the printer 7520e claim code

Similar Questions

• network print: cannot install the printer 0x0000046a error code

  can see printer on the computer XP Home and get where Vista connect to the printer receives the error message "cannot perform complete error 0x0000046a.

  solved my problem: as much as I tried to blame Vista it turns out be a XP problem [computers XP is sharing the printer and Vista use this printer on a network connection. [Q177078 a google search] to microsoft site created IRPStackSize as non-existed in 'settings' then the value of IRPStackSize > 15.

  RESOLUTION:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  To resolve this behavior, increase the IRPStackSize value in the registry:

  1. click on Startand then click run.

  2. type regeditand then click OK.

  3. navigate to the following key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanmanServer\Parameters

  4. in the right pane, double-click the IRPStackSize value.

  NOTE: If the IRPStackSize value does not already exist, use the following procedure to create it:

  1. in the folder registry settings, click on the right pane.

  2. point to new and then click DWord value.

  3. Type IRPStackSize.

  IMPORTANT: Type "IRPStackSize" exactly as it is displayed because the value name is case-sensitive.

  5. [double click IRPStackSize] change the decimal number Base.

  6. in the value data box, type a value that is greater than the value that is listed. [default below]

  If you created the IRPStackSize value using the procedure described in step 4, the default value is 15. It is recommended that you increase the value of 3. [if the previous value was 11, type 14]

  7. close the registry editor.

  8 restart the computer.

  If the problem persists after you complete the previous procedure, try to increase the value of IRPStackSize even more. The maximum value for Windows 2000 is 50 (hex 0 x 32).

  If you are running Windows NT 4.0 and the problem persists after you complete the previous procedure, you may need to apply Windows NT Service Pack 4 or Service Pack 5.

  In Windows NT 4.0, the default value of IRPStackSize is 0x4, and the range is fr...

  In Windows NT 4.0, the default value of IRPStackSize is 0x4, and the range is from 0 x 0xC (4-12) 4. Windows NT 4.0 with Service Pack 5 or later ignores values less than 0x7.

  In Windows 2000, the default value of IRPStackSize is 15 and the range is from 11 to 50. In Windows XP, the default of IRPStackSize is 15 and the range is from 11 to 50

• The print spooler failed, code 7034"the print spooler service over unexpectedly. disk error

  Hi all, I had a cluster of disc go bad in the middle of localspl.dll

  I tried a lot of things, but first a little recap of my system and the problem.

  Win 7 Ultimate, OEM, 64-bit.

  No new printer last week.  Impression was working fine last night.  This morning - print spooler does not work and system clearly having a problem.  A ran a ScanDisk with sector scan and repair verified time options.  Has detected an error in the middle of the above file.  Since then, I tried everything I can think of and some things I found on the internet.

  I tried:

  Localspl.dll (via another system) in place of the copy of winsxs (found via search).  The same version and size.  There is no dllcache and if there is a similar animal on Win 7, I don't know about it.

  Before that, I tried SFC/scannow

  I dumpped everything spooler.

  I tried the fix - sound, but I can't seem to find one that works on Win 7, 64 bit.

  This utility doesn't help - can not even say the service failed in the middle of its operation.

  I hate the idea that I'll have to reinstall scratch.

  I can not yet do a upgrade in place due to the inability of stupid (shame of Microsoft) to do a upgrade in place of an OEM drive.  Come on, that disc might check to see if it was the same version and do - the code already exists - argh!

  I need some ideas please,

  -greg

  Hi, we can close this.

  I dropped.  Nothing works and I need my system back.

  So, I backed the re - install from scratch.

  -greg

• LaserJet M1213nf MFP: Printer does not print the claim code more

  I use a chromebook, so I use my printer as a Google Cloudprinter. Usually, I'm able to get my printer using claim code that is printed in the Backgrounder (this information sheet is printer when I activate HP Webservices on the printer).

  For some reason, I seem to be impossible to activate the Web services successfully. I have a guest that webservices are enabled, but who is supposed to have printed information sheet no longer get printed. So, I don't know what is my claim code, and accordingly I seem not to be able to print more Google Cloudprint.

