The quality control and 6.2. Seriously - I can't deliver to my client.

Similar Questions

• I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available.

  I have the internet Charter.  I am a home user.  I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available.  Again, I am a home user.  What does that mean?

  Hello

  1. which user account you are using for Parental control (Please note that you cannot apply parental controls on a user admin account? It can be applied to standard user only accounts)?

  2 have you made changes on the computer before this problem?

  I ask through the following article to find out how to set up Parental controls:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/parental-controls

  http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

  After completing the above links persist issue please fallow the mentioned below of the methods.

  Method 1: Disable UAC (User Account Control) and check the result
  See http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

  Important: Enable UAC after you complete the steps.

  Method 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
  See http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode  

  Hope the above information is helpful.

• I'm still not sure how custom control and object-oriented programming interact, can someone enlighten me please?

  I spent some time trying to understand the relationship between the custom controls and object oriented programming. However, it is not quite clear to me yet.

  What I want to do:

  I want to have a custom control and hide its workings from the rest of the blockdiagram, so I don't have to wire for each similar object. Not only because I'm lazy , but also to keep the clean pattern and avoid mistakes.

  for example, a graph, a numerical factor and a button.

  When the button is pressed, the x scale must be changed according to the factor.

  So, this looks like a job for me to object-oriented programming. Once I created something that can do this, I can use it all through my program. The code that redraws the figure when you press the button as part of the object, so I can't connect extra wires and add a value change event when I add a new chart.

  Is this possible at all? I tried, but did not quite understand this time. I have to admit that I'm pretty new to OO programming and make custom controls. I use typedef clusters ' ed most my code so far, which works very well. But it's always a cluster of stupid, the only way to have nothing at all is in the block diagram in VI you use it in.

  The only thing I could come up with so far is to add an "event handler" Subvi who does and that he accepts a reference or a local variable to an object. Then, this sub - VI and the variable or reference can be put in parallel with the other stuff in the main loop of the program. But there must be a better way somewhere?

  I don't think I can solve this problem of definition of the objects of the Panel before custom and methods so that it can interact with the objects that it represents without help. I get the feeling that I must have missed it somewhere. The pointers will be appreciated.

  Thank you!

  Jacco.

  Jacco K wrote:

  What I want to do:

  I want to have a custom control and hide its workings from the rest of the blockdiagram, so I don't have to wire for each similar object. Not only because I'm lazy , but also to keep the clean pattern and avoid mistakes.

  ...

  The only thing I could come up with so far is to add an "event handler" Subvi who does and that he accepts a reference or a local variable to an object. Then, this sub - VI and the variable or reference can be put in parallel with the other stuff in the main loop of the program. But there must be a better way somewhere?

  Thank you!

  Jacco.

  Hi Jacco,

  These two things are exactly what are the Xcontrols, a basic VI with a façade that has an event structure (the façade VI).

  If you have any questions, I'm happy to guide you.

  Tone

• IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  I have a MacBook from 2008. 4 years ago I moved my iPhoto on an external hard drive. I have thousands if photos on it. IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  < re-titled by host >

  I moved my iPhoto on an external hard drive.

  Did you move the iPhoto library for the external hard drive or the iPhoto application, or both?

  How is formatted the external hard drive? Is the file system on the drive Mac OS extended (journaled) or other system files?  Is the drive directly connected by USB or similar, or is it a SIN?

  IPhoto on the external hard drive will not launch despite the force quit and relaunch several times.

  I don't understand - if you force quit smoking, launches the application, or you can not force it quit?

  IPhoto is suspended without doing anything, when you launch?

  What version of iPhoto does? And what version of Mac OS X?

• After the last update of the operating system and iMovie it seems I can't create a movie in the PAL standard. Can anyone help?

  After the last update of the operating system and iMovie it seems I can't create a movie in the PAL standard. Can anyone help?

  NTSC and PAL are analog standards and don't apply to the share or export settings in iMovie.

  It creates the same FPS and dimensions as your source file.

  What you trying to create?

• I'm trying to reinstall my previous version of Adobe Creative Suite Design Standard. I have the serial number and product number. How can I reinstall without disk? It's a downloaded purchase.

  I'm trying to reinstall my previous version of Adobe Creative Suite Design Standard. I have the serial number and product number. How can I reinstall without disk? It's a downloaded purchase.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4|  6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• When you use the Brush tool, it always comes back to the single stroke and no fill. How can I fix it? I have already disabled the new art of a choice of the basic look.

  When you use the Brush tool, it always comes back to the single stroke and no fill. How can I fix it? I have already disabled the new art of a choice of the basic look.

  Double-click on the Brush tool and you will see important option.

  Please also read the manual on the other options.

• I want to change the size and color of the text in the call boxes and text boxes. How can I do this? Jack

  I want to change the size and color of the text in the call boxes and text boxes. How can I do this? Jack

  Highlite the text inside the text box and press Ctrl + E.

• Network configuration and the Parental control and Powerline wireless Extender

  I'm looking at one of them to help to get wifi in my addiction.

  I need this on the same 'network' as my Nighthawk AC1750 router because I use it with wireless security cameras.

  Two questions about wifi created from extender by current holder:

  1. can I configure wifi with the same name and password powerline network is the 'same' as the network from the router?

  2. the standard OpenDNS parental control on the Nighthawk router will work when connected to wifi extender Cpl?

  zr8000 wrote:

  I'm looking at one of them to help to get wifi in my addiction.

  I need this on the same 'network' as my Nighthawk AC1750 router because I use it with wireless security cameras.

  Two questions about wifi created from extender by current holder:

  1. can I configure wifi with the same name and password powerline network is the 'same' as the network from the router?

  Yes.

  2. the standard OpenDNS parental control on the Nighthawk router will work when connected to wifi extender Cpl?

