the recovered data is only a row during rman recovery Camille

Similar Questions

• Want the old data of Firefox, old PC died, new recovery keys will remove old data on server.

  I created Sync on my hard drive now unusable, with all my goodies of Firefox on it. I am now on another hard drive but when I try to set up the synchronization and recover my old data, he said that I need a recovery key. I can't get a so it generates one, but a new will apparently remove the old data that I want to do unnecessary synchronization. How to access my old data without a key?

  I was and am now running Firefox 28.0 on two hard drives.

  Hello, it is not possible to recover your old data sync without the recovery key, because the data is stored encrypted on mozilla sync servers and it's the only key to decrypt. If you have already generated a new recovery key and then also data on the servers was overwritten - so I'm afraid that this data is lost for good...

• 1.5 TB in the store data but only 850 GB configured, there are increases of 100GB

  I'm sure this has been asked and I'm sure there's KB and answer on this, but for some reason my search terms are coated quite desolate specific instructions not in advance if you think I should have found the answer on my own.

  In any case, ESXi 4, 1.35 TB in datastore1, 868GB provisioned - 788 GB Used, 475 GB free. I have a server with the shots that I need to clear, but I'm afraid that there is not enough room to do this direct removal. I would like to make off with the prompt deletion but is a production company and with no idea how long the merge/delete would take that all is not an option. The guest virtual computer is about 150 GB used with the installation of disc 3, 100, 200, 200, so my way of thinking was the simple solution would be to use a part of this 475 GB Free and slide it on in the configured space, say 150 GB but I give, how the hell can I do that?

  I want to stay within the VSphere client or use a command-line linux tools limited amout and want to live if possible, you would think that you can.

  Another option would be to reduce the hard disks assigned to the virtual machine as the 200 GB 20 GB used, the 100 GB about barely used 40 GB. Leaving the only boot OS if I those of readers has declined while the snapshot delete would be that help and an easier way?

  Snapshots are OLD, so let's assume that they will require the full space possible amout to merge. One of them has been since the OS has loaded some two years, well before the databases have all the data or who knows what else (this is not my server, I got).

  The file .vmsd you PM'd me is partially damaged, that is, it has more than one entry with the same uid, pointing to the same uid parent but the names of different parent disk! But anyway, if you can confirm that the current virtual disk in the .vmx file name is '... 000005.vmdk', it should work to delete/merge the first (your) snapshot in the Snapshot Manager and once the last single snapshot is here, and then use the "delete all" button to delete/merge. He will ignore the entries .vmsd and should also clean the file.

  André

• FileVault crypte free space as well as the recovered files or only those recovered?

  File vault encryption

  As far as I know, and I do not use if someone can correct me or save me on this, FileVault encrypts the entire drive.  That, to me, means everything.

• How to recover data after executing an operation of product recovery

  Hello

  Recently, my computer Toshiba has been a blue error screen. I tried to start the computer in safe mode and all other available modes, but the blue screen kept appearing. I had no other choice than to launch the product supplied with the laptop recovery CD. Once this was done, I was happy to discover that the laptop was working, but all my files were deleted! Now, I know that this means that the HARD drive has been formatted for the product! recovery operation, but is possible in which to find my lost files?

  Desperately need help.

  Thank you

  Matheson

  Hello

  Not easy to say because prior to installation, the HARD disk is formatted and existing partitions are also replaced. I really don't know what to say. If you have some very important data to try to talk with experts. Google all over the place. I hope you find someone who can help you.

• question: format / 'language' of the current Date (in the date/time field), javascript only

  Hello

  I have 2 date fields in my form, which should display the date in a different format. (yyyy.mm.dd / dd-mm-yyyy)

  To get the current date I only use java script

  Formular1.p1.date_YYYYmmDD::initialize - (JavaScript, client)
  
       var date = new Date();
      this.rawValue  =  date.toLocaleDateString();
  
  

  My first problem is (red): I get the date in English, but I want it in another language. As it was defined in the form settings

  

  My second question is: How can I format a date/time-sized (not a text field) in javascript with a model specific to the init event?

