the reader of cd/dvd lightscribe burner on my pavilion dv9308nr has stopped working.

Similar Questions

• The dvd/cd device on my hp g62 has stopped working.

  The dvd/cd device on my hp g62 has stopped working. The message I get tells me that the configuration information is incomplete and reinstall the driver. I tried to reinstall the driver automatically, but the operation failed. I can't manually install driver because the only information I have on the manufacturer, it is what it is "Standard CD-ROM.

  Processor: i3 Intel (R) Core (TM)

  Operating system: Windows 7 64-bit

  Try clicking on the device in Device Manager and click on uninstall.  The device must be reinstalled on reboot.  Please post your complete model that is usually listed on the bottom of your laptop if it does not.

• Once the programs are open a window pops up to say "program has stopped working". Even the programs that are running in the background when starting up are close. Help?

  Yesterday I connected my laptop and when I tried oppening a program a window pops up say "program has stopped working". I opened the control panel to start the troubleshooting, and another appeared window "Control panel has stopped working". I tried to open microsoft word and another window popped up, it is true, that you guessed it "word has stopped working". Does anyone know why all of a sudden nothing works?

  Hello

  try a SafeMode system restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• CD/DVD-Rom on a Satellite 1110 laptop has stopped working

  Hello

  The CD/DVD-Rom on my satellite 1110 has suddenly stopped working. When I insert a cd or a dvd there is no activity in the drive and when I look in my computer there is no recognized files.

  I used the Device Manager and it says that the device is working normally. It's like the PC just can't 'see' the camera more.

  I used the program of troubleshooting without success and I was wondering if someone technically a little more spirit that had me ideas

  See you soon

  Rob

  Hey, sorry cannot be of any help to you, but I'm having exactly the same problem. I can't find a place to download the new drivers.

  did you progress?

• Webcam HP Pavilion DV6 has stopped working, it worked before, the message says webcam not started.

  The pre installed webcam works perfectly, but somehow, it works now so I;  I have re-insatalled Cyberlink software, but the webcam is not listed in devoce Manager, I get a message saying that the webcam is not started or is not found.  CyberLink Youcam software opens well, but the camera seems not to turn on. Is there a switch for the webcam harware? As there is a work around and turn off the WiFi? Perhaps a system configuration that controls what devices at boot time startup. It's as if the unit is just off, not activated, the close the lens light now, it used to.

  Your help will be very appreciated.  How can I activate my WebCam HP pre-installed?

  TIA

  It comes to my HP Pavilion dv6and the problem of my WebCam suddenly stopping.  I have posted two previous requests for assistance, does NOT see much in the way of answers.

  If I had held my breath waiting for some help or answers to this place - I'd be dead now days.  I tried everything I could think of; reinstalled the software, drivers.  But the error message was always the same saying that "the webcam was NOT turned on."  Back, through some other posts, that I could see that others have also had the same problem and all the guys from HP that mentions his HP job; has said was to reistall the software, or choose the webcam in the CyberLink WebCam software. but this option is still grayed out.

  So I just bit the bullet, because I had to do in the past.  I took off the inside of the plastic frame for the screen at the top and sides.  I had to unscrew two screws at the bottom of the screen frame to the hinges, under self-adhesive pads oval plastic/rubber.  In the Center, you can see the small Assembly of camera and microphone, with white wires, it will.  At that time, I had to put on a second pair of reading glasses, because the parts are so small.  I finally found a tiny multi wired plug-and - taken right of camera lens Center.  I loosened and then pushed with a small bamboo skewer.  When I buttoned up things up; and restarted the CyberLink WebCam driver program came to light on near the lens and the camera showed a live video image which aimed directly at me.  This plastic frame is very fragile and the two small screws will immediately far jump on the floor that you haven't cleaned vacuuming lately.  Has disappeared!

  I must say that I have had absolutely NO help from anyone at HP, I is uncomfortable taking my laptop apart to fix a poorly designed plug/plug obvious for the WebCam.  I like really this computer basically, perfect Beats Audio work for my deafness, I get more and more clear than any other volume laptop that I have tried over the past 20 years.

  I added Ram 16GBs of memory, but I have not noticed that much improvement, maybe when I make more digital video, CAD/CAM and photographics.

