"the procedure entry point SetDllDirectoryw" when you access internet, mistake after repair installation

I have WinXP Pro and this morning when I turn on the computer, I received a msg of error that a file was missing or corrupted, if I put the original disc in WindowXP Pro in the computer and it said to fix. Once this has been done it starts up fine, but when I trid to access the interernet I received the following: "the point procedure entry SetDllDirectoryw be found in KERNEL32.dll dynamic link library."

I use a wireless connection, and it shows a great connection. No service don't packs again until what I connect.

Any help?

Hello

1. how exactly you are trying to access the internet?
2. what browser do you use?

Run SFC scans the computer and check.

To run the System File Checker tool, follow these steps:

1. Click Start and type cmd in the box start the search.
2. right click on cmd in the list programs and then click Run as administrator.

If you are prompted for an administrator password or a confirmation, type your password or click on continue

3. at the command prompt, the following line, and then press ENTER:

sfc/scannow

Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

Tags: Windows

Similar Questions

  • After you install a Foxfire 5.0 update, I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

    I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

    Do a clean reinstall.

    Download a new copy of Firefox and save the file to the desktop.

    • Uninstall your current version of Firefox.
    • Do not remove the data of a personal nature when you uninstall the current version.

    Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

    • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

    Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • Error "the procedure entry point SMapLS_IP_EBP_12 be found in KERNEL32.dll dynamic link library" when you try to play Red Alert: Command & Conquer

    Original title: the procedure entry point SMapLS_IP_EBP_12 could not be found in KERNEL32.dll dynamic link library.

    Ive been trying to install Red Alert: Command and Conquer on my new pc windows 7 and of course he will not play to come with all can't play because its running windows 6.1 and it's a single program of windows 95. then I went through all troubleshooting and change everything to make sure that it works and it actually installed, but when I went to play this message appears and im like why does this happen to me!

    The procedure entry point SMapLS_IP_EBP_12 be found in KERNEL32.dll dynamic link library.

    It of the message, can someone help me?

    Hi BigAl3000,

    Please note that Command & Conquer: Red Alert 3 is the only version compatible with Windows 7.

    Red Alert 2 and red alert are not compatible with Windows 7.

    See Windows 7 compatibility for Command & Conquer: Red Alert for more information.

    To troubleshoot program compatibility issues in Windows 7, try the following methods:

     

    Method 1: Open the program compatibility problems

     

    Most programs written for Windows Vista are also running Windows 7, but some older programs might run poorly or not at all. If an older program does not work, use the program compatibility issues to simulate the behavior of earlier versions of Windows.

    Method 2: Contact the program vendor or the hardware manufacturer

     

    Contact the program vendor for advice on how to solve the problem. In general, the software vendor's Web site provides a support section that you can use, for example, to search for an error message that you receive from the program.

    Hope this information helps.

    Gokul - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Error 'the procedure entry point xmlTextReaderConstName' not found in the dynamic link library libxml2.dll when you connect to the computer

    Original title:

    I get this pop-up when I connect: 'the procedure entry point not found xmlTextReaderConstName in the dynamic link library libxml2.dll.'  What should I do to fix this?

    Hello

    1. are you able to connect next to this error?

    2. are you aware of any changes made to the computer, before the show?

    Method 1:

    Step 1: Safe Mode

    Start your computer in safe mode and check the number.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2: Clean boot

    If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: When you have finished the clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

    Method 2:

    Run a SFC system analysis and control for the issue.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 3:

    Follow these steps.

    a. open windows Explorer, navigate to the following location:

    For 64-bit.

    C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

    For 32 bit,

    C:\Program Files \Common Files\Apple\Apple Application Support

    b. copy the file "libxml2.dll.

    c. open new windows Explorer, navigate to the following location:

    For 64-bit.

    C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support

    For 32 bit,

    C:\Program Files \Common Files\Apple\Mobile Device Support

    d. Paste the file 'libxml2.dll' at the location.

    e. restart your computer.

    I hope this helps.

  • System error "the procedure entry point _SetAsyncTraceParams at (@)" 16 is not found in the library of dynamic links ATRACE. "." DLL.

    Original title: no access to system restore

    After a massive search, I can't solve this problem! Please indicate why this is happening and how to solve it.  Thank you for your support.

    This is the error message pop up that I got trying to activiate (Rstrui.exe) system restore "the procedure entry point _SetAsyncTraceParams at (@) 16 be found in ATRACE dynamic link library. DLL. notice the @ in support should replace 'at' since the seizure of this character created a link to MFL and was confusing to read!

    Hi intelegend,

    1. Did you the latest changes on the computer?
    2. You have security software installed on the computer?

    Method 1

    I suggest that scan you SFC on the computer that would be a corrupt system file search.

