Photosmart Plus B210a print or copy black

Similar Questions

• HP Photosmart Plus B210a printing problem

  I recently bought a HP Photsmart Plus all-in-One Printer B210a and find that I can't customize the size of the paper or the envelope as I could with my Photosmart C4480 printer of old.  This seems silly to me.  In addition, I can't find a helpline for this device.  Would be grateful at least this last!

  Hi jhgodfrey,

  If you live in the United States / Canada, you can call our technical support at the following number 800-474-6836. If you are outside the United States, click on the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• I just bought a Photosmart Plus B210a printer/scanner

  How to print on both sides of the page with my printer B210a?

  I tried with limited success.

  I print the odd pages, turn the printed around pages and put them in the feeder, then print the even pages.

  This translates into OK printing pages, but pages are in reverse order! for example, page 64 ends on the back of page 1.

  I need to reinstall the odd pages before you put back them in the charger?

  It's OK... I found the answer my self experimenting.

  The solution was to click on "Reverse the Pages" when you print the even pages.

• HP Photosmart Plus - B210a printing problems

  My photo printer prints now all my photos in red.  First of all, this occurred when the ink cartridges were low.  I replaced the time and the Red pictures disappeared.  When photos started printing in red, I have replaced all cartridges with HP ink cartridges and made sure all cartridges have not all the bands on them to restrict the flow of ink, but still to print photos in red.  I also cleaned and aligned printheads several times but the problem persists.  By tools, my ink levels is now up to 50 percent of the Red photo printing.  I use photo paper bought at Costco, which is the same paper used when the images did print correctly.

  What should I do for the photo printer to get the pictures to print correctly?

  I don't know exactly of what has caused the problem, but I have speculations. It is possible that the ink pipes have stamps, air preventing the ink being subject to a push of the ink cartridge for the print heads. That's why it took 2-3 printheads clean processes to get the ink out. Another possibility is that the print nozzles are blocked and the print head cleaning process after several tests. Regarding prevention, the only thing that I could think off is to make sure to use the power button when you want to turn off the printer. This is to ensure that the print heads is capped correctly to avoid the obstruction. So basically when you get the power failure, be sure to turn on the printer as soon as you get back power. Run a clean print head immediately.

• Photosmart Plus B210a will not print on the Windows XP computer, but works on the Windows 7 computer

  I just got a Photosmart Plus B210a printer. I was able to install it using the wireless for my Dell Dimension 3000 3 GHz computer with Windows XP 32-bit SP3. He will answer analysis, but it will NOT print, it doesn't matter what I do. I have a Netgear wireless router. I tried the Dell connected directly to the router using a USB of Netgear WG111v3 USB adapter and cable. No impression whatever the configuration.

  On the other hand, I was able to make the printer work with an Athlon II X 4 630 with Windows 7 Professional 64 bit AMD machine. Everything works independently to know if the machine is connected directly to the router Netgear or using the above USB adapter.

  How can I make work B210a with my Dell with Windows XP? Is this a problem XP because Windows 7 has worked perfectly, but Windows XP would only scan.

  Subsequently, I deleted all initially loaded B201a software. At the printer detects the network, then reloaded the software from the CD. The printer then worked fine. What a relief. Perhaps the problem I had previously was linked to my trying to use the USB port when the printer originally did not work.

• Ink system failure code... 0xc19a003... Photosmart Plus B210a... Help

  I have a HP Photosmart Plus B210a printer code

  My problem is the following: -.

  The printer screen is display the following information:-the 0xc19a003 ink system failure code. Please turn printer and then turn it on again.

  I tried several times with HP solutions. Nothing worked and I just keep getting the same results. Ink system failure... 0xc19a0003... Please turn printer and then turn it on again.

  Can anyone help me please with a solution.

  HI VTHapa,

  I appreciate your help. After trying to solve my problem with your suggestions and the HP suggestion, nothing worked. So I abandoned my printer and bought a new one.

