the power led stops working...

Similar Questions

• Portege R100 stoped working - the power LED flashes error codes

  I have a R100 that has suddenly stopped working.
  The power led (clear amber with the image of the power wire) flashes what appears to be an error code of 5 flashes with a long pause on the last flash, followed by 3 flashes.

  That - what it means, and where can I get a list of all codes error?

  I changed the main battery, changed the spare battery and changed supply - and again, I get the error permanently. I was not able to power the laptop at all since it started. When you press the power button / nothing happens.

  I hope someone on this forum has some information that may help you diagnose this problem. Tech support representatives Toshiba post here?

  Thanks in advance.

  Hello

  I m not a R100 owner but to me it looks like a card mother malfunction because you have already tried to exchange the battery and the AC adapter.

  In this case, the best solution would be if you go to an authorized service provider. Technicians can consult the specifications and they know what means this code I think.
  Here it s only a user to user forum and I have never seen anyone from Toshiba again.

  Anyway, here you can search for the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good luck!

• Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Ask an authorized service provider regarding iPhones, a guarantee of a country may or may not be honored in another function where you take the device.

  (143868)

• Internet Explore has stopped working, and a message saying that a problem led the program to stop working correctly. Windows willclose the program and notify you if a solution is available is appear

  Internet Explore has stopped working, and a message saying that a problem led the program to stop working correctly. Windows willclose the program and notify you if a solution is available is appear

  On the desktop, you can open the Action Center under the taskbar > maintenance > view reliability history > view all reported issues

  You can right click on some of the mistakes "Stopped working" "Internet Explorer" > view technical details

  What are the details of the errors?

  There is a 'Copy to Clipboard' link at the bottom.

  Paste the information first in Notepad and then copy the Notepad information to post here.

• power led on the rear of the computer the power button / stop turns on, then turns off.

  I have a HP TouchSmart 610-1015xt.  The light on the transformer power is on, but not exactly brilliant (I think it's good, but not sure).  The light next to the power input is on.  When I plug in the power, the power led lights up for a couple / few seconds then turns off and does not turn.  At no time the computer capable of running and it does no whether noise (no fans, no beeps, no attempt to start.

  Any suggestions?

  Figured it out.  Apparently I have reset the battery internal and then unplugged the power button circuit and then he started upward.  The only problem is that now it will restart automatically every time it is closed or even sleep.  I'll start another forum on this issue.

  Thank you for your help.

• Qosmio X 500 does not start and the power LED is flashing every 5 seconds

  Hello
  I need help my X 500 does not start now. I tried to launch the NB as usual and suddenly the X 500 start or even power up.

  If I press the power button / stop it makes no noise, the power LED on the button and the second power LED just bliks once and turns on and keep blinking every 5 seconds.

  I tried to:
  * Remove battery and power up with AC only
  * power only to batteries
  * remove the battery power button hold for 30 seconds and over power with AC, battery only athen

  but it did not help.

  I checked the LEDs AC & battery, but they do not blink, they are just RED, so there is no problem in battery or AC.

  No idea where could be the problem?

  Thanks for help
  Frantisek

  Hello

  The failure of RAM could be the reason for this behavior of the laptop.
  Remove the RAM modules with good modules tested and check the functionality of the laptop.
  In the case of RAM isn t the troublemaker, the motherboard could be affected.

  Good luck and share your experience with us.

• The Magic Trackpad stopped working properly after the upgrade

  Hello. I tried to solve a problem with my magic trackpad for two weeks now, and I'm running out of ideas, so I thought I'd see if anyone has any. I have a Macbook Pro 2011 who bought second-hand, and the trackpad has never worked properly in this respect, he was always nervous. Fortunately, I wanted to use my magic trackpad with her anyway and have done so since then. I had problems over the years where he selects or done some weird things, but I just had to press the power button / stop, then esc to get back to work. However, now, I have a serious question that I can't solve since I've upgraded to the latest version of El Capitan.

  Now the magic trackpad and the laptop trackpad work very well at the start, but when my Mac wakes up from sleep, I can no longer tap or 'left click' on the magic trackpad, or the built-in trackpad. I can't select the programs or click on anything whatsoever. The only way to get my mac works again is to switch off the magic trackpad, and that integrated then starts working again. I can't simply turn the other back a new if, it does the same thing again until I turn it off.

  I tried the following and had no change:

  -Removal of all bluetooth devices and add the trackpad again

  -Deleting files plist bluetooth

  -Reset the SMC

  -Reset the PRAM

  -Turn off bluetooth devices in addition to the macbook

  -Disconnect the magsafe adapter

  Someone at - it any other suggestions?

  Thanks in advance

  Hello scarlette,.

