Similar Questions

• M200 & Multidock II the external display orientaion is upside in tablet mode

  With the Portege M200 and II Mutidock I wanted to log in and use an external monitor, so I could use the M200 to draw/write on Tablet mode everything glancing outside, but little matter I try in screen orientation, one of the screens is backwards is not usable.
  It's a feature announced, so I expect there's a way to guide the tablet screen a way while still getting the external monitor to display vertical position?
  Thank you

  Hello

  The resolution of this problem is actually very simple. Go to display properties. Then click on the last tab on the right, and then click Advanced. Change the settings for the "second monitor" to "extend my Windows desktop on this monitor. This should fix the problem of the display 2nd upside down. Have a great day.

• 700 Lenovo Yoga's the keyboard in tablet mode

  Hello.

  I would like to ask, is it possible to use the keyboard in tablet mode?

  I would use Yoga with an external monitor, but I read that the keyboard turns off automatically in tablet mode.

  Thanks in advance,

  Kuksss

  kuksss wrote:

  I would like to ask, is it possible to use the keyboard in tablet mode?

  I would use Yoga with an external monitor, but I read that the keyboard turns off automatically in tablet mode.

  You ask about the physical keyboard of the 700 Yoga help? In other words, you want to connect an external monitor, fold the 700 Yoga in tablet mode, place it on a desk with the keyboard facing up, and then use the keyboard/trackpad in combination with the display on the external monitor...?

  If that's what you want to do, I'm afraid that you are out of luck - keyboard/trackpad models Yoga is disabled whenever the Yoga is folded tablet, tent, or presentation mode. They only work when Yoga is used in portable mode. This is normal.

• Spectrum X 360: New spectrum X 360 does not turn the screen into tablet mode

  My spectrum is only two weeks old and works wonderfully as a standard notebook computer.

  However, I cannot get screen to turn when I select tablet mode or Flip on the stand of entertainment.

  All the research online, I can find are people who used Win 8.1 and is updated to Win 10.

  Mine came with Win 10 pre-installed.

  None of the screens settings they advise to go to exist.

  I also checked the registry and its game properly.

  Windows 10 made the anniversary update a few days in me starts to use it so I don't know WHETHER or not the rotation number was there from the beginning.

  I solved my problem re. the screen does not turn in tablet mode.

  Yesterday, I installed HP Support Assistant in the hope, he suggests a solution.

  It didn't at the time, but it made me on this forum where I see that many others had similar problems.

  Today, when I turned on my laptop I noticed that support Assistant has a list of available updates.

  the first who has updated automatically has been updated for HP Notebook System Bios (Intel processors) which, after installation and reboot I had not really noticed any difference.

  Among the list of updates has been 'Intel Integrated Sensor Solution Drivers'

  Because I couldn't find any menition of sensors in my device manager, I installed it.

  Now I have the "Lock Rotation of this view" option may be greyed out there but at least now it.

  Still no spin so I started to double check every thing once again and found that I had a new entry in the registry... Sensor

  present.

  However Enable is set to 0 instead of 1

  

  I changed the 0 to 1 and here I rotation.

  However the only question now is the Rotation options buttons are greyed out, but I still can auto rotate when I flip to the tent, entatainment or tablet mode.

  At least, that my X 360 so that its name and what I bought it for.

  Fact my research I love the lack of rotation is not a specific HP problem but a problem of Windows 10.

  If other problems persist, try to reduce your search settings to fail to win 10 to rotaate, you will see a lot more information out there.

  Thanks to everyone who tried to help me. I hope that my message will help someone else.

• My new sites pinned tab only display full-screen mode. What happened only since the update of Firefox.

  I have my best sites 'pinned' to the new tab. Since the update of Firefox do show that the first four sites (top line) and I can't drag/release those missing bookmarks.

  I have just discovered that the sites are still there but only appear when I select the mode "full screen".

  Is there a way I can restore the page to show two lines of pinned sites without being full screen mode please?

  It seems that there is a regression with 39 Firefox on the new tab page. A bug report has been filed on 4 and the triage team responded.

  I saw the same thing with the difference in mode full-screen during the test of this "change"; the 'missing' line appear in full-screen - but with the resolution of my screen, I could see two rows of tiles, the 3rd rank was not missing mode full screen.

  Overall, I think you should try the new tab extension tools and see how you like it.
  https://addons.Mozilla.org/en-us/Firefox/addon/new-tab-tools/

  I use that in a number of my Firefox profiles. Profile where I checked this problem which has been mentioned in a number of discussions of the forum over the weekend that I use rarely - I use it see how Firefox works as "installed", before making a change.

• How can I activate the Tablet mode for kindle fire

  I loaded Firefox on my Kindle fire from an FTP site and seems to work.
  Firefox site indicates that the Kindle fire uses the default mobile mode and to have a Tablet mode by default see below but nothing is there.

  You can type about: config in the address bar and use the filter to find browser.ui.layout.tablet. Select it and use the arrow buttons to change the value to 1.

  This is an unsupported configuration and may cause an unusable interface.

• Problem to make a call on the Tablet mode.

  Hi, I have the latest installed Skype (6.14.0.665) from the game store.
  On a Lenovo tablet with Android 4.4.2
  
  When the Tablet is in landscape mode, the call button doesn't seem to work.
  The screen is not damaged - it does not work right up or upside (the soft turns).
  I can very well use the call in portrait mode button.
  Also, the video call button works in landscape mode!
  I've attached screenshots to show the button of the issue.

  Can you help me?
  Thank you.

  
  

  You beat me by 6 minutes borisk3...
  
  Can confirm that this problem has corrected the non-operational call key.
  
  Mike.

• Portege M200: the screen is blank when you switch to Tablet mode

  Hello.

  Have a problem with my Portege M200 and after hours of searching for a solution, I'm still at a complete loss as to how to fix it.

  Essentially, when you attempt to switch to Tablet mode - or if I press the button cover closed 'sensor' on the far right, which is essentially the same thing: the screen goes black.

  This means that I can not in tablet mode at all.

  What happens across multiple operating systems and will happen even before that an operating system has started. Of course, I checked that when in Windows, the option "When I close the lid" is set to do nothing and I even checked for any cable setting in bios but saw nothing relevant.

  As far as I know this has only started happening since I sent it for repair with toshiba a month or two back (motherboard has been replaced I think).

  No way to control it via software or am I'm going to have to send it for repair again?

  > Like as far as I know that this has only started happening since I sent for repair with Toshiba a couple months back (motherboard has been replaced I think). Anyway to control this via software or am I'm going to have to send it for repair again?

  You description, it looks more like a hardware problem as a problem of software because this happens before an operating system has started. That's why I would exclude a software problem.

  In your case I would recommend you to contact the ASP again and explain the whole situation with your laptop.

  Good luck

• Cover for the keys in Tablet Mode

  Is there a blanket I can buy or hack something to hide the keys in tablet mode? Thank you!

  Hey there,

  I kind of solved the problem by picking up this sleeve Lenovo Yoga 500 that has stuff and port cutouts, I put the part inside keyboard when you use desktop mode - it leaves not the device fold all the way in tablet mode, but it's great for transport.

  Try to find something similar to which is here.

• Yoga 900 - no keyboard on the screen in Word in tablet mode

  I have noticed that when I have my 900 in the configuration of the pad and open Word I can't bring up the keyboard

  Comment to Moderator: New thread is created. Edited topic. A: Re: 900 Yoga has arrived! What do you think?

  shack1968 wrote:

  I have noticed that when I have my 900 in the configuration of the pad and open Word I can't bring up the keyboard

  It is a problem with Word, rather than the 900 of Yoga, I think. I see the same thing on a Surface of 3 in tablet mode. You have two options to work around this problem:

  (a) turn off "Tablet Mode" to display the icon of the keyboard on the taskbar. Touch which will bring up the keyboard on the screen. Your physical keyboard should always be disabled when the 900 Yoga is bent in the Tablet configuration.

  (b) use the Word Mobile instead of the full word. It has all the features, but at least it will bring up the keyboard on the screen automatically in tablet mode.

• Yoga 2 pro: a mouse work with the machine in tablet mode?

  just curious, a pre purchase question... will the 2 yoga works with a mouse inverted when opened and a «tablet "mode?»

  Thank you.

  Yes, its only the 'edge' mouse and keyboard which is disabled.