    The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

    Method 2

    If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you configure the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    Method 3

    If the steps above do not then refer to the article below and check if it helps.

    Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

    http://support.Microsoft.com/kb/302796

  • 'The procedure entry point DecodePointer could not be found in KERNEL32.dll dynamic link library '.

    ORIGINAL TITLE: How can I fix this please?

    I have an older version of Windows XP (Home edition) Version 5.1.  Trying to get updated with service packs, etc., I get the pop up message in the box below.  How can I fix the problem?

    'The procedure entry point DecodePointer could not be found in KERNEL32.dll dynamic link library '.

    Thank you for your help.

    The other post:

    We get an error "iexplore.exe - point of entry not found in KERNEL32.dll dynamic link library" so he was trying to use internet explore.

    In Firefox, I have automatic updates verified, but for some reason any I do not receive them.  I need all the service packs for Microsoft.

    When I try to use Internet Explorer to connect to the internet, I get a message that says "iexplore.exe - point of entry not found in KERNEL32.dll dynamic link library" How can I fix?  I get a lot of error messages related to the KERNEL32.dll dynamic link library.

    In addition, for some unknown reason, I lost my software of Microsoft - Word, Excel, etc.  I don't have the disc to recharge.

    Thanks for any help.  This kind of thing is frustrating and I really appreciate the availability of Microsoft Answers for assistance.

    Additional post:

    Im trying to update my computer with SP2 and Windows 7.  Even when I try to use I Tunes and do other things that I receive and message entry point (they vary).

    Here are a couple:
    1. the procedure for DecodePointer entry point could not be located in the line of the dynamic library KERNEL32.dll.

    2. the procedure entry point SHRRegGetValueW be found in the library of dynamic links SHLWAPI.dll.

    I have an old computer. Compaq Windows XP - Home Edition, 5.1.

    A month ago I lost my Microsoft Office software. Word and excel... it was all gone.   I have to reload the diskettes of origin provided with this computer which is about 7 years old.

    Is this thing?  I CAN go on the internet and move OK, but I can't download updates, or I Tunes or much else.

    * Original title: do not get the automatic updates.

    http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

    Tom Ferguson

  • Skype error: "Skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport...". »

    Sorry for the ridiculously long title, but that is exactly the error I get.  When I contacted my friends @ Skype that they just told me it's associated windows problem.  I thought, but the error message appear says SKYPE not Windows. Anyway, there is a certain irony in all of this that Skype is a Microsoft company. I'm absolutely furious since Skype perhaps in conjunction with Windows has developed a kind of points of failure...

    Original title: skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport could not be found in the dynamic link library.

    Please note that the thread referenced in 'Question (1)' has been marked as the answer by a moderator, and not by the person who asked the question.  It is highly unlikely that will help in the Safe Mode, starting in a start-up in minimal mode or sfc/scannow configuration. Of course, you're welcome to try these things.

    Uninstall and reinstall of Skype as suggested in "Question 2" would have been my first guess, but a bit of searching online suggests that it also assisted.  Again, try if you wish.  When you uninstall Skype, you will not lose your contacts.

    Research online, I've mentioned suggests that the problem is caused by software Kies from Samsung.  You have this installed on your system?  If so (or even if not), go to C:\Windows\system32 and rename avrt.dll.  You can call it avrt.dlX or something else you like.  Reset.  Let us know if that fixes the problem.  If it didn't, or he did something another break, you can always change the original name (this is why rename is safer than deletion).

    Reference: http://forum.renoise.com/index.php?/topic/31412-solved-ntdlldll-ntalpcsendwaitreceiveport-error-on-startup/

  • The procedure entry point MigrateWinsockConfiguration could not be found in the library of dynamic links MSWSOCK.dll

    Get this message when I start my computer, that is when the sign of Windows in the reception area appears:

    It says netsh.exe - Entry Point not found

    The procedure entry point MigrateWinsockConfiguration could not be found in the library of dynamic links MSWSOCK.dll

    Hey Jay_551,

    I have a good amount of information which I hope will be your answer useful lol.
    For starters, what Anti Virus do you use, the "netsh.exe" has been know to be infected by the virus and be put in a folder by some anti-virus. So I would check that out in your antivirus, I had this info at the following link:
    Also here is the Microsoft article on how to remove the 'Zentcom System Guard", he is recorded as my Microsoft Malware, then read the following link:
    Also because it's a common thing for there to be lack of pop - ups after a system file is infected, and removed from the infection, I would review the last link below it. It was created about other missing files, but the situation applies to you:

    Let us know the status or if you have any questions after these steps. I hope this has been useful and thanks for the display of Microsoft Answers!

  • The procedure entry point PowerEnumerate be found in the POWPROF.dll dynamic link library.

    When I develop a way of debugging the program. The procedure entry point PowerEnumerate be found in the POWPROF.dll dynamic link library.