  Yes, your Nighthawk will still work as the DHCP server for the network and, therefore, point devices on the OpenDNS servers.

• Function of memory in the loop control and Simulation - problem of the ODE Solver

  Hello

  I'm correctly using the control loop & simulation to simulate the behavior of what is essentially a shock absorber-spring-mass system. In the process of change in time (dt) is used to integrate an arbitrary value. I use a rack depending on memory to store the time, to calculate the change of time (dt).

  The simulation is quite complex, because of the precision required, not all the ODE solvers can all support. Currently I use the Adams-Moulton method, this works very well for the simulation. However, it cannot detect the change in time, the change is constantly zero. This problem has auto market by using an another ODE Solver, but then the simulation has been messed up instead (even when I listen to the step sizes and tolerances). So I'm pretty confident that Adams-Moulton is one of solver ODE best suited to the problem at hand.

  Is there another way to store the previous hour and use it calculate lag, that the use of the memory function? Everyone knows about these problems before?

  I did a lot of research of error using the probe, but I'm sure that there is a problem with the ODE Solver and memory function. See the image below, showing basic how is calculated the change in time.

  I'm pretty new to LabVIEW, so if there is something else I missed I would be happy to hear it.

  PS! I set the tolerance minimum step of size/relative and absolute for the Adams-Moulton to simulate the behavior of the system properly.

  Problem solved!

  It turns out that the ODE Solver has struggled because of two "table 2D find" used functions. This was created for the interpolation/extrapolation, which caused a problem constantly and the ODE Solver could not resolve correctly, so the functions of memory doesn't work does not correctly or the other.

  By increasing the table manually, I could use closest method instead, with also good results as interpolation.

• I opened my control panel, click the game controller and his party. How can I get that back

  my game controller is gone he was there and now his party. Can I use my game controller some how the driver who was on my computer that control the game controller is gone and I don't know where he is and what has happened. can someone show me how to or tell me how to recover my controller. send me a link.
  Thank you

  Hi Reynard7,

  1. what game controller you are using?

  2 did you change on your computer before this problem?

  You can perform the system restore to revert to the previous state when it was working fine:

  a. click Start, type system restore in the Search box and then in the list click on the system restore program.

  If you are prompted for an administrator password or a confirmation, type your password or click continue.

  b. in the System Restore dialog box, click choose a different restore pointand then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  System Restore: frequently asked questions

  Hope the helps of information.

• The parental control and administrator capacity display

  Can I view dialogues of my son on AIM or IMs on Facebook?

  Hello

  See this and the 'related links '.

  How to install and use Parental controls in Vista
  http://www.Vistax64.com/tutorials/95139-parental-controls-Setup-use.html

  and these:

  Setting up Windows Vista's Parental control
  http://www.bleepingcomputer.com/tutorials/tutorial139.html

  Set up Parental controls
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  ---------------------------------------------

  It is a software of supervision which would record everything as the type of children.

  Reviews of PC - Mag - Parental control and monitoring
  http://www.PCMag.com/Category2/0, 2806,1639158,00.asp How to buy Parental control software
  http://www.PCMag.com/Article2/0, 2817,2346997,00.asp

  See also sponsored links and downloads here
  http://www.PCWorld.com/search?Qt=parental+controls

  Google search
  http://www.google.com/search?hl=en&source=HP&q=Parental+Control+Software&aq=f&OQ=&aqi=

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Remote Desktop - conflict between the remote control and the host user?

  We set up Microsoft Remote Desktop on a Mac with a remote computer that is running Windows 7 Professional.

  What happens when:

  1. the remote user tries to connect to the Windows host computer while someone is working on it?

  2. a person is trying to work on the host computer, and the remote user is logged?

  Is the second locked user, is there a warning of the conflict, or is there another way that Remote Desktop manage such a conflict?

  DRM for any assistance you can provide.

  Stuart A. Forsyth

  E-mail address is removed from the privacy *.

  Hi Stuart,

  Thanks for posting your question on the forum of the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  For reference:
  http://Windows.Microsoft.com/en-us/Windows/Remote-Desktop-connection-FAQ#1TC=Windows-7

  Thank you

• How can I add a space to the toolbar in Firefox 29,0? I can enter a space between the empty boxes and move around, but where can I find an icon 'space' to ADD a space?

  It has been useful in previous versions of Firefox to be able to add (a) space (s) between the icons in the toolbar to create groups of icons and/or icons separated by class or function. In Firefox 29,0, I discovered how 'capture' (drag and drop) a space of areas in the open toolbar and move it to another part of the toolbar. But how do I add spaces to the toolbar? In previous versions, there used to be an icon of the space in the whole of the Customize menu that could drag it to the toolbar for this purpose.

  Sorry, the new UI Australis has abolished the 'space' to customize. There may be an extension for adding 'space', but I'm not aware of it.

• Signs of Windows on automatically without having to connect. So, I have to go in the taks Manager and log. So I can log on and all programs of work.

  1 have had any changes made on the computer before the show? NO.

  2. what programs you're talking about? All programs

  3. do you get an error message? If Yes, what is the full and exact error message? No error message

  A moderator has moved this thread to the Windows Performance and Maintenance Forum.

  Hello, Erik.

  I see that you have been through the process before, lol.  Windows OS?

  Some programs do not work correctly if you log on with a limited user account

  http://support.Microsoft.com/kb/307091

  Programs that use DCOM do not work correctly after you install Microsoft Windows Server 2003 Service Pack 1

  http://support.Microsoft.com/kb/892500

  Perform a clean boot to determine if background programs interfere with your game or program

  http://support.Microsoft.com/kb/331796

  You can also try to create a new profile.  Test and check if the problem persists with the new account.  If everything works, your profile is corrupt.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile