The reactivation of windows after a reset of the hard drive?

Similar Questions

• Satellite Pro M30 PSM35E - after the sound of the HARD drive, I can't reinstall Windows

  After the hard drive noise I couldn't reinstall Windows. It stops after a few seconds.

  Buy a new hard drive and what the specifications?

  Hello!

  Of course, you can buy a new HARD drive, but I would be interesting what laptop you have.
  Otherwise I can t say that the HARD drive that you need.

  Good bye

• Windows XP cannot be installed on Satellite A30 after replacing the hard drive

  Hello
  you have a problem with my satellite A30 - hard drive has been corrupted (due to accumulation of dust on the cpu!) and I replaced it with a 100 GB hard drive.
  Tried the 'recovery cds', but get an error message 'error #1537 file greater than 4 billion number' and recovery has been abandoned halfway after inserting the third cd. The XP Home operating system does not install completely. Any suggestions?
  Thank you very much for your help, has soon
  NJ

  Hello

  already tried the recovery process more then once? If so, the error appears at the place of installation? You said that you have installed a new hard drive but actually you have formatted the hard drive before you perform a full restore? That would be really helpful, sometimes recovery is suspended because the disk formatted or partitioned before luckily.

  You should really try. One way would be to use the "UBCD4Win' which is a Windows Live CD with really good tools. Format your hard drive with this CD and retry the recovery. Maybe it works...

  Here´s the link to the CD "UBCD4WIn": www.ubcd4win.com ".

  Bye and good luck

• ThinkPad R60 cannot install Windows XP After erasing the HARD drive using the lenovo diagnostic utility

  WinXP pro Setup cannot find that any installed HARD disk so cannot install windows. Unfortunately after many attempts to use rescue and recovery to restore the factory settings and for some reason constantly default... After leaving another utility popped up giving me the opportunity to erase the HARD drive and so I did... After fact as well and all I had was a blank screen, no windows more or no matter what utility to reinstall windows, then I used my winxp pro installation CD, but the program installation would continue not after a certain point by saying that the installation did not find any HARD disk installed. followed by "ensure that any disk HARD r turned on and correctly connected, and that no matter what material associated drive configured correctly, this may involve running a manufacturer provided diagnostic or Setup program. Clearly it took me by surprise. What was supposed to be a cut to white erase and reinstall now me baffled and angry. Formats the HDD of the solution? If so why didn't not the usefulness of lenovo do... If not, what is the problem? Someone help pls

  Welcome to the forum!

  Go into the BIOS (F1 at startup), set the "compatible" SATA mode (NO AHCI), then press F10 to save and exit, and you should be all set.

  Good luck.

• Reinstall Windows XP Home Edition 2007, version 5.1 (Build 2600.xpsp_sp3_gdr.101209 - 1647: Service Pack 3) after the failure of the hard drive and without operating system installation CD?

  I was using an old computer and now I have a new and I want to give the former to my nephew, but I want to wipe the hard drive completely clean, in order to get rid of personal information. I don't have the CD of Windows XP OS came with the computer. After the failure of the hard drive, how can I recover 2007 Windows XP Home Edition Service Pack 3? The computer that I'm talking about is 9 years old and is a Toshiba Satellite 1415-S173.

  Hi Bobby Collas,.
   
  You must have a copy of the installation CD without which you can not re - install the OS again.
   
  If it were an Original Equipment Manufacturer (OEM) installation, you can restore the factory settings. Contact the manufacturer to do the same.
   

• Windows Update does not work after the hard drive has been replaced

  Hello
  I have the same problem, replaced in my Toshiba HD, rebuild from Sysimage, Windows Update does not work. A ran "fix the problem with the Microsoft Windows Update is not working.
  Problem still exist.
  The message that I got while trying to update: "Windows Update cannot currently check updates,
  because the service is not running. "You may need to restart you computer.
  Stop and then restart the service, still no luck.