  I can connect to the site HPConnected, I can't add a printer because I don't know the claim code.

  Can you please let me know what I might hurt? How can I get the claim code?

  Thank you

  KNK

  Hello and welcome to the HP support community!

  Is your ChromeBook and printer using the same wireless network?  If so, have you tried to install the "HP Print application" of the Chrome Web store?

  Please see the document which contains the instructions for use of HP on a Chromebook print.

  http://support.HP.com/us-en/document/c04683559

  Here is the HP article on "How to get the claim code".

  WyreNut

• I can't find the code for the printer on my printer all-in-one HP deskjet 3050 J610

  I disconnected wireless and the printer is off and turned on and connected re.  I changed the DNS to 8888 and secondary to 8844.  I printed 5 pages of network configuration and 4 reports of State printer and NOTHING to the printer on that code. How can I get a?  Thanx, Anna

  Hi Anna,.

  I'm afraid that the Deskjet 3050 J610-does not support a web service ePrint or Print Apps.

  Only the ePrint to support Deskjet 3050has (J611) as you can find below:

  http://support.HP.com/us-en/document/c03722645

  Kind regards

  Shlomi

• OfficeJet HP6500A more: can't stop e-Print to get the claim Code

  HP support says "disable e-print and deliver on the clain code obtaion" I can't disable e-print! When I try I get a message saying 'the printer could not connect to server' error 'you can connect the printer to a proxy through the internet' "to do so enter the proxy server and enter the details when you are prompted" MY QUESTION: WHAT PROXY SERVER? Where can I find the so-called proxy server. I can not turn off the e-print without mysterious proxy server. Nobody at HP Support knows, they want to come on my computer. HOW THAT WILL HELP, IF I HAVE TO GO IN THROUGH THE PRINTER? I'm not let someone remote my computer! I've done it before and all they do is look around where they don't belong, then tell me "I have a friend who can fix it for $200.00" BS! I just want to know how to get the claim code so I can use e-print. This may not be such a mystery that emit a person cannot tell me by phone or e-mail, how can I recover the claim code. OR, where I can find this mysterious Proxy Server turns off e-print, so I can turn it on the recovery of the claim code.  PLEASE DO NOT SEND ME LINKS OF WHERE ALL THE ANSWER OF WHAT IS CALLED, IT IS HERE, I HAVE ALREADY DID NOT RESEARCH DAYS, JUST GIVE ME ANSWERS TO MY QUESTION *.

  WHAT PROXY SERVER? Where can I find this so-called proxy server!

  Hello

  First download and install the latest firmware below, then check for the difference:

  http://ftp.HP.com/pub/softlib/software13/Printers/oj6500/OJ6500_E710n-z_R1621A.exe

  Once the latest firmware has been installed check for the difference once the HP ePrint menu.

  If the same error persists, press the right arrow and press Setup, then Web Services configuration tab.

  Tap on delete Web Services and follow the steps to the web services of devil.

  Then enter the menu of Web Services again and follow the instructions on the screen to reactivate the service and check for the difference.

• HP Deskjet 2549: I pressed the icon e-print web on my HP Deskjet 2549, but I can't get the claim code. Help!

  Same as above... I can't find my code request... where should I go? On my phone, where? No idea at all. Please help me ASAP!

  Hello

  There is no claim code for this printer. The claim codes are used to set up ePrint (the ability to send content to your printer) and web services are needed for this - your printer is not active ePrint.

  You can however print wirlessly from your mobile phone using the instructios I've included below:

  The simplest is to print wireless from your mobile device to download the HP eprint app and make sure that your printer and devices are connected to the same network wifi - once the operation is finished, you will be bale to print wireless from the eprint app.
  
  You can also use direct funtion wireless to your printer by turining on the button on the front of the printer wireless. This allows to generate the printer it's own singal wifi that you can connect through any wireless device. To find the wireless password, simply hold the direct wireless for more than 3 seconds and it will display the password on plain paper (make sure that the paper is loaded).