  It seems that my code in the init event replaces the model of the DateTime field configuration

  Here is my form, if anyone wants to check it out:

  https://Acrobat.com/#d=zeOMyj9MhBdYbVWk8S1pHw

  Hello

  I think that these two problems are the same, by setting a date/time field using the rawValue always format must be yyyy-mm-dd, if you use a different format, the value is just seen as text and poster without shaped.

  var date = new Date();

  this.rawValue = util.printd("yyyy-mm-dd", date);

   

  You can also set the formattedValue if you have a date in the correct format.

  var date = new Date();

  var currentLocale = xfa.resolveNode("#localeSet.#locale").name;

  var dateFormat = "date("+currentLocale+"){DD MMM, YYYY}"

  this.formattedValue = util.printd(dateFormat, date, true)

  This code assumes that the view model is date {MMM DD, YYYY}

  The date format specification is in the XFA http://partners.adobe.com/public/developer/xml/index_arch.html specification

  Concerning

  Bruce

• Why Lightroom does not change the creation date of the file? (Mac OS)

  I find that Lightroom changes the creation of files present during the incorporation of metadata. I noticed that this behavior is different from the bridge, which reaches to write metadata changes to the file without affecting the creation date, affecting only the modification date.

  I read in other threads that it doesn't matter when even because moving files between disks will write a new file and, therefore, a new date of creation, but if this can be true in some systems (I don't know) is certainly not the case with Mac OS. For example, I have files dating back at least 1998 which have been moved from disc to disc to disc but still retain their original creation date. Which is as it should be. For many of my older images, there seems to be no capture embedded recognizable don't date anyway, so the creation date of the file is the single timestamp.

  It seems quite logical that the modified date of a file must be updated to take into account that the file has been modified (for example if adding metadata), but it seems to make sense that the date of creation of the file should be kept as the date, this file has been created. Changing them both on the same date seems to be a needless loss of information.

  Some would say that the process of adding metadata to a file creates a new file, the creation date must be updated to reflect this. But I would say that the creation date should be which would include a normal user as the creation date. We do not expect the creation date to change everything simply because a file is rewritten to the disk (for example when the defragmentation), however technically accurate, it would be to say that it is a newly created file. And the difference in behavior between Bridge and Lightroom shows that there is some confusion on this subject.

  Photo software ignores generally the operating system created by file-modification dates, and when he is not ignoring them, treated generally in a non-standard way that varies from one program to a program.  Rather than rely on the dates of the files of the operating system, the photo industry has defined fields of metadata with all sorts of specific photos dates: capture date/time (when the shutter button is depressed), date/time of scanning (when a movie or a print image was scanned digitally), date/time software photo altered image or metadata date/time of GPS location.   While some photo software will attempt to maintain the dates of file-created and - updated, many programs and services Web will not (including, but not limited to, LR).  In addition, many utilities files not always to preserve created and set dates to day that you move, copy it, backup and restore files.

  Therefore, I highly recommend that if you care photo dates and times (as I do), so no matter which photo software you use, you store the dates of capture in pictures industry standard metadata by using the tools provided by LR and other photo software.   In this way, you migrate the program to the program over the years, are you more likely to preserve that important metadata.

  Old photos and scans without that metadata, when you first import into LR, LR will assume that the capture time is the hour of the modified file.  LR to rewrite the date of capture of metadata in the file by selecting and making the metadata you can do > edit Capture time, clicking OK and then by metadata > save metadata to file. You can do it in batch - choose all your old photos and make metadata > edit Capture time, click OK, to metadata > save metadata to file.  LR will affect its time updated each file capture time.   If you want to set the time captured in the file create time, select this option in the window change the Capture time before clicking OK.  But beware that many Windows and Mac file utilities cannot preserve create time, even if they retain changed time, in order to create your files time can be wrong.   And of course, make sure that your backups are up to date and valid before making any new procedure file with which you aren't familiar.