    Hello

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

    http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

  • SKYPE: "the procedure entry point not found NtalpcSendWaitReceivePort in the dynamic link library ntdll.dll."

    I just updated my version of Skype at: 5.10.0.14, but every time he tries to load at startup, I get this error message: "the procedure entry point"NtalpcSendWaitReceivePort not found in the dynamic link library ntdll.dll.

    When I click ok, it loads. I have re-uploaded twice, but it's always the same!

    Please, can anyone help?

    Hello

    Method 1:
    You can uninstall Skype by using the Fixit, then reinstall.

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

    Method 2:
    Scan the file system (CFS) auditor to repair corrupted files.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

    Alternatively, you can display the query in the Skype forum to get help.
    Skype - Forums
    http://Forum.Skype.com/

  • the procedure entry point ntalpcsendwaitreceiveport could not located in ntdll.dll error whiel opening programs

    original title: ntdll.dll
    When I run no matter what program to progdvb ouvertede find this problom
    the procedure entry point ntalpcsendwaitreceiveport could not be located in the dynamic link library ntdll.dll

    Hello

    Follow these methods.

    Method 1: Follow these steps:

    Step 1: Start the computer in safe mode and check if the problem persists.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start and then click Run.

    (b) type msconfig and click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 2: Scan the file system (CFS) auditor to repair corrupted files.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

  • Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

    has recently had to restore my old computer. When I try to play games on facebook its telling me to install adobe flash plyer x. but it will not be installed. Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

    Hello

    I suggest you to follow the steps in this link and check if it helps:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/Dirext-x-file-d3d9dll-is-missing-Baz/2c639497-CFBA-4C6D-9155-f946f8dc1a45

    It will be useful.

  • Wzcsldr2.exe - Entry Point not found the procedure entry point apsGetReady cound not found in the library wlanapi.dll dynamics. apears after startup

    ---------------------------
    Wzcsldr2.exe - Entry Point not found
    ---------------------------
    The procedure entry point apsGetReady could not be found in the library of links dynamic wlanapi.dll.
    ---------------------------
    Ok
    ---------------------------

    Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

    Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

    Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

    Provide information on your system, the better you can:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The afflicted system has a working CD/DVD (internal or external) drive?

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

    Do you see that you think not you should see and when you see it?

    If the system works, what do you think might have changed since the last time it did not work properly?

    Googling a bit (very little) reveals that the file wzcsldr2.exe or wzcsldr3.exe belongs to a kind of device from D-link wireless connected to your system.

    Fact that sound familiar and you have something like this installed?

    If Yes, then I would get the page Support D-Link and find the latest driver for any device you use and install it.  You may need to first uninstall your device running - I'm sure they must have instructions and tips for the procedure.

    They also have an active Support Forum where you can post your problem/question to see if people there can help you get there.  There is already some discussion in the forums about the problems you describe, but since we know absolutely nothing about your system, you should probably take it yourself.

    I found a few other ideas through Googling, but I don't like some of the ideas I've read and if you stuff worked before, what do you think has changed since the last time it worked correctly?  Did you update or reinstall your device from D-Link or drivers, lately?

  • What the devil? Error: The procedure entry point? detac3@ListData@@QAEPAUData@1@XZ couldnot be found in QtCore4.dll dynamic link library.

    I hope I'm in the good topic section. My computer feezes. I restart or turn off & that is what happens.                                                                                       Error: The procedure entry point?  detac3@listData@@QAEPAUData@1@XZ not found in the QtCore4.dll dynamic link library.                                      He also does this whenever I turn on my computer, even if it does not freeze. I was told that I have to use my CD to get into windows XP, but I have no idea where I put it. What now? Oh, I'm computer illiterate, so stupid it upwards!

    Hi Budge3263,

    1. Did you the latest changes on the computer?
    2. You have security software installed on the computer?

    QtCore4.dll is part of the development environment for a number of applications, including Photoshop Elements.

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you put the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

  • Error message: the procedure entry point sqlite3_wal_checkpoint could not be found in the librayr of Hotlinks SQLite3.dll.

    Original title: IApple synchronize notifier.exe - not found entry point

    I typed a mistake in my first question.  Here he again the question.

    The procedure entry point sqlite3_wal_checkpoint be found in the librayr of Hotlinks SQLite3.dll.

    I called Apple, but they checked my computer and cannot find any problems with the above, but he always comes back.

    Hello

    1. when exactly you receive this error message?

    2. did you of recent changes on the system?

    Method 1:

    Temporarily disable the antivirus on the computer program and check if it helps. If it works, you may need to check the settings of the program.

    Note: check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

    Method 2:

    You can try to uninstall and reinstall everything produced Apple installed on the system and check if this may help:

    Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Maybe you are looking for