  Let me know if you have problems with the installation.

• HP PHOTOSMART 7520E: CLAIM OF PRINTER CODE

  I'm about to get rid of my HP printer 7520 and buying another brand.  I tried for several months to connect to print E.  The instructions are NOT clear.  One of the instructions reads: "to connect to a web browser?  Just what that means.  I feel as if I bought the wrong brand of printer, and I tried for months to connect to a web browser.  Can someone give me CLEAR instructions.  Thank you.

  Hello

  I hope that I can help you.

  Include the main steps involved in the development of eprint

  1. Turning on web services on your printer (made via the control panel)
  2. Once the web services is trned on a sheet will be printed with the claim code (if the information sheet lists an email like [email protected], then the print request code is the number and the characters before @hpeprint.com. For example, abc234vbn3434 would be the claim of printer code).
  3. On the journal e-mail address is the address of your printer.
  4. The claim code can be used to claim your printer via the HPConnected Web site (your connected HP account is the place where your access yoru history of printing etc..) You can also use HP connected to customsie email to something more staff.

  I have included a link below with relatively clear instructions on how to set up ePrint. If you have a problem with any of the steps, please let me know and we will try and work through them.

  http://support.HP.com/us-en/document/c03721293

  The link below will guide you if implementation of a connected HP printer account

  http://support.HP.com/us-en/document/c03609576

  A web browser is a program that allows you to access the internet, such as safari, internet explore and google chrome.

• HP Envy 4500: Claim Code problems. The printer is already done.

  Hello

  I am trying to add my new HP Envy 4500 to my account connected to HP, but when I enter the claim code, I get "the printer is already claimed. "In order to claim this printer, you must remove the previous owner.  Looking through the forum, it seems to be a fairly common problem.  I disabled / re-enabled web services to get a new code to claim, but it gives the same result.  I even reset the printer default and tried.  This time, connected HP indicated that it had saved my printer successfully, but when I go to the devices tab of the web page I am greeted with the message "it looks like you have not added all devices connected HP account".

  Any advice would be greatly appreciated, I'm hoping to use the instant program of HP ink, but unless I can add the printer to my account, I will not be able to.

  Thank you

  I managed to get this working afterwards by registering a new user account with HP with a different email address.  Not an ideal solution (and apparently not a rare either) but at least it works now.

• Printer Officejet 5740: can not find the claim code to register the printer Officejet 5740

  I printed the map which is supposed to have the claim number, but it's not about it, there only diagnostic results.  I can't find it on the box or the other.  This printer is going to get knocked down a star in a review to be a PITA for the program installation, but right now I need the application number if my wife and I can use it for work and college classes.

  Hey there @douglasrob!

  Thanks for posting on the HP Forums!

  EPrint is when an e-mail address is assigned to the printer.  Once this electronic address is assigned you can then send emails to the e-mail address of printers and the printer will print the email.  If the printer cannot connect to Web Services which means that eprint is not connected either.  The reason why you are able to print from the iPad is because it communicates through your network send printing to printers IP address not the Eprint address.

  When the devices are connected to the network (router) it means other devices connected to the same network may be.  Connecting to Web Services the printer attempts to access the internet through the router.  The printer is connected to the network, but something is not allowing it to connect to the internet or the Web Services server.

  One suggestion would be to change the DNS (Domain Name Servers) on the printer.  If the automatic DNS in the printer is incorrect then the printer will not be allowed access to the server of Web Services via the router.

  To change the DNS of the front of the printer, you must:

  1. Tap the settings icon.
  2. Press the Network Configuration.
  3. Press wireless settings.
  4. Scroll down, and then press advanced settings.
  5. Press IP settings.
  6. Press manual (static).
  7. Press OK and ignore the message.  You do not change the IP address just the DNS.
  8. Scroll down and press DNS address.
  9. Type 008.008.008.008, and press done.
  10. Press on apply.
  11. Return to the start screen on the printer and try to activate Web Services again.