  I hope HP can get the image into the connector on the WebCam release and let us know how to fix it with a technology tech or something.  I tried searching and was NOT able to find the answers for my laptop either, I had the chance-out to allow him to run again, I hope you can get yours working again too.

  See you soon,.

  R & R

• Not Microsoft Windows - bar tasks or the Start button "register Microsoft windows not updated, (he is) Microsoft Windows has stopped working".

  On the computer startup, there is no button or the start task bar.  window appears reading: "Registry Microsoft windows not updated, (he is) Microsoft Windows has stopped working."  I could get on the internet, but I have a blank desktop!  What should I do?  Re-stall the disc?  I have a tower HP w / Vista bought in 2008.  THX, Lizz

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Let us scan SFC and check that it prevents this error to occur.
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
  To do this, follow these steps:
  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833
  
  Method 2.
  a. also, you can try again user account if the problem is resolved.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
   
  b. If the problem does not occur in the new account user set your user account damaged. The steps to fix the corrupt user account are given below.
  Fix a corrupted user profile.
  http://Windows.Microsoft.com/en-in/Windows-Vista/fix-a-corrupted-user-profile
   
   
  Let us know if that helps.

• Adobe Acrobat Reader DC has stopped working.

  After a WIndows 10 automatic update last night, now I can't watch pdfs. The file opens, but your message window opens by saying it has stopped working and closes the program.

  Hi Stats4gnats ,

  Please try to run this on your system cleanup tool: Download Adobe Reader and Acrobat cleaning - Adobe Labs tool , restart the system and reinstall CD player from this link: Adobe - Adobe Acrobat Reader DC Distribution

  Let us know if that helps.

  Concerning
  Sarojini

• "Dell Support Center has stopped working and microsoft has closed the program in order to find a solution."

  Original title: I get a box indicating the dell support center has stopped working and microsoft has closed the program in order to seek a solution, then nothing happens, and the box comes up again and again?

  I get a box on screen telling me that the dell Center support has stopped working, and microsoft has completed the program to check the solution

  It happens every 5 minutes but never comes up with a solution

  Hello

  Refer to this article and follow the steps to help solve this problem.
  Dell Support Center has stopped working error appears
  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=427832

• the Windows Firewall has stopped working

  I tried the system restore to just before it stopped working

  Hi geoffrey,.

  System restore would have been my first suggestion, so that was an excellent choice on your part.  I would try it again maybe a few days earlier just to be safe, he did not start before you really notice or before, it became clear, as it is certainly the simplest answer, but frankly, I doubt that it will be more effective (but who knows - he can come back works perfectly and we are both happy, it was considered).  He also suggested that you know a little about computers, so I can provide instructions that contain everything you need but I will not go into nauseous detail unless you get stuck on a step and then you should post any problem you encounter and I will provide more help.  If you should post, don't forget to answer as many questions and include both the results of the proceedings or reports or copies or screenshots of screen that you can at the same time, so we can work on what to do then if none of this made the turn.

  How do you know if what she has stopped working?  Do you have an error message (if so, what was the full and exact message Word for Word, including all codes)?  You have more than one firewall installed on your system (like that which is part of Norton Internet Security, Comodo, or something else)?  What security programs do you use and that you have installed (all names and versions)?  What version of Windows you are using (for example, 32-bit Vista Business SP2 or other - please be precise otherwise)?  When this occurred and did you a software or a hardware changes (additions, deletions, upgrades or anything like that) since two weeks before the problem (if so, precisely what has been done in as much detail as possible)?

  Do you get this Center security or firewall Windows itself?  If you are using XP, post back with answers given that there is a limit to the options how can I cover without knowing the basic information.  If you use Vista or W7, go to Security Center or action center and check to see if there is a problem with the notification of the firewall or it's on.  If it's not on, it shows the details or links containing information about the problem?  If Yes, go to these links and copy the information and post here, so we can look at.

  Then go into firewall Windows itself (on the left side of the screen) and confirm that there is a problem.  If she too says it is disabled, click on change settings.  Make sure the firewall is turned on - if not turn it on, click on apply and then click OK and confirm that it starts and begins to work.  If it does not start, it provides an error message (If Yes, what is completely and exactly Word for Word with all codes)?  Click Advanced, and verify that all network connections are checked - make if all are not and click OK, then again try to turn on the firewall.

