Satellite Pro M30 Display Driver

Similar Questions

• Satellite Pro M30: Display settings

  I have a satellite pro m30. does anyone know how to resize the screen. As I am a dj profeshional by trade. I run my show of my laptop. And I need to run at 800 x 600, but it just goes to the middle with a large black border how I re-size it

  Hi Dennis,

  Shoukd you change the resolution of the screen as follows: -.

  Right-click on your desktop and select 'Properties' to open your display properties window. Then select the SETTINGS tab, down on the left side you should see a slider marked "screen resolution." Set this option to change your settings for the display on 800 X 600. Then click APPLY.

  HTH

• Satellite Pro M30 - update driver Wireless Protected Access (WPA)

  I have a Satellite Pro M30 (model PSM35E). I want to get the onboard Intel 2100 3B PCI Wireless card to work with WPA (wireless protected access). The current driver is 1.1.6.0 dated dated 27/03/2003. I am running Win XP SP2.

  This card can support WPA and which driver do I need to update?

  Hello

  I have the same card and the same driver on my Tecra M1. Unfortunately WPA is not supported. I tried to install the fix for Microsoft Q815485, but it did not help.

  Sorry, but I think that there is nothing to do.

  Good bye

• Toshiba Satellite Pro 2100 - display driver resolution - help!

  My laptop screen is 15 inches and resolution 1024 x 768. He worked always good. Until I installed Windows XP SRV 2 once again. Now, the screen only works with 969 x 768 pixels. Without the ability to use the whole poster resolution. So I downloaded and installed the toshiba display driver. But still the same problem. (Black band on the right side) part of the display resolution remains unused and remains black.

  I tried everything in the display settings of display resolution, but the law remains black strip unused

  This unused black band is om the right side of the screen.
  The rest of the computer laptop good workt without problem

  A frend of mine has the same problem with a toshiba Satellite Pro 6100. After insalling Windows XP and the appropriate driver, the screen leaves a band black and unused.

  Can someone help me please?
  Thanks in advance.

  Hello

  Can you please check under display properties > settings > advanced > monitor, is there possibility to activate the option Hide modes that this monitor cannot display.

  If you want, save your data and reinstall OS with recovery CD. Check if your monitor is working properly and there is black band again.
  I ve done the installation of SP2 several times without any problem. It is not a simple to determine what can be wrong with it.

  If you reinstall the operating system and there is no black band again, please let me know. I am very interested about your problem.

  Good bye

• Impossible to update on my Satellite Pro C660 display driver

  Hi, I have a Satellite Pro C660-2DN, and I'm trying to update my display on the site of Toshiba UK driver as Intel takes back me to Toshiba when I do their thing driver assessment.

  I downloaded the last three display driver updates that I can't in the list that matches the C660 but none of them won't install - temporary files are extracted, but then nothing happens. Could someone help me?

  Thank you.

  And what operating system are you using?
  You have still preinstalled original Win7 64 bit home premium?

• White screen after the Satellite Pro P200 display driver update

  I installed the latest display driver ATI Mobility Radeon HD2600 (8.432, on the site of Toshiba through Tempo) on my Satellite Pro P200 yesterday. Reboot, everything seems good as much as the screen "Please wait...". "Windows Vista professional, but instead of showing the page of connection I get an empty screen (with a mouse cursor that moves around as usual). All I can do at this point is to be able to, and I'm running out of ideas on how to move forward.

  Things I've tried:
  # start in safe mode, the video resolution or last known good configuration, result the same screen empty.
  # connect to the system using remote desktop (to disable the driver) is not possible because the system has not yet loaded the network drivers.
  # I can't go back to a restore point because Vista can't find (I did a manual after you install updates windows over a couple of days).
  I can run a system command line options of recovery and prefer to use it to disable the driver + if + I knew how before the use of the more radical options.

  A search on the web (http://www.google.co.uk/search?q=ati+catalyst+vista+blank+screen&hl=en&sa= N) reveals that this has happened on a wide range of laptops with
  previous versions of the driver, but none of the links I've looked at to give a solution which does not exist for me.

  I agree with Hairyfool, you who should solve problems using an external display. If no image appears, then something with the material might be.

  Please give some information about your situation...

  See you soon

• Need XP for Satellite Pro A60 display driver

  My PC in safe mode when on game sites is now and I'm having truble locate the driver.
  I need help laocating and installation which I new complettely instead.

  Hello

  Visit the page of the European driver Toshiba:
  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  Here, you have to choose:
  Archive-> Satellite Pro-> A-> Satellite Pro A60 Satellite Pro

  Then you could find the display driver and can download and reinstall.

  Good bye

• Satellite Pro A100: Display Driver ATI Mobile Radeon X 1400 WinXP

  Hello there :)

  I have browsed the forum and could not find another thread that helps me. I have a Satellite pro A100 PSAACE laptop, equipped with a Mobile Radeon X 1400 graphics card. Now, I was informed by the games that I play that drivers are up-to-date. I think it is true that in the last few days, I formatted my laptop and then only initial drivers from the disc of recovery of the product are to be used.

  I visit the ATI site, and they inform me that I have to contact my laptop to the manufacturer (that Toshiba are not in the list of supported manufacturers) in order to get the new drivers. If I remember I should get all my updates page to download the driver from this Web site. The only problem is that apparently he not there no update driver for the graphics card (to share for one for Vista).

  I recently reformatted my computer using recovery of product, and so that's why I was after the new driver. I don't remember for sure, but I'm pretty confident that I have already downloaded a updated driver for my graphic chipset during the last 14 months of use (before formatting my hard drive).

  Now, if someone could offer any help to find the driver, or have information about the problem, it would be highly appreciated. Once more, my specs (you need to enter on the page of the driver) are portable series A100, PSAAC, PSAACE, and I use Windows XP.