• How do you get the R7 to rotate 90 degrees in tablet mode screen?

  Looks like an update broke Ezel software service, and I can't get the display to rotate 90 degrees in tablet mode. I also can't see the notification screen on rotation as before services. I am slot than Win 8.1 completely up to date, with the orientation 6.3.9600.16384 device driver. I have no idea what the question...

  OK, strangest thing ever. Understand the question. The touchpad has become corrupted. I used the touchscreen keyboard Troubleshooter to solve another problem and voila! Rotation of restored Ezel. I think that Chrome is was as tactile keyboard operations from time to time, not sure. But I know that I fixed my problem. No expenditure necessary.

  A link to download the touch keyboard Troubleshooter is to prevent it from this page:
  http://Windows.Microsoft.com/en-us/Windows-8/using-touch-keyboard

• x220t - conversion to tablet mode go to the portrait

  How can I disable the portrait mode?  Since the upgrade to Windows 8, I downloaded and installed new drivers.  One of them got the job so that I can rotate the screen and convert to the tablet of orientation, but I want to go only to the landscape reversed (without having to press the button to change it).

  I've already put the 'choose the order in which your screen turns' be set to ONLY modes two landscape.  It works for the button, but any driver Lenovo supports change of screen orientation when the joint is rotated is ignoring these parameters.

  Well, this problem is solved.

  Throw "Menu contextual Tablet" Windows 8 start screen does not work.  This application has a strange problem I really did not occur in other applications.  When else it gets the focus of Windows, he kills himself.  Thus, the new start in Windows 8 lance screen this application and then restores focus on the desktop in order to make the application visible.  This causes the app to kill himself before a user can never see it!  Dear Lenovo, if you please correct it.  It's silly.  Let just the app stay on the screen until the closing like any other application.

  The work around:

  Right click on the shortcut for "Tablet Shortcut Menu", and then click 'Open file location' in the menu at the bottom of the screen.  Double-click the shortcut to the folder that is opened in Windows desktop view. You can also run the executable file directly.  For my PC, it is located in the:

  "C:\Program Files (x 86) \ThinkPad\Tablet.

  Now, to change the setting of the auto-rotation, I was looking for:

  Click settings.  Under the subheading of the Automatic Screen Rotation (which should be checked) I had to choose "secondary landscape".  Voila, no more mode switch portrait when the screen is rotated to tablet mode - it goes to the secondary landscape (180 degree rotation).

• Developer Mode error: outdated., the xxAM.xxVO1 view object contained no trace. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  Hi all

  I'm creating a Maunal search page.

  To do this, I created a view based on a custom display object.

  Page contains 2 parameters.

  If I give all settings and click the OK button.

  It gives the following error.

  Developer Mode error: outdated data

  
  

  This page contains outdated information. This error could have been caused by the use of the buttons of the browser (the browser back button, for example). If the browser navigation buttons were not used, this error may result from coding errors in the application code. Please check press the back button on the browser developer guide - view primary key object comparison section to review the main cause of this error and correct the mistakes of coding.

  
  

  Cause:
  The view BLTrinDisplayAM.ViewVO1 object did not contain any record. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  To visit, please click on the Home link at the top of the application page to return to the main menu. Next, go to this page using the app's navigation controls (menu, links and so on) rather than use the controls of the browser as rear or front.

  If I don't give any parameter and click go Button.The content of the view are displayed.

  So if I pass all parameters and click Go, then the corresponding record is displayed.

  Why, for the first time, if I give the parameter and click Go, obsolete data error is coming?

  Please help me.

  Grateful for your help!

  -Aren

  You use the object of the view for the search criteria and search results fields.

  I suggest you to remove references of VO fields of search criteria, item1 and item2.

  And in the event of the button 'Go' in the processFormRequest, get the criteria for field values entered by the user as below and run the object (ViewVO1) of the view by using these values.

  String buCode = pageContext.getParameter ("item1");

  String lsiCode = pageContext.getParameter ("item2");

  Thank you

• Problems with the Tablet mode

  I have problems with the Tablet mode when the display on a shelf. If you visit the Web site on landscape, then everything fits perfectly on the screen however if you view on portrait then it does not. How to solve this?

  You must define a new braking point and design that matches the portrait view.