  If this does not work, go to start / Control Panel / Administrative Tools / Services and then highlight the Windows Firewall and click Open.  Click dependencies and go to each of them and make sure they are started and automatic.  Otherwise change it to automatic and start them.  If it is impossible to do, check their dependencies and do the same until you reach the end of the chain of dependence.  Now return to Windows Firewall and make sure that it is set to automatic and started.  Then restart.  When the system returns, return to the service and confirm that the Windows Firewall is started and automatic.

  Now, go into Windows Firewall and again try to launch and see if it lights.  Go to the center of security or Action and check that the firewall is enabled and works.  If so, the problem can be solved.  Just to be sure, restart and check the firewall to ensure that it is on and working.  If so, who should be the one.  But we do not know why it stopped, and if the problem may come back, then we must redouble efforts to find the cause or confirm that there is no problem.  Moreover, if the above did not work and Windows Firewall is still off, here's what you should do in any case.

  Go to start / Control Panel / administrative tools / Event Viewer and look for error messages regarding the Windows Firewall (there will be errors).  Look in system first and then in Applications.  When you find the error or errors, click on it for details, copy these details and display them in your next reply.  Well, they can help us identify the source of the problem and there a fix for it.

  We will check your system and hard disk for corruption files and try to fix it:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  , Type sfc/scannow go and let it run.  It will scan and try to the difficulty of some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  They tried to set itself to run at the next reboot.   Answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  Then, we will confirm this is not caused by a malware any.

  Update and run a full scan with no matter what security software you use, and remove or quarantine everything you find.

  First, try the following programs if you do not, because they can help. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx. This may or may not remove the infections, but will probably not correct the damage caused by them. Even if they or your current AV software seem to work or indicate that you are not infected, you should not completely trust in them and must continue with the recommendations that follow (so it's up to you if you want to try them first, or just ignore all this and get help from an expert you really need as described below).

  Correctly and completely remove these infections can be complex and often require manual removal procedures (which may or may not be entirely effective either). Even if they work, I suggest what follows in any case, so that we can start it (you can ignore the methods above if you want it really is the way forward, but it won't hurt to them for trying).

  Please follow these recommendations of JimR1 - MVP compliments:

  You are running Microsoft Security Essentials?

  If Yes: start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected - and support and select the option for phone, chat or email (options vary depending on the region)

  If you are in North America, you can call 866-727-2338 for a free Microsoft Help for infections of virus and spyware.

  Otherwise:

  You can start here: https://consumersecuritysupport.Microsoft.com/ or here: http://support.Microsoft.com/contactus/cu_sc_virsec_master?WS=support#TAB0 for the help and support for malware infections.

  If this does not work, or that they can't help, try one of the compliments of forums-remove malware following PA Bear - MVP:

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?Board=10.0 http://www.spywarewarrior.com/viewforum.php?f=5 http://www.dslreports.com/Forum/Cleanup http://www.Bluetack.co.uk/forums/index.php and http://Aumha.net/viewforum.php?f=30

  I hope this helps.  If none of this worked, then after return with answers to ALL the questions above (especially the first paragraph) and the results of all the procedures and the test that you tried in as much detail as possible and with two copies of reports or screenshots (as you prefer).  Without this information, we do not know where to go next without guessing or recommend a more radical proposal that may be required.

  Good luck!

• "MessagingApp.exe has stopped working" error when I turn on the computer.

  In the last few days I have been making a "MessagingApp.exe has stopped working" message every time I spend on the laptop. When I go to "All programs" all windows and Yahoo programs are red in color. I did a search for "MessagingApp.exe" but it is not found, but when I looked in 'Program Files'-'alternative E-mail' I found it but it will not run. I can't connect to Yahoo Messenger.Can help you? I have Windows Vista Home Edition thank you, McEvor

  original title: error MessagingApp.exe

  Hello McEvor,

  1. don't you make changes to the system before the show?

  2. Since when have you been faced with this problem?

  Try the following steps to try to get the fixed number.

