Portege M200: the screen is blank when you switch to Tablet mode

Similar Questions

• Portege M200: registering does not voice when you use the handwriting recognition

  When I'm in "tablet mode" using handwriting text recognition that my Portege M200 regularly presents a message to say, he could not save the speech recognition and I have to switch off the microphone if I do not use it. I often use it to take notes of the meeting so there is always background noise. Usually, text is lost when this message appears. The message will also appear when I save.

  How to turn off the microphone while maintaining the functional handwriting recognition please?

  Just a question: what software do you use for text recognition?

• Computer is humming, fan turns on and the screen is blank when I start computer

  This problem happens every 90 days. When I took the computer to the repair shop, he had no problem with him right there.  If the computer remains stationary, the problem persists, but once it is moved in a certain way, it will start normally. Specifically, I spilled on the computer and the problem stopped.  I have a hard time to explain a problem to the repair shop when it no longer exists at the time wherever I have it get there. Is there a more permanent solution that mess up the computer?

  When I tried to turn on my computer, I get a buzzing sound, then the fan came and the screen remained blank.  I tried to restart after an hour, but it's the same, what's the problem? >

  Hello DempseyBullock,

  Sorry, you experience this problem.  The first thing I would say is contact the manufacturer of your computer.  Also, I suggest to go to the manufacturer's Web site to confirm that there is no news updates for the drivers, firmware, or BIOS updates.

  If you are unable to start your Windows XP-based computer, try the steps in the below links:

  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Thank you

  James

• Satellite U920T - the screen goes black when you drag the keyboard

  This morning, I turned on my U920T-10 days but the screen remained black.

  At first, I thought the screen was broken, but in mode 'Tablet', the screen became. Now when I slide the keyboard the screen goes black again.

  How can this problem be solved?

  Hello

  For me, it looks like a bad connection somewhere between the screen and the motherboard.
  This could be possible reason for failure to display while sliding in and out.

  I guess this can be resolved easily and I think that it is a job for a technician (authorized service provider). I recommend you contact the service technician in your country to get the laptop fixed. I hope that the warranty is still valid in order to repair for free.

  I hope that this can be corrected. I keep fingers crossed.

• Randomly, the screen is blank when the charger is connected; generally very well during the execution of a battery

  We have a Dell Inspiron 6400 laptop.  When the charger is connected the screen will become black suddenly, and you can't seem to get the screen goes again.  It does not seem to close completely because when I press the power button twice (or more?) it brings back me to the password screen.

  This only occurs when you run the battery, IE. not connected charger.  I bought a new charger thinking that was the problem, but the same thing with the new charger.

  My only thought is that it could be the battery but unwilling to spend £60 on a new if it does not solve the problem.  And also the battery OK charges when the laptop is not activated.

  Help needed please!  Thank you very much.

  Hi Tiffany - Sorry a very very late thank you for your help on this.

  I've been very busy and have therefore been put off watching it.  We have been surviving off the battery and when he runs out to paralyze the system / sleep mode and reload.  It became quite frustrating and that's why I've decided that I really need to fix this problem.

  As you the advised, I went just through the safe mode and the problem occurred again glancing at your advice it seems there must be a hardware problem.  I had originally bought a spare power outlet, and this does not work then maybe it's the battery.  As you suggested, maybe a qualified support store is the best solution now.

  Thank you once more!  I am very grateful.

• Screen goes blank when you plug an HDMI cable...

  When I connect my HDMI cable to my TV (Sony Bravia LCD), the TV does not respond to it and my computer (gateway T-1625) turns off screen. Y at - it all the parameters that I need to know before I plug in HDMI cable?

  Hi the wedges

  for vista right click on the desktop/customize/display parameters must be on option mirror and configure the size of the screen in there. or very similar if you have XP. can't give you anything more than all my vista want to do is open WMP.

  Have fun

• Is there anyway to customize the screen to "play" when you create the project responsive for Tablet and mobile?

  Hello

  I was wondering if there is an easy way to customize the screen button "play". Currently, when the project is considered on the mobile, it displays the button on the large central room with the gesture icon in the upper right. Essentially my client do not like this, and although they don't have a landing page before moving in the course, they would prefer the page to be better integrated in the style of running. Basically, I want to put this page in a title page that shows a picture of background rather than having a white background all.

  I had a glance through the preferences and settings and have failed to find anything, so I thought I'd come and ask here see if someone else has done something similar before you start messing around with the release of HTML5.

  Any ideas or solutions would be very welcome!

  Thank you

  K

  Publish fewer setting/start and end, if you deselect the AutoPlay option, you can navigate to a picture that you want to use.

• Satellite L405D-11V - freezes and the screen goes black when you watch the video

  OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.

  I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.

  However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do

  Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?

  Thank you

  Hey Buddy,

  You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
  What operating system you use on your L405D satellite?

  To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.

  In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
  If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.

  If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
  Explain your very detailed problem. I think that everything can be clarified then. :)

• on the screen buttons not working not not in tablet mode

  I have a S10 - 3T and have recently filed to windows 7 Home premium. After the upgrade in tablet mode buttons on natural for touch screen only works in landscape and not in the other 3 positions.

  We know the fix this.

  Allan

  I reinstalled Natual Touch and turn off the PC Tablet mode, everything works now.

  Thank you for your help.

  Allan

• How to avoid the screen for authentication when you call a process?

  Hello!