  Thank you for using communities of Apple Support.

  I see that your Magic Trackpad is upward. The following article provides the steps necessary to resolve the devices wireless on your Mac.

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected

  Best regards.

• 3 peripheral USB connected to the Macbook 4.1 computer tells me to restart using the power button / stop?

  I went to record a live concert, and I need to use a single interface to record the members of the group with microphones near directly to a computer and another interface running for my model of Macbook 4.1 end of 2007, to get signals from the map of the House.

  When I plug my converter USB 3.0 AD / DA in my Macbook 4,1 - the computer sends immediately a window indicating to me to "reboot" the computer using the power button / stop. Ideas or comments about why this happens?

  I read on this forum that USB ports should work with retroactive effect, or accept USB 3.0 devices, but just use a speed 2.0?

  Thank you.

  It could be that it is a requirement of your converter AD / DA she needs to be present at a properly accessible to the OS X when startup sequence it is plugged into a USB2 port.

  Its also interesting to note that, well that peripheral USB3 can be plugged into the USB2 ports... it could be that your device may not work properly unless it is used with a port USB3... for reasons of bandwidth or even certain types of power supply.

  But to be sure...

  Which converter AD / DA are you using?

• (Model: D6000 ac750) Only the Power LED comes on after start

  Hello

  When I turn on my router, only the power LED comes on, no other LED lights. Ive been waiting for awhile as well, switching router on and outside, from time to time but its still the same result, only power LED lights

  I think this happened because of the failure of an attempt to upgrade my modem firmware, which I clicked on another tab, stop the download. After that, the modem turned off and only the power LED came on when I switched it back on

  any help would be apperciated, thank you

  NotGTAV

  I would say that the modem can be bricked you wish to contact Netgear phone support if it is still under warranty.

  http://support.NETGEAR.com/general/contact/default.aspx

  DarrenM

• Use high CPU (35% average) while System Idle process CPU about 98% but frustrated by "[name of the prog] has stopped working".

  Hello

  I am trying to help someone with a laptop HP model g6-1202sa (Windows 7 Home Premium 64 - bit, another record at the end of the post).

  I think that Windows is now updated and drivers, but the problem remains also.

  The laptop has the symptoms mentioned in the title I found the Manager tasks.  Laptop fan is on a large part of the time, and the owner says that, during the execution of something more intensive than Skype for example of internet browsing, they get a warning from Norton on high CPU. Resource monitor shows that system interrupts are on average about 31% CPU.

  The results, I found the task manager has led to some research on Google, which in turn led me to want to run adksetup.exe (Windows Assessment and Deployment Kit) in the hope of discovering if a particular driver is causing the problem. (Various threads on the internet point to what is the way to go).

  However, after downloading adksetup.exe, when I try to launch it I get the initial screen of Toolbox and then 'assessment of Windows and the deployment for Windows 8.1 Kit has stopped working ". (Verification of the solution finally gives the only option to "Close the program").  Similarly, I have now discovered that if I try to look at the properties of the computer, i.e. start > right click on computer > left click on properties, I get "Windows Explorer has stopped working". Do more research on Google I find sometimes I get "Internet Explorer has stopped working" sometimes (Chrome is ok).  More out of curiosity than anything specific I ran AMD VISION Engine Control Center after right click on the desktop and ended with 'Catalyst Control Center; The host Application has stopped working".

  So before going any further, does anyone have any ideas what's happening?   I do not understand the problems 'has stopped working"in safe mode, but the high utilization of the processor with System Idle Process around 98% is still there.  It appears so that I can run adksetup.exe in safe mode while this would be the way to proceed and continue to try to tackle the problem of CPU?

  For the record, some of the things I've done along the way include update of Windows, updating drivers, running the file system (no violation of integrity) checker, a regular chkdsk ("CHKDSK discovered free space marked allocated in the master file table (MFT) bitmap. Correcting errors in the volume bitmap. Windows has made corrections to the file system").  Swapped the only module memory 4GB 2 x 1 GB modules I had to hang out, all the symptoms remained 4 GB then reinstalled.

  Thanks for the tips

  HP g6-1202sa Windows 7 Home Premium 64-bit

  4 GB of ram

  AMD A4 - 3300M APU with graphics Radeon (TM) HD 1900 MHz

  523 GB of free disk space

  WE

  Since the observer event logs, these are some of the problems

  Software connection of 1 hp mgr is damaged and needs to be installed.  There are literally hundreds (or even thousands of these errors)

  Cannot find the description for the ID of the event source hpCMSrv 5. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  The failing application name: hpConnectionManager.exe, version: 4.1.23.1, time stamp: 0x4df7dbef

  2 - the description for event ID 0 in source AdvancedSystemCareService8 is not found. Remove

  3 - Media center is corrupt (updated)

  The description for event ID 0 in source MCUpdate is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted.