  Step 1:

  Try to put the computer in a clean boot state to see if the same message appears

  A clean boot helps eliminate software conflicts. Visit the link below to learn how to perform a clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Once the troubleshooting is over; reset the computer to start as usual in following step 7 from the link above.

  Step 2:
  An analysis of security and verification for infections.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  1. you can run a virus scan online from the link given below and check if the problem persists.

  Microsoft safety scanner

  2. in addition, make sure that you have installed on your computer, antivirus software was last updated so that it works correctly.

  If the problem persists, please contact support messenger yahoo from the link below for more support.

  http://help.Yahoo.com/l/us/Yahoo/helpcentral/

  Hope the helps of information provided.

• In Vista, you receive the error message "Vandenberg Clyde Punjab Scottsdale Columbia Watertown Hebrides has stopped working" when the windows sartup

  I get this error message when starting windows - the message is:

  Vandenberg Clyde Punjab Scottsdale Columbia Watertown Hebrides has stopped working and I'm not that mean?

  and since i ' v got this message I can't use internet explore properly and when I lick the icon to lunch the internet explore I have a blank page, but if I do a right click on the internet icon one select run as administrator, it works without any problem can someone help me?

  Ahmed atta

  Egypt

  Hello

  Please let us know if you are facing problems when you use Internet explorer on the computer and is the fixed startup error number.

  Use the method to send the snapshot to the question below.

  Use capture tool to capture screenshots

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

  Use SkyDrive download collected files and after shot/screenshot.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/

• Control Center cataslyst error "the host application has stopped working".

  Hello

  Is anyone know the cause & how to fix error "catalyst control Center - host application has stopped working"?

  Hello

  1. when exactly you get this error message?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  Method 2:
  Try to update the latest drivers for the graphics card and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• In Windows 7, the message "Windows Explorer has stopped working" on a daily basis

  My hard drive on my Dell E5420 died in November, and I had to get a new one and reinstall everything.  Since I was doing a Windows Exporer has stopped working message on a daily basis.  It seems not to be any rhyme or reason to when it occurs.  The details of the problem are below...

  Description

  Application of vulnerabilities path: C:\Windows\explorer.exe

  Signature of the problem

  Problem event name: APPCRASH

  Application name: explorer.exe

  Application version: 6.1.7601.17567

  Application timestamp: 4d672ee4

  Fault Module name: StackHash_1062

  Fault Module Version: 6.1.7601.17725

  Timestamp of Module error: 4ec4aa8e

  Exception code: c0000374

  Exception offset: 00000000000c40f2

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  Information additional 1:1062

  More information 2: 10627f8784ab27b0a288ca8932b95911

  3 more information: 01fb

  Additional information 4: 01fbd1f85968f86da1c3a5e6eaa045cc

  Additional information about the problem

  Bucket ID: 57749939

  Hello

  Welcome to the Microsoft community. According to the description of the problem you get the message "Windows Explorer has stopped working" on a daily basis.

  I'll help you with this problem. I suggest you follow the steps in the article.

  Explorer Windows stopped working

  Note: After completing the steps in the clean boot troubleshooting, follow the article How do I reset the computer to start as usual after a clean boot troubleshooting section to start the computer to a Normal startupmode.

  Error: Windows Explorer has stopped working

  Note: You must take the backup of the data before performing any installation of windows.

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• The P7-1030 HP come with a cd/dvd lightscribe burner?

  The P7-1030 HP come with a cd/dvd lightscribe burner?

  Window 7 64 bit

  No changes have been made to the system before the broadcast took place.

  DoubleG2, welcome to the forum.

  Here are the Specifications of the product for the computer.  I don't see anywhere in the specifications that it mentions the ability Light Scribe.

  If your problem is solved, please click "accept as a Solution.

• Add DVD LightScribe burner to my desire to 700-060ea

  I opened my machine and had a look to add a DVD LightScribe burner and although I see a lot of traffic to provide the power, I don't see any data (sata) connectors to connect on the second disc.

  There are four sata ports on the motherboard of karim to your desktop PC.

  

  You will need to buy a SATA cable to connect your new DVD LightScribe burner and an unused port. You can buy them at any electronics store, including your local Wal-Mart.