  I ran Windows troubleshooting. He finds two problems with Windows Update components, it corrects.
  The problem still exists.

  The other post:

  Another interesting fact:
  After the reconstruction the new disk, user account control does not recognize Windows programs.
  for example: execution of Perfmon.exe, the Publisher is unknown! However, when I download the program Windows FixIt, Publisher is recognized as Microsoft Windows. It seems that user account control does not recognize the Windows programs that had found the new HD, but acknowledges those who is downloaded from the internet.
  I guess there is a problem with the license, Windows was preinstalled on the Toshiba and replace the hard drive could have caused a few conflicts of licensing.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

  The same problem. Cloned old HD on a larger hard drive. Everything worked perfectly except NO indexing and update WITHOUT windows - the two recurring problems that seem to appear on the forums after a change of hard disk.

  INDEXING resolved with change to "Intel rapid storage technology." Google what I put in quotes, choose the Download Center and get the specific to your OP and the controller software.

  UPDATES have been a little more frustrating. The microsoft .fixes and convenience stores were without help.

  Go to control panel / system and Maintenance / administration tools

  Select Services

  Stop the Background Intelligent Transfer Service

  Stop Windows Update

  In 'My Computer' go to Windows / Software Distribution

  Right-click "DataStore" folder. Rename it to Datastore.old

  Rename the folder 'Download' Download.old

  Return to Services and restart the Background Intelligent Transfer Service and Windows Update.

  Look for the updates. It will take some time because you deleted the database.

  I hope this helps!

• Cannot install a version upgrade of Windows Vista after changing the hard drive.

  Original title: my computer gives me a warning... saying backup.

  My hard drive is bad.  I can feel it.

  Keep the system lock up and rebooting message says cable and BAD status.

  I took the hard drive... put in a new one... and now it says I can't install vista.

  I have the version upgrade.

  I put XP on this drive and upgrade again.  Y at - it something I can do.

  I want to just reinstall windows vista on a new drive.  How can I accomplish this.

  The bad hard drive still works and is accessible it is not stable and keeps locking up.

  The full version of XP that I have is out of licenses.  Help Help

  Hi Rob,

  You must install first Windows XP and upgrade to Windows Vista.

  If you have a genuine copy of Windows XP, after you install Windows XP you can contact support for Microsoft's Activation to activate the copy of Windows XP.

  For more information, you can consult the following articles:

  Upgrade Windows XP to Windows Vista

  How to activate Windows XP

• After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive.

  * Original title: hard drive

  I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?

  Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader.  If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key .  Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader.  If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.

  If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install.  If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.

• How many times can I install Windows 7 on your PC even after I continue to update the hard drive SSD for a bigger?

  How many times can I install windows 7 on your PC even after I continue to update the hard drive SSD for a bigger? Unlimited?

  Mike

  There is no limit.

• How can I reinstall windows 7 after replacing the hard drive?

  How can I reinstall windows 7 after replacing the hard drive? do I have to call microsoft or I can retrieve it somehow to the old hard drive?

  Well, that certainly puts a different point of view on this subject.

  There are data recovery services that can recover data from disks that have suffered from various types of failures. However, they are quite expensive. Unless the data is particularly useful, it is generally not useful.

  If your Windows 7 is an OEM version, installed on the computer when you bought it, the manufacturer could have a recovery disk on sale. If it was a retail copy and you always have the appropriate product/serial number, you can get a DVD of their team of parts replacement.

  http://support.Microsoft.com/kb/326246

  Tom Ferguson

• Activate Windows 7 using the same product key after changing the hard drive.

  Original title: activate windows 7.

  Before that I put a new hard drive, should I the new product key or the same product key?

  Did you follow this advice?

  If it requires no Activation phone after replacing the hard drive, do not follow request to Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

• can I reactivate windows 7 by using the ID of the original product after upgrading the hard drive.

  Original title: reactivate Windows 7.

  I want to spend the hard drive on my laptop.