  I created a simple Web service in Workbench to generate a sequential ID to PDF Forms.

  It is working very well, but the shape is open a Windows application login and password security dialog box to access the Web service.

  
  There are over sixty of these forms to be used by some 4,000 employees, it will be a major problem.

  
  Question: is there a way to use the process and sending authentication information when the form is opened and avoid this dialog box entirely?

  
  Thanks a lot for the tips!
  

  Marcos

  You can disable the authentication of the web service so that the user will not be asked to enter their credentials.

  This can be done through /AdminUI-> Application & Services-> service management-> your WebService-> Security-> appellant require to authenticate = no

  Nith

• Whats with the screen pink flashing when you cancelled your Rhapsody account?

  I loaded all my songs from rhapsody, and I cancelled my subscription after about 4 months. now I have the "synchronize to continue your music subscription". I saw this request in another post, but this person got his songs of his own cd. all the answers?  Thank you.

  You can try to remove all references to Rhapsody (folders, etc.). To access these files, you will need to move your player in MSC mode. The Rhapsody will be in the Services folder.

• Toshiba l.335 laptop screen goes black when you switch application - execute a file say yes or no to change requests

  I have a Toshiba L355 vista sp2 running Norton 360, when I want to run a file to install or make changes to something my screen temporarily becomes darker when the trunk opens to allow actions, then goes black after that I have accept or decline and goes back to normal when it is time to complete the application as a finishing facility. It wasn't a problem before installing sp2

  Might want to check for an update for your video driver...

• Warning when you switch to design mode

  Hello everyone,

  whenever I double-click a mxml, I get a warning inside Flash Builder 4.0.1 with Extension Builder 1.0.2 installed. The warning appears on the tab of problem and is more particularly related to "Design Mode".

  This is the message I get: "Design mode: cannot load csaw_indesign.swc...» ' or ' Design mode: cannot load apedelta_swc. I had a look at this log Eclipse (Flash builder) and got this:

  ! ENTRY com.adobe.flexbuilder.designview 4 1 2011 - 01 - 23 23:08:10.663

  ! Create MESSAGE mode: cannot load library.swf from/Applications/Adobe Flash Builder 4/plugins/com.adobe.cside.libsinstaller_1.0.2.201008271028/archive/csar-1.0/release/CSXSL library - 2.0 - sdk-3, 4 - public.swc, reason = ERROR: load verify

  ! ENTRY com.adobe.flexbuilder.designview 4 1 2011 - 01 - 23 23:08:11.211

  ! Create MESSAGE mode: cannot load 4/plugins/com.adobe.cside.libsinstaller_1.0.2.201008271028/archive/cslibs-1.0/3.4/release/Applications/Adobe csaw_illustrator.swc library.swf Flash Builder, reason = ERROR: load verify

  ! ENTRY com.adobe.flexbuilder.designview 4 1 2011 - 01 - 23 23:08:11.751

  ! Create MESSAGE mode: cannot load 4/plugins/com.adobe.cside.libsinstaller_1.0.2.201008271028/archive/cslibs-1.0/3.4/release/Applications/Adobe csaw_incopy.swc library.swf Flash Builder, reason = ERROR: load verify

  ! ENTRY com.adobe.flexbuilder.designview 4 1 2011 - 01 - 23 23:08:12.291

  ! Create MESSAGE mode: cannot load 4/plugins/com.adobe.cside.libsinstaller_1.0.2.201008271028/archive/cslibs-1.0/3.4/release/Applications/Adobe csaw_indesign.swc library.swf Flash Builder, reason = ERROR: load verify

  ! ENTRY com.adobe.flexbuilder.designview 4 1 2011 - 01 - 23 23:08:12.876

  ! Create MESSAGE mode: cannot load 4/plugins/com.adobe.cside.libsinstaller_1.0.2.201008271028/archive/cslibs-1.0/3.4/release/Applications/Adobe csaw_photoshop.swc library.swf Flash Builder, reason = ERROR: load verify

  ! ENTRY com.adobe.flexbuilder.designview 4 1 2011 - 01 - 23 23:08:13.416

  ! Create MESSAGE mode: cannot load 4/plugins/com.adobe.cside.libsinstaller_1.0.2.201008271028/archive/cslibs-1.0/3.4/release/Applications/Adobe apedelta.swc library.swf Flash Builder, reason = ERROR: load verify

  Is that normal or something I have to take care of?
  Best,
  Luca

  It is a known problem with the tooling and isn't something you need to worry. There is a bug filed against Flash Builder on this: https://bugs.adobe.com/jira/browse/FB-24178

• Re: Satellite A135-S2276 - does not start, the screen is blank

  I have a Toshiba Satellite A135-S2276, I bought 2 years ago. It worked fine except the clock which has never kept the exact time since I bought it. I turned it off Sunday night as I do regularly. But he could not turn it on Monday afternoon. The power light is not on when you turn it on, but primer. The light remains on but does nothing. The screen is blank when feeding it works.

  Can someone help me with the answer? Thank you

  Dennis

  It's hard to say what is happening to your knees. You can access Bios? Try to connect the external monitor and see (maybe the screen of the laptop disappeared)...

• screen goes black when you use windows live mail

  In the last week or two, the screen goes black when you use windows live mail. I use windows vista home and I suspect it has something to do with some windows updates, I installed recently. How can I find and fix the problem? Thank you

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/