The repository can be opened read-only

Similar Questions

• InDesign CS6 link opens read-only - cannot edit and save

  I have an an ID document nested in another document and every time I try to change the parent document alone open read-only. Also, if I try to save it I get:

  "Unable to save the document. It can be opened by other applications. Close other applications and try again. Alternatively, you can use Save as to save it in a new document. »

  If I try and open the nested file separately after this he also open in read-only and returns the same error when I try to save. Even when I close all other documents CS6 first. I need to quit Indesign and restart in order to open the file and save normally.

  It seems to be locked by ID, but the properties of the file in Explorer show unalterable as disabled. But he is stuck in the system too because I can't open it from Explorer.

  I tried to export the indd files parent and child to idml and then saved as new files indd and relinked them but they always make the same behavior in ID.

  It's very frustrating because I can't change the original of ID, and if I accidentally do, ID breaks the file (being locked, unalterable and unrecoverable) so I need to record in as long as something different, leave ID, rename it and start over.

  Windows 7 x 64 Indesign CS6

  Found the culprit! Extensis Suitcase Fusion Plugin ver 15.0.3.479. Had to disable the plugin, unfortunately not longer automatic font substitution!

• Several Applications using UDP Multicast Open (read only) on the same port

  Hi all

  Currently, I am trying to build a system that has the following architecture:

  RF Server = "1-9 A/D '-> «UDP Multicast (write-only) 1-9"»

  Workstation operator = "QTY (N) Data Display Apps all need independently to access one of the 9 UDP multicasts at a time.

  Essentially, I have 9 items of antenna that all digitized and distributed via UDP separate multicast address and port. On the receive side I need to be able to have the N number of data display applications where everyone can select the antenna element he wants to get data from. My current goal for N is 7 and the worst case for the data rate is 3.75 MSps IQ rates on each display.

  My question is whether or not it is possible to have several "UDP Multicast Open (read only)" on the same port but one by application Data Display? Also, are there limitations with this.

  On my local machine I tried a bit with the example 'UDP Multicast Sender.vi' and "UDP Multicast Reciever.vi". I created a "UDP Multicast Reciever2.vi" as another application that listens on the same port/Multicast address as the original receiver. No errors are thrown when you run the receivers and both receivers get the data string sent by the sender at the same time. Can I send data/a. 'PC'-> 'Router Ethernet'-> 'PC with receiver UDP N' reliable evidence? If so, that's fine, because it would be relatively easy to implement. BTW, I do not fear with occasional loss of data what is happening with UDP.

  If this does not work, I am also curious to know which deals with data deduplication. For example, two applications by subscribing to the same Multicast address and port does the router send two copies (which increases network traffic)? Or, the Windows operating system get a single UDP packet to the port and replicate in two independent applications?

  Below (or attached) are the two methods I thought. If multiple readers of UDP does not work so I thought I'd do a DataSocket "Data Distribution layer" between the incoming UDP sockets and display data on the workstation applications. This would add a bit of memory/processor to the PC workstation, but I know the DataSocket server of NOR can handle a sender unique multiple receiver architecture.

  

  

  Thank you

  Tim S.

  Hi Tim,.

  The number of concurrent applications, get data on the same port UDP will probably be a limitation of the OS as well. If I had to guess, I would say that 7 of the applications should work correctly. In fact, the memory/CPU bottlenecks are probably the limit on how many simultaneous readers we have, especially since the capablities of PC hardware differ from one computer to the other. I doubt that the OS has a strict limit.

• How can I uncheck "read only" in the download folder in a way that it will remain disabled

  How can I uncheck "read only" in the download folder in a way that it will remain disabled

  If done through properties does not stick, have you tried running the command attrib-r at the command prompt?

  Click Start, click run, type cmdand press ENTER.
  To view the syntax for the Attrib command, type attrib /? at the command prompt.