  Let me know how it goes.  If this does not work, I should be able to locate another step to try!

• Tab HP Web services to find the claim code is not found

  Hello

  I'm trying to implement HP ePrint on my printer HP Laserjet M1522nf connected to my home network. I am unable to find the claim code for my printer set up the device connected HP services.

  I entered the IP address on my web browser and entered the Printer Setup tab, but I can't find the web services tab or the printing page of information for the claim code.

  Please let me know how to find the claim code so that I could set up ePrint.

  Thank you

  Harish

  OK done judt this device is not ready for eprint.

  Please ignore my previous post.

• How can I fnd my claim code and the reprint of the web services information sheet

  Hi, I have a HP Deskjet 3520 and try to put in place the eprint.  I read the suggestions on the forum and the FAQ but I can't locate the web services information sheet I need to reprint for claim code.

  Could not find anything under Printer Control Panel either. Please advise!

  Thank you!!

  Hi Chris88,

  Welcome to the HP Support forums.  I appreciate that you try to configure the ePrint on your Deskjet 3520 printer feature.

  If you have the inkjet printer Deskjet 3520 with a C8994 product number this printer does not have the ePrint service.  The Deskjet 3520 printer only has USB connection and ePrint to function the printer must have an independent internet connection through a wireless or a wired ethernet network.  I've included the specifications of the printer for your reference.

  If you have the e-all-in-one printer Deskjet 3520 then we obtain the claim code.  You can request the information sheet of web services from the front panel of the printer, and there the claim code printed in blue. Instructions on how to get it can be found in the section titled "to print a document using ePrint' in your on page 15 user's guide.  Please follow the instructions in step 1.

  HP Deskjet 3520 inkjet printer specifications

  User's Guide e-All-in-One Series HP Deskjet 3520

• Office Jet 8610: Device appearing is not in the device tab connected hp after entering the claim code (for the second time)

  I got the claim code to register my hp device connected for the second time and on both occasions, it doesn't have to be displayed in the devices tab.

  I tried a disconnection and logging into my account, but this has not solved the problem.

  I tried the two Chrome Version 39.0.2171.95 (64-bit) and Firefox 31.0 on a MacBook Pro running Mac OS 10.9

  Printer is an Office Jet 8610

  Web services are enabled and the printer is connected to the network.  I created the computer print jobs and they have successfully completed.

  * beep *?

  The problem disappeared after I checked my email address

• HP Deskjet 3050 (J610) - can not find the claim code

  I have a HP Deskjet 3050 J610 Series. I searched the support site of HP and may not know how to configure my ePrint printers. My ePrint printer turned on?

  There is no instructions that correspond to my machine on this site:

  http://support.HP.com/us-en/document/c03550536

  I found a video on the "HP Deskjet 3050 a" but it was very different from the standard 3050. My printer is set up wireless and I am able to print from my Android smartphone, but only if I am connected to the same wireless network.

  I have the impression that with a connected HP account and my claim Code printers, I can print from my smartphone using the Google Cloud from anywhere, I have access to the internet. I can't find my printers claim anywhere Code. I can print the HP Network Configuration Page in the menu on my printers Control Panel wireless, but it looks nothing like the page in the video.

  Thank you in advance.

  Hello

  The series HP Deskjet 3050 (J610) do not support the ePrint and therefore does not claim any code.

  The printer Deskjet 3050 a Series (J611) supports such a, your printer is not.

  You can view this document as a reference, the printer does not support Web Services and only allow printing via the local network:

  http://support.HP.com/us-en/document/c02814760

  Shlomi

• DeskJet 3830: could not find the claim code

  Hello
  I have a 3830 deskjet printer.
  When I activate the web services just print the printer email address.
  (I have activated automatically updated)
  Then I removed the webservices and allowed him once again, and it keeps printing the same page with the email address!

  Please help me to get the claim code without spending a lot of ink

  Hello

  The printed e-mail is the claim Code, you should use only the part before the prefix of .com @hpeprinton the HP site connected.