  Now I don't know how to remove my ad?

  Scooter

• black and will not print on hp Photosmart Plus B210a of Window Vista model

  black and will not print on hp Photosmart Plus B210a of model

  The post here could help solve the problem.  Be sure to check the vents.

• HP Photosmart Plus (B210a) - part way freezes by printing

  Product name: HP Photosmart Plus (B210a)

  Operating system: Windows 7 (64-bit)

  I recently had experinece problems when you try to print. The printer starts printing the paper, freeze for a minute or two and then spit the sheet on incomplete. He will then proceed to print another sheet, outside, with black strips, running through it, either with a series of letters and symbols on the top. It seems very occasionally to print without any problem at all.

  To try to resolve the problem so far, I've updated the software of the printer, it seemed to have no effect, and I ran printing HP and doctor scan, but it can't seem to pick up all the problems. This is a wireless printer that is connected to a network, it was connected to and has worked previously.

  I hope someone can help because I'm getting very frustrated! Thank you in advance.

  Hi A0805_JKS92,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that the printer is not printing correctly.
  I'll be happy to help you.

  I turns off all startup programs to make sure there isn't something blocking the printer from printing. Click Start, in the search box type to perform, enter, and then type msconfig, click OK.

  Click the Services tab to select the hide all Microsoft Services check box. Click Disable all, and then click OK.

  Then click on the tab at the top of the start page. Click Disable all.
  Restart the computer.

  Disable any antivirus software.

  Try printing right now to see if that makes a difference.

  Then, return to msconfig and enable all the Microsoft Services and enable all Startup tab turn on the Antivirus software.

  I think that this will provide a solution to your problem. Thank you.

• Photosmart HP B210a more: HP Photosmart Plus B210a shows a blue screen with error B8145558 and restart.

  For two weeks now my HP Photosmart Plus B210a was wrong to behave. Until that time, I was a happy user, but since it says there is an error in the printer and that I should turn it works again.

  Putting out voltage is actually not possible using the button, as this will trigger a reboot, ending up on the same screen as before. During the start cycle, I have a brief moment where I can access the regular menu before it shows a blue screen with the B8145558 error code. 2 seconds after it is shown, a white screen appears with the title of printer error and the message to reboot.

  So far, I have cleaned the print head and the connections of all dirt and residues. I even managed to start and finish in a copy process, before it gives me the error. However, the error will come, and then it's over.

  Someone has encountered this problem before? Currently, I find only 1 reference to this error in Google and not on this site. Any suggestions that I could try?

  Hi @kootstra,

  From your description, I suspect there is a problem with the firmware that may be irreparable. We can try a reset, but because the printer will not stay on very long main screen until the error appears that we are not able to access the menu of support, we need to reset.

  I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• HP Photosmart C6280: my HP Photosmart C6280 ceased printing and copying. I use a Mac OS 10.10.5

  My HP Photosmart C6280 stopped printing and copying. I use a Mac OS 10.10.5. The printer seems to work, but no ink is on paper with a function.

  I installed a new black ink cartridge and select "black only" with the same results. All the other ink levels are sufficient.

  I would appreciate your help. The printer has been idle for a few days but a previous usage has been a success.

  Welcome to the Forum from HP Support. I hope you're well @Suz161!

  Thank you access the Forums from HP Support for extra support! I see that you are having problems when copying / printing. I will do my best to help you with this problem.

  It looks like a problem with the printer ink. It may have dried due to non-use. I suggest that try you to perform a print head cleaning. Try the following steps:

  • On the printer control panel, press 'Setup '.
  • Press the down arrow button to select Tools and press OK.
  • Press the down arrow button to select "Clean printhead" and press OK.
  • If the print quality is acceptable, you can stop troubleshooting.
  • If the print quality is unacceptable, perform a print head cleaning.