  Check MS article for more details.
  You cannot view or change the read-only or system attributes:
  http://support.Microsoft.com/?ID=326549

  I guess that you are authorized to make changes on this file, if it does not play here.
  How to set, view, change, or remove special permissions for files and folders in Windows XP
  http://support.Microsoft.com/kb/308419

• DataGuard open read only mode: PING [ARC2]: unable to connect before Heartbeat "keeps." The error is 88.

  Hello

  I created a data guard with 1 physical and 1 relief database.

  Database: 11.2.0.4 - Enterprise edition

  Everything is OK, if the wait is still in State of Mount.

  but.

  When I want to open the day before in read-only mode, log shipping is stop.

  I found az error in the primary newspaper:

  PING [ARC2]: Unable to connect to the standby Heartbeat "keeps." The error is 88.

  
  

  The newspaper of Eve:

  alter database open read only

  AUDIT_TRAIL initialization parameter is changed to OS, as DB is NOT compatible to the database open with read only access

  Wed Dec 03 12:02:02 2014

  SMON: enabling cache recovery

  Dictionary check start

  Verification of the complete dictionary

  Database character set is AL32UTF8

  No Resource Manager plan active

  off replication_dependency_tracking (no replication multimaster async found)

  Physical standby database opened for read only access.

  Completed: alter database open read only

  Wed Dec 03 12:02:03 2014

  Mo 4977 db_recovery_file_dest_size is 2.29% used. It is a

  user-specified limit on the amount of space that will be used by the present

  for the files related to the recovery of databases and does not reflect the amount of

  space available in the underlying file system or ASM diskgroup.

  Thanks for your help and sorry for my bad English.

  LACI

  Oracle error: ORA-00088

  Error description:
  Cannot be executed by the shared server

  Cause of the error:
  Debug command issued on a shared server.

  Action:
  Run the command again using a dedicated server.

• Can hyperic agents collect metrics from a server where the 'root' FS went to ' read-only '?

  Hello

  Can agent hyperic able to collect measures from a server where the 'root' FS went to ' read-only '?

  IE will be hyperic monitoring work if 'root' FS managed server went to fashion 'read only '?

  Thank you

  The agent record metric data in the local server in the data directory.

  These data will be sent to the Hyperic server.

  As a result, the agent must write permissions on local storage.

• In Windows 8 x 64, can not remove read only file attribute custom

  When I create the new folder in the D drive, not in the system, it was always read-only. When I change through properties and uncheck the read-only box, seems ok. but when I open again the properties, it is always read-only. I try using the command prompt command (admin) prompt using atrrib - r folder/s/d and does not yet work. I tried to change the security or aid of appropriating still won't change anything. This problem is not my xampp works well, keep showing me forbidden access with the document read-only as the alert. can someone help me with this thing read-only.

  NOTE: I have my disabled UAC, it is the custom folder and not in the system

  It worked for me.

  for the record

  attrib - r c:\my-folder

  and files

  attrib - r c:\my-folder\*.*

  Does the work. I had problem with PhpStorm. It was not able to save files to the project due to the read-only State.

  After doing this in CMD as administrator, all right.

• Error: unable to copy to the output directory, destination is read-only

  Hello...
  
  Help, please...
  
  I have a project that I just check in the files + files to harvest. After I deleted all the elements I have just check-in, I again opens the project in Jdeveloper, but when I recompile and run I hit this error:
  
  Error: unable to copy to the output directory, destination is read-only
  
  Help, please... I can't do anything on this subject as it is to show read-only... When I try to compile the java files even case:
  
  Error writing class java.io.IOException: cannot create output file
  
  
  Help, please...

  Hello

  In Jdeveloper, right-click on the project and go to the project properties menu

  In the content of the project, you can see the output directory path field,

  go to the path and give all the permissions in the folder

  I'm not sure what harvest is, but check if this helps you

  Concerning
  Ravi

• How the hell can I open this PDF file? !!!

  Original title: how the hell can I open this file? !!!

  I have files which are "PDF" files, but I can't open them.  What I am doing wrong?

