The recurrent scourge of "another memory".

Similar Questions

• How to remove the "another Memory" Macintosh HD?

  Hello

  So, I was see a gradual increase in the size of the 'other' memory of the Macintosh HD in the system that I use.

  A return of the week available space was 50 GB. Now, he has reduced to 30 GB.

  I use not all mobile devices to attach to this system.

  This system is used only for video editing.

  I only use Adobe software CC all and nothing else on this system.

  All my images, aftereffects, first pro files are stored on external hard drives.

  I wanted to know how can I reduce the size of this "another memory" Macintosh HD?

  Please advice.

  

  

  Post edited by: Khel now 2015

  'Others' consists of all not in the named categories, this will include contacts, calendars, OS X itself, all the documents that you did...

  In other words, look before you act.

• Satellite L755 - 16L gives the blue screen and physical memory dump

  Please advice

  I bought my L755 - 16L in the month of August.
  Until last week it went very well.

  Last week I'm going to visit another country he only has the 240V voltage.
  Normally at home, I use 100V power supply for my laptop.
  After my return when I connect top of laptop and the go blue screen screen work and grant discharge mini information of physical memory.

  Usually, I unplug the charger after the judgment.
  The next day if I start the computer, the computer gives the blue screen and physical memory dump.
  If not unplug the charger after stop down and don't use the next day then no problem.
  Please advice what can I do to stop this problem.

  This is the report of errors in Event Viewer.

  "The system has rebooted without judgment properly first. "This error can be caused if the system unresponsive, crashed or unexpected power loss.
  System

  -Supplier

  [Name] Microsoft-Windows-Kernel-Power
  [Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

  Event ID 41

  Version 2

  Level 1

  Task 63

  Opcode 0

  Keywords 0 x 8000000000000002

  -TimeCreated

  [SystemTime] 2011-11 - 27 T 10: 43:19.248036500Z

  EventRecordID 48763

  Correlation

  -Execution

  [ProcessID] 4
  [ThreadID] 8

  Channel system

  Computer toshiba-TOSH

  -Security

  [User name] S-1-5-18

  -EventData

  BugcheckCode 30
  BugcheckParameter1 0xffffffffc0000005
  BugcheckParameter2 0xfffff80003717ce5
  BugcheckParameter3 0x0
  BugcheckParameter4 0xffffffffffffffff
  Fake SleepInProgress
  PowerButtonTimestamp 0

  Hello

  In general the BSOD is the product of the problem of hardware or software problem. To check if it of software or hardware associated with deliver its necessary to reinstall the OS and check if the BSOD will appear using the new OS preinstalled.
  Of course, it s painful to do that because the recovery procedure would format the HARD drive and therefore the data backup is necessary!

  I don t think that the different input voltage might affect the functionality of the laptop computer because the laptop uses the universal adapter that supports entry 100V-240V.

  BSOD can be caused by faulty memory modules so I think that this test of memory could be useful also

• How to disable the database 64 MB of memory on Satellite Pro 4270?

  Hello!

  On my own SP4270 Win2000Pro install case that I came to the conclusion that the problem reside on the base 64 MB of memory on the motherboard, which had deserted somehow 1.1 MB, and so more big programs will not load and the installation procedure for Windows, as well as the entire machine will be completely stuck in about 5 to 10 seconds or at a very early stage in the process.

  But, I would like to have this made installation and in order somehow. Maybe the way is to disable the base memory and then just go with the sticks of memory on the upgrade of two memory locations.

  But, how to disable? Is the only way to throw the motherboard in the trash, or is there another way more decent to handle this, the BIOS v2.70 give any options at all for this...

  Best regards

  Pete v.

  Hello

  I'm scared of m it s not possible to remove the internal memory.
  It s part of the motherboard and if this memory malfunctioned the entire Board must be replaced or repaired.
  Unfortunately, you will contact a technician for repair, or you search for second hand motherboard.
  I prefer the second way, many people offers notebooks of second hand with grand jury

• my c drive shows low disk space, so I searched for the program that holds more memory on drive c. I got to know that this pagefile.sys has 3 GB in the c drive

  Hi, my c drive shows low disk space, so I searched for the program that holds more memory on the c drive. I came to know that pagefile.sys has 3 GB in the c drive, kindly guide me to move the pagefile.sys to another drive.

  Hi jafrin.michel,

  Thanks for posting in the Microsoft community.

  Before you start the troubleshooting steps, I need the information required.

  What version of the windows operating system do you use?

  Method 1:

  If you are using windows 7, I suggest to perform a disk cleanup and verify.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 2:

  If you want to move the pagefile.sys to another drive, follow the steps and check out them.