  Workouts 4 - sky are corupt

  Session "SkyDriveSessionName" was able to start with the following error: 0xC0000022

  5 - the description for the ID of the event source BtFilter 26 is not found

  6 - hundreds of Cvhsvc.exe is a part of the virtualization Client Microsoft Microsoft Office Service... Errors

  The description for event ID 100 from source CVHSVC is not found.

  7. the description of event ID 3057 source client Application Virtualization Client cannot be found.

  As you can see there are at least a dozen of them which are probably related to the high utilization of the processor.

  The drivers are not updated (Bet you checked in the Manager device or with a sweeper driver as app)

  To be honest I don't see how SFC returned no breach of integrity account required to this type of problems.

  It might just be easier to re - install win 7, but I'm happy to help anyway

• Two small buttons on the side of the switch just stop working - Tecra M5

  I had this problem before too many and I was told that the way to resolve the issue was a recovery CD, which means losing all my DATA and blabla... The problem is that the two very small buttons on the side of the switch just stop working.

  Just as that. They are always connected as when the laptop is on in standby or hibernation mode if you click on them it restart the machine. We tried something with Toshiba technician before and also their repair without success Center (change the purpose of the button, reinstall the program etc...) The only remedy was still a lot of recovery CD and a replacement of the machine, thank you for that. The sentence is still started. It could be a problem as cookies, just a wild guess or anything else.

  Now, nobody knows how to solve this problem, or had the same problem?
  Thank you. Olivier

  You talk about the presentation of Toshiba and Toshiba Assist buttons. Am I wrong?
  It seems that there might be corrupted registry keys or the common modules stopped working.
  Why? I put t know but perhaps I got a solution
  Try reinstalling the common modules.
  First remove it from the Add & Remove programs. Then restart the laptop and install the downloaded again common modules.

• Why the widget of the film has stopped working?

  Why the widget of the film has stopped working in Dashlane on iMac?

  I'm on OS X 10.11.3, and I have set my movies Widget by following these steps:

  1. Open a terminal
  2. CD /Library/Widgets/Movies.wdgt/ (go to the directory of movies widget)
  3. sudo cp Movies.js Movies.js.bak (create a backup of the original file)
  4. sudo vim Movies.js (change the file)
  5. Find the line 40 (var gCurrPostalCode = null)
  6. Replace null with "YOUR_ZIP_CODE" (with quotes)
  7. Save and close the file (: wq)
  8. Log off then back on

• Equium P200 - recently the webcam has stopped working

  I have an Equium P200 under Vista 32 bit-
  Recently the web cam stopped working so I tried to reinstall the driver.
  I downloaded the driver from Toshiba but it wouldn't install properly, it appears as an unknown device in Device Manager.

  I have done some research and there may be a compatibility problem with Vista.

  Someone eles has the same problem or can help you?

  Hello

  What webcam do you mean?
  Do you mean the webcam Chicony internal or 3rd party external webcam?

  The internal Chicony webcam is fully compatible with the Vista operating system and the software/driver should install correctly!

  Try to clean the OS using CCLeaner after you remove the software for the webcam of the system.
  After the new reboot, download Chicony webcam software again from the page of European driver of Toshiba and try to install it again.

• DeskJet F2430: Printing from the Internet has stopped working

  My printer worked for several years until now.  I have a Deskjet F2430 all-in-one. When I search for updates, it says that the driver, etc are up to date.  I still can not print a document on the computer, but cannot print anything on the web. A block appears generally who says that the error is unknown, but the script on the page has stopped working (not sure of the wording).

  aurielle

  You are welcome.

  Solutions come in different flavors.

  While Firefox is my own browser of choice for several reasons, I understand that everyone wants change browsers just to print a document.  The smile.  On the other hand, I find myself using Internet Explorer on occasion when Firefox is stubborn on a particular issue - sometimes just adapt to the situation.

  There should be a permanent solution for IE - can - be another Expert or someone else will chime.

  If I find something useful, I'll post.

  Good impression!

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Click on accept as Solution when the answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• I get the message "app Incredimail has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution.

  When I try to open Incredimail I get the message "Incredimail application has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution ', I have used as my e-mail for several years and never had a problem before Incredimail client.  I have gmail for my email.  You are able to help with this problem?  Thank you, June Fleischmann - my email address is * address email is removed from the privacy *

  I suggest to see if there are updates or new versions available for IncrediMail.

  If still no luck, I suggest to ask the support of IncrediMail

  I hope this helps.

  See you soon,.

  J