the Turbo mode on the Core i7 processor.

  I noticed that the jump happened during a period of no video on the timeline, and I saw that the playhead to literally jumped back, led me to conclude that it had nothing to do with the GPU, but that he was bound to the time base. I searched in the Adobe forums for a reading jump head-related positions and found a guy who said the Turbo mode on the Core processor i7 mess with time from first base, and the jump of the read head is a correction for it.

  Normal high performance and video mode switch is completely smooth.

  Thank God I do not go out and buy new maps video and ripped the computer and clean installs as suggested. But it's pure luck, that would have been my next step.

  Thanks, Guy!

  By

• Satellite A135-S4666 - cooling fan turns on and turns off every 20 seconds

  Hello

  I'm from the Argentina... I just bought a new Satellite A135-S4666 and I noticed that the cooling fan turns on and turns off every 20 seconds.
  It is a little annoying and it disctracts me of what I'm doing... is there a solution?

  Thank you very much.

  Hi Martin,

  This behavior is perfectly normal and nothing to worry about. If you find the noise irritating cooling fans you are likely to change their behavior by using the utility of Toshiba power where you should be able to set the cooling mode to run more quietly. I think trhe default is to allow the CPU to run at full speed, which will, of course, the fans turn every few seconds, but by reducing the speed of the CPU, the heat produced will be lower and therefore the fans will run less often.

  Kind regards

• videos start and stop every few seconds

  Why the videos load every few seconds?  I can't view a whole video without 4 or 5 second breaks every 4 or 5 seconds.

  Hello

  You can try resetting Internet Explorer as follows: be aware that this will remove bookmarks and saved passwords etc

  Open windows control panel, open Internet Options, click the Advanced tab, and then click the reset button.  Click 'Yes' or 'Ok' for all additional guests needed to complete the process.

  Once completed, open IE and click on the Adobe link yet to invite the reinstalling of the component ActiveX - once this is completed, reboot the laptop.

  Kind regards

  DP - K

  

• Out of different signal every 5 seconds and receive AIO

  I'm trying out a time code that changes every second. I want to signal to the output only every 5 seconds and not every second. To make my task even more difficult, I also simultaneously trying to conuously acquire the signal output. The signal, I'm out only lasts for about a second, which is what I want, but when I write the signal after 5 seconds, it seems that there are several signals, one after another, be displayed in data acquisition instead of only 1 signal. Help, please!

  I will attach the VI below. I will also attach the control that are associated with file.

  I currently use an NI USB-6218 with DAQmx driver and labview 14.

  If someone needs more information than what I gave, please let me know and I'll do what I can. Thank you!

  
  

• Vostro 3550 restarts automatically (loop) every 3 seconds

  Dell support,

  I have a problem with a laptop Vostro 3550.

  When I turn on the laptop, it just is not started at all but it auto resarts at the same time, every 3 seconds, the screen is black.  The food, fan button, 3 buttons and also the front power indicator will flash during this period. Its the same thing happens when it's on battery and when the power cable is connected.

  I did it while waiting for the following tests:

  1. remove the battery and the power cable and press the power button for 1 min and try to turn on.

  2 remove the battery cmos for 10 min and make the procedure #1

  3. remove the memories RAM one by one and do the #1 procedure.

  4. measure the voltage on the connector of the power adapter (it was 19.3v)

  5. measure the voltage on the power circuit inside the laptop for any potential problems with the laptop on board power connector and it was ok.

  6. I checked all disconnected Ribbon or the cable, but everything was fine.

  Everyone has ideas, what is the problem or what I am doing wrong?

  Thank you

  Eris

  Hello Eris,

  Please write to us

  When the issue started?

  Would it be possible for you to try another hard drive or the hard drive on another machine?

  What about diagnostic? Please run diagnostics from the f12 (allow) menu and let us know.

  We provide system tag #, e-mail address and your name via private message, by clicking on my name in blue and then select send a private message

  Concerning

• take a picture by program after every 5 seconds on mobile phone

  Hi, can someone please tell me how to capture an image programmatically after every 5 seconds. I can attach a photo to a video component that I added to my list of display. Now when the user presses a button the app should start collecting the snapshot data every 5 seconds.

  I DON'T want to launch the application native cameraUI, all this must be my application.

  I have the screen visible camera in my application, but how do I publish the takepicture command?

  Thank you

  Simply take one AutoForm your video object by calling it a bitmapdata.

  Follow this link:

  http://StackOverflow.com/questions/10902472/take-a-picture-of-current-image-from-webcam-in - flash-as3

  To trigger the thaking instant every 5 seconds using the Timer class.

  hope that helps

  [Confound 4 minutes at the end]