  But if you really want to use non-standard file dates to keep your metadata information, and you want Adobe to modify accordingly the LR, so please give your opinion and vote on it in the Adobe official feedback forum: Bug report: Lightroom modifies the image files creation date. This forum is a user forum in which is rarely involved Adobe, Adobe said they read every post in the forum comments (and sometimes they respond).

• problem with the backup data in text file

  Hello

  The problem I am facing wihile, saving the data in the text file is that everytime when I'm slecting the path of the façade, data that are recorded are added with the previous data, not only in the new text, the new data set is saved but also, is there any previuos run for the program , the corresponding data is also present in this text file.

  However, when I change the same ''(file path) to 'constant' in the control block diagram, and then add the path of the file, it doesn't have this problem. Basically, changing the "file path" constant in the diagram of control block (so that it is displayed in the front panel) is at the origin of the problem.

  Help, please!

  Thank you

  Your shift on the loop Register For is not initialized. It will keep the value of the string since the last time that he performed. That initialize and it should solve your problem.

• Master table shows only 5 rows

  Hello

  I use Oracle JDeveloper 11 g Release 2 (11.1.2.3.0).

  I have a picture of master ADF and a detailed in my application form but the main Table shows only 5 rows, I don't understand what is happening, in my database I have more than 5 lines (exactly 7) but table doesn't show him everything.

  Can someone help me with this?

  Thanks in advance!

  Check the size of the extraction of the iterator (pagedef) connections and check that your relay of query returns more than 5 lines.

  What is the code to display the master detail do you use?

  Timo

• RMAN recovery is data loss - tips welcome

  Hello
  
  I really need help here if someone is a guru RMAN n.
  
  
  Problem
  ------------
  
  The system I have recover aid that the rman backup below does not include the table that I created after the backup was completed, the database has been recovered, but somehow the creation and populating a table after the backup is complete have been lost. Can you see what I did wrong here, the text is based on an existing script I need to also change little this is used in Prod dystsems elsewhere
  
  DB is:-11.2.0.1
  
  
  Please adsvise where I'm wrong...
  
  
  Target of $ORACLE_HOME/bin/rman / log = $BACKUP_LOG < < EOF
  Run {}
  delete noprompt obsolete device type disk;
  affect the disc channel d1 device format type "$ORACLE_BACKUP_DIR_LOC/%Y_%M_%D/database_%U."
  allocate channel device d2 disc format type "$ORACLE_BACKUP_DIR_LOC/%Y_%M_%D/database_%U."
  backup as compressed backupset database include current controlfile;
  output channel d1;
  output channel d2;
  SQL 'alter system archive log current';
  affect the disc channel a1 device format type "$ORACLE_BACKUP_DIR_LOC/%Y_%M_%D/archivelog_%U."
  Backup to compressed backupset archivelog all;
  output channel a1;
  delete noprompt obsolete device type disk;
  }
  backup from the list;
  output
  EXPRESSIONS OF FOLKLORE
  
  
  What I've done
  ------------------
  
  Create a table and insert a line first (backup before): -.
  
  create table rman_test (empname varchar2 (20), varchar2 (20)) of the city.
  
  insert into rman_test values ('azar', 'riyadh');
  insert into rman_test values ('jabar', 'chennai');
  commit;
  
  Select count (*) in the rman_test;
  2 rows
  
  Run the script of backup as follows: -.
  CD/u01/scripts
  SH hot_backup_db.bash emrep/u01/backup/u01/scripts
  Parameter 1 - SID ORACLE
  Parameter 2 - directory where will backups rman
  Parameter 3 - directory where rman records go
  
  Create a table after backup so we can verify that the data is not lost
  
  create table rman_test1 (empname varchar2 (20));
  insert into rman_test1 values ('kareem');
  insert into rman_test1 values ('syed');
  commit;
  Select count (*) in the rman_test1;
  2 rows
  
  Stop and rename the db files to impersonate a systems crash
  
  Closing of the database '
  Rename/u01/oradata/emrep in emrep-ren
  
  Renamed the spfile;
  CD $ORACLE_HOME/dbs
  MV spfileemrep.ora spfileemrep.ora_ren
  
  Prepare for recovery
  
  Look at the rman backuplog: -.
  