  The question is, when I remove the old hard drive and put a new, obviously, I need to install windows on the new drive system, can I reactivate windows 7 by using the ID of the original product?

  If this is not the case, how can I do?

  Thank you.

  How to pass windows 7 to a new hard drive using Acronis True Image Home 2011:
  A step by step guide on the use of Acronis True Image Home 2011.
  http://www.PAGESTART.com/acronisnewharddrive01.html

  (Note: Acronis is now 2014, but the technique is the same)

  Other Image backup options:

  Acronis True Image 2014 - has a 30 day trial version available, key to test sent to your Email address.
  Note: Initialization of cloning and the road (creating a MBR) are not supported in the trial version.
  For the trial version, the recovery is only available when starting an Acronis Bootable Media CD.
  Install Acronis and then create a bootable media restoration/rescue CD before you start creating your first backup image
  http://www.Acronis.com/homecomputing/products/
  30-day trial: http://www.acronis.com/homecomputing/products/#tryorbuy
  True Image User Guides and documentation:
  http://www.Acronis.com/support/documentation/
  2014 supports XP, Vista, Windows 7, Windows 8 and 8.1

  Paragon
  Free version: http://www.paragon-software.com/home/br-free/
  Guide: http://www.paragon-software.com/home/br-free/download.html
  Home Version $ 39.95: http://www.paragon-software.com/home/brh/
  Support: http://www.paragon-software.com/support/

  Macrium Reflect free
  Free version: http://www.macrium.com/reflectfree.aspx
  (no technical support available for the free version)
  Macrum reflect Standard ($49.99)
  http://www.Macrium.com/personal.aspx
  Suport: http://www.macrium.com/ticket.aspx

  Note: For users who have a Western Digital hard drive, there is a free version of Acronis 2013:
  http://support.wdc.com/product/downloaddetail.asp?Swid=119
  Release notes: http://support.wdc.com/download/notes/ATI_WD_RN_5962.pdf
  Guide users for WD Version: http://support.wdc.com/product/downloaddetail.asp?swid=119&type=userguide&wdc_lang=en

  How to pass windows 7 hard disk nine or greater using the backup and restore of Windows 7
  http://www.PAGESTART.com/win7bckuprstrnhd072610.html

  After you moved to the new drive and are convinced that everything is working Ok, then you can format the drive or temporarily start from the old drive and open a prompt (run as administrator) and quick entry: slmgr /upk and press ENTER.  This allows to uninstall the product key from the old drive.

  J W Stuart: http://www.pagestart.com

• How to re-enable Windows 7 after reformatting the hard drive?

  After I reformatted my laptop hard drive and reinstalled windows 7, using the same product key that I used to activate my laptop when I saw, but couldn't activate it. The answer I get is that he doesn't seem to be a valid product key.  So, is there a way to reacitivate Windows 7?

  TIA

  Søren

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• This copy of Windows is not genuine after replacing the hard drive

  Hello, I bought a copy of windows 7 Home. My hard drive crashed. replaced the hard drive, now it tells me that windows is authentic noty. How can I fix it?

  So that we can analyze and solve a problem of non-genuine notification you can experience, download and run it Microsoft Genuine Advantage diagnostic tool . 

  After you run the tool, click on the button continue, then click on the copy button, then paste the report into your post.  In addition, please include a brief question or relevant information that might be helpful in our efforts to help you.

  Thank you!

  Carey Frisch

• Reinstall Windows 7 after adding RAM does not work, if the serial number on the hard drive doesn't go to Microsoft?

  The serial number of the hard drive go to microsoft, I went to reintall my windows after it kept crashing, updated my hard drive, memory, ram.  I think because the serial number is different on the hard drive, it will not be installed.

  System becomes inadmissible has nothing to do with the product activation.

  The probable cause is faulty RAM or loose, make sure that the memory modules are firmly fixed and mounted in banks of memory on the motherboard.