  You can try the steps mentioned additional troubleshooting here: http://hp.care/2dVLZUu

  Let me know how it goes. Nice day!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• HP Photosmart Plus B210a won't come out of power save mode.

  The printer works fine until it sits awhile and goes into 'power saving mode'. Nothing it comes out that mode except unplug the power cord and back running the printer. I disabled the: power saving mode and have had no problems. Is there a fix so I can turn the: energy safe mode: back on?

  I have a HP Photosmart Plus B210a and it's brand new. I am using Windows 7 32 bit and I get no error message. When I ran the HP print utility, all checked in green except when I tried to print a test page and test page remained in Quebec and a red X.

  Technical support told me that the problem was a hardware problem. They sent me a new printer!

• I have a Photosmart Plus B210a all in one. Automatic adjustment of photos.

  I have a Photosmart Plus B210a all in one Photosmart. This allows to adjust the pictures to print. How can I disable this feature?

  To disable management of the image when you print, you will need access to printing preferences Advanced Options.

  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. select print options.
  5. click on the Advanced button.
  6. change the on off ICM ICM method.

  Let me know what happens.

• problems with the HP Photosmart Plus b210a Wireless

  Good evening. I have some problems with the HP Photosmart Plus b210a. Precisely after printing when the printer is not detected on the network and is defined as "not available". The works remain in the queue and the printer is turned on and on again unable to work in print queue.
  The printer on the network report says "Success" for each element

  It is the same for the iPhone 4 and iPad 2

  The system is composed of:

  MacBook Pro 13 "with OSX 10.6 update now
  Connected to the Internet router Wavewgate Digicom3G150 with key
  HP Photosmart B210 Pro Aio series with ultimate drivers Apple

  Network:
  D4 HW (MAC) address: 85...
  192 168 123 102 (non-static) IP address
  DHCP configuration
  Authentication: WPA - PSK
  Encryption: Auto (AES / TKIP)

  The same system also use a PC with Windows Seven Home, but in this case, the printer works PERFECTLY! Even with the iPhone and iPad!

  Thank you for the help that you can give me

  OK, I will assume that the connection of the printer to the router and the router are OK for 3 other devices work correctly.

  Make sure that your OS X is healthy:

  1. download and install OS X Combo Update.
  2. download and install the printer drivers HP from Apple.

  After that, you can reset the printing system once more.

• Photosmart Plus B210a ink level by computer will not work

  I have Photosmart Plus B210a. Running Windows 7.  The function to determine the level of ink by computer suddenly won't work.  The option will not even appear in the devices & printers screen.   I install only the HP cartridges.

  It is possible, it was lost if you did an update of the Hp software. To get the option on your computer, you can download the latest drivers. Don't forget to uninstall and re install with updated drivers. When pilots selection select features complete drivers.

  Updated drivers

• HP Photosmart Plus B210A black ink cartridge will not print

  I have an HP B210A Photosmart printer. Windows 8 operating system.  Recently, I replaced all ink cartridges, Black XL.

  Now the black does not print.  The printer recognizes the ink is there but not print during a test, as the other three colors.  I went back to store & exchanged the cartridge for me even if I had bought all four colors together.  Installed the new one and it still does not work.  Has gone through the process of the online help where they want me to buy an another print head, but that doesn't make sense to me.  The products are HP, ink # 564.

  I wouldn't get rid of this product because of it.  Any help would be appreciated.

  Of course, out of warranty.

  Hi PaulieG,

  I understand that you have a Photosmart B210a printer that is printing is no longer black. I'm sorry to hear you had to deal with this, but I will certainly do my best to help you with this problem.

  I recommend you all first that you have a look at this print quality paper to ensure that no steps have been omitted in this document. You can also try the steps outlined in this document 'Print head problem' or "Print head seems to be missing or corrupt" Message appears on the computer to clean your print head manually. Then, in a last effort, if these steps do not help, you can also try a suggestion from Bob_Headrick to soak your printhead.

  Hope this helps, have a nice day!