  Follow these steps to move the pagefile.sys to C: drive on D: drive (if you have the drive D :).

  1, write click on my computer and select Properties.

  2, click on the Advanced tab.

  3, click settings under performance menu.

  4, click on the Advanced tab and click on change.

  5, select letter (C :) and "BOLD" No pagefile then click on Set. )

  6, if you want to configure pagefile.sys in, select drive D: drive letter D: and "BOLD" in the custom size or the size of the system managed , then click on Set. It displays a pop-up message click OK.

  7, again click apply and OK OK.

  8, the system you will be asked to reboot, click on Yes.

  9, after rebooting the system, you can see the pagefile.sys will be moved to D:

• Explorer.exe error of Application the Instruction at '0x7c910ed2' referenced memory at 0x03ede088.

  always get this when I try to open certain files? any suggestion will be good?

  Explorer.exe error of Application the Instruction at "0x7c910ed2" referenced memory at "0x03ede088", the memory could not be 'read' click OK to terminate the program, click CANCEL to debug the program

  I also have error of Application Explorer.exe the Instruction "0x7c911689" referenced memory at "0 x 04180000", the memory could not be 'read' click OK to terminate the program, click CANCEL to debug the program

  Good.

  Not sure what it is yet, but you know what it is not.

  I don't know what to think of your permissions problem, but if records are read-only and not meant to be, are you not able to change the folder properties and what happens when you try to do?

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
  You can Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on.)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to act normally, you'll know that some extension you just disabled in this group of 3-5 is the culprit, then you can start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.

  Disable them one at a time or in small groups (to make things go faster) until your right click does not generate an error, and then restart and try again.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• When I close Wordpad I get this error: "the instruction at 0x7c910b2c referenced memory at 0x01c801c0. The memory could not be "written". »

  Every time I close wordpad in XP I get the same error message 'the instruction at 0x7c910b2c referenced memory at 0x01c801c0. The memory could not be "written". "

  When I click OK to close this dialog box comes another upwards, back to "the instruction at 0x7c910a19 referenced memory at 0x01c801c0. The memory could not be "read". "

  I don't have any idea what is wrong. I tried to remove and reinstall wordpad but that did not help.

  original title: Error closing wordpad

  Hello

  Disable DEP (Data Execution Prevention) for Wordpad and see if it helps.

  a: Click on Start > run

  b: Type Control Panel in the Run dialog box and click on enter.

  c: then click on System , then Advanced System settings.

  d: then click on the settings button under Performance.

  e: Then click on Data Execution Prevention tab.

  f: Now select the option " turn on DEP for all programs and services except those I select. "

  g: now click Add , and then select Wordpad.exe

  h: click apply , then ok.

  Hope this information helps.

• 5.7 Lightroom will not import. I get this message: the instruction at 0x17f3f885 referenced memory at...  Memory could not be read.  This program has been flawless for the past 3 weeks.

  5.7 Lightroom will not import. I get this message: the instruction at 0x17f3f885 referenced memory at...  Memory could not be read.  This program has been flawless for the past 3 weeks.

  Hello

  You really need a little more information such as operating system, memory, etc.

  Usually a mistake like this happens because a background process is running and interfere with the available RAM, not enough virtual memory (Windows), drivers of HW obsolete or just an incomplete installation.

  Or, one of the biggest problems is add-ons in internet browsers.

  Alternatively, another problem of Lightroom, no sufficient permissions on the directory where you import image files.

  Please provide a little more information.

• To access the backups Time Machine another computer

  I have spent a good hour looking for a solution to this problem, but have developed empty-handed.

  If I understand correctly, backups of access from another Mac time Machine, I need to connect the backup drive to another Mac and select "Browse Other Time Machine disks... "in the Time Machine dock menu and choose the drive.

  The backup drive appeared as expected and I clicked on "Use selected Disk" to enter the time Machine.

  At this point, the computer between what seems to be Time machine, but shows a Finder window to the hard disk of the computer rather than the backup drive and shows not all dates before "today (now)."

  A thread has suggested that I open a Finder window and select 'Computer' in the menu to reach before the opening of time Machine. It did not work.

  Another thread has suggested that I have use the Migration Wizard rather to recover files and folders, I need. This is not ideal, but I tried it anyway, the result being that the Migration Wizard app remained "Looking for source...". "without finding the backup drive.

  Before formatting my drive on the original Mac, I had checked for if ensure that I could access the Time Machine backup while it was plugged into the backup drive (which he successful well).

  I use the latest version of El Capitan 10.11.6 on a MacBook Air (mid 2011). Backup is a MacBook Pro (mid-2010) who ran as El Capitan.

  I would appreciate any other suggestions!