  Thanks for reading, and I would appreciate any feedback whatsoever.

  Hello
  You can find the display drivers at the following location:
  http://EU.computers.Toshiba-Europe.com (Support & downloads), choose your type of laptop and then download the ATI display drivers.

  Make sure that you select Windows XP as the operating system. Check it out.

  But note that the display drivers for laptop computers are not updated as often as for desktop PCs. If you encounter serious problems with your real driver version then just leave it.

  You can find the other drivers on the internet, but to use at your own risk.

  Post edited by: HomerJ

• Satellite Pro 4280 - display driver?

  Hello

  I'm kinda new to all this malarky and could do with help.

  I have a Pro 4280 under 98SE and today tried to upgrade to XP Professional. Everything seems ok, but the display is terrible!

  I tried to change the screen resolution in Control Panel of configuration, but without success.

  Is it just a case of updating the display driver, or is there something else I should do?

  Hello

  If you install the graphics card from the operating system uses just driver installed by OS. If there is no possibility to change the resolution, you should try to install the right driver. Your device's graphics chip "S3 Savage IX" installed. Please consult the producer download site and check if it is possible to download the right driver.

  Good bye

• Re: Satellite Pro L10 - display driver for Win7RC

  Hi-

  Were able to successfully install Windows 7RC on the L10. There is a missing video card driver and I can't seem to find it on the download site (XP drivers seem compatible with Win7 because of its XP mode).

  Apparently, this has something to do with the graphics card & I get the following message is displayed:

  [http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=12.0.7100.0&id=C00D1167&contex tid = 61 & originalid = C00D1167]

  Someone know where I can find the right driver for it?

  Thank you

  Hello!

  Normally, you can find all the drivers for your laptop here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  But it seems that the display driver is available for Windows XP only.

  As far as I know that this laptop is equipped with an Intel graphics card so I would check the Intel website for a Windows driver. I'm pretty sure you'll find a driver for Vista (which should work on Windows 7) and perhaps already for Windows 7 also.
  Check it!

  Good bye

• Satellite Pro M30 - display drivers!

  is it smart to install new nvidia display drivers or stay on the toshiba-nvidia driver that is still in version 45.something?
  When they update the display drivers?

  Hello

  As San Remo said. This graphics card driver protects against overheating. You must use the original graphic driver Toshiba. But if you want to install other drivers, you can do it for you own risk!

  To install the driver, you should go to Device Manager. Here, you must select the graphics card and right click. In addition, you must choose the option install from a list or a specific location. The source of the driver should be the place of graphic driver download.

  Good luck

• Satellite Pro 6100 - display driver and his resulution

  Hello
  I need help :)
  i´ll instaled WinXP SP2 and 1.2 "on the right side... display dosnt work in SP1 is all ok

  display on SP2 driver is Plug-and-Play monitor (display resolution max is 969 x 768) in display resolution seting

  display on SP1 driver is Toshiba Falt Pnael 1024 x 768 (maximum display resolution is 1024 x 768)

  I can't install Toshiba flat back...

  Hello Lubos

  After the update to Windows XP SP2, you must install the latest version of BIOS (v1.9) and graphics driver. All the drivers, tools and utilities that you can find on the Toshiba site.
  Take a look at this link: http://eu.computers.toshiba-europe.com

  Good bye

• Can I connect a DVD multiregion for Satellite Pro M30 Series drive?

  Dear all,

  I want to know if I can connect to my laptop multiregion DVD player to play DVDs in regions other than 2 or alternatevly can buy multiregion DVD player? Thank you.

  Hello Alenka

  AFAIK there is no DVD drive opportunity ton market. All I know is that you can find tools to manipulate the reader and make it multiregional, but it is absolutely illegal.

  Good bye

• Satellite Pro M30, it is recommended to install the new nVIDIA display driver?

  I own a laptop Satellite Pro M30, which includes a GeForce FX Go5200 GPU from nVIDIA. On 27 July, nVIDIA has released a new driver and related software (version 61.77), as indicated by nVIDIA, fits all the its GPU.

  I tried to install this new driver on my laptop (after removing the old driver following the instructions by nVIDIA) but it does not install. Does anyone have an idea why?

  Why the new driver is not displayed on the Toshiba support site driver for this laptop?

  Hello

  All drivers are designed and tested to laptops and Tom is right about producer for laptop. This means that you can find the download page for all drivers needed on Toshiba.

  As much I know Toshiba supports the drivers shipped with the device drivers and updates if necessary.

• Satellite Pro M30 graphics works not when the driver is installed

  Hi all

  I m having problems with my nvidia Geforce FX Go5200, in a portable Satellite Pro M30, (processor Intel Pentium M 1.7 GHz, 512 MB Ram). This card was working fine suddenly the laptop stops.

  I formatted the laptop and installed Win XP PRO. After installing the driver VGA, I restarted the laptop, but black screen started to come right after the Win XP splash screen appears. The laptop continues to start up but no screen.

  It starts fine in safe mode. I get my best screen simply by disabling the geforce card or uninstall the driver. I tried to install a new driver for the VGA on the download from Toshiba site, but same problem appears. I also tried the BIOS update but nothing happens.

  Can someone help me?
  [email protected]

  It's very strange question. It will be really interesting to know if this happens when you use the CD delivered recovery facilities.

  In any case, I assume that there is a problem with the LCD display. In safe mode, the desktop appears in the resolution decreases but the resolution to the OS boot will be suitable for a standard (1280 x 800), and of course, there is the problem.

  I am not a technician, but I recommend you contact the Service partner. AFAIK they use special tools and programs for display tests. They can tell you more.