  Search the DBID:-e, g, connected to the target database: EMREP (DBID = 4012088007)
  
  Looking for where are the backups spfile and controlfile;
  Item name: / u01/backup/2012_07_25/database_2jnh03ua_1_1
  Control file included: cash SNA: 1344967 cash time: July 25, 12 16:16:10
  Item name: / u01/backup/2012_07_25/database_2knh03uc_1_1
  SPFILE included: Modification Date: July 25, 12 14:27:55
  
  Note the path and the name of the backup items to the location of backup for the last backup.
  
  Recover the database (all nuked)
  ----------------------------------------------------------
  
  RMAN target /.
  the value of dbid 4012088007
  
  startup nomount
  
  Restore spfile to ' / u01/backup/2012_07_25/database_2knh03uc_1_1 ";
  
  Restore controlfile to ' / u01/backup/2012_07_25/database_2jnh03ua_1_1 ";
  From restoration to 24/07/2012 10:32:24
  using channel ORA_DISK_1
  channel ORA_DISK_1: restore the control file
  channel ORA_DISK_1: restore complete, duration: 00:00:01
  output file name=/u01/app/oracle/product/11.2.0/dbhome_1/dbs/cntrlemrep.dbf
  Finished restore at 24/07/2012 10:32:25
  
  immediate stop
  startup nomount
  
  Restore controlfile to ' / u01/app/oracle/product/11.2.0/dbhome_/dbs/cntrlemrep.dbf';
  change the editing of the database;
  
  Catalogue backuppiece ' / u01/backup/2012_07_25/database_2hnh03u3_1_1 ";
  Catalogue backuppiece ' / u01/backup/2012_07_25/database_2inh03u3_1_1 ";
  Catalogue backuppiece ' / u01/backup/2012_07_25/database_2jnh03ua_1_1 ";
  Catalogue backuppiece ' / u01/backup/2012_07_25/database_2knh03uc_1_1 ";
  Catalogue backuppiece ' / u01/backup/2012_07_25/archivelog_2lnh03vg_1_1 ";
  
  restore the database;
  
  recover the database;
  
  This experience: -.
  
  Archives journal thread = 1 sequence = 49
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the command recover at 25/07/2012 13:42:54
  RMAN-06054: unknown request media recovery log archived for thread 1 with sequence 49 and from the 1330997 SNA
  
  
  ALTER database open resetlogs;
  
  Select count (*) in the rman_test;
  Select count (*) in the rman_test1;
  
  
  QL > select count (*) in the rman_test;
  Select count (*) in the rman_test1;
  
  COUNT (*)
  ----------
  2
  
  SQL > select count (*) in rman_test1
  *
  ERROR on line 1:
  ORA-00942: table or view does not exist
  
  How can I recover it?
  Welcome to all the advice I can get. Select count (*) rman_test1 should return 2 rows.
  
  Cheers, Rob Ford, DBA Oracle recent to rman

  RMAN-06054: unknown request media recovery log archived for thread 1 with sequence 49 and from the 1330997 SNA

  This sequence might not have been archived, and it could be your with the State CURRENT redolog file.

  During my recovery, give the path of your redolog file RUNNING when he asks sequence 49.

  SQL > restore database using backup controlfile until cancel;

  Published by: renee_mathieu on July 26, 2012 14:49

• Satellite P200-1EE Possible to recover data on the HARD drive by placing it in an envelope?

  P200-1EE does not start after 2 weeks off is the case during a fan installation. Is it possible to remove the hard drive, put it in an enclosure and retrieve the data it contains on another PC? Or can anyone recommend how to recover data from the comfort of my own home?

  Thanks for your help

  I would say that your installation of fan caused this problem in the first place. I would check your installation for loose connectors, cards not seated properly, no fan or heatsinks screws tight etc..