  Do you have a PDF Reader installed?

  Adobe Reader
  http://get.Adobe.com/reader/

  Foxit Reader
  http://www.foxitsoftware.com/PDF/reader/

  Adobe is more "well known", but Foxit is much more compact and my personal preference.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Is there a file converter or the codec available to open/read files .vvf

  reading cctv .vvf file

  Is there a file converter or the codec available to open/read files .vvf

  Help, please

  thanx

  Nev

  Have you tried VLC Player?

  VLC Media Player - he can play almost all audio and video files:

  http://www.videolan.org/VLC

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

• Cannot open the document. You may not have permission or the document can be opened already.

  Whenever I try to open a document on our Mac server I get this error message: "cannot open the document. You may not have permission or the document can be opened already. "After that, I click Ok and then am able to open it. What is interesting is that immediately after the first time I try to open the file and get the error message that I noticed a .idlk (file locking) gets created even if she could not open. After that, I open it. Then, once I close it, the lock file goes.

  Someone knows something about this problem? For this particular user permissions are read/write on the file and all documents.

  Yosemite 10.10.3

  InDesign CC 2014

  Well, the problem has been resolved. It ends up being ESET antivirus v.4.xx for

  company. After I disabled it temporarily everything worked normally. So created

  exclusions for the shared network resources that they are working for.

• Cannot open read-only standby

  Hi all
  
  I appreciate your time on this.
  
  
  SQL > alter database open read-only.
  alter database open read only
  *
  ERROR on line 1:
  ORA-01092: ORACLE instance is complete. Disconnection forced
  
  Note: I've cancelled the recovery before that.

  Hello

  You try to start sqlplus and post the result:

  sqlplus
  SQL*Plus: Release 10.x.0.y.0 Production ...
  

  If the Oracle database software is different from 10.2.0.1, then you couldn't open your database without using the upgrade mode.

  If this is the case, it may mean that you don't have the same version of Oracle between the primary and the installation of Oracle pending is not recommended for Dataguard, you should be able to switch.

  Hope this helps.
  Best regards
  Jean Valentine

• I encounter the error (can not open key: HKEY_local_machine32\software\microsoft\windows\currentversion\run...) during the installation of iTunes and QuickTime on my laptop.

  I encounter the error (can not open key: HKEY_local_machine32\software\microsoft\windows\currentversion\run...) when installing iTunes and QuickTime on my laptop (Windows 7, 64-bit operating system).  Tried to change the registry key to make sure that I had (full control) in the registry key main (HKEY_local_machine\software) and all of its subkeys (including \Wow6432Node and \Microsoft) and restarted my PC.  But I still get the same error message.  What Miss me?

  ORiginal title: HKEY_local_machine32\software\microsoft\windows\currentversion\run

  I tried all the advice support online from Apple without success.  Then I called Apple support and they want to charge me a fixed fee of $19.95 to Troubleshoot modifying registry keys with me.  I refused, and this is why I post this question on the Microsoft Forum.

  Did you follow this advice?

  "Did you download and save iTunes on the desktop > then right click > select run as administrator to install.

  And do you have displayed in iTunes community that is free to do?

  Ask the question in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

• How to make all the fields on one page read only (for the recipient) without having to make each field read-only?

  How to make all the fields on one page read only (for the recipient) without having to make each field read-only?

  Hello Jmbtexas4,

  By default, you will need to individually click on the fields of the form and check the 'read only' and save it. From now on, it is not possible to select all together and make the changes.

  -Usman

• I can't open a pdf file of network.  I get the error, "there was an error opening this document. This file is not found. "If I copy it to the desklop can I open it.

  I can't open a pdf file of network.  I get the error, "there was an error opening this document. This file is not found. "If I copy it to the desklop can I open it.

  I have Adobe Acrobat XI version 11.0.12 and running windows 8.1

  Hi brianh66664582,

  Try the solutions suggested in this thread Re: could not open the files on the network server..

  Kind regards

  Nicos