  So, I discovered the solution, which has been in a simpler way that I expected. Before opening, Time Machine, it is necessary to find the sparsebundle Disk Image in the backup disk in the Finder and open it with "DiskImageMounter." Then, you must select "Computer" in the Finder menu reach before choosing the option "Browse Other Time Machine disks... "menu to the dock of time Machine. The first finder window it shows in the Time Machine view still belongs to the computer, but now it shows the previous backups, who are all from the backup drive!

• What is the best way to add memory to disk to my Macbook Air?

  I got a 2013 13 "Macbook Air with 120 g of memory.

  I looked at my drop of memory available to a worrying 18 g even if my applications are only 9g and my office is 14g.

  I ran several management programs to clean up the disk drives, but my available storage is 18g / file.

  So now I am considering my options to get more storage.

  What I've read it seem a good idea would be to get a 128g Transcend Jetdrive.

  But then put my apps and my office on the Jetdrive only release 23g.

  So I would appreciate input from those more knowledgeable than myself.

  Is a Jetdrive my best option?

  What I could put on the Jetdrive to free more memory?

  Thanks in advance.

  Please read OS X El Capitan: increase the disk space.

• My browser is running do not. I uninstall, install several times. Uninstall cookies, delete the data from the user, install in another user - no reaction. What's wrong? Help, please

  My browser is running do not. I uninstall, install several times. Uninstall cookies, delete the data from the user, install in another user - no reaction. What's wrong? Help, please

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

  Start your computer in safe mode with network. Then launch Firefox.
  Try the sites secure web. Is always the problem?

  Start the computer in Mode safe;
  Free online encyclopedia

• I have a column with two values, separated by a space, in each line. How to create 2 new columns with the first value in a column, and the second value in another column?

  I have a column with two values, separated by a space, in each line. How do I create 2 new columns with the first value in one column and the second value in another column?

  Add two new columns after than the original with space separated values column.

  

  Select cell B1 and type (or copy and paste it here) the formula:

  = IF (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  shortcut for this is:

  B1 = if (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  C1 = if (Len (a1) > 0, Member SUBSTITUTE (A1, B1 & "", ""), "")

  or

  the formula of the C1 could also be:

  = IF (Len (a1) > 0, RIGHT (A1, LEN (A1) −FIND ("", A1)), "")

  Select cells B1 and C1, copy

  Select cells B1 at the end of the C column, paste

• Advice/cost for the upgrade of MacBook Pro memory

  I have a mid-2009 13-inch MacBook Pro. It has 2 GB of RAM and I want to update 8 GB of RAM. I heard it is expensive to have Apple install memory, but I really do not trust myself to install it alone! Does anyone have an idea of what it would cost (for the work of Apple and memory) for this upgrade? And if no Apple, anyone have any suggestions for qualified but cheaper alternatives? Thank you!!

  Dailey,

  You can upgrade RAM yourself at a reasonable cost.

  

• If I save bookmarks manually and the place it on another computer, are also my passwords to connect to these bookmarks will be transferred?

  Hi guys! Hope you're doing great!

  I want to give some very important bookmarks to a colleague, but for most of them, I have the passwords saved in Firefox (Linux 14.0.4 LTS) 34.0.

  I am afraid that him giving the bookmarks that I have downloaded onto my PC from the option import and export bookmarks, also give passwords to connect to them.

  Is it that this will happen or it is authorized to send necessary bookmarks? I don't have another PC on which I can test that for the moment.

  I searched through these recommended articles:
  -Can I restore my favorites if they were registered to the same profile on another computer?
  -Why firefox alters my favorites each time that I load it on another computer?
  -How can I move all my favorites of different Firefox profiles in a field to organize them and then place them in different Firefox profiles?
  -Where are my credentials stored?
  -Restore the Favorites from a backup or move them to another computer

  Thank you very much!

  Thank you very much for the reply!

  I wishyou a beautiful day!

• Thunderbird accounts disappeared after having copied the .thunderbird folder in another folder for backup (always went after the removal of duplicates)

  Hello

  I copied the .thunderbird folder to another folder on my computer (Ubuntu on Dell Laptop) for back up, re-open Thunderbird: accounts all parties; asking me to set up an e-mail account. I deleted the duplicate folder, but Auditors have always disappeared when I restart (.thunderbird original file still in the original location).

  I tried to use the profile to find/reactivate Manager profile as suggested on the support page (creating a profile with my name instead of the random.default profile) online - but it did not work.

  I'm reasonably computer literate but not a developer/programmer normal language would be appreciated!

  Thank you.
  Adrian

  It me - confused things fixed which happened, but fortunately I have lay profile .default right in the end!