  Everything you did everything by installing the new fan plugged the laptop. The hard disk, in my opinion, is perfectly fine. There is nothing wrong with it.

  Put the suspect hard drive in an enclosed and try to access the data on another PC. You will encounter problems with administrator access to certain folders so you will need to find a way to crack in these areas.

  If you had problems in the first place you probably should have this return to the place of purchase for them to watch.

  I hope that for your sake you have not turned into a frisbee.

  Good luck.

• Executives ignored in the acquisition of images with 4 Configuration of the camera (cards 2 x 1430), record only half of the expected data

  Hi all

  I have a VI that puts in place a continuous grab for four camera link cameras at 100 Hz (512 x 640).  I have the cameras running on an external clock of 100 Hz for synchronization (comes from box NI DAQ, trigger ports on 1430 cards are not connected to anything).  The VI sticks all the frames in a queue, and then I (slowly) he writes to disk after that I get what I want.

  The problem is, for a minute 4 capture, I get only about 14 000 items in the queue instead of 24 000.  Also, each image gets populated with a number of buffer, so I can see it is missing all the other images or something like that, sometimes it will jump 10 in a row, sometimes it will jump rare... any ideas?

  Here is a picture of my installation of collection (Scripture on the part of the disk is not displayed, but that pours out of the queue is fine)-

  

  Hello

  I see a number of problems with the approach in your VI that I'll try to cover...

  Your consumption with queues and images won't work as you wrote because the images are a type of reference data and so put them in the queues is not copy data values, only the references. So if you keep to the same reference to the image in a queue, they are all pointing to the same data of the image (which may be substituted).

  A better approach is to have two queues of images, representing the 'free' pads and then one that represents the images 'full' (your queue current consumer). You would then have your acquisition loop pull a 'free' image, fill it with data via a Get buffer call and then queue it for your use. Your consumer could pull this queue, do its thing and then queue the image to the queue 'free' for the producer to use again.

  In addition, your code does not currently use the lower level is VI buffer, so you take advantage of the buffering model input-output IMAQ uses internally. The simple Grab acquire VI returns only the most recent image, but if you fall at all it does not use the FIFO. You want to call make buffer with a buffer incremeenting number so that you do not skip the buffers and are allowed to get behind up to the number of buffers in the buffers configured list.

  Eric

• How to add two lines when the second row is not visible, but also gets the first data line too?

  Mr President

  Jdev worm is 12.2.1

  How to add two lines when the second row is not visible, but also gets the first data line too?

  I want to add two lines like below picture, but want the second to remain invisible.

  

  I asked this question but my way of asking was wrong, that's why for me once again.

  Concerning

  Try to follow these steps:

  1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".

  2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)

  3. in your bookmark create button to create only one line NOT 2 rows.

  4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation

  5 - Open the generated class to EntityImpl and go to the doDML method and write this code

    protected void doDML(int operation, TransactionEvent e)
    {
      if(operation == DML_INSERT)
      {
        SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction());
        oracle.jbo.domain.Number seqValue = seq.getSequenceNumber();
        setJoinColumn(seqValue);
        insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      if(operation == DML_UPDATE)
      {
        updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      super.doDML(operation, e);
    }
  

    private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  
    private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  

• Hi, after all stages of extraction of data from oracle to oracle during the execution of command "start extract ext1" his error giving the Manager does not work, can you please help me. Thank you

  Hi, after all stages of extraction of data from oracle to oracle during the execution of command "start extract ext1" his error giving this handler does not run both source and target, can you please help me. Thank you

  Hello

  The setting should be as below, and not only the port number should be...

  PORT 7809

  Kind regards

  Veera

• How to use several adf 12 shape and insert the form data in to table during the click on "submit" button

  How to use several adf 12 shape and insert the form data in to table during the click on "submit" button. Can we use several form from adf or not?

  Make sure that you dragged the VO based EO.

  Also make sure that the VO attributes based EO Updatable property.

  The query according to VO is used only to add LOV to the column of the original VO ModelId.

